Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Open Wheel Brakes & Hubs At Speedway Motors

Speedway Motors has the brake components you need for the rigors of open wheel racing. We carry top quality rotors and calipers for Sprints, Mini Sprints, and Midgets, as well as lightweight aluminum hubs to mount your brakes. Our complete assortment of brake pads will help you dial in your brakes for track conditions. Choose from a great selection of master cylinders and high temp racing brake fluid as well. Trust Speedway Motors with all your sprint car braking needs!

Featured Products
Speedway Disc Brake Residual Valve, 2 PSI, Purple
Speedway Disc Brake Residual Valve, 2 PSI, Purple
SKU-91031345
x
            

Ever had problems with a spongy pedal or slow, unresponsive brakes? If so, you may need a residual pressure valve installed in your brake line. A residual valve acts like a one-way or check valve to maintain brake system pressure to eliminate the problems of a spongy pedal. This 2 PSI residual valve is installed inline between the master cylinder and disc brake calipers to keep 2 PSI of residual pressure at the caliper after the brake pedal is released. This ensures that you will have a high, firm pedal next time you press the brake pedal.

If your master cylinder is located below the floorboard, installing a 2 PSI residual valve is highly recommended. If your master cylinder is mounted on the firewall, a residual valve is generally not needed because gravity will provide a natural residual pressure within the brake line.

Our residual pressure valve features a distinctive purple anodized finish with 1/8" NPT port at each end. Use 2 PSI residual valves for disc brake applications only.

Wilwood High Volume Aluminum Master Cylinder
Wilwood High Volume Aluminum Master Cylinder
SKU-835260676
x
            

Wilwood high-volume aluminum master cylinders have the highest fluid capacity of any integral reservoir design. With a total capacity of 8.2 ounces, there is at least 26% more fluid than most competitive brands. More fluid volume means cooler temperatures and additional insurance for extreme conditions where high pad wear can compromise fluid levels during long events. With 1-7/16" of piston travel, there is plenty of margin when used with large four or six piston calipers.

An internal slosh baffle guarantees a constant fluid supply to the bore chamber during hard cornering, acceleration and braking. This unique baffle also eliminates aeration into the reservoir from return fluid that can occur during brake release and bleeding procedures.

  • Die-cast from high-grade aluminum
  • Heavy-duty internal piston springs provide fast retraction for immediate release and positive fluid transfer without the need for cumbersome external pushrod springs
  • Pedal feel is improved, piston retraction is guaranteed, fluid recovery is quicker and the bleeding process is simplified
  • Formed steel lids, heavyweight bail wires and bellows type gaskets keep the fluid in and the moisture out with correct pressure balancing during fluid displacement
  • 1/8"-27 NPT fluid port

835-260676 Instructions (PDF)

Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.

Wilwood Combination Remote Fill Master Cylinder Kit
Wilwood Combination Remote Fill Master Cylinder Kit
SKU-70174
x
            

Six different bore sizes and four different installation configurations are available in this master cylinder kit. Precision machined from high strength aluminum, this kit includes both small and large size reservoirs which can be mounted for more convenient service access. Standard mounting bolt hole configurations provide easy applications for racing and off road vehicles, specialty cars, recreation and industrial vehicles.

Bore sizes available include: 5/8", 3/4", 7/8", 13/16", 1", 1-1/8".

  • Includes small and large reservoirs which can be direct or remote mounted
  • Aluminum cylinder with plastic reservoir tank
  • Mounting flange is a vertical pattern on a 2-1/4" on center
  • Master cylinder has a single 3/8-24 brake line outlet
  • The two side mount holes are 3" from center to center

70174 Instructions (PDF)

Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.

Stainless 19 Inch Brake Line with 90 Degree End
Stainless 19 Inch Brake Line with 90 Degree End
SKU-91031892
x
            These high quality stainless steel, braided fluid lines have a 90° fitting on one end and a straight fitting on the other. They work well for brake lines, clutch lines and gauge lines. These are available with AN3 or AN4 fittings. Sold individually.

Select applicable length. AN size is the "-#" at the end of the part number.

"Open Wheel, Brake" Page 1 of 21

  • Wilwood 250-13365 NDLR Radial Mount Caliper Bracket 11.75-12.19 Rotors
    Wilwood 250-13365 NDLR Radial Mount Caliper Bracket 11.75-12.19 Rotors
    SKU-83525013365
    x
                

    These radial mount caliper brackets are designed for use with 11.75" to 12.19" rotors.  They fit Wilwood NDLR style racing calipers and come with all necessary hardware.

    • Radial mount caliper bracket kit
    • 11.75" to 12.19" rotors
    • Billet aluminum
    • Wilwood NDLR style calipers
    • Hardware included
  • Inboard Sprint Car Brake Kit w/ Drilled .810 Inch Iron Rotors
    Inboard Sprint Car Brake Kit w/ Drilled .810 Inch Iron Rotors
    SKU-91031980
    x
                Get the hot new Wilwood NDL caliper, 2 brake bads, axle clamp with bolts and Speedways solid mount, drilled 12.19" x .810" iron rotor. 

    Components available separately.

  • Wilwood 160-10475 Drilled Steel Scalloped Rotor, 11 x .310 - 3 x 5 In.
    Wilwood 160-10475 Drilled Steel Scalloped Rotor, 11 x .310 - 3 x 5 In.
    SKU-83516010475
    x
                

    Wilwood's Drilled Steel brake rotors provide a durable lightweight option in applications where sustained temperatures remain in the low to moderate range, and high heat spikes are only observed on an intermittent basis. Steel rotors are typically found in lighter weight open wheel cars such as sprints and modifieds. A special alloy and proprietary manufacturing processes give these rotors high resistance to thermal distortion with excellent friction and wear characteristics against the pads.

    • Solid steel 
    • Front mounted
    • Bolt Circle: 3 x 5"
    • Threads:  Thru
    • Weight: 3.2 lbs
    • Face: drilled & scalloped

    CRotor Measure Schematic 

    Steel Front Rotor Application Chart

  • AFCO 6690110 3/4 Inch Master Cylinder Rebuild Kit, Post January 2013
    AFCO 6690110 3/4 Inch Master Cylinder Rebuild Kit, Post January 2013
    SKU-1066690110
    x
                

    AFCO 3/4" master cylinder rebuild kit for AFCO master cylinders manufactured after January 2013

    Racer Note: Master cylinder bores are built with close tolerances. Stroking the master cylinder dry can cause damage to the internal rubber seals causing leaks, soft pedal, and lack of pressure. Never clean a master cylinder with carburetor cleaner or similar products as they will cause seal damage.

    Racer Note: When rebuilding brake master cylinders and calipers, always lubricate internal parts with brake assembly fluid before installation.
    This will keep seals and o-rings from becoming damaged by dry cylinder walls and pistons.

    Instructions (PDF) 

  • Wilwood 120-13529-BK Forged Dynalite-M Disc Brake Caliper, Black
    New
    Wilwood 120-13529-BK Forged Dynalite-M Disc Brake Caliper, Black
    SKU-83512013529BK
    x
                

    The Forged Billet Dynalite-M is specifically designed to enhance outboard clearance and is the basis for Wilwood’s new Classic Style brake kits. The latest applied developments and innovations in caliper design and manufacturing processes have resulted in substantial improvements in strength and performance over all comparable models.

    • Aluminum construction
    • Black Powder coat finish
    • 3.3 Pounds
    • Mount Center: 5.25 Inches
    • Mount Type: Lug
    • Mount Side: Universal
    • Type: Stainless
    • 4 Piston
    • Minimum Rotor Diameter: 10.00"
    • Maximum Rotor Diameter: 13.06"
    • Rotor Width: 1"
    • Piston Bore: 1.75"
    • Inlet Thread Size: 1/8-27 NPT
    • Strongest calipers in it's class, with weights starting at 2.80 pounds
  • Goodridge SP670-21 -2 AN Brake Line Kit, Mini/Micro Sprint
    Goodridge SP670-21 -2 AN Brake Line Kit, Mini/Micro Sprint
    SKU-96031850
    x
                Simply zip-tie this Mini/Micro Sprint AN2 soft line system in place of your hard-line to increase brake pressure, eliminate threaded joints, and add durability.  A direct replacement consisting of AN3 female ends and coated braided line.  Fits Stallard type chassis with elevated and cross mounted master cylinder.
            
  • Wilwood 230-10483 Dynamic S Mount Rotor Bolt Kit
    New
    Wilwood 230-10483 Dynamic S Mount Rotor Bolt Kit
    SKU-83523010483
    x
                
    These steel bolt kits from Wilwood Brakes work with dynamic rotor mount kits and feature a zinc coated finish. They include all hardware needed.
    • Dynamic S mount rotor bolt kit
    • Includes:
      • (8) 5/16" 12-point bolts
      • (8) T-Nuts
      • (8) Washers

     

  • 2 Piece Aluminum Inboard Clamp
    $189.99
    2 Piece Aluminum Inboard Clamp
    SKU-6261669
    x
                

    Clamps to Winters axle. Made for easy install of a inboard break system.

     

    • 7" 8- rotor bolt pattern. 

     

  • Goodridge SP670-22 -2 AN Brake Line Kit, Mini/Micro Sprint, Short Line
    Goodridge SP670-22 -2 AN Brake Line Kit, Mini/Micro Sprint, Short Line
    SKU-96031852
    x
                Simply zip-tie this Mini/Micro Sprint AN2 soft line system in place of your hard-line to increase brake pressure, eliminate threaded joints, and add durability.  A direct replacement consisting of AN3 female ends and coated braided line.  Fits Stallard type chassis with elevated and cross mounted master cylinder.
            
  • Wilwood 140-13502 Dynapro Single Rear Brake Kit, 10.2 In Alum. Rotor
    Wilwood 140-13502 Dynapro Single Rear Brake Kit, 10.2 In Alum. Rotor
    SKU-83514013502
    x
                

    The Dynapro Single Right Rear Sprint & Midget kits are a further evolution of a proven design from Wilwood’s 35+ years of engineering and producing the best open wheel braking systems. Dynapro single calipers have full 2.40 square inches of area for increased clamping force. Right Rear Kits contain Aluminum rotors for maximizing weight saving and maximizing brake torque. Right Rear brakes can also provide ‘loading’ the rear suspension for additional handling. Kits come complete with caliper, brake pads; caliper mounting brackets, caliper mount bolt kit and rotor.

    • Caliper:
      • Dynapro Single
      • Nickel plate finish
      • 2 piston
      • 2.40" piston area
      • Stainless piston
      • Lug mount type
      • 3" brake pad area
      • Polymatrix Q pad compound
    • Rotor:
      • Aluminum
      • Drilled
      • Black Electro coat
      • 10.2" O.D.
      • 0.31" width
      • Solid vane

    Note: This brake kit has an axle offset of 0

    14013502 Brake Kit Assembly Schematic

  • Heat Shield For 2 Inch Single Quick Change Pads
    Heat Shield For 2 Inch Single Quick Change Pads
    SKU-94031043
    x
                

    Made for Ultra Lite Brakes 100 Series Floating Caliper. Heat shield is .065" thick.

  • Wilwood 130-4955 O-Ring Kit for GM Caliper with 2-3/4 Inch Piston
    Wilwood 130-4955 O-Ring Kit for GM Caliper with 2-3/4 Inch Piston
    SKU-8351304955
    x
                These replacement o-ring seals from Wilwood are designed for use with GM style calipers with 2-3/4" piston diameter.
    • For Wilwood GM Caliper with 2.75" piston
    • 4/pk

    Racer Note: Racing brake calipers, if properly maintained, can generally be used for several racing seasons. Frequent replacement of the caliper pistons and seals will increase caliper life and performance.

  • AFCO 6630040 F88 Forged Aluminum Caliper, 1.25 Rotor, 1-3/4 Pistons
    AFCO 6630040 F88 Forged Aluminum Caliper, 1.25 Rotor, 1-3/4 Pistons
    SKU-1066630040
    x
                AFCO set out in 2012 to take their market leading  caliper to the next level. The previous billet calipers have been  winning races over the last 10 years. With race technology improving  over the years, they knew it was time to revolutionize their caliper  line. After testing the new calipers all summer with multiple wins and  over 5000 laps in some of the most punishing conditions, they are proud  to provide their customers with the best calipers in racing. Many racers  think that brakes don't matter and all calipers are created equal, but  we know from testing that these calipers help win races!
    • Stiffest caliper on the market
    • Less brake heat
    • Extra wheel clearance
    • Universal mounting
    • Forged 6061 aluminum construction
    • 1/8" NPT inlet port
    • Speed bleeders installed for quick and easy maintenance
    • Heavy duty steel bridge bolts add 10% increase in stiffness
    • Internal brake fluid passages
    • Billet pistons with hard coat anodizing
    • 3-1/2" mount spacing
    • For 1.25" thick rotors
    • 1-3/4" piston
  • Wilwood 140-11762 Titanium Inboard Brake Kit
    $1,004.99
    $1,107.99
    Wilwood 140-11762 Titanium Inboard Brake Kit
    SKU-83514011762
    x
                

    Dynapro Radial Sprint Inboard Kit Features: A fully engineered bolt-on brake system for sprint car quick change rears with 3.00 x 46 splined axles. With titanium or Super Alloy.810 vented discs and a newly designed dynamic mount rotor axle clamp, are the lowest rotating weights available for Sprint racing. The lightweight advantages of the titanium rotor are fortified with the high durability, long wear, and superior heat control properties of advanced PolyMetallic coating technology. Forged billet DynaPro radial mount calipers with Composition Metallic pads, produce superior stopping power and consistent fade-free response. Kit includes Axle Clamp with Dynamic Mount Rotor Adapter assembly with T-nuts and Radial Mount Bracket and mounting hardware.

    Instructions (PDF) 

  • AFCO 6620112 Remote Reservoir Master Cylinder, 1 Inch Bore
    AFCO 6620112 Remote Reservoir Master Cylinder, 1 Inch Bore
    SKU-1066620112
    x
                These new remote reservoir master cylinders from AFCO feature an  external return spring that maintains positive pedal  feel and helps  prolong pad life by ensuring quick reaction to released  pedal force.   Its slim design rubber boot allows easy installation into most pedal  assemblies with common dual-mounting bolt patterns.
    • External return spring maintains positive pedal feel and helps prolong pad life by ensuring quick reaction to released pedal force
    • Slim design rubber boot allows easy installation into most pedal assemblies
    • Common dual-mounting bolt patterns for most racing applications
    • 1" bore
    • Designed for standard 1/8" NPT fittings for easy replacement
    • Aluminum bore design with hard anodized piston

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.

  • Afco 6690292 Replacement Piston for 1.38 Inch F88 Forged Alum. Caliper
    Afco 6690292 Replacement Piston for 1.38 Inch F88 Forged Alum. Caliper
    SKU-1066690292
    x
                

    These replacement pistons are intended to service your F88 forged aluminum AFCO calipers with a 1.38" bore. 

    • For F88 AFCO forged aluminum calipers
    • 1.38" bore
    • Billet pistons feature hard coat anodizing that provides great wear resistance and long life
    • Includes: Replacement piston

    Racer Note: Racing brake calipers, if properly maintained, can generally be used for several racing seasons. Frequent replacement of the caliper pistons and seals will increase caliper life and performance.

  • 90 Degree -3 AN to 1/8 NPT Steel Adapter Fitting
    90 Degree -3 AN to 1/8 NPT Steel Adapter Fitting
    SKU-6174279
    x
                

    Brake Adaptor.

    • 1/8" NPT

     

  • Sprint Left Front Brake Kit with Speedway Brake Rotor
    Sprint Left Front Brake Kit with Speedway Brake Rotor
    SKU-91031960
    x
                We put together this left front brake kit for the racer looking for the best quality while keeping cost down. Included is a Wilwood Dynalite caliper with 3.25" mounts, 2 brake pads, a 10.875" aluminum Speedway brake rotor and mounting bolts. 

    Components also available separately.

  • Speedway Front Aluminum Drilled Brake Rotor - 10.125 x .312 Inch
    Speedway Front Aluminum Drilled Brake Rotor - 10.125 x .312 Inch
    SKU-9402700
    x
                

    Speedway's Aluminum Sprint Brake Rotors are machined from billet plate for excellent balance, flatness, and true rotation. Rugged construction resists thermal distortion while the black anodized finish prevents corrosion. Fits popular 3 x 5" Sprint & Midget front hubs.

    Works best with Speedway 156 pads or Wilwood PolyMatrix Q pads.

    Aluminum Rotors Application Chart

  • KSE KSM6002 Gen II Wing Valve Port Adapter Fitting, -3 Port to -4 AN
    KSE KSM6002 Gen II Wing Valve Port Adapter Fitting, -3 Port to -4 AN
    SKU-94032946
    x
                

    Special high-flow -3 O-ring boss to 37 degree JIC -4 AN fitting for KSE Gen II half box wing slider.

  • Winters Performance 3784 Forged Aluminum Splined Rear Hub, Gold
    Winters Performance 3784 Forged Aluminum Splined Rear Hub, Gold
    SKU-8023784
    x
                These Winters forged aluminum splined rear hubs fit Weld or Sanders wheels. Gold anodized. Lite, strong, dependable. Fits standard sprint car rear ends.
            
  • AFCO -4 AN Kevlar Brake Line
    From: $15.99
    AFCO -4 AN Kevlar Brake Line
    SKU-1066684054
    x
                These lightweight Kevlar brake lines are stronger than braided brake  lines.  They will take more abuse with less expansion and will not rub  off your paint like the braided lines can. 
    • Lightweight Kevlar brake lines are stronger than braided brake lines
    • Will take more abuse with less expansion
    • Will not rub off your paint like braided lines can.
    • AN -4 ends
    • Available in 12, 18, 22, 24, 30, 34, 38, or 48" lengths
  • Goodridge 15 Inch Braided Brake Line with 90 Degree End
    Goodridge 15 Inch Braided Brake Line with 90 Degree End
    SKU-91031898
    x
                

    These high quality stainless steel, braided fluid lines have a 90° fitting on one end and a straight fitting on the other. They work well for brake lines, clutch lines and gauge lines. These are available with AN3 or AN4 fittings. Sold individually.

    • Stainless steel
    • 90° fitting on one end and a straight fitting on the other
    • Brake lines, clutch lines and gauge lines
    • Available with AN3 or AN4 fittings
    • Sold individually

    Select applicable length. AN size is the "-#" at the end of the part number.

  • AFCO 2012-2053 Master Cylinder Push Rod
    AFCO 2012-2053 Master Cylinder Push Rod
    SKU-10620122053
    x
                

    Master cylinder replacement/repair parts for AFCO single piston aluminum master cylinders.

    Racer Note: Master cylinder bores are built with close tolerances. Stroking the master cylinder dry can cause damage to the internal rubber seals causing leaks, soft pedal, and lack of pressure. Never clean a master cylinder with carburetor cleaner or similar products as they will cause seal damage.

    Racer Note: When rebuilding brake master cylinders and calipers, always lubricate internal parts with brake assembly fluid before installation.
    This will keep seals and o-rings from becoming damaged by dry cylinder walls and pistons.

     

  • Swindell Series Titanium Sprint Car Brake Pedal For Raised Rail Chassis
    Swindell Series Titanium Sprint Car Brake Pedal For Raised Rail Chassis
    SKU-94055025
    x
                

    This Swindell Series brake pedal is constructed of tubular titanium for strength and saving weight. It measures 14.25" from center of mounting hole to bottom of the pedal. It measures 2 1/4" from mounting center to where the master cylinder attaches. Tubing is 1" O.D. and .040" wall thickness. The width of the pedal is 5" with a knurled finish for extra grip. 

     

  • Wilwood 270-10757 Rotor Hub Kit
    $295.99
    $318.99
    Wilwood 270-10757 Rotor Hub Kit
    SKU-83527010757
    x
                
    • Dynamic rotor mount with 6 x 5.5" bolt pattern
    • High strength lightweight aluminum
    • Includes rotor adapter and bolt kit
  • AFCO 7242-0074 F33i Series 1.75 Inch Caliper O-Ring Kit
    AFCO 7242-0074 F33i Series 1.75 Inch Caliper O-Ring Kit
    SKU-10672420074
    x
                

    Service Parts for US Brake F33i Series Calipers

    Racer Note: Racing brake calipers, if properly maintained, can generally be used for several racing seasons. Frequent replacement of the caliper pistons and seals will increase caliper life and performance.

    Caliper Piston Tech Note (Link)

     

     

  • Wilwood 150-9756K Dynapro Brake Pads for Titanium Rotor
    Wilwood 150-9756K Dynapro Brake Pads for Titanium Rotor
    SKU-8359756
    x
                

    These high-temperature racing pads manufactured by Wilwood measure .5" in thickness, 1.98" in width and 2.32" in height.

    • High friction throughout temperature range, High temperature range.
    • Formulation specific for use with Polymetalic coated rotors
    • Sold in set of 4 pads

    Tech Tip:  Only use full metallic pads on coated rotors.

    Brake Pad Brand Guide (Link)

    Learn how to properly Bed-In your brake pads by reading our tech article.  Bedding-In Brake Pad Procedure.

  • Afco 6690259 Bridge Bolt Kit for .810 Inch F33 Forged Aluminum Caliper
    Afco 6690259 Bridge Bolt Kit for .810 Inch F33 Forged Aluminum Caliper
    SKU-1066690259
    x
                

    These bridge bolt kits are intended to service F33 forged aluminum Afco calipers.  Their extreme duty steel construction adds 10-30% stiffness vs. billet caliper models.

    • For F33 Afco forged aluminum calipers
    • .810" caliper
    • Includes: Bridge bolt kit

    Racer Note: Racing brake calipers, if properly maintained, can generally be used for several racing seasons. Frequent replacement of the caliper pistons and seals will increase caliper life and performance.

  • Wilwood 120-1064 Billet Spot Caliper, 1.75 Piston, .12/.38 Inch Disc
    Wilwood 120-1064 Billet Spot Caliper, 1.75 Piston, .12/.38 Inch Disc
    SKU-8351201064
    x
                

    Wilwood’s 1.75” diameter single piston Billet Spot Caliper is ideal for Micro and Mini Sprint, Kart, Off Road, Motorcycle, Drag Race Spindle Mount and industrial applications. Designed for light duty use, this floating caliper weighs just 1.20 pounds and holds a round .25” thick, .7 cubic inch brake pad, and accommodates rotors from 6.00” to 13.00” diameter and widths starting at .12”. Maximum rotor width can be adjusted by specific bracket and spacer dimensions. The pads are held in place by stainless steel 10-24 x .38” long flat head cap screw (screws are included), and the caliper is available black anodized.

    • 1.75” diameter single piston
    • Micro and Mini Sprint racing applications
    • Hardware included
    • Black anodized finish
  • Henchcraft Mini Lightning Sprint Master Cylinder Bolt Kit
    Henchcraft Mini Lightning Sprint Master Cylinder Bolt Kit
    SKU-9708327
    x
                Mount a Mini Sprint master cylinder to your Lightning Sprint Henchcraft Chassis with these complete bolt kits.  They come complete with rod end for the cylinder push rod.

    Includes:

    • (1) - Precision 5/16" RH female heim
    • (1) - Aluminum 5/16"-24 RH 6 jam nut
    • (3) - 5/16"-24 X 3" SAE Grade 5 bolts
    • (3) - 5/16" SAE Hex Lock Nuts
  • AFCO 7242-0075 F33i Series 1.38 Inch Caliper O-Ring Kit
    AFCO 7242-0075 F33i Series 1.38 Inch Caliper O-Ring Kit
    SKU-10672420075
    x
                

    Service Parts for US Brake F33i Series Calipers

    Racer Note: Racing brake calipers, if properly maintained, can generally be used for several racing seasons. Frequent replacement of the caliper pistons and seals will increase caliper life and performance.

    Caliper Piston Tech Note (Link)

     

     

  • Wilwood 120-5081 Billet Dynalite Caliper for .380 Inch Rotor
    Wilwood 120-5081 Billet Dynalite Caliper for .380 Inch Rotor
    SKU-8351205081
    x
                

    The Billet Dynalite caliper is powerful, compact and super lightweight. Advanced computer engineering keeps this caliper extremely rigid, resulting in incredible brake torque at a bare minimum in weight, starting at 2.66 pounds.

    This Billet Dynalite caliper is a 5-1/4" mount caliper with four 1-3/4" stainless steel pistons.  For .380 rotors.

    Wilwood Specs Sheet (Link)

  • Ultra Lite Brake TS-810-1040-655 Midget .810 In Inboard Titanium Rotor
    Ultra Lite Brake TS-810-1040-655 Midget .810 In Inboard Titanium Rotor
    SKU-94031006
    x
                Save weight and increase braking with this lightweight brake rotor.  The .810"x 10.4" titanium rotor is ceramic coated for   durability and  performance.  The    FeatherLite Caliper combined with our Ceramic Coated   Titanium  Rotor offers the best braking ability for your Sprint Car!
    • Ultra Lite ceramic coated titanium rotor
    • Sprint or Midget inboard
    • .810" width
    • 10.40" diameter
    • 6 x 5.5" bolt circle
    • 36 vane
    • Floating mount type
    • Weighs 2 lb. 12 oz.

    Ultra Lite Midget ceramic coated titanium rotors are drilled and slotted.

  • Wilwood 260-13618 Remote Flange Mount Master Cylinder Kit, 5/8 In Bore
    New
    Wilwood 260-13618 Remote Flange Mount Master Cylinder Kit, 5/8 In Bore
    SKU-83526013618
    x
                Please view the product's page for more information
            
  • Wilwood 260-13622 Remote Flange Mount Master Cylinder Kit, 1 In Bore
    New
    Wilwood 260-13622 Remote Flange Mount Master Cylinder Kit, 1 In Bore
    SKU-83526013622
    x
                Please view the product's page for more information
            
  • Stallard Micro Sprint Left Front Brake Rotor
    Stallard Micro Sprint Left Front Brake Rotor
    SKU-9656300
    x
                This vented steel left front brake rotor is designed for Micro Sprint racing chassis. It bolts directly to your Stallard left front hub. 
    • 7.00" Diameter
    • Three - 1/4" mounting holes
    • 1/8" Thickness
  • Ultra Lite O-Ring Kit, 250 Series Midget Sprint 4-Piston Front Caliper
    Ultra Lite O-Ring Kit, 250 Series Midget Sprint 4-Piston Front Caliper
    SKU-950180240
    x
                

    These o-ring kits from Ultra Lite brakes are designed for use with the 250 Series Midget Sprint 4-Piston front caliper. O-rings are constructed of durable material to withstand abuse.

    • For 250 Series 4-piston front caliper
    • Piston o-ring
  • Afco 6690247 Bridge Bolt Kit for .810 Inch F88 Forged Aluminum Caliper
    Afco 6690247 Bridge Bolt Kit for .810 Inch F88 Forged Aluminum Caliper
    SKU-1066690247
    x
                

    These bridge bolt kits are intended to service F88 forged aluminum Afco calipers.  Their extreme duty steel construction adds 10-30% stiffness vs. billet caliper models.

    • For F88 Afco forged aluminum calipers
    • .810" caliper
    • Includes: Bridge bolt kit

    Racer Note: Racing brake calipers, if properly maintained, can generally be used for several racing seasons. Frequent replacement of the caliper pistons and seals will increase caliper life and performance.

  • Afco 6690271 Bridge Bolt Kit for .810 Inch F22 Forged Aluminum Caliper
    Afco 6690271 Bridge Bolt Kit for .810 Inch F22 Forged Aluminum Caliper
    SKU-1066690271
    x
                

    These bridge bolt kits are intended to service F22 forged aluminum AFCO calipers.  Their extreme duty steel construction adds 10-30% stiffness vs. billet caliper models.

    • For F22 AFCO forged aluminum calipers
    • .810" caliper
    • Includes: Bridge bolt kit

    Racer Note: Racing brake calipers, if properly maintained, can generally be used for several racing seasons. Frequent replacement of the caliper pistons and seals will increase caliper life and performance.

Goto Previous PagePrevious Page
1 2 3 4 5 ... 21