Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Open Wheel Air & Fuel Delivery At Speedway Motors

Speedway Motors stocks all the parts and pieces you need to put together a winning fuel delivery system in your sprint or midget. Plus, we have a great selection of bladders and tanks, as well as electric and mechanical fuel pumps. Don't forget to let your engine breath with filters from K&N, R2C and Kinser. Speedway can fuel your need for speed!

Featured Products
Holley 12-801-1 97 GPH Red Electric Fuel Pump
Holley 12-801-1 97 GPH Red Electric Fuel Pump
x
            

Holley's Red Electric fuel pump is a standard pressure street pump for gas only.  It has a pressure preset of 7 psi and a free flow capacity of 97 gph. It flows 67 gph while maintaining 5 psi. No regulator required. Has a 3/8" NPT inlet and outlet.

  • Tumble polished billet look
  • Improved design for street/strip applications
  • Distinctive "Red" logo
  • Flows 97 GPH (free flow)
  • Flows 71 GPH at 4 PSI
  • Regulator is not required
  • Motor draws only 2 amps current
  • 7-1/2 Amp fuse recommended
  • Provides constant fuel flow with no pulsation
  • Has externally accessible pressure relief valve (max 7 PSI)
  • Rotor/Vane pump design is more tolerant of contaminated fuels
  • New lower housing casting for enhanced fuel flow and quieter operation
  • Weighs only 2.88 lbs.
  • Includes mounting bracket
  • Repair kits are readily available
  • NOT compatible with alcohol or methanol fuels
  • Use of safety shut-off switch strongly recommended
  • Not designed or recommended for use with fuel injection systems
  • 3/8 NPT inlet/outlet

425-12801 Instruction Sheet (PDF)

Fuel Pump Tech Info (PDF) 

Speedway Red Electric Fuel Pump
Speedway Red Electric Fuel Pump
x
            

Speedway Electric fuel pump is a standard pressure street pump for gasoline only. It has a maximum pressure preset of 7 psi and a free flow capacity of 97 gph. It flows 67 gph while maintaining 5 psi. No regulator required. 

  • Internally regulated at 7 psi
  • Gravity fed fuel "pusher" design
  • Mount below lowest point of fuel tank
  • 3-1/2" from mounting bracket surface to the very front of the pump
  • Fittings with pump are for 3/8" hose
Speedway Electric Fuel Pump, Blue
Speedway Electric Fuel Pump, Blue
x
            Speedway's Blue electric fuel pump with regulator is a max-pressure performance pump for gas applications only.  The pressure is preset at 14 psi and the free capacity is 110 gph.  It flows 70 gph while maintaining 9 psi.  Regulator 91012803 is supplied.  
        
Fuel Safe SB228DT 28 Gallon Sprint Car Tank Kit, -12 AN Top w/ Baffle
Fuel Safe SB228DT 28 Gallon Sprint Car Tank Kit, -12 AN Top w/ Baffle
x
            Fuel Safe has long been the leader in Sprint Car tanks and bladders.  All bladders meet stringent safety requirements and are serial numbered.  Speedway now offers tank kits with or without the anti-surge baffle and the new popular collector options.  All tanks have molded in mounts for all current Sprint Cars.  Tank kits comes complete with pickup and upper plate with cap and vent.  For use with alcohol fuel only.
        

"Open Wheel, Air and Fuel Delivery" Page 1 of 20

  • RCI 126 Replacement Flapper Valve, 16 Bolt
    RCI 126 Replacement Flapper Valve, 16 Bolt
    x
                

    This fuel tank cap seal flapper is designed to retrofit all RCI Circle Track cells with the 16 bolt oval type 4" cap assemblies.

    This flapper is designed to slow the fuel leakage in the event of a vehicle roll over.

    A must have safety item! 

    • Replacement nylon flapper valve for all "16 bolt top" RCI fuel cells
    • Compatible with gas or alcohol
    • Overall Length: 4-3/8"
    • Overall Width: 3-3/4"
    • Overall Thickness: .03"
    • Clear plastic material

    Note: Per vendor, this flapper valve should be replaced on a yearly basis.

  • Fuel Filter Mounting Bracket
    Fuel Filter Mounting Bracket
    x
                

    These fuel filter mounting brackets are CNC machined aluminum. Available in 1-3/8", 1-1/2", or 1-3/4" round tubing.

    These brackets are designed to be used with our filters. Hole is 2" inner diameter. 

  • Fuel Safe SB225DT 25 Gallon Sprint Car Tank Kit, 12 AN Top with Baffle
    Fuel Safe SB225DT 25 Gallon Sprint Car Tank Kit, 12 AN Top with Baffle
    x
                Fuel Safe has long been the leader in Sprint Car tanks and bladders.  All bladders meet stringent safety requirements and are serial numbered.  Speedway now offers tank kits with or without the anti-surge baffle and the new popular collector options.  All tanks have molded in mounts for all current Sprint Cars.  Tank kits comes complete with pickup and upper plate with cap and vent.  For use with alcohol fuel only.
            
  • Injector Stack Wash Plugs, 2.136 - 2.312 Inch, Set/10
    Injector Stack Wash Plugs, 2.136 - 2.312 Inch, Set/10
    x
                
    • Tapered plugs for fuel injector stacks
    • Made from high impact plastic
    • Set of 10
  • Micro/Mini Sprint Suzuki Intake Adapters
    $229.99
    $249.99
    Micro/Mini Sprint Suzuki Intake Adapters
    x
                

    Convert your fuel injected Suzuki engine to carburetors in minutes by using these flowed adapters.  Accepts stock o-rings.

    • Converts fuel injected Suzuki engine to carburetors
    • Installation kit includes 4 boots and 8 clamps
  • Aeroquip Special Application Socketless AN Hose, Black
    Aeroquip Special Application Socketless AN Hose, Black
    x
                
  • Textile braid reinforcement
  • Low pressure design for use with socketless reuseable fittings only
  • No hose clamp necessary
  • Ideal hose for fuel line applications
  • 50,000 ft of hose in stock!
  • Construction: AQP elastomer tube, textile braid reinforcement, black AQP elastomer cover.

    Application: For gasoline, fuel and lubricating oils, air and water. Not recommended for hydraulic impulse applications and is not approved for air brake, hydraulic brake or power steering applications.

    Operating Range: Max Operating pressure: 250 PSI. Minimum burst pressure: 1000 PSI. Operating Temperature Range -40°F to 300°F. Air not to exceed +250°F and water not to exceed +180°F. Reduced pressure operation allows for temperatures up to 300°F.

    Aeroquip Hose Sizing Guide (GIF)

    Hose Fitting Sizing Chart (GIF)

  • Quick Release Cable or Linkage End, 1/4-28 RH
    Quick Release Cable or Linkage End, 1/4-28 RH
    x
                These steel ends are perfect for throttle cable or linkage that needs to be quick release. They have the same thread on the stud as they do in the body. 
            
  • K&N Filters 99-0516 Air Filter Oil, Aerosol
    K&N Filters 99-0516 Air Filter Oil, Aerosol
    x
                

    K&N Air Filter Oil is the only oil specially formulated to work in combination with the cotton fabric in K&N Filtercharger elements providing a superior air filtration system. When used as directed, it quickly penetrates the filter pleats, where it remains suspended in the cotton fabric. Saturation is maintained until the element is cleaned with K&N Air Filter Cleaner.

    NOTE: Aerosol items cannot be shipped by air.

  • Fuel Safe 7 x 12 Inch Aluminum Fuel Cell Cover Plate
    Fuel Safe 7 x 12 Inch Aluminum Fuel Cell Cover Plate
    x
                

    These replacement front covers are perfect for your fuel cell with a 7" x 12" opening.  They are designed to fit the front side of the tank for your Sprint car and feature quality aluminum construction.

    • Replacement cover
    • Fits front of fuel cell
    • 7" x 12"
    • Aluminum
  • Speedway Engine Vent Tube with Breathers
    Speedway Engine Vent Tube with Breathers
    x
                  Vent tube with breathers. Adaptors weld into front of aluminum or steel valve covers.

  • Pump Frame Tube Clamp for 1-1/4 Inch Tube
    Pump Frame Tube Clamp for 1-1/4 Inch Tube
    x
                

    Pump Frame Tube Clamp for 1.250" Tube for FUELAB Prodigy pump.

  • Fuel Pump Installation Kit, Walbro GL392
    Fuel Pump Installation Kit, Walbro GL392
    x
                You cannot properly install your new fuel pump without the necessary fittings.  This hardware kit is for installation of Walbro GL392 inline racing fuel pump (960-392).
    • Installation of Walbro GL392
    • Kit includes:
      • (2) two brass rings
      • (2) two nuts
      • (2) two star washers
      • (2) two closed-end wire connector/terminals

     

  • Purple 10 Inch Aluminum Fuel Filter, Stainless Element
    Purple 10 Inch Aluminum Fuel Filter, Stainless Element
    x
                High flow design offers excellent performance for all racing applications. Purple anodized aluminum housing with a washable and reusable 45 micron stainless steel element. For use with both alcohol and gasoline.

    Choose AN inlet/outlet sizes needed: AN6, AN8, AN10, AN12.

    NOT compatible with ethanol (E85). 

  • Hilborn Fuel Injection PG150D/CL S0 1.7 Billet GPM Fuel Pump
    Hilborn Fuel Injection PG150D/CL S0 1.7 Billet GPM Fuel Pump
    x
                

    Hilborn's factory flow-tested mechanical fuel pumps can be used with gas, alcohol or nitro applications. Rotation can be easily reversed to accommodate cam drives or belt drives.

    This billet aluminum pump is almost 1-1/2 lbs. lighter than the cast aluminum model. The clamp base model offers you the convenience of a quick disconnect. This pump can be rotated for easy access to fittings. Includes "Y" fitting which converts one #8 outlet to three #6 outlets. 

    Sizes: #00, #0, #S0, #1/2

    The full range of capacity from size #00 through size #1/2 is from .67gpm to 2.22gpm. All pumps rated at 1800rpm with 50psi. 

     

  • AN6 Fuel Shut Off Valve
    $49.99
    Product Rating: 4.50 Stars
    AN6 Fuel Shut Off Valve
    x
                

    Stainless steel ball with Teflon™ packings in machined aluminum housing, fittings and handle.  Straight through installs inline, on and off high flow valve.

     

    Fuel Tank Assembly

     

  • Peterson Fluid Systems 09-0910 Panel Mount Fuel Shut Off Valve, AN6
    Peterson Fluid Systems 09-0910 Panel Mount Fuel Shut Off Valve, AN6
    x
                Panel mount is AN6 male with offset style handle. Fuel cell ball valve mounts in plate, has an extra long bulkhead shaft. Required for many Sprint cars. Will work on our steering mount 546-200. 
            
  • Aluminum Fuel Manifold Fitting
    Aluminum Fuel Manifold Fitting
    x
                          This handy little aluminum fuel manifold fitting allows you to plumb all your return lines right at the injector. That saves you weight and space because you don't have to run all the lines back to the tank. Choose AN8 or AN10 to lead to three AN6 male ends.            
            
  • Stallard Chassis BC230-246 Micro Sprint Throttle Cable Adapter
    Stallard Chassis BC230-246 Micro Sprint Throttle Cable Adapter
    x
                

    These Stallard collars are designed to be used as a throttle rod stop or rod adapter. They have a black oxide finish and feature a set screw to secure it.

    Stallard Mico Sprint Throttle Cable Adapter

    • 1/4" I.D.
    • .68" O.D.
    • Steel
    • Black oxide
    • Throttle Cable throttle rod adapter
    • Fits Stallard cars only

  • Small Block Chevy Intake Bolt Kits
    Small Block Chevy Intake Bolt Kits
    x
                A bolt kit for S/B Chevy intakes. All feature that unique King Chrome premium chrome plating.
            
  • Mr. Gasket 1514 Chrome Fuel Pump Mounting Plate, Small Block Chevy
    Mr. Gasket 1514 Chrome Fuel Pump Mounting Plate, Small Block Chevy
    x
                

    Mr.Gasket announces a fuel pump mounting plate to dress up the fuel pump area of your engine. This chrome plated mounting plate, for the 265-400 cu. in. Chevrolet small block engine, is ideal for mounting a stock OEM pump. The mounting plate is precision cut to cover the stock fuel pump opening and is complete with gasket.

    • Quality chrome finish
    • Fits 265-400 SBC engines
    • Mounts stock OEM pump
    • Includes gasket
  • Fuel Injection Wash Plugs, 2-7/16 Inch, Set/8
    Fuel Injection Wash Plugs, 2-7/16 Inch, Set/8
    x
                These fuel injection plugs have an o-ring for a dirt and water tight seal. Each plug is designed to hold a spark plug and an injection nozzle. Comes in a set of eight for 2-7/16" injection holes. 
  • Replacement O-Ring for Fuel Filter Ends
    Replacement O-Ring for Fuel Filter Ends
    x
                Replacement O-ring for Speedway 6" and 10" aluminum fuel filters. Compatible with  both methanol and gasoline. Works with stainless and paper filter elements. 

    NOTE: Springs and filter elements shown for assembly reference only. O-rings are sold EACH.

    Fuel Filter Configurations (GIF)

     

     

  • Universal Electric 4-7 PSI Fuel Pump
    Universal Electric 4-7 PSI Fuel Pump
    x
                

    Inexpensive solid state universal fuel pump for stock engines. Set for 4-7 psi and flows up to 35 gph. 12 volt. 1/8" npt inlet and outlet and includes two barbed hose fittings to connect to 5/16" hose.

    This pump is NOT self priming; it must be mounted below the gas tank to prevent the pump from running dry and over heating.  Failure to do so will cause premature failure of the pump.

    910-11520 Instructions (PDF) 

  • Kinsler Fuel Injection 3112 Fuel Line Bypass Pill Holder
    Kinsler Fuel Injection 3112 Fuel Line Bypass Pill Holder
    x
                A must for alky high-volume pumps. Anodized for alky fuels. 2 lb spring included. Outside safety pin. 7 lb or 12 lb bypass spring available. AN6 fittings.

    Can be used as a bypass pressure relief valve for alky or gas carburated fuel systems when installed in a return bypass line. We suggest using the 7lb spring and a 150 pill for the alky application.

  • Speedway Filter Boot Clamp
    $2.99
    $3.99
    Speedway Filter Boot Clamp
    x
                

    Boot clamp for Speedway Molded Air Box.

  • Fuel Pump/Fuel Filter Housing Tube Clamp
    Fuel Pump/Fuel Filter Housing Tube Clamp
    x
                
    • Holds any 2.075" diameter pump or a 2" diameter fuel filter housing securely to frame
    • Clamps to 1.25" and 1.375" tubing sizes
    • Perfect for Carter or Walbro style pumps and 2" diameter fuel filters
    • Billet aluminum construction
  • R2C Performance R2C0210A6 14.5 Inch Outerwear Oval Prefilter Cover
    R2C Performance R2C0210A6 14.5 Inch Outerwear Oval Prefilter Cover
    x
                

    Make the longest lasting filter on the market last even longer!  R2C Performance prefilters not only add life to your filters, but they also ensure ample flow to your engine.  And the more fresh air that your engine ingests, the more power that it can produce.  R2C prefilters are made from durable polyester to grab those larger particles and protect your air filter from the elements without impeding flow.  Feed your engine the cleanest air possible and protect your air filters with R2C prefilters.

    Outerwear Prefilter Cover

    • Excellent first line of defense
    • Elastic bands hold secure to filter element
    • Slip fit over molded air box for additional protection
    • Easily Washable
    • Black polyester

    NOTE:  Prefilter only!  Filter is not included.

  • R2C Performance STK10500 Sprint Car Engine Air Intake Velocity Stacks
    R2C Performance STK10500 Sprint Car Engine Air Intake Velocity Stacks
    x
                These R2C Sprint Car Air Intake Velocity Stacks are made from high quality magnesium and work with our 2.5" oversized filter for best performance.
    • ASCS stacks for 2.5" oversize filter
    • 2-3/16" in diameter
    • Overall Height: 6.20"
    • Natural finish
    • Magnesium
    • Helps with torque from 2000 RPM through redline. 
  • Aeroquip Special Application Socketless AN Hose, Blue
    Aeroquip Special Application Socketless AN Hose, Blue
    x
                
  • Textile braid reinforcement
  • Low pressure design for use with socketless reuseable fittings only
  • No hose clamp necessary
  • Ideal hose for fuel line applications
  • 50,000 ft of hose in stock!

    Construction: AQP elastomer tube, textile braid reinforcement, blue AQP elastomer cover.

    Application: For gasoline, fuel and lubricating oils, air and water. Not recommended for hydraulic impulse applications and is not approved for air brake, hydraulic brake or power steering applications.

    Operating Range: Max Operating pressure: 250 PSI. Minimum burst pressure: 1000 PSI. Operating Temperature Range -40°F to 300°F. Air not to exceed +250°F and water not to exceed +180°F. Reduced pressure operation allows for temperatures up to 300°F.

    Aeroquip Hose Sizing Guide (GIF)

  • Hose Fitting Sizing Chart (GIF)

  • Hilborn Fuel Injection F1047-12 Injection Stack, 2-7/16 Inch
    Hilborn Fuel Injection F1047-12 Injection Stack, 2-7/16 Inch
    x
                Lightweight steel. 12" tall with rolled bell for more air flow. These fuel injection stacks are sold individually, so you must purchase eight to get a complete set.
            
  • Peterson Aluminum Stack Restrictors, 2.425 Inch O.D., Set/8
    Peterson Aluminum Stack Restrictors, 2.425 Inch O.D., Set/8
    x
                

    Have to run stacks or sleeves in your injection? Peterson Fluid Systems makes the best flowing restrictors on the market. ASCS legal.

    Set of 8.

  • Yamaha Intake Boot
    $16.99
    Yamaha Intake Boot
    x
                
    • Connects airbox to backside of carb
    • Durable, non-cracking or ripping
Goto Previous PagePrevious Page
1 2 3 4 5 ... 20