Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Open Wheel Body, Chassis, Seats, Gauges At Speedway Motors

Speedway Motors’ open wheel race car bodies and chassis components are second to none! Speedway has the best chassis, cage kits, seats, and parts for sprint cars and midgets from top names like Auto Meter, Eagle Motorsports and Spike Chassis. With a wide selection of sprint car hoods, racing seats, front or rear bumpers, side panels and safety armguards, it’s one stop shopping for all your Sprint car speed needs. Don't forget about our huge selection of midgets performance parts as well!

Featured Products
HRP Nose Wing with Straight or 60 Degree Side Boards
HRP Nose Wing with Straight or 60 Degree Side Boards
x
            

This is HRP's new nose wing design, which has recessed bracket mounts for mounting the wing off the sideboards or in the center of the wing. It’s available with two different foils – a 1" or 2" dish – and has large, Outlaw-style sideboards available in either a straight or 60-degree angle shape. Can be used on the front of any sprint car.

  • Nose wing measures 23.75" x 36"
  • Sideboards measure 12" x 25"

You install the sideboards, but all holes are drilled and rivets supplied for easy assembly.

Linear Actuator, 12 Volt Motor
Linear Actuator, 12 Volt Motor
x
            

Linear actuators are gear-driven drive motors that extend a shaft with 110 lbs. of force. Our 12V actuators are a universal design for custom installation and operation in countless applications. With built-in limit switches, ACME dive system, and a IP 63 dust and water resistant rating, they are ideal for automotive applications (trunk, hood, doors, etc.) as well as electric wing sliders for Mini Sprints. 

This linear actuator has a potentiometer and can be used with our controller # 910-64295. Available in 4", 6" or 8" strokes.

  • Load Capacity - 110 pounds
  • Static Load - 550 pounds
  • Speed at Max Load - 0.50 in/sec
  • Reccomended Fuse - 10 Amp
  • IP Grade - IP 63-total dust protection, water resistant
  • Pin Holes: 5/16"
  • Retracted Length: 246 mm (9.69")
  • Shaft Diameter: 20 mm (.787")
  • Size: 10-1/4" x 1-1/2" x 3"
  • Weighs approx. 2-3 lbs

Wiring Schematic (GIF)

Scale Pad Storage Box
$249.99
Scale Pad Storage Box
x
            

These scale pad storage boxes are the strongest around with the ability to hold up to 3000 lbs.  They feature two high-strength latches to secure your scale pads and two handles to make carrying your scale pad box a snap. 

  • Holds up to 3000 lbs.
  • High-strength securing latches
  • Aluminum/steel corners and edges protect during transport
  • FREE with purchase of select scale pad systems (60411500, 300500, 47572593, 300787, 300650, 47572609, 47572601, 300777, and 47572701)
Butlerbuilt E-Z Sprint Seat
$699.99
Product Rating: 5.00 Stars
Butlerbuilt E-Z Sprint Seat
x
            From the first manufacturer to offer full containment seats comes a new option which offers all of the same protection for a fraction of the cost.  The E-Z line features the same quality, rigidity, and safety aspects you need to compete at the highest level.  The head and shoulder supports are covered with CarbonX® material and sized to fit a wide range of driver builds and profiles.  Choose from four sizes, black upholstery only.
  • 10° layback with no assembly required
  • Solid head surround and shoulder support system
  • Black velour rib cover and seat bottom upholstery
  • Four standard sizes: 14.5", 15.5", 16.5", and 17.5"

"Open Wheel, Body" Page 1 of 18

  • 25 Lb. Lead Ballast
    $59.99
    Product Rating: 5.00 Stars
    25 Lb. Lead Ballast
    x
                Lead ballasts allow you to put the weight where you want it. Economical and hard-to-find. Perfect for 305 sprint car racing. 
            
  • Eagle Motorsports MW-NWS-1125MS 3 Hole Adjustable Nose Wing Strap
    Eagle Motorsports MW-NWS-1125MS 3 Hole Adjustable Nose Wing Strap
    x
                
    • Durable 304 stainless steel construction
    • Offset fits any chassis
  • Standard Aluminum Nose Wing Post, Curved
    Standard Aluminum Nose Wing Post, Curved
    x
                

    Support the nose wing on your sprint car with this strong, lightweight aluminum nose wing post.

    • Aluminum construction for light weight and durability
    • For mounting a nose wing on most sprint cars
    • 1" OD
    • 3/4"ID
    • 1/4" hole in post
  • Floor Pan Strap
    $6.99
    Floor Pan Strap
    x
                4130 Chromoly, will fit any chassis.
            
  • Speedway Sprint Car Right Hand Bubble Arm Guard
    Speedway Sprint Car Right Hand Bubble Arm Guard
    x
                
    • Can be trimmed to fit most current sprint cars without a safety cage on the RH side
    • Available in white gel coat finish only
    • Fiberglass construction
    • Universal application, will fit on any chassis
    • Trim-to-fit as necessary
  • Complete Kevlar Wing Line Kit
    $119.99
    Complete Kevlar Wing Line Kit
    x
                Sized for KSE Gen II steering, this kit is everything you need to plumb your wing system from the steering gear to a 10" cylinder.  Includes four AN4 kevlar pressure and return lines as well as two fittings for the gear, four valve fittings, and two cylinder fittings. 
            
  • Aluminum Heel Riser
    $19.99
    Product Rating: 4.67 Stars
    Aluminum Heel Riser
    x
                  These aluminum heel risers have a non-skid top surface and a tapered bottom. 1-1/4" tall. All heliarc welded.   
            
  • Polished Short Nerfs For Raised Rail Sprint Car
    Polished Short Nerfs For Raised Rail Sprint Car
    x
                For LH raised rail Sprint Car Only. Choose plain or polished stainless steel.
            
  • Front Bumper and Nerf Bar Spuds
    Front Bumper and Nerf Bar Spuds
    x
                These front bumper and nerf bar spuds are made from 4130 chromoly. Will fit any chassis.
            
  • Eagle Motorsports In-Rail Sprint Car Hood
    Eagle Motorsports In-Rail Sprint Car Hood
    x
                Eagle Motorsports factory-built component. These fiberglass sprint car hoods from Eagle Motorsports feature a sleek aero-inspired two piece design and they provide adequate clearance for any oil tank, radiator or air box. These hoods fit between the rails.
    • Sleek aero-inspired two piece design
    • Provides adequate clearance for any oil tank, radiator or air box
    • Seals engine compartment from debris
    • Fiberglass construction, gel coat finish
    • Saldana style
    • Choose from black or white finish
    • Works with in-rail nose (940-5605) and cowl (940-5609)
  • Wing Clips
    $4.99
    Wing Clips
    x
                

    Allows quick wing tree adjustments with no wrenches. 

     

    • Durable
    • Lightweight
    • Fast & Easy Adjustments 

     

  • Flat Rock Screens
    $36.99
    Flat Rock Screens
    x
                This rock screen has a main panel that is 25-1/4" x 9-1/4". The tab extends 2-3/16" wide by 2-1/2" long. The Rod diameter in construction is .234 O.D.
            
  • ButlerBuilt BBP-7020 NACA Duct
    ButlerBuilt BBP-7020 NACA Duct
    x
                
    • Air management duct that is great for air direction to pressurize or cool specific areas
    • Paintable black plastic with 3” outlet, 10 1/2" long, 2 3/4" to 6" wide, 4 1/8" deep
    • Computer aided design provides optimum aerodynamic shape for smooth, uninterrrupted air flow
    • Can be installed on body panels to direct cool outside air to brakes, oil coolers, helmet, etc. 
    • Uses 3" hose
  • Hood Saver Protective Clear Hood and Body Tape, 12 Ft. Roll
    Hood Saver Protective Clear Hood and Body Tape, 12 Ft. Roll
    x
                

    Hood Saver is the world's finest transparent protective tape. This multi-purpose, waterproof super clear tape protects painted body parts and chrome from rock chips, tar and bugs. Hood Saver tape is easy to apply and remove. Provides an invisible protective film that is safe for all painted surfaces.

    Comes in a 12 ft long roll that is 5" wide.

  • Seat Belt Installation Kit
    $3.99
    Seat Belt Installation Kit
    x
                

    Don't jeopardize your safety with a hodge-podge of hardware store pieces. This kit is specifically engineered to securely mount your seat belts.   

    Kit includes:

    • (2) 7/16"-20 x 1-1/2" SAE fine thread bolts
    • (2) 7/16"-20 nuts
    • (2) lock washers
    • (2) 2.44" O.D. large flat 11-gauge washers
  • Sprint Car Dash, Aluminum
    $49.99
    Product Rating: 5.00 Stars
    Sprint Car Dash, Aluminum
    x
                

    Standard size fits any chassis or body style. Constructed of .060" aluminum and formed for strength, fit, and function. Brake angle allows easy sight of gauges and the access hole for the throttle stand is already cut out for a no hassle installation.

    It measures 26.5” wide by 27” tall, and will need to be trimmed to fit your application.

  • Sprint Car Aluminum Side Visor
    Sprint Car Aluminum Side Visor
    x
                Eagle Motorsports/Schnee Chassis factory-built components. These aluminum side visors are designed to help cut back on sun light and track light glare during a race.  They feature lightweight and strong aluminum construction to help keep debris out of cockpit as well.
    • Gives slight Aero advantage on some larger tracks
    • Helps cut back on sun light and track light glare
    • Helps keep debris out of cockpit
    • Lightweight and strong aluminum construction
  • Eagle Motorsports Sprint Car Universal RH Armguard
    Eagle Motorsports Sprint Car Universal RH Armguard
    x
                

    Eagle Motorsports factory-built component. This armguard fully encloses the cockpit to protect the driver and works on any sprint chassis.

    • Swindell and Saldana style
    • Fully encloses cockpit
    • Works on any chassis 
    • Fiberglass construction
    • Black or white gel-coat finish
  • Top Wing Tab, Wing Tree / 3/8 Inch Hole
    Top Wing Tab, Wing Tree / 3/8 Inch Hole
    x
                

    Chromoly replacements for your top wing post to get you back on the track! Will work on any Sprint Car Chassis.

    • 3/8 Inch Hole
  • Speedway Standard Chassis Sprint Car Air Box
    Speedway Standard Chassis Sprint Car Air Box
    x
                

    Created from wind tunnel testing, this piece of formed aluminum does more than stop debris. Specifically engineered to maximize intake pressure and radiator air flow with optimized features. Quickly snaps into place in any frame design and fastens with quarter turn fastener buttons or zip ties. Designed specifically to work with Outlaw Clean Air Hood (940-54018). 

  • 3 Piece Side Panel - RH
    $69.99
    3 Piece Side Panel - RH
    x
                Eagle Motorsports/Schnee Chassis factory-component. Access your fuel system with ease using these inter-locking panels. 1/4-fasten together design allows quick entry to the cockpit without fighting the   header.
    • Allows for easy access of the fuel system
    • Interior locking panels
    • Includes holes for spuds
    • Material Thickness: .60"
    • Aluminum, plain finish
    • Fits new Eagle Motorsports/Schnee Chassis cars
  • Body Savers, .433 Inch Hole, 10/Bag
    Body Savers, .433 Inch Hole, 10/Bag
    x
                
    • Extend the life of your fiberglass body parts by eliminating ovaling
    • Mount using 1/8" rivets
    • 430 Stainless steel 
    • .433" diameter
    • Pack of 10
  • Longacre 50888 Air Density Gauge
    Longacre 50888 Air Density Gauge
    x
                

    Get precise carb jetting every race! This gauge from Longacre helps you set air/fuel ratios to compensate for changes in barometric pressure and air temperature. As air density changes with weather conditions, you should rejet your carb to keep to horsepower and sharp response.

    Comes complete with case and jetting chart. 2-1/4" gauge face, 2-7/8" bezel O.D.

    Cannot ship by air.

    Air Density Gauge Installation Instructions

  • Clip-In Conversion Kit
    $19.99
    Product Rating: 4.00 Stars
    Clip-In Conversion Kit
    x
                

    Convert your harness from bolt-in to clip-in with this kit. All heavy duty hardware and snap hook. Two bolts, two washers, two clips.

    • Shank diameter is .434 or 7/16 X 20 threads per inch
    • Shank thread length is approximately 1 5/8"
    • Overall length including the eye is 3 1/8"
    • Washer diameter is 2 1/2" with 7/16" hole
    • Fits 2 inch wide belts

     

  • Eagle Motorsports Tether and Cage Net Tab
    Eagle Motorsports Tether and Cage Net Tab
    x
                

    This tab keeps tethers and cage nets in place. Quality made factory chassis component by Eagle Motorsports, but will work on any chassis brand. They are a weld-on steel tab for your sprint or midget.

    • Keeps tethers and cage nets in place
    • Works for both sprints and midgets
    • Weld-on
    • Steel construction
    • Eagle Motorsports factory chassis component, works on all brands

     

  • Kirkey 99300 Molded Foam Seat Insert Kit
    $254.99
    $279.99
    Kirkey 99300 Molded Foam Seat Insert Kit
    x
                
    • Designed to add form fitting high-density padding to the bottom and lower lumbar of your current seat
    • Includes everything you need in this kit
    • Kit is designed to be used with a seat that fits the driver properly as is
    • If your seat is too large for you already you will need to purchase a second kit
  • Speedway Fender Cover
    $14.99
    $16.99
    Product Rating: 4.83 Stars
    Speedway Fender Cover
    x
                Protect your fenders. Pressure laminated, one piece vinyl construction. Back is a resilient, embossed rubber that is resistant to gasoline, grease and other solvents. Big size 40" x 26".
            
  • Sprint Car Aluminum Front Visor
    Sprint Car Aluminum Front Visor
    x
                Eagle Motorsports/Schnee Chassis factory-built component. These front visors are designed for use as extra cockpit protection and to reduce glare from the sun. They are made of quality plain finished aluminum and will fit any chassis. 
            
  • Scale Pad Storage Box
    $249.99
    Scale Pad Storage Box
    x
                

    These scale pad storage boxes are the strongest around with the ability to hold up to 3000 lbs.  They feature two high-strength latches to secure your scale pads and two handles to make carrying your scale pad box a snap. 

    • Holds up to 3000 lbs.
    • High-strength securing latches
    • Aluminum/steel corners and edges protect during transport
    • FREE with purchase of select scale pad systems (60411500, 300500, 47572593, 300787, 300650, 47572609, 47572601, 300777, and 47572701)
  • Eagle Motorsports In-Rail Sprint Car Cowl
    Eagle Motorsports In-Rail Sprint Car Cowl
    x
                Eagle Motorsports factory-built component. This cowl features a flat design allowing for easy instrument and ignition mounting.  It also allows for clearance for engine installation and removal.
    • Mimics a flat dash in a cowl design
    • Flat surface for instrument and ignition mounting
    • Allows clearance for engine installation/removal
    • Works with In rail hood (940-5602) and nose (940-5605)
  • Economy Rear Nose Wing Strap
    Economy Rear Nose Wing Strap
    x
                

    These economy rear straps are an affordable way to mount your sprint car nose wing. Made from high quality aluminum.

  • Finishline Proban Harness Pads
    $19.99
    $25.00
    Product Rating: 4.00 Stars
    Finishline Proban Harness Pads
    x
                
    • Slide over belts to provide extra comfort in high pressure areas
    • Fire retardant Proban
    • Available in black, blue, or red
  • Simpson 94000 Tyler Child Car Safety Seat
    Simpson 94000 Tyler Child Car Safety Seat
    x
                

    Their first convertible rear and forward racing seat, the Tyler is a seat which converts to protect your child as they grow and is offered in a stylish gray/black color palette with distinctive Simpson branding.

    • Rear facing for infants 4-40 lbs.
    • Forward facing for toddlers 20-65 lbs.
    • SafeSeat Engineering - engineered and crash tested to meet or exceen US Standard FMVS312:
      • Side impacted tested*
      • New car assessment program (NCAP), peak crash force approcimately 2X Car Seat Standard
      • Extreme Car Interior Temperatures
      • * In additioanl to meeting or exceeding all applicable US Safery Standards, the Tyler Seat has been side impact tested for occupant retention by the harness system
    • 5-Point harness with front adjustment helps to keep child secure
    • Dual cup holders keep your essentials handy
    • Comfy infant seat removable for growing child removable toddler headrest helps ensure your growing child's comfort
    • Latch equipped for easy installation
    • Approved for airplane use
  • HRP HRP8067 Radiator Rock Screen
    HRP HRP8067 Radiator Rock Screen
    x
                        Very light and saves your radiators. Aluminum frame includes quarter turn fastener brackets. Weighs less than a pound. 20-1/2" x 12".         
            
  • Wing Slider Kevlar Hose Kit
    $59.99
    Wing Slider Kevlar Hose Kit
    x
                

    New kit supplies you with hoses and fittings to plumb your valve to your cylinder. Kit comes with two hoses, two 90 degree fittings for the wing cylinder, and four fittings for the valve.

    Due to variances in steering gears, you will have to pick out length of hoses you need for your pressure and return lines. Available in either braided or Kevlar. This kit fits most cars (Eagle, J&J, Maxim, etc.) utilizing an 8" or 10" stroke cylinder.

    Kevlar Slider Hose 940-1895

    • (2) 90° flare -4 to 1/8" NPT
    • (4) #4 flare to 1/8" NPT
    • (1) 24" kevlar line
    • (1) 38" kevlar line
  • 2 Piece Lower Motor Panel - RH
    2 Piece Lower Motor Panel - RH
    x
                Eagle Motorsports/Schnee Chassis factory-built component. This lower panel is made from durable aluminum and is intended to   protect engine from debris and damage.  Its two-piece design overlaps for a seamless look and allows for easy access   when you need it. Includes pre-cut holes for spuds. Plain finish. Fits on new Eagle Motorsports/Schnee Chassis. 
            
  • Hood Backing Plate
    $5.99
    Hood Backing Plate
    x
                
    • Use to fit "over the down tube" hoods securely on the car
    • Just reivet on to car, add fastener springs
    • Universal application, works with any style chassis
  • Garage Sale - Carl Edwards Hitch Cover
    Garage Sale
    Garage Sale - Carl Edwards Hitch Cover
    x
                

    Whether you're tailgating at the races or the big game, or simply hanging out at your favorite garage, you'll always have a bottle opener handy with one of these custom hitch covers.

    Designed to fit in standard Class III trailer hitch receivers, these covers are a fun way to pop the top off your favorite bottled beverages.

     

    This is garage sale priced because it has been discontinued. 

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

  • 3 Piece Side Panel - LH, Raised Rail
    3 Piece Side Panel - LH, Raised Rail
    x
                Eagle Motorsports/Schnee Chassis factory-built component. Access your fuel system with ease using these inter-locking panels. 1/4-turn fasten together design allows quick entry to the cockpit without fighting the  header.
    • Allows for easy access of the fuel system
    • Interior locking panels
    • For raised rail cars
    • Material Thickness: .60"
    • Aluminum, plain finish 
    • Fits on new Eagle Motorsports/Schnee Chassis cars
  • Manual Wing Slider
    $49.99
    Manual Wing Slider
    x
                This Manual Wing Slider has a maximum extension range of 18" to 29".
            
Goto Previous PagePrevious Page
1 2 3 4 5 ... 18