Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Open Wheel Body, Chassis, Seats, Gauges At Speedway Motors

Speedway Motors’ open wheel race car bodies and chassis components are second to none! Speedway has the best chassis, cage kits, seats, and parts for sprint cars and midgets from top names like Auto Meter, Eagle Motorsports and Spike Chassis. With a wide selection of sprint car hoods, racing seats, front or rear bumpers, side panels and safety armguards, it’s one stop shopping for all your Sprint car speed needs. Don't forget about our huge selection of midgets performance parts as well!

Featured Products
HRP Nose Wing with Straight or 60 Degree Side Boards
HRP Nose Wing with Straight or 60 Degree Side Boards
SKU-9403200
x
            

This is HRP's new nose wing design, which has recessed bracket mounts for mounting the wing off the sideboards or in the center of the wing. It’s available with two different foils – a 1" or 2" dish – and has large, Outlaw-style sideboards available in either a straight or 60-degree angle shape. Can be used on the front of any sprint car.

  • Nose wing measures 23.75" x 36"
  • Sideboards measure 12" x 25"

You install the sideboards, but all holes are drilled and rivets supplied for easy assembly.

Linear Actuator, 12 Volt Motor
Linear Actuator, 12 Volt Motor
SKU-91064290
x
            

Linear actuators are gear-driven drive motors that extend a shaft with 110 lbs. of force. Our 12V actuators are a universal design for custom installation and operation in countless applications. With built-in limit switches, ACME dive system, and a IP 63 dust and water resistant rating, they are ideal for automotive applications (trunk, hood, doors, etc.) as well as electric wing sliders for Mini Sprints. 

This linear actuator has a potentiometer and can be used with our controller # 910-64295. Available in 4", 6" or 8" strokes.

  • Load Capacity - 110 pounds
  • Static Load - 550 pounds
  • Speed at Max Load - 0.50 in/sec
  • Reccomended Fuse - 10 Amp
  • IP Grade - IP 63-total dust protection, water resistant
  • Pin Holes: 5/16"
  • Retracted Length: 246 mm (9.69")
  • Shaft Diameter: 20 mm (.787")
  • Size: 10-1/4" x 1-1/2" x 3"
  • Weighs approx. 2-3 lbs

Wiring Schematic (GIF)

Scale Pad Storage Box
$249.99
Scale Pad Storage Box
SKU-91082100
x
            

These scale pad storage boxes are the strongest around with the ability to hold up to 3000 lbs.  They feature two high-strength latches to secure your scale pads and two handles to make carrying your scale pad box a snap. 

  • Holds up to 3000 lbs.
  • High-strength securing latches
  • Aluminum/steel corners and edges protect during transport
  • FREE with purchase of select scale pad systems (60411500, 300500, 47572593, 300787, 300650, 47572609, 47572601, 300777, and 47572701)
Butlerbuilt E-Z Sprint Seat
$699.99
Product Rating: 5.00 Stars
Butlerbuilt E-Z Sprint Seat
SKU-202307
x
            From the first manufacturer to offer full containment seats comes a new option which offers all of the same protection for a fraction of the cost.  The E-Z line features the same quality, rigidity, and safety aspects you need to compete at the highest level.  The head and shoulder supports are covered with CarbonX® material and sized to fit a wide range of driver builds and profiles.  Choose from four sizes, black upholstery only.
  • 10° layback with no assembly required
  • Solid head surround and shoulder support system
  • Black velour rib cover and seat bottom upholstery
  • Four standard sizes: 14.5", 15.5", 16.5", and 17.5"

"Open Wheel, Body" Page 1 of 18

  • EMPI 62-2310 High Back Bucket Seat Cover, Black w/Square Pattern, Each
    EMPI 62-2310 High Back Bucket Seat Cover, Black w/Square Pattern, Each
    SKU-1412310
    x
                

    Add these thickly padded high grade vinyl seat covers for that one-off custom look and added comfort to your Poly High Back bucket seat (141-2300).  EMPI's seat covers are available in Black and come with snap fasteners secure and install easily. These covers also come with two harness slots, making them usable on many other manufacturers' poly seats.

    • Thick padded high grade vinyl construction
    • Designed for use with EMPI's Poly High Back seat (141-2300)
    • Black with square pattern
    • Snap fasteners
    • Dual harness slots
  • Stainless Steel Battle Bars, Left Side, Standard Rail
    Stainless Steel Battle Bars, Left Side, Standard Rail
    SKU-91073081
    x
                

    Stainless steel battle bars will fit any sprint car chassis, and great for short track, wheel banging action.

  • Eagle Micro Nose, Raised Center
    Eagle Micro Nose, Raised Center
    SKU-9601519
    x
                
            
  • Auto Meter 201009 Cobra Voltmeter Gauge, Short Sweep Electric, 2 Inch
    Auto Meter 201009 Cobra Voltmeter Gauge, Short Sweep Electric, 2 Inch
    SKU-182201009
    x
                

    This vintage instrument series is designed to accurately re-create the period correct details of the instruments used in the original Cobra Roadster while incorporating the latest technology advancements in performance gauges from Auto Meter. These black dial face instruments feature incandescent through the dial backlighting with white pointers, traditional numbers and tick marks, and are finished with flat glass and scalloped chrome bezels.

    • Short Sweep Electric Voltmeter
    • 8-18 V
    • Mounts in 2-1/16" Hole
    • Includes mounting hardware and Incandescent Backlighting
    • Requires 18 gauge electrical wire and ring or spade terminal connections for installation (not included)
  • Basket Rear Bumper
    $94.99
    Basket Rear Bumper
    SKU-91073078
    x
                

    Unpolished stainless steel rear "basket" bumper for sprints. Made from 1.00" O.D. tubing.

  • EMPI 62-2408 Poly Low Back Bucket Seat Cover, Black w/Square Pattern
    EMPI 62-2408 Poly Low Back Bucket Seat Cover, Black w/Square Pattern
    SKU-1412408
    x
                

    Add these thickly padded high grade vinyl seat covers for that one-off custom look and added comfort to your Poly Low Back bucket seat (141-2400).  EMPI's seat covers are available in Black and come with snap fasteners secure and install easily. These covers also come with two harness slots, making them usable on many other manufacturers' poly seats.

    • Thick padded high grade vinyl construction
    • Designed for use with EMPI's Poly Low Back seat (141-2400)
    • Black with square pattern
    • Snap fasteners
    • Dual harness slots
  • Simpson 2 Inch Dual Anti-Sub Belt, Latch and Link
    Simpson 2 Inch Dual Anti-Sub Belt, Latch and Link
    SKU-63031014
    x
                Dual anti-submarine strap measures 27" per side. Latch & Link, semi-adjustable. Offered in red, blue, or black. Designed for bolt-in installation.

  • Stallard Micro/Mini Sprint Engine Nerf Bar
    Stallard Micro/Mini Sprint Engine Nerf Bar
    SKU-9601114
    x
                

    These polished stainless nerf bars are designed to fit Eagle and Stallard style chassis.  They work to protect the engine of your Micro/Mini/600 sprint.

    • 3/4" diameter polished stainless
    • 9" length
    • 9.25" width, center to center
  • Outlaw Wings Jr. Sprint 18 x 24 Nose Wing
    Outlaw Wings Jr. Sprint 18 x 24 Nose Wing
    SKU-96077111
    x
                

    This nose wing from Outlaw Wings has a 24" wide by 18" long center section with side boards that are 8" wide by 20" long.  

    Outlaw Front Nose Wing

    • 18" x 24"
    • For junior sprints
    • Recessed rivets
    • Aluminum
  • Carbon Fiber Leading Edge Protector, Top and Nose
    Carbon Fiber Leading Edge Protector, Top and Nose
    SKU-91077400
    x
                

    Protect the front of your top and nose wings with these carbon fiber caps. They’re durable, easy to install with pop rivets, and maintain proper aerodynamics.

    • Used on sprint cars where you need to keep the leading edge of your wing clean 
    • Made of strong carbon fiber
    • Attach easily with a few rivets or even silicone
    • 60" x 6" top wing
    • 36" x 3-1/2" nose wing
  • Spike Chassis 353010 Midget Stainless Steel Front Bumper
    Spike Chassis 353010 Midget Stainless Steel Front Bumper
    SKU-9503010
    x
                This Spike Chassis Midget  Bumper is fixture fabricated from 7/8" OD Stainless Steel. Fits Spike, Stealth and other popular Midgets.
            
  • 25 Lb. Lead Ballast
    $79.99
    25 Lb. Lead Ballast
    SKU-91045002
    x
                Lead ballasts allow you to put the weight where you want it. Economical and hard-to-find. Perfect for 305 sprint car racing. 
            
  • KSE Sprint Wing Valve Tab
    $6.99
    KSE Sprint Wing Valve Tab
    SKU-91637100
    x
                

    These tabs work with all slider valves. They are a weld-on steel bracket for your Sprint or Midget race car.

    • Weld-On
    • Works with all wing slider valves
    • Steel construction
    • KSE style factory chassis component
  • Simpson 51201 Latch n Link Safety Belt w/Steel Adjusters, RH Ratchet
    Simpson 51201 Latch n Link Safety Belt w/Steel Adjusters, RH Ratchet
    SKU-63051201
    x
                

    These ratchet belts are available in right side, with steel adjusters.  Simpson's 5-point Sprint car latch and link ratchet restraint systems are SFI 16.1 certified and as always, made in the U.S.A.!

    • SFI 16.1 Certified
    • 5-Point Latch & Link
    • 2" over shoulders belt width
    • Steel Adjusters
    • Platinum Series
    • Fixed Left Side
    • Right Side Ratchet

    Speedy Tip:  Seat belts lose around 50% of their strength over a two year period due to the dirt, washing, and sunshine.  As a rule, seat belts should be replaced every two years.  Belts that have been through an accident should also be replaced due to the forces exerted on them.

  • Heel Floor Board Riser, 1-1/8 Inch
    Heel Floor Board Riser, 1-1/8 Inch
    SKU-91055001
    x
                These heel floor board risers offer an unique design with heel ramp. Raises heel 1-1/8". Lightweight. Pop rivet in.
            
  • Simpson Bolt-In Lap Belts, Cam Lock, Pull-Down
    Simpson Bolt-In Lap Belts, Cam Lock, Pull-Down
    SKU-63032024
    x
                Simpson bolt-in style lap belts wtih cam lock fastener. Available in red, blue, or black.
            
  • Speedway 14 Sq. Ft. Micro/Mini Sprint Top Wing Kit
    Speedway 14 Sq. Ft. Micro/Mini Sprint Top Wing Kit
    SKU-96077100
    x
                

    Top off your Micro or Mini Sprint car with a top-quality, money-saving Micro / Mini Sprint Top Wing Kit from Speedway Motors.

    Speedway’s new Micro / Mini Sprint Top Wing Kit is built from premium-quality aircraft aluminum to provide the strength and light weight demanded by top racers. The wing kit is easily assembled using countersunk rivets and features 54-inch offset sideboards and internal sliders. A quick-change wicker bill ensures easy adjustability between events; different wicker bill sizes are available separately. The Micro / Mini Sprint Top Wing Kit is economically priced under $400 and ships via standard UPS ground freight, saving you both time and money.

    Speedway 14 Sq. Ft. Micro/Mini Sprint Top Wing Kit

    • Premium aircraft aluminum
    • 54" offset sideboards
    • Countersunk rivets
    • Internal sliders
    • Quick change wicker bill
  • Stainless Nose Wing Strap
    $11.99
    Stainless Nose Wing Strap
    SKU-9401877
    x
                
    • Durable 304 stainless steel construction
    • Offset fits any chassis
    • Three height adjustments – 8.25", 8.75", 9.25"
  • Stallard Micro/Mini Sprint Fiberglass In-Rail Chassis Hood
    Stallard Micro/Mini Sprint Fiberglass In-Rail Chassis Hood
    SKU-96565011
    x
                
    These fiberglass racing hoods are specifically designed for use with 2014 Stallard in-rail chassis and come available in black or white gel-coat finish.
    • Micro/Mini Sprint racing cowl
    • Available in black or white gel-coat finish
    • Quality fiberglass construction
    • For use with Stallard in-rail chassis cars
  • Sweet Mfg. 306-10200 Wing Cylinder, 10 Inch
    Sweet Mfg. 306-10200 Wing Cylinder, 10 Inch
    SKU-94010200
    x
                The first 10" stroke wing cylinder specifically designed for oil use! Mate with Sweet valve for optimum performance. Rated to 1300 psi!
            
  • Fuelab 71501 Fuel Pressure Gauge, 0-120 PSI
    Fuelab 71501 Fuel Pressure Gauge, 0-120 PSI
    SKU-91071501
    x
                

    FueLab mechanical fuel pressure gauges featurea black housing with a white face and black text.

    • For use on regulators or fuel rails with gauge ports
    • Direct mount 1/8” NPT fitting
    • 1.5” diameter gauge face
    • Not for use in passenger or driver’s compartments
  • Speedway Chromoly Round Tube Rear Wing Tree
    Speedway Chromoly Round Tube Rear Wing Tree
    SKU-91077855
    x
                

    Get your sprint car top wing mounted with this tubular Chromoly wing tree. The X-style design has slugs and pins for height adjustment and a bracket welded on for the wing slider cylinder.

    This is a tubular adjustable Chromoly rear wing tree for sprint cars.

    • X-style design
    • Sturdy Chromoly construction
    • Has bracket welded on for wing slider cylinder
    • Has slugs and pins to adjust height
    • For mounting top wing on a sprint car
    • 24" fully extended
    • 18" collapsed
    • Slugs go in 1" increments
    • 26" mounting center for frame and wing 
    • 3/4" O.D. tubing

     

  • Eagle Motorsports MW-NWS-1125MS 3 Hole Adjustable Nose Wing Strap
    Eagle Motorsports MW-NWS-1125MS 3 Hole Adjustable Nose Wing Strap
    SKU-9601125
    x
                
    • Durable 304 stainless steel construction
    • Offset fits any chassis
  • Speedway LH Safety Arm Guard
    $74.99
    Speedway LH Safety Arm Guard
    SKU-94054017
    x
                

     

    • Fits newer raised cage chassis styles
    • Formed to have a snug fit around chassis and safety bar
    • Fiberglass construction, white or black gel coat finish

     

  • Lower V Brace for Regular Rear K Member
    Lower V Brace for Regular Rear K Member
    SKU-91637090
    x
                1" diameter 4130 Chromoly.  Coped and sized to match original factory pieces.
            
  • Billet Nose Wing Post Tube Clamp, 1.125 Inch Tube
    Billet Nose Wing Post Tube Clamp, 1.125 Inch Tube
    SKU-96012425
    x
                Machined to be aerodynamic - these tube clamps fit on your front torsion tubes for quick and easy adjustments or replacement.  Accept a 3/4" post, includes hardware. 
            
  • 3-Piece Side Panel - LH, Raised Rail
    3-Piece Side Panel - LH, Raised Rail
    SKU-9405613
    x
                

    Eagle Motorsports/Schnee Chassis factory-built component. Access your fuel system with ease using these inter-locking panels. 1/4-turn fasten together design allows quick entry to the cockpit without fighting the header.

    • Aluminum, plain finish
    • Works for new Eagle Motorsports/Schnee Chassis
    • 38" for raised rail car
    • Pre-cut holes for spuds
  • Standard Aluminum Nose Wing Post, Straight
    Standard Aluminum Nose Wing Post, Straight
    SKU-9401850
    x
                

    Support the nose wing on your sprint car with this strong, lightweight aluminum nose wing post.

    • Aluminum construction for light weight and durability
    • For mounting a nose wing on most sprint cars
    • Straight post that measures 13” long
    • 1" OD
    • 3/4"ID
    • 13" tip to tip length
    • 12-1/4"center of hole to bottom of post
    • 1/4" hole in post
  • Henchcraft Chassis Mini Lightning Sprint Right Hand Neft Bar
    Henchcraft Chassis Mini Lightning Sprint Right Hand Neft Bar
    SKU-9706403
    x
                

    New from Henchcraft Chassis, these right hand side nerf bars are designed for use on Mini Lightning Sprint 1000cc chassis.  They feature a 1" diameter tubing and stainless steel construction.

    • 1" diameter tubing
    • Ornamental grade stainless
    • Right hand side nerf
    • For use on Henchraft Mini Lightning Sprint chassis
  • Accutech 2-Gauge Oil Pressure & Water Temp Gauge Panel
    Accutech 2-Gauge Oil Pressure & Water Temp Gauge Panel
    SKU-91365441
    x
                

    All panels come with warning lights, senders and instructions. Includes an easy to hook up wiring harness.

  • Eagle Motorsports RH Sprint Car Safety Armguard Panel
    Eagle Motorsports RH Sprint Car Safety Armguard Panel
    SKU-9405608
    x
                Eagle Motorsports factory-built component. This right-side arm guard is constructed from  high-density fiberglass to withstand abuse from dirt, mud and rocks. Large size with extra material makes it easy to mate with any chassis configuration. 
    • Fits any RH safety bar
    • Mates to RH sail panel
    • No interference with full containment seats
    • Fiberglass construction, gel coat finish
    • Choose from black or white finish

     

  • Speedway Raised Rail Sprint Car Air Box
    Speedway Raised Rail Sprint Car Air Box
    SKU-9402073
    x
                

    Created from wind tunnel testing, this piece of formed aluminum does more than stop debris. Specifically engineered to maximize intake pressure and radiator air flow with optimized features. Quickly snaps into place in any frame design and fastens with quarter turn fastener buttons or zip ties. Designed specifically to work with Outlaw Clean Air Hood (940-54018). 

  • Adjustable Tubular Chromoly Nose Wing Straps, J&J, 8-3/4 - 10-1/4 Inch
    Adjustable Tubular Chromoly Nose Wing Straps, J&J, 8-3/4 - 10-1/4 Inch
    SKU-9401873
    x
                These chromoly straps have formed mounting tabs for greater stability and offer adjustments at 9", 9-3/4", and 10-1/2". Powder coated black.
            
  • Henchcraft Chassis Mini Lightning Sprint LF Radiator Side Panel
    Henchcraft Chassis Mini Lightning Sprint LF Radiator Side Panel
    SKU-97065008
    x
                

    New from Henchcraft Chassis, these aluminum radiator side panels are for use on Mini Lightning Sprint 1000cc chassis.  They are designed to channel air to and from the radiator while shielding the engine compartment from debris.

    • Channels air to and from radiator
    • Shields engine compartment from debris
    • For left front radiator side
    • Quality aluminum construction
    • For use on Henchraft Mini Lightning Sprint chassis
  • Simpson 2 Inch Single Anti-Sub Belt - Cam Lock
    Simpson 2 Inch Single Anti-Sub Belt - Cam Lock
    SKU-63034012
    x
                This Simpson 27" Anti-Sub belt is designed for easy bolt-in mounting.  Available in red, blue, or black. Cam lock.
            
  • King Racing Products 2330 Wing Ram Adapter
    King Racing Products 2330 Wing Ram Adapter
    SKU-9402330
    x
                Don't fight misalignment or bind.  Install this adapter to add 1 5/8" more length and additional movement to your wing ram.  Threads on any wing ram and accepts a 3/8" heim. 
            
  • Eagle Motorsports #2 Sprint Car LH Safety Armguard
    Eagle Motorsports #2 Sprint Car LH Safety Armguard
    SKU-9403825
    x
                
    Eagle Motorsports factory-built component. 
    • Fits 2012 and previous raked cage cars
    • 2" raised cage in rear only
    • Fiberglass construction, gel coat finish 
  • Sparco 00823NR Sprint V Racing Seat
    Sparco 00823NR Sprint V Racing Seat
    SKU-67400823
    x
                

    The Sprint V is our entry level competition seat, perfect for weekend racers. It carefully balances safety, styling and value. The fastenings for side or bottom attachments on the tubular frame are better positioned on the shell while the holes for fifth and sixth seatbelt points provide improved safety. This seat is made from fire retardant fabric and features contrasting quilting. Available in black. FIA approved.

    • Additional side attachment fastenings on the tubular for better positioning
    • Includes holes for fifth and sixth seatbelt points
    • Fire retardant fabric with contrasting quilting
    • FIA approved

     

  • Standard Aluminum Nose Wing Post, Curved
    Standard Aluminum Nose Wing Post, Curved
    SKU-9401855
    x
                

    Support the nose wing on your sprint car with this strong, lightweight aluminum nose wing post.

    • Aluminum construction for light weight and durability
    • For mounting a nose wing on most sprint cars
    • 1" OD
    • 3/4"ID
    • 1/4" hole in post
  • Auto Meter 5202 Liquid Filled Gauge Mounting Cup - Black
    Auto Meter 5202 Liquid Filled Gauge Mounting Cup - Black
    SKU-1825202
    x
                

    Mounting cup for use with 2-5/8" liquid filled gauges. Black.

    Mounting hardware and instructions are included.

Goto Previous PagePrevious Page
1 2 3 4 5 ... 18