Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Filter

Page 1 of 42

Products

Brake

Shop Open Wheel Brakes & Hubs At Speedway Motors

Speedway Motors has the brake components you need for the rigors of open wheel racing. We carry top quality rotors and calipers for Sprints, Mini Sprints, and Midgets, as well as lightweight aluminum hubs to mount your brakes. Our complete assortment of brake pads will help you dial in your brakes for track conditions. Choose from a great selection of master cylinders and high temp racing brake fluid as well. Trust Speedway Motors with all your sprint car braking needs!

Featured Products
  • Wilwood 220-0063 Bleeder Screw Assembly, Single
    Wilwood 220-0063 Bleeder Screw Assembly, Single
    (Part #8352200063)
    x
                

    This bleeder repair kit allows you to repair and salvage those calipers that have a damaged bleeder. Simply drill and tap the caliper to 1/8" pipe thread and install this replacement bleeder assembly.

    Read more about bleeding brakes in our tech article, How To Bleed Your Brake Lines

  • 3/16 Inch Steel Brake Line
    From: $1.99
    Product Rating: 4.67 Stars
    3/16 Inch Steel Brake Line
    (Part #91031800)
    x
                If you choose to use inverted flare hardware on your car, Speedway can save you time, effort, and money. 

    These 3/16" mild steel "hard" lines bend easily and smoothly with hand tools, already have a double flare on each end, have male fittings threaded 3/8"-24 installed and have a 45° inverted flare.

    Double wall, copper plated steel brake line. High burst strength. Resistant to vibration and fatigue. 3/16" O.D. tubing. Each end flared with 3/8"-24 fitting. Seven different precut lengths available.

    Learn more about flaring lines and how to select proper automotive fittings by reading our tech article. The Principles of Automotive Fittings

  • Wilwood 260-3278 Residual Pressure Valve with Fittings
    Wilwood 260-3278 Residual Pressure Valve with Fittings
    (Part #8352603278)
    x
                
    These in-line pressure valves retain a minimum brake line pressure to help eliminate excessive pedal travel in disc brake systems. Residual pressure valves are made from billet aluminum with 1/8" npt female threads for the inlet/outlet and color coded for easy identification. Ideal for drag racing, circle track, street rod and many off road applications.

    The two pound valve is used in disc brake applications where the master cylinder is mounted below the horizontal plane of the calipers and fluid drain back occurs from gravity and vibration, thereby causing excessive caliper piston retraction and a longer brake pedal stroke. The minimal two pound residual pressure prevents fluid from flowing back without causing the brakes to drag.

    • Inlet Size: 1/8-27 NPT
    • Inlet Fit: 3/8-24 IF Female
    • Outlet Size: 1/8-27 NPT 
    • Outlet Fit: 3/8-24 IF Female
    • Rate: 2 lbs.

    Instructions (PDF)

    Brake System Builder's Tip (Link)

    Learn more about the proper uses of residual valves by reading our tech article. Brake System Selection

  • Mini-Sprint Axle Spacers
    From: $5.99
    Mini-Sprint Axle Spacers
    (Part #9601272)
    x
                CNC 6061 aluminum double flange spacers with radius cut to reduce rotating weight. Fit 1 ¾” axles. Available sizes: .150”, ¼”, ½”, ¾”, 1”, 1.180”, 1 ½”, 2”, 2 ¼”, 2 ½”, 2 ¾”, 3”, 3 ¼”, 3 ½”, 3 ¾”, 4”, 5”. 
            
  • Speedway 156 Hard Brake Pad
    $8.99
    Speedway 156 Hard Brake Pad
    (Part #9191566)
    x
                

    For Ultra Lite single piston floating caliper, Outlaw 1000 and Wilwood Dynalite Single.

    .450" thick, 1.97" long, 589 A Compound

    Tech Tip:  Only use full metallic pads on coated rotors.

    Brake Pad Brand Guide (Link)

    Learn how to properly Bed-In your brake pads by reading our tech article.  Bedding-In Brake Pad Procedure.

     

  • Wilwood 120-13529-BK Forged Dynalite-M Disc Brake Caliper, Black
    Wilwood 120-13529-BK Forged Dynalite-M Disc Brake Caliper, Black
    (Part #83512013529BK)
    x
                

    The Forged Billet Dynalite-M is specifically designed to enhance outboard clearance and is the basis for Wilwood’s new Classic Style brake kits. The latest applied developments and innovations in caliper design and manufacturing processes have resulted in substantial improvements in strength and performance over all comparable models.

    • Aluminum construction
    • Black Powder coat finish
    • 3.3 Pounds
    • Mount Center: 5.25 Inches
    • Mount Type: Lug
    • Mount Side: Universal
    • Type: Stainless
    • 4 Piston
    • Minimum Rotor Diameter: 10.00"
    • Maximum Rotor Diameter: 13.06"
    • Rotor Width: 1"
    • Piston Bore: 1.75"
    • Inlet Thread Size: 1/8-27 NPT
    • Strongest calipers in it's class, with weights starting at 2.80 pounds
  • Brake Pedal Tab
    $2.99
    Product Rating: 5.00 Stars
    Brake Pedal Tab
    (Part #91637068)
    x
                4130 steel brake pedal tab.

    Thickness: .125"
    Hole Dia: .375"
    Width: 1.000"
    Overall Length: 2.015"
    Lower arc center to hole center: 1.700"
  • Wilwood 220-0627 Bleed Screw Assembly Kit, 4 Pack
    Wilwood 220-0627 Bleed Screw Assembly Kit, 4 Pack
    (Part #8352200627)
    x
                

    This bleeder repair kit allows you to repair and salvage those calipers that have a damaged bleeder. Simply drill and tap the caliper to 1/8" pipe thread and install this replacement bleeder assembly.

    Read more about bleeding brakes in our tech article, How To Bleed Your Brake Lines. 

Filter

"Open Wheel, Brake" Page 1 of 42

Page 1 of 42

  • Wilwood 250-13365 NDLR Radial Mount Caliper Bracket 11.75-12.19 Rotors
    Wilwood 250-13365 NDLR Radial Mount Caliper Bracket 11.75-12.19 Rotors
    (Part #83525013365)
    x
                

    These radial mount caliper brackets are designed for use with 11.75" to 12.19" rotors.  They fit Wilwood NDLR style racing calipers and come with all necessary hardware.

    • Radial mount caliper bracket kit
    • 11.75" to 12.19" rotors
    • Billet aluminum
    • Wilwood NDLR style calipers
    • Hardware included
  • Inboard Sprint Car Brake Kit w/ Drilled .810 Inch Iron Rotors
    Inboard Sprint Car Brake Kit w/ Drilled .810 Inch Iron Rotors
    (Part #91031980)
    x
                Get the hot new Wilwood NDL caliper, 2 brake bads, axle clamp with bolts and Speedways solid mount, drilled 12.19" x .810" iron rotor. 

    Components available separately.

  • Wilwood 160-10475 Drilled Steel Scalloped Rotor, 11 x .310 - 3 x 5 In.
    Wilwood 160-10475 Drilled Steel Scalloped Rotor, 11 x .310 - 3 x 5 In.
    (Part #83516010475)
    x
                

    Wilwood's Drilled Steel brake rotors provide a durable lightweight option in applications where sustained temperatures remain in the low to moderate range, and high heat spikes are only observed on an intermittent basis. Steel rotors are typically found in lighter weight open wheel cars such as sprints and modifieds. A special alloy and proprietary manufacturing processes give these rotors high resistance to thermal distortion with excellent friction and wear characteristics against the pads.

    • Solid steel 
    • Front mounted
    • Bolt Circle: 3 x 5"
    • Threads:  Thru
    • Weight: 3.2 lbs
    • Face: drilled & scalloped

    CRotor Measure Schematic 

    Steel Front Rotor Application Chart

  • AFCO 6690110 3/4 Inch Master Cylinder Rebuild Kit, Post January 2013
    AFCO 6690110 3/4 Inch Master Cylinder Rebuild Kit, Post January 2013
    (Part #1066690110)
    x
                

    AFCO 3/4" master cylinder rebuild kit for AFCO master cylinders manufactured after January 2013

    Racer Note: Master cylinder bores are built with close tolerances. Stroking the master cylinder dry can cause damage to the internal rubber seals causing leaks, soft pedal, and lack of pressure. Never clean a master cylinder with carburetor cleaner or similar products as they will cause seal damage.

    Racer Note: When rebuilding brake master cylinders and calipers, always lubricate internal parts with brake assembly fluid before installation.
    This will keep seals and o-rings from becoming damaged by dry cylinder walls and pistons.

    Instructions (PDF) 

  • Wilwood 120-13529-BK Forged Dynalite-M Disc Brake Caliper, Black
    Wilwood 120-13529-BK Forged Dynalite-M Disc Brake Caliper, Black
    (Part #83512013529BK)
    x
                

    The Forged Billet Dynalite-M is specifically designed to enhance outboard clearance and is the basis for Wilwood’s new Classic Style brake kits. The latest applied developments and innovations in caliper design and manufacturing processes have resulted in substantial improvements in strength and performance over all comparable models.

    • Aluminum construction
    • Black Powder coat finish
    • 3.3 Pounds
    • Mount Center: 5.25 Inches
    • Mount Type: Lug
    • Mount Side: Universal
    • Type: Stainless
    • 4 Piston
    • Minimum Rotor Diameter: 10.00"
    • Maximum Rotor Diameter: 13.06"
    • Rotor Width: 1"
    • Piston Bore: 1.75"
    • Inlet Thread Size: 1/8-27 NPT
    • Strongest calipers in it's class, with weights starting at 2.80 pounds
  • Goodridge SP670-21 -2 AN Brake Line Kit, Mini/Micro Sprint
    Goodridge SP670-21 -2 AN Brake Line Kit, Mini/Micro Sprint
    (Part #96031850)
    x
                Simply zip-tie this Mini/Micro Sprint AN2 soft line system in place of your hard-line to increase brake pressure, eliminate threaded joints, and add durability.  A direct replacement consisting of AN3 female ends and coated braided line.  Fits Stallard type chassis with elevated and cross mounted master cylinder.
            
  • Wilwood 230-10483 Dynamic S Mount Rotor Bolt Kit
    Wilwood 230-10483 Dynamic S Mount Rotor Bolt Kit
    (Part #83523010483)
    x
                
    These steel bolt kits from Wilwood Brakes work with dynamic rotor mount kits and feature a zinc coated finish. They include all hardware needed.
    • Dynamic S mount rotor bolt kit
    • Includes:
      • (8) 5/16" 12-point bolts
      • (8) T-Nuts
      • (8) Washers

     

  • 2 Piece Aluminum Inboard Clamp
    $189.99
    2 Piece Aluminum Inboard Clamp
    (Part #6261669)
    x
                

    Clamps to Winters axle. Made for easy install of a inboard break system.

     

    • 7" 8- rotor bolt pattern. 

     

  • Goodridge SP670-22 -2 AN Brake Line Kit, Mini/Micro Sprint, Short Line
    Goodridge SP670-22 -2 AN Brake Line Kit, Mini/Micro Sprint, Short Line
    (Part #96031852)
    x
                Simply zip-tie this Mini/Micro Sprint AN2 soft line system in place of your hard-line to increase brake pressure, eliminate threaded joints, and add durability.  A direct replacement consisting of AN3 female ends and coated braided line.  Fits Stallard type chassis with elevated and cross mounted master cylinder.
            
  • Wilwood 140-13502 Dynapro Single Rear Brake Kit, 10.2 In Alum. Rotor
    Wilwood 140-13502 Dynapro Single Rear Brake Kit, 10.2 In Alum. Rotor
    (Part #83514013502)
    x
                

    The Dynapro Single Right Rear Sprint & Midget kits are a further evolution of a proven design from Wilwood’s 35+ years of engineering and producing the best open wheel braking systems. Dynapro single calipers have full 2.40 square inches of area for increased clamping force. Right Rear Kits contain Aluminum rotors for maximizing weight saving and maximizing brake torque. Right Rear brakes can also provide ‘loading’ the rear suspension for additional handling. Kits come complete with caliper, brake pads; caliper mounting brackets, caliper mount bolt kit and rotor.

    • Caliper:
      • Dynapro Single
      • Nickel plate finish
      • 2 piston
      • 2.40" piston area
      • Stainless piston
      • Lug mount type
      • 3" brake pad area
      • Polymatrix Q pad compound
    • Rotor:
      • Aluminum
      • Drilled
      • Black Electro coat
      • 10.2" O.D.
      • 0.31" width
      • Solid vane

    Note: This brake kit has an axle offset of 0

    14013502 Brake Kit Assembly Schematic

  • Heat Shield For 2 Inch Single Quick Change Pads
    Heat Shield For 2 Inch Single Quick Change Pads
    (Part #94031043)
    x
                

    Made for Ultra Lite Brakes 100 Series Floating Caliper. Heat shield is .065" thick.

  • Wilwood 130-4955 O-Ring Kit for GM Caliper with 2-3/4 Inch Piston
    Wilwood 130-4955 O-Ring Kit for GM Caliper with 2-3/4 Inch Piston
    (Part #8351304955)
    x
                These replacement o-ring seals from Wilwood are designed for use with GM style calipers with 2-3/4" piston diameter.
    • For Wilwood GM Caliper with 2.75" piston
    • 4/pk

    Racer Note: Racing brake calipers, if properly maintained, can generally be used for several racing seasons. Frequent replacement of the caliper pistons and seals will increase caliper life and performance.

  • AFCO 6630040 F88 Forged Aluminum Caliper, 1.25 Rotor, 1-3/4 Pistons
    AFCO 6630040 F88 Forged Aluminum Caliper, 1.25 Rotor, 1-3/4 Pistons
    (Part #1066630040)
    x
                AFCO set out in 2012 to take their market leading  caliper to the next level. The previous billet calipers have been  winning races over the last 10 years. With race technology improving  over the years, they knew it was time to revolutionize their caliper  line. After testing the new calipers all summer with multiple wins and  over 5000 laps in some of the most punishing conditions, they are proud  to provide their customers with the best calipers in racing. Many racers  think that brakes don't matter and all calipers are created equal, but  we know from testing that these calipers help win races!
    • Stiffest caliper on the market
    • Less brake heat
    • Extra wheel clearance
    • Universal mounting
    • Forged 6061 aluminum construction
    • 1/8" NPT inlet port
    • Speed bleeders installed for quick and easy maintenance
    • Heavy duty steel bridge bolts add 10% increase in stiffness
    • Internal brake fluid passages
    • Billet pistons with hard coat anodizing
    • 3-1/2" mount spacing
    • For 1.25" thick rotors
    • 1-3/4" piston
  • Afco 6651002 SR30 Compound Brake Pads for F88/SL Caliper
    New
    Afco 6651002 SR30 Compound Brake Pads for F88/SL Caliper
    (Part #1066651002)
    x
                

    Afco proudly offers its SR30 Compound Brake Pad for F88/SL Caliper. These brake pads have gone through extensive development and testing in the toughest racing environments. Their racing brake pads are derived from the latest materials in friction products and utilize the latest technologies in brake pad manufacturing. The SR30 compound was developed for the right fronts of dirt cars where low grip is needed to help build bias in the front brake system and help the car turn better when you have to use 4 wheel brakes.

    These AFCO Brake Pads fit in a F88 or SL style caliper. The SR30 compound was developed for the right fronts of dirt cars where low grip is needed to help build bias in the front brake system and help the car turn better when you have to use 4 wheel brakes. - See more at: http://www.afcodynapro.com/store?search_api_views_fulltext=6651002#sthash.sUZa4K8s.dpuf
    • Improved stopping power
    • High torque with excellent control qualities
    • Exceptional high temperature performance
    • User friendly/easy break-in
    • Exceptional pad and rotor wear
    • Made in the U.S.A.

     

     

  • Wilwood 140-11762 Titanium Inboard Brake Kit
    $1,004.99
    $1,107.99
    Wilwood 140-11762 Titanium Inboard Brake Kit
    (Part #83514011762)
    x
                

    Dynapro Radial Sprint Inboard Kit Features: A fully engineered bolt-on brake system for sprint car quick change rears with 3.00 x 46 splined axles. With titanium or Super Alloy.810 vented discs and a newly designed dynamic mount rotor axle clamp, are the lowest rotating weights available for Sprint racing. The lightweight advantages of the titanium rotor are fortified with the high durability, long wear, and superior heat control properties of advanced PolyMetallic coating technology. Forged billet DynaPro radial mount calipers with Composition Metallic pads, produce superior stopping power and consistent fade-free response. Kit includes Axle Clamp with Dynamic Mount Rotor Adapter assembly with T-nuts and Radial Mount Bracket and mounting hardware.

    Instructions (PDF) 

  • AFCO 6620112 Remote Reservoir Master Cylinder, 1 Inch Bore
    AFCO 6620112 Remote Reservoir Master Cylinder, 1 Inch Bore
    (Part #1066620112)
    x
                These new remote reservoir master cylinders from AFCO feature an  external return spring that maintains positive pedal  feel and helps  prolong pad life by ensuring quick reaction to released  pedal force.   Its slim design rubber boot allows easy installation into most pedal  assemblies with common dual-mounting bolt patterns.
    • External return spring maintains positive pedal feel and helps prolong pad life by ensuring quick reaction to released pedal force
    • Slim design rubber boot allows easy installation into most pedal assemblies
    • Common dual-mounting bolt patterns for most racing applications
    • 1" bore
    • Designed for standard 1/8" NPT fittings for easy replacement
    • Aluminum bore design with hard anodized piston

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.

  • Afco 6690292 Replacement Piston for 1.38 Inch F88 Forged Alum. Caliper
    Afco 6690292 Replacement Piston for 1.38 Inch F88 Forged Alum. Caliper
    (Part #1066690292)
    x
                

    These replacement pistons are intended to service your F88 forged aluminum AFCO calipers with a 1.38" bore. 

    • For F88 AFCO forged aluminum calipers
    • 1.38" bore
    • Billet pistons feature hard coat anodizing that provides great wear resistance and long life
    • Includes: Replacement piston

    Racer Note: Racing brake calipers, if properly maintained, can generally be used for several racing seasons. Frequent replacement of the caliper pistons and seals will increase caliper life and performance.

  • 90 Degree -3 AN to 1/8 NPT Steel Adapter Fitting
    90 Degree -3 AN to 1/8 NPT Steel Adapter Fitting
    (Part #6174279)
    x
                

    Brake Adaptor.

    • 1/8" NPT

     

  • Sprint Left Front Brake Kit with Speedway Brake Rotor
    Sprint Left Front Brake Kit with Speedway Brake Rotor
    (Part #91031960)
    x
                We put together this left front brake kit for the racer looking for the best quality while keeping cost down. Included is a Wilwood Dynalite caliper with 3.25" mounts, 2 brake pads, a 10.875" aluminum Speedway brake rotor and mounting bolts. 

    Components also available separately.

  • Speedway Front Aluminum Drilled Brake Rotor - 10.125 x .312 Inch
    Speedway Front Aluminum Drilled Brake Rotor - 10.125 x .312 Inch
    (Part #9402700)
    x
                

    Speedway's Aluminum Sprint Brake Rotors are machined from billet plate for excellent balance, flatness, and true rotation. Rugged construction resists thermal distortion while the black anodized finish prevents corrosion. Fits popular 3 x 5" Sprint & Midget front hubs.

    Works best with Speedway 156 pads or Wilwood PolyMatrix Q pads.

    Aluminum Rotors Application Chart

Goto Previous PagePrevious Page
1 2 3 4 5 ... 42