Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Open Wheel Air & Fuel Delivery At Speedway Motors

Speedway Motors stocks all the parts and pieces you need to put together a winning fuel delivery system in your sprint or midget. Plus, we have a great selection of bladders and tanks, as well as electric and mechanical fuel pumps. Don't forget to let your engine breath with filters from K&N, R2C and Kinser. Speedway can fuel your need for speed!

Featured Products
Speedway Red Electric Fuel Pump
Speedway Red Electric Fuel Pump
SKU-91012801
x
            

Speedway Electric fuel pump is a standard pressure street pump for gasoline only. It has a maximum pressure preset of 7 psi and a free flow capacity of 97 gph. It flows 67 gph while maintaining 5 psi. No regulator required. 

  • Internally regulated at 7 psi
  • Gravity fed fuel "pusher" design
  • Mount below lowest point of fuel tank
  • 3-1/2" from mounting bracket surface to the very front of the pump
  • Fittings with pump are for 3/8" hose
Holley 12-801-1 97 GPH Red Electric Fuel Pump
Holley 12-801-1 97 GPH Red Electric Fuel Pump
SKU-42512801
x
            

Holley's Red Electric fuel pump is a standard pressure street pump for gas only.  It has a pressure preset of 7 psi and a free flow capacity of 97 gph. It flows 67 gph while maintaining 5 psi. No regulator required. Has a 3/8" NPT inlet and outlet.

  • Tumble polished billet look
  • Improved design for street/strip applications
  • Distinctive "Red" logo
  • Flows 97 GPH (free flow)
  • Flows 71 GPH at 4 PSI
  • Regulator is not required
  • Motor draws only 2 amps current
  • 7-1/2 Amp fuse recommended
  • Provides constant fuel flow with no pulsation
  • Has externally accessible pressure relief valve (max 7 PSI)
  • Rotor/Vane pump design is more tolerant of contaminated fuels
  • New lower housing casting for enhanced fuel flow and quieter operation
  • Weighs only 2.88 lbs.
  • Includes mounting bracket
  • Repair kits are readily available
  • NOT compatible with alcohol or methanol fuels
  • Use of safety shut-off switch strongly recommended
  • Not designed or recommended for use with fuel injection systems
  • 3/8 NPT inlet/outlet

425-12801 Instruction Sheet (PDF)

Fuel Pump Tech Info (PDF) 

Speedway Electric Fuel Pump, Blue
Speedway Electric Fuel Pump, Blue
SKU-91012802
x
            Speedway's Blue electric fuel pump with regulator is a max-pressure performance pump for gas applications only.  The pressure is preset at 14 psi and the free capacity is 110 gph.  It flows 70 gph while maintaining 9 psi.  Regulator 91012803 is supplied.  
        
Fuel Safe SB228DT 28 Gallon Sprint Car Tank Kit, -12 AN Top w/ Baffle
Fuel Safe SB228DT 28 Gallon Sprint Car Tank Kit, -12 AN Top w/ Baffle
SKU-94063410
x
            Fuel Safe has long been the leader in Sprint Car tanks and bladders.  All bladders meet stringent safety requirements and are serial numbered.  Speedway now offers tank kits with or without the anti-surge baffle and the new popular collector options.  All tanks have molded in mounts for all current Sprint Cars.  Tank kits comes complete with pickup and upper plate with cap and vent.  For use with alcohol fuel only.
        

"Open Wheel, Air and Fuel Delivery" Page 1 of 17

  • AFCO 10171 Bushing Kit w/ RH Threaded Female Rod End
    AFCO 10171 Bushing Kit w/ RH Threaded Female Rod End
    SKU-10610171
    x
                AFCO Throttle Rod Components
            
  • MPD Racing 94-73800 BLACK Fuel Shut Off Valve for Fuel Filter, -12 AN
    MPD Racing 94-73800 BLACK Fuel Shut Off Valve for Fuel Filter, -12 AN
    SKU-546738
    x
                Replacement fuel shut off valve for Speedway aluminum fuel filters. Has a -12 AN outlet with O-ring. Teflon sealed ball valve inside.
            
  • M&W BC-1B Aluminum Sprint Car Bell Crank, Black
    M&W BC-1B Aluminum Sprint Car Bell Crank, Black
    SKU-910553001
    x
                These Sprint racing bell cranks come complete with a sealed bearing for  smooth action.  Multiple adjustment holes give you the ability to make it the part that works.  Anodized 6061 T6 Aluminum.
    • CNC-machined
    • Anodized black aluminum
    • Measures 2-7/16" and 3-9/16" from the center of the bearing to the end of the arms
    • Has .246" I.D. bearing
    • Bearing O.D. is .630"
    • Overall Length: 4.37"
    • Overall Thickness: .17"
    • Hole Diameter: .19"
  • Kinsler Fuel Injection 3904 High Speed Diaphragm Bypass
    Kinsler Fuel Injection 3904 High Speed Diaphragm Bypass
    SKU-4733114
    x
                

    This Kinser diaphragm bypass is used for secondary or high speed bypass on long tracks. Has a restrictor jet provision, neoprene diaphragm for gasoline or methanol, and a hard-anodized aluminum housing. Simple adjustable pop-off pressure using a balde screwdriver and 7/16" wrench.

    Includes -6 AN male flare fittings.

  • Kinsler Flowed Injector Pills
    Kinsler Flowed Injector Pills
    SKU-4733715
    x
                Kinsler sizes .050-.110. Kinsler pills are offered in great variety for more precise fuel flow control in your fuel injection system.

    Pill size is listed at the end of a part number: 4733715-050 means pill size 050.

  • SBI SB 128FF-T Sprint Fuel Forward Tank Bladder Only, 28 Gallon
    SBI SB 128FF-T Sprint Fuel Forward Tank Bladder Only, 28 Gallon
    SKU-94053608
    x
                

    Designed for short tracks, the SBI Fuel Forward baffle system helps keep your fuel load forward in the tank as the fuel level decreases. The anti-slosh and fuel containment characteristics make your car handle more consistently as you burn fuel. This special baffle concept lets you pick up almost every drop of fuel.

    • For use with alcohol fuel only
    • Two year manufacturer warranty

    Bladder Maitenance (PDF)

  • Waterman 935566D Dash Mount Fuel Shut Off Valve, -6 AN
    Waterman 935566D Dash Mount Fuel Shut Off Valve, -6 AN
    SKU-9109355661
    x
                Dash mount is AN6 male with offset style handle. Fuel cell ball valve   mounts in plate. Required for many  Sprint cars. They are designed to be  plumbed inline and mount close to the driver.
    • Engineered specifically for sprint car applications
    • -6 AN male to male fuel shut off valve
    • Designed to be plumbed inline and mount close to the driver
  • LRB Three AN6 Port Fuel Manifold
    LRB Three AN6 Port Fuel Manifold
    SKU-94011595
    x
                This fuel manifold can be clamped to a 1 3/8'' frame rail or upright. This allows easy plumbing of high-speeds and returns. Has either three or four AN 6 ports and one AN 8.
            
  • Kinsler Fuel Injection 3328 Bypass Valve Spring, 7 Lb.
    Kinsler Fuel Injection 3328 Bypass Valve Spring, 7 Lb.
    SKU-4733328
    x
                Dial in your bypass valve with these standard bypass springs for use with alcohol carburetors. Spring has a .028" wire diameter.
            
  • Mikise Power Pic Filter Cleaner Spout
    Mikise Power Pic Filter Cleaner Spout
    SKU-910606420
    x
                

    New economy air filter cleaner to clean your air filter from the inside out.  Hooks to a standard garden hose to direct multiple high pressure sprays streams where needed.

    • Clean your air filter from the inside out
    • Hooks to a standard garden hose
  • Henchcraft Chassis Mini Lightning Sprint 47 Inch Throttle Cable
    Henchcraft Chassis Mini Lightning Sprint 47 Inch Throttle Cable
    SKU-9707100
    x
                

    New from Henchcraft Chassis, these throttle cables are designed for use with Mini Lightning Sprint chassis and feature easy adjust ends for quick setting.

    • 47" long cable
    • Custom cable mates o most throttle bodies
    • Easy adjust ends for quick setting
    • For use on Henchcraft Mini Lightning Sprint chassis
  • Hilborn 710A312ASZ #16 Injector Nozzles, #16 Up, 3-1/2 Inch Tip, Set/8
    Hilborn 710A312ASZ #16 Injector Nozzles, #16 Up, 3-1/2 Inch Tip, Set/8
    SKU-385710A312ASZ
    x
                

    Each Hilborn nozzle has 1/2"-20 straight threads. Sold in sets of eight.

  • Brake Line Quick Disconnects Steel-Female Half
    Brake Line Quick Disconnects Steel-Female Half
    SKU-9401117
    x
                

    These quick disconnects were designed to be used with brake fluid; most others will leak after use. Choose aluminum or steel. 

    AN 3 ends.  

  • Fuelab 52501-1 EFI Fuel Pressure Regulator, 25-90 PSI
    Fuelab 52501-1 EFI Fuel Pressure Regulator, 25-90 PSI
    SKU-96052501
    x
                

    Gasoline, methanol, ethanol, and dieselfuel compatible for fuel injected applications. Accepts port style and non-port style union fittings without interference. Also features two 1/8” NPT gauge ports for an external pressure gauge and pressure reference. Fine thread pitch on adjustment screw for precise pressure adjustment.

    • Includes stainless steel mounting bracket
    • One -6AN inlet and one -6AN return port in-line
  • Black 6 Inch Aluminum High Flow Fuel Filter, Stainless Element
    Black 6 Inch Aluminum High Flow Fuel Filter, Stainless Element
    SKU-91011733
    x
                

    Compact design offers weight savings over full size filter. Comes with stainless steel high-flow element. Can be cleaned and reused. Black anodized aluminum housing. Will handle fuel injection. NOT compatible with ethanol (E85)or high pressure diesel.

    Available with AN6, AN8, AN10 or AN12 inlet/outlet.

  • AFCO 10176-24 Throttle Rod, 24 Inch Long
    AFCO 10176-24 Throttle Rod, 24 Inch Long
    SKU-1061017624
    x
                
    • 1/4" plated steel rod
    • 1/4" male right hand threads on both ends
    Note: Extra-long thread allows more adjustment
  • K&N Filters 99-0533 Air Filter Oil, Squeeze Bottle
    K&N Filters 99-0533 Air Filter Oil, Squeeze Bottle
    SKU-465990533
    x
                

    K&N Air Filter Oil is the only oil specially formulated to work in combination with the cotton fabric in K&N Filtercharger elements providing a superior air filtration system. When used as directed, it quickly penetrates the filter pleats, where it remains suspended in the cotton fabric. Saturation is maintained until the element is cleaned with K&N Air Filter Cleaner.

    8 Oz. squeeze bottle.


  • FCR Carburetor Adapters
    $199.99
    $249.99
    FCR Carburetor Adapters
    SKU-96011824
    x
                Outfit your FCR carbs with these flowed billet adapters to increase air flow.  These adapters also allow the billet air box 960-12863 to fit right on!  Four to a set.
            
  • Fuel Safe ST333 Outlaw Sprint Replacement Fuel Shell, 33 Gallon
    Fuel Safe ST333 Outlaw Sprint Replacement Fuel Shell, 33 Gallon
    SKU-91053426
    x
                Fuel Safe has long been the leader in Sprint Car tanks and bladders.  All bladders meet stringent safety requirements and are serial numbered.  Speedway now offers tank kits with or without the anti-surge baffle and the new popular collector options.  All tanks have molded in mounts for all current Sprint Cars.  Tank kits comes complete with pickup and upper plate with cap and vent.  For use with alcohol fuel only.
            
  • Speedway Purple Aluminum Fuel Filter w/ Return Ports, Paper, 10 Inch
    Speedway Purple Aluminum Fuel Filter w/ Return Ports, Paper, 10 Inch
    SKU-91011742
    x
                

    This filter is designed for fuel systems which require a higher flow rate. The 3/8" NPT return ports allow fuel to circulate back to the pump. Paper elements are for use with gasoline fuel only. NOT compatible with ethanol fuel (E10, E85).

    Filter has a 10" length with multiple AN fitting sizes available including -6 AN, -8 AN, -10 AN, and -12 AN.  

  • Injector Stack Wash Plugs, 2.555 - 2.690 Inch, Set/10
    Injector Stack Wash Plugs, 2.555 - 2.690 Inch, Set/10
    SKU-9402744
    x
                
    • Tapered plugs for fuel injector stacks
    • Made from high impact plastic
    • Set of 10
  • K&N 4 Inch Single Type Injector Stack Air Filters, 2-1/2 Inch, Set/8
    K&N 4 Inch Single Type Injector Stack Air Filters, 2-1/2 Inch, Set/8
    SKU-465RD0708
    x
                For use with cut velocity stacks, or straight pieces of exhaust tubing. Flat rubber bases with molded-in velocity stack type radius and step for smooth bore down from element to tube. 

    Filters measure 3-1/2" diameter and 4" tall.

  • Fuel Injection Wash Plugs, 2-3/16 Inch, Set/8
    Fuel Injection Wash Plugs, 2-3/16 Inch, Set/8
    SKU-9402714
    x
                Has an O-ring for a tight seal against dirt and water. Each plug is designed to hold a spark plug and an injection nozzle. Comes in a set of eight.
            
  • Micro/Mini 13 Inch Dry Media Air Box Kit
    Micro/Mini 13 Inch Dry Media Air Box Kit
    SKU-96012864
    x
                

    Bolt on power!  Utilized by top engine builders, this CNC machined air box kit features a top and base plate which house a single oval R2C dry media filter for increased performance, filtration, and ease of maintenance.  The complete system weighs only 3.9 lbs. and works with carbs or injection with a mating diameter of 2.435" and boot centerline distance of 2.85".

    R2C Additional Information (PDF)

  • Waterman 200040S Micro-Bertha Steel Sprint Fuel Pump, .400
    Waterman 200040S Micro-Bertha Steel Sprint Fuel Pump, .400
    SKU-91011554
    x
                Waterman's latest design Ultralight 2000 Sprint fuel pump incorporates a non-corrosive gear housing to maintain critical tolerances and control heat transfer.  Pump includes a -12 AN inlet and is ready for a three or four way manifold with -6 AN outlets.
            
  • King Racing Products 1995 Flush Mount Down Nozzle Filter
    King Racing Products 1995 Flush Mount Down Nozzle Filter
    SKU-9401995
    x
                

    King Racing Products solved a problem for many drivers. Have you every had a nozzle filter break or come off due to debris. Now you dont have to worry with Kings flush nozzle filters. 

     

    • 1/8" NPT thread adapts to any nozzle filter biscuit.

     

     

     

  • K&N Dual Injector Filters, 2-3/8 Inch, Set/4
    K&N Dual Injector Filters, 2-3/8 Inch, Set/4
    SKU-465RD5004
    x
                

    These K&N straight injection filters are for fuel injection applications like Kinsler "straight" 3-piece, Pontiac and Chevrolet small block V8. Top plate measures 9" x 5-1/2", total height of filter 6-3/4".

  • RCI 126 Replacement Flapper Valve, 16 Bolt
    RCI 126 Replacement Flapper Valve, 16 Bolt
    SKU-6007033
    x
                

    This fuel tank cap seal flapper is designed to retrofit all RCI Circle Track cells with the 16 bolt oval type 4" cap assemblies.

    This flapper is designed to slow the fuel leakage in the event of a vehicle roll over.

    A must have safety item! 

    • Replacement nylon flapper valve for all "16 bolt top" RCI fuel cells
    • Compatible with gas or alcohol
    • Overall Length: 4-3/8"
    • Overall Width: 3-3/4"
    • Overall Thickness: .03"
    • Clear plastic material

    Note: Per vendor, this flapper valve should be replaced on a yearly basis.

  • Hilborn Fuel Injection PG150C 1/2 Fuel Pump, 2.2 GPM
    Hilborn Fuel Injection PG150C 1/2 Fuel Pump, 2.2 GPM
    SKU-385PG150C05
    x
                

    The Hilborn direct drive fuel pump has a new billet style rotatable mount. Direct drive and flow-tested. Gives long-lasting, rugged dependability. Convenient quick disconnect. For use with injection or alky carbs. Features hard annodized, aluminum construction. The clamp base model offers you the convenience of a quick disconnect. This pump can be rotated for easy access to fittings.

    All pumps rated at 1800rpm with 50psi. Has one -10 AN inlet and two -6 AN outlets.

  • Lokar 1010118 Throttle Cable/Spring Return Bracket Kit, 4 Hole, Black
    New
    Lokar 1010118 Throttle Cable/Spring Return Bracket Kit, 4 Hole, Black
    SKU-4911010118
    x
                

    This black throttle bracket from Lokar is designed for Morse cables and or single cylinder throttle stops. Its design eliminates top mount flopping and can function without throttle stops.

    • Scoop tray studs and stainless hardware included
    • Return Springs with dual wound ends for safety
    • Eliminates single hook ends opening up
    • Creates less strain on throttle cable
    • For 4500 Series Carburetors
    • Made In The U.S.A.
  • EMPI 17-2761 Billet Aluminum Gas Cap for Stainless Steel Tanks, Each
    EMPI 17-2761 Billet Aluminum Gas Cap for Stainless Steel Tanks, Each
    SKU-1412761
    x
                

    These fuel tank caps are designed for use with EMPI's stainless gas tanks but will work great with nearly any style filler neck.  They feature billet aluminum construction and add a perfect shine to top off your fuel tank.

    • For EMPI stainless steel fuel tanks
    • Rigid edge design for a sure grip
    • Billet aluminum
    • Sold each
  • MPD Racing 94-73850 BLK Fuel Shut Off Valve for Fuel Filter, -10 AN
    MPD Racing 94-73850 BLK Fuel Shut Off Valve for Fuel Filter, -10 AN
    SKU-546739
    x
                Replacement fuel shut off valve for Speedway aluminum fuel filters. Has a -10 AN outlet with O-ring. Teflon sealed ball valve inside.
            
  • Kinsler 12087 High Pressure IRL Inner Valve Spring, K-140
    Kinsler 12087 High Pressure IRL Inner Valve Spring, K-140
    SKU-47312087
    x
                

    These high pressure valve springs for Kinsler IRL bypass allow you to change for medium pressure to high pressure.

    • 17-37 psi
    • "Inner" spring
    • For K-140 valve
  • Fuelab 81824-1 In-Line Fuel Filter
    Fuelab 81824-1 In-Line Fuel Filter
    SKU-94081824
    x
                

    Fuelab In-Line Fuel Filters keep your engine running clean. They feature male AN / 37º Flared fitting end caps, so you can attach them directly to other fuel system components*. Also featured are machined internal radii for minimal pressure drop. The compact 818 Series Fuel Filter includes a 3 inch element. *With AN female ports. O-ring required.

    • Compact design supports 200 GPH
    • Gasoline, diesel, methanol, and ethanol fuel compatible
    • Billet Aluminum with anodize per military MIL-A-8625, Type II
    • -12AN male inlets and outlets
    • Includes low profile saddle clamp mounting bracket
    • Replaceable or cleanable filter element
    • 200 PSIG maximum pressure rating
    • Backed by a 2-year limited warranty

     

  • Hilborn 327C8NA Race Saver Mega Power Small Block Chevy Fuel Injector
    Hilborn 327C8NA Race Saver Mega Power Small Block Chevy Fuel Injector
    SKU-385305
    x
                Please view the product's page for more information
            
  • Outerwear for K&N Midget Filter
    Outerwear for K&N Midget Filter
    SKU-5641217
    x
                

    Outerwears pre-filters help protect your expensive filter from water, dirt, and rocks without restricting airflow. Fits our K&N Midget filters 465-1008570 and 465-1008576.

    Choose black, red, yellow, blue, orange, or purple.

  • Intake Tube Clamp for Honda Intake
    Intake Tube Clamp for Honda Intake
    SKU-96012851
    x
                Intake Clamp for Honda Intake
            
  • Kinsler Flowed Injector Nozzles, 5-1/2 Inch Length, Set of 8
    Kinsler Flowed Injector Nozzles, 5-1/2 Inch Length, Set of 8
    SKU-47326
    x
                Kinsler constant flow mechanical fuel injector nozzles are guaranteed to flow within 2% of each other. Nozzles have a fixed orfice that is sized for the specific engine and fuel being used.

    All have 1/2"-20 thread. Complete set of 8.

  • Holley 37-1536 Performance Carburetor Renew Rebuild Kit
    Holley 37-1536 Performance Carburetor Renew Rebuild Kit
    SKU-427371536
    x
                

    Each Holley Renew Kit carburetor rebuild kit contains all parts and gaskets that are necessary to restore “like new” performance to your four barrel carburetor. Detailed instructions are also included to guide you through the rebuilding process. Start off the season with a quality Holley Renew Kit repair kit. It's your guarantee for trouble–free cruising.

    • Serves all Holley Performance Carburetors
    • Genuine Holley quality parts
    • Extra parts for performance tuning
    • Step-by-step instructions
    • Detailed tuning guide
    • Packaging also parts tray
    • Includes:
      • Gaskets
      • O-Rings
      • Pump Diaphragm
      • Needle & Seat
      • Power Valve 
      • Step-By-Step Instructions
      • Detailed Tuning Guide

    427371536 Carb Rebuild Manual (PDF)

    427371536 Carb Exploded View (PDF) 

    427371536 Carb Kit Specifications (PDF) 

    427371536 Carb Addendum (PDF) 

  • Waterman 350812 Fuel Pump Adapter Fitting, -8 AN Port to -12 AN
    Waterman 350812 Fuel Pump Adapter Fitting, -8 AN Port to -12 AN
    SKU-94011850
    x
                Fittings  are an integral part of any  racing fuel system. Simplicity within a  fuel system is the idea behind  WRC's "Sure Seal" fittings. These  fittings are reverse flared  for maximum fuel flow and the hose end is  O-ringed for a "Sure Seal!" Eliminate the chance for leakage with the  use of these aluminum fittings.
            
Goto Previous PagePrevious Page
1 2 3 4 5 ... 17