Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Filter

Page 1 of 36

Products

Body

Shop Open Wheel Body, Chassis, Seats, Gauges At Speedway Motors

Speedway Motors’ open wheel race car bodies and chassis components are second to none! Speedway has the best chassis, cage kits, seats, and parts for sprint cars and midgets from top names like Auto Meter, Eagle Motorsports and Spike Chassis. With a wide selection of sprint car hoods, racing seats, front or rear bumpers, side panels and safety armguards, it’s one stop shopping for all your Sprint car speed needs. Don't forget about our huge selection of midgets performance parts as well!

Featured Products
  • Standard Aluminum Nose Wing Post, Curved
    Standard Aluminum Nose Wing Post, Curved
    (Part #9401855)
    x
                

    Support the nose wing on your sprint car with this strong, lightweight aluminum nose wing post.

    • Aluminum construction for light weight and durability
    • For mounting a nose wing on most sprint cars
    • 1" OD
    • 3/4"ID
    • 1/4" hole in post
  • Wehrs Machine 1-3/8 Inch Clamp On Hood Pin Mount
    New
    Wehrs Machine 1-3/8 Inch Clamp On Hood Pin Mount
    (Part #91025813)
    x
                

    These Wehrs Machine clamp-on hood pin mounts are for 1-3/8” round tubes and use a 1/2” hood pin.  Choose between 4-1/2" and 6-1/2" heights, measured from the center of the tube to where the pin screws in. Hood pin sold separately.

    • Aluminum construction
    • Anodized finish
    • 1/2"-20 thread pitch
    • RH Female threads 
  • Front Bumper and Nerf Bar Spuds
    Front Bumper and Nerf Bar Spuds
    (Part #91637041)
    x
                These front bumper and nerf bar spuds are made from 4130 chromoly. Will fit any chassis.
            
  • Wehrs Machine WM259NF Gun Drilled Hood Pin w/o Flange, 1/2-20 Thread
    New
    Wehrs Machine WM259NF Gun Drilled Hood Pin w/o Flange, 1/2-20 Thread
    (Part #910452592)
    x
                

    These lightweight aluminum 1/2"-20 fine thread gun drilled hood pin comes without a flange and is 4" tall.

    • 1/2"-20 Thread Pitch
    • 3" Thread Length
    • RH Male Threads
    • No Flange
    • Aluminum Material Type
    • Anodized Finish
    • Sold Individually

     

  • Eagle Motorsports In-Rail Sprint Car Cowl
    New
    Eagle Motorsports In-Rail Sprint Car Cowl
    (Part #9405609)
    x
                Eagle Motorsports factory-built component. This cowl features a flat design allowing for easy instrument and ignition mounting.  It also allows for clearance for engine installation and removal.
    • Mimics a flat dash in a cowl design
    • Flat surface for instrument and ignition mounting
    • Allows clearance for engine installation/removal
    • Works with In rail hood (940-5602) and nose (940-5605)
  • Speedway Fender Cover
    $14.99
    $16.99
    Product Rating: 4.78 Stars
    Speedway Fender Cover
    (Part #91089175)
    x
                Protect your fenders. Pressure laminated, one piece vinyl construction. Back is a resilient, embossed rubber that is resistant to gasoline, grease and other solvents. Big size 40" x 26".
            
  • Aluminum Heel Riser
    $19.99
    Product Rating: 4.67 Stars
    Aluminum Heel Riser
    (Part #91055108)
    x
                  These aluminum heel risers have a non-skid top surface and a tapered bottom. 1-1/4" tall. All heliarc welded.   
            
  • All-In-One Accessory Clamps
    $14.99
    All-In-One Accessory Clamps
    (Part #91032866)
    x
                

    These billet aluminum clamps are great for mounting and adjusting hood pins. The accessory bracket and 3.5" hose clamps can be added for holding power steering and radiator reservoir tanks.

    Available for 1”, 1.25”, 1.375”, or 1.50” tube sizes. Clamp is drilled and tapped ½” – 20 in the center, and 10-32 on the outsides.

    Hood pins and brackets sold separately.

Filter

"Open Wheel, Body" Page 1 of 36

Page 1 of 36

  • EMPI 62-2310 High Back Bucket Seat Cover, Black w/Square Pattern, Each
    EMPI 62-2310 High Back Bucket Seat Cover, Black w/Square Pattern, Each
    (Part #1412310)
    x
                

    Add these thickly padded high grade vinyl seat covers for that one-off custom look and added comfort to your Poly High Back bucket seat (141-2300).  EMPI's seat covers are available in Black and come with snap fasteners secure and install easily. These covers also come with two harness slots, making them usable on many other manufacturers' poly seats.

    • Thick padded high grade vinyl construction
    • Designed for use with EMPI's Poly High Back seat (141-2300)
    • Black with square pattern
    • Snap fasteners
    • Dual harness slots
  • Stainless Steel Battle Bars, Left Side, Standard Rail
    Stainless Steel Battle Bars, Left Side, Standard Rail
    (Part #91073081)
    x
                

    Stainless steel battle bars will fit any sprint car chassis, and great for short track, wheel banging action.

  • Eagle Micro Nose, Raised Center
    Eagle Micro Nose, Raised Center
    (Part #9601519)
    x
                
            
  • Auto Meter 201009 Cobra Air-Core Voltmeter Gauge, 2-1/16 Inch
    Auto Meter 201009 Cobra Air-Core Voltmeter Gauge, 2-1/16 Inch
    (Part #182201009)
    x
                

    This vintage instrument series is designed to accurately re-create the period correct details of the instruments used in the original Cobra Roadster while incorporating the latest technology advancements in performance gauges from Auto Meter. These black dial face instruments feature incandescent through the dial backlighting with white pointers, traditional numbers and tick marks, and are finished with flat glass and scalloped chrome bezels.

    • Short Sweep Electric Voltmeter
    • 8-18 V
    • Mounts in 2-1/16" Hole
    • Includes mounting hardware and Incandescent Backlighting
    • Requires 18 gauge electrical wire and ring or spade terminal connections for installation (not included)
  • Henchcraft Mini Lightning Sprint Floor Pan Bolt Kit
    Henchcraft Mini Lightning Sprint Floor Pan Bolt Kit
    (Part #9708332)
    x
                

    Attach the floor pan to your Henchcraft Mini Lightning Sprint chassis with this clean bolt kit. They come complete for a quick and easy installation.

    • Mounts floor pan to Henchcraft chassis

    Includes:

    • (11) 10-32 x 1/2" bolts
    • (11) Nylock nuts
  • Basket Rear Bumper
    $94.99
    Basket Rear Bumper
    (Part #91073078)
    x
                

    Unpolished stainless steel rear "basket" bumper for sprints. Made from 1.00" O.D. tubing.

  • EMPI 62-2408 Poly Low Back Bucket Seat Cover, Black w/Square Pattern
    EMPI 62-2408 Poly Low Back Bucket Seat Cover, Black w/Square Pattern
    (Part #1412408)
    x
                

    Add these thickly padded high grade vinyl seat covers for that one-off custom look and added comfort to your Poly Low Back bucket seat (141-2400).  EMPI's seat covers are available in Black and come with snap fasteners secure and install easily. These covers also come with two harness slots, making them usable on many other manufacturers' poly seats.

    • Thick padded high grade vinyl construction
    • Designed for use with EMPI's Poly Low Back seat (141-2400)
    • Black with square pattern
    • Snap fasteners
    • Dual harness slots
  • Simpson 2 Inch Dual Anti-Sub Belt, Latch and Link
    Simpson 2 Inch Dual Anti-Sub Belt, Latch and Link
    (Part #63031014)
    x
                Dual anti-submarine strap measures 27" per side. Latch & Link, semi-adjustable. Offered in red, blue, or black. Designed for bolt-in installation.

  • Stallard Micro/Mini Sprint Engine Nerf Bar
    Stallard Micro/Mini Sprint Engine Nerf Bar
    (Part #9601114)
    x
                

    These polished stainless nerf bars are designed to fit Eagle and Stallard style chassis.  They work to protect the engine of your Micro/Mini/600 sprint.

    • 3/4" diameter polished stainless
    • 9" length
    • 9.25" width, center to center
  • Outlaw Wings Jr. Sprint 18 x 24 Nose Wing
    Outlaw Wings Jr. Sprint 18 x 24 Nose Wing
    (Part #96077111)
    x
                

    This nose wing from Outlaw Wings has a 24" wide by 18" long center section with side boards that are 8" wide by 20" long.  

    Outlaw Front Nose Wing

    • 18" x 24"
    • For junior sprints
    • Recessed rivets
    • Aluminum
  • Carbon Fiber Leading Edge Protector, Top and Nose
    Carbon Fiber Leading Edge Protector, Top and Nose
    (Part #91077400)
    x
                

    Protect the front of your top and nose wings with these carbon fiber caps. They’re durable, easy to install with pop rivets, and maintain proper aerodynamics.

    • Used on sprint cars where you need to keep the leading edge of your wing clean 
    • Made of strong carbon fiber
    • Attach easily with a few rivets or even silicone
    • 60" x 6" top wing
    • 36" x 3-1/2" nose wing
  • Spike Chassis 353010 Midget Stainless Steel Front Bumper
    Spike Chassis 353010 Midget Stainless Steel Front Bumper
    (Part #9503010)
    x
                This Spike Chassis Midget  Bumper is fixture fabricated from 7/8" OD Stainless Steel. Fits Spike, Stealth and other popular Midgets.
            
  • 25 Lb. Lead Ballast
    $79.99
    Product Rating: 5.00 Stars
    25 Lb. Lead Ballast
    (Part #91045002)
    x
                Lead ballasts allow you to put the weight where you want it. Economical and hard-to-find. Perfect for 305 sprint car racing. 
            
  • KSE Sprint Wing Valve Tab
    $6.99
    KSE Sprint Wing Valve Tab
    (Part #91637100)
    x
                

    These tabs work with all slider valves. They are a weld-on steel bracket for your Sprint or Midget race car.

    • Weld-On
    • Works with all wing slider valves
    • Steel construction
    • KSE style factory chassis component
  • Simpson 51201 Latch n Link Safety Belt w/Steel Adjusters, RH Ratchet
    Simpson 51201 Latch n Link Safety Belt w/Steel Adjusters, RH Ratchet
    (Part #63051201)
    x
                

    These ratchet belts are available in right side, with steel adjusters.  Simpson's 5-point Sprint car latch and link ratchet restraint systems are SFI 16.1 certified and as always, made in the U.S.A.!

    • SFI 16.1 Certified
    • 5-Point Latch & Link
    • 2" over shoulders belt width
    • Steel Adjusters
    • Platinum Series
    • Fixed Left Side
    • Right Side Ratchet

    Speedy Tip:  Seat belts lose around 50% of their strength over a two year period due to the dirt, washing, and sunshine.  As a rule, seat belts should be replaced every two years.  Belts that have been through an accident should also be replaced due to the forces exerted on them.

  • Heel Floor Board Riser, 1-1/8 Inch
    Heel Floor Board Riser, 1-1/8 Inch
    (Part #91055001)
    x
                These heel floor board risers offer an unique design with heel ramp. Raises heel 1-1/8". Lightweight. Pop rivet in.
            
  • Simpson Bolt-In Lap Belts, Cam Lock, Pull-Down
    Simpson Bolt-In Lap Belts, Cam Lock, Pull-Down
    (Part #63032024)
    x
                Simpson bolt-in style lap belts wtih cam lock fastener. Available in red, blue, or black.
            
  • Speedway 14 Sq. Ft. Micro/Mini Sprint Top Wing Kit
    Speedway 14 Sq. Ft. Micro/Mini Sprint Top Wing Kit
    (Part #96077100)
    x
                

    Top off your Micro or Mini Sprint car with a top-quality, money-saving Micro / Mini Sprint Top Wing Kit from Speedway Motors.

    Speedway’s new Micro / Mini Sprint Top Wing Kit is built from premium-quality aircraft aluminum to provide the strength and light weight demanded by top racers. The wing kit is easily assembled using countersunk rivets and features 54-inch offset sideboards and internal sliders. A quick-change wicker bill ensures easy adjustability between events; different wicker bill sizes are available separately. The Micro / Mini Sprint Top Wing Kit is economically priced under $400 and ships via standard UPS ground freight, saving you both time and money.

    Speedway 14 Sq. Ft. Micro/Mini Sprint Top Wing Kit

    • Premium aircraft aluminum
    • 54" offset sideboards
    • Countersunk rivets
    • Internal sliders
    • Quick change wicker bill
  • Stainless Nose Wing Strap
    $11.99
    Stainless Nose Wing Strap
    (Part #9401877)
    x
                
    • Durable 304 stainless steel construction
    • Offset fits any chassis
    • Three height adjustments – 8.25", 8.75", 9.25"
  • Stallard Micro/Mini Sprint Fiberglass In-Rail Chassis Hood
    Stallard Micro/Mini Sprint Fiberglass In-Rail Chassis Hood
    (Part #96565011)
    x
                
    These fiberglass racing hoods are specifically designed for use with 2014 Stallard in-rail chassis and come available in black or white gel-coat finish.
    • Micro/Mini Sprint racing cowl
    • Available in black or white gel-coat finish
    • Quality fiberglass construction
    • For use with Stallard in-rail chassis cars
Goto Previous PagePrevious Page
1 2 3 4 5 ... 36