Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Muscle Cars At Speedway Motors

There is no denying that muscle cars are the hottest rides on the street right now. Speedway Motors has the high performance muscle car parts to take you back to the '60s and '70s! Whether you run a Chevy, Ford or Mopar, you can find the right stuff for it here! Similar to your muscle car, Speedway Motors leaves our competitors in the dust when it comes to prices and selection.

Featured Products
Small Block Chevy 4340 Steel H-Beam Rods, Bushed Pin
Small Block Chevy 4340 Steel H-Beam Rods, Bushed Pin
(Part #91015328)
x
            

Heavy duty H-beam connecting rods for S/B Chevy. Full floating wrist pin in silicon bronze bushing. Precision bolt bushing to positively locate cap. Features 8640 PCE 7/16" cap screws.

Weight matched sets of 8. Available in 5.7" or 6.0" lengths.

Speedway Chevy Universal Aluminum Radiators
Speedway Chevy Universal Aluminum Radiators
(Part #917347)
x
            

Speedway’s line of universal Chevy radiators makes it easy for budget-minded racers to get a professional-quality aluminum racing radiator. These high performance radiators feature furnace-brazed construction, two rows of large 1" aluminum tubes, billet filler necks and a maximum number of fins per inch for great heat transfer. They are not available with transmission coolers and they do not come with mounting brackets.

These Chevy-style radiators have driver’s side upper inlets, passenger side lower outlets, and can be ordered in a variety of custom widths.

  • All-aluminum, furnace-brazed construction
  • No cheap epoxy glue or crimped in gaskets
  • Maximum amount of fins per inch allows greater heat transfer
  • Billet filler necks
  • Available in 22", 24", 28", or 31" widths (measurements include tanks)

Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article, Radiator Cooling Performance.

1978-Up GM Metric Brake Calipers, IMCA Approved
1978-Up GM Metric Brake Calipers, IMCA Approved
(Part #91031045)
x
            

These stock replacement single piston Metric calipers were standard equipment on 1978-88 GM mid-size cars (Cutlass, Grand Prix, Regals, Monte Carlo, etc.). They feature a 2.38" single piston, shielded bottom inlet, and will save 3-1/2 lbs. per side compared to mid-size 1969-1977 caliper.

 

  • IMCA approved
  • No core charge required
  • 7/16"-20 inlet
  • Can be used with brake hoses from Pre-1978 GM intermediate cars
  • Brake pads & bolts sold separately

 

Note: Does NOT include brake pads or slider bolts and bushings.

Ford 9 Inch Posi Traction Third Member Assembly
Ford 9 Inch Posi Traction Third Member Assembly
(Part #91048345)
x
            

Speedway Motors now offers you a 9" Ford street 3rd member for your street rod. We reclaim genuine Ford 9" housings, clean, inspect and install all new components. All bearings, seals, 1310 series yoke and ring & pinion are new!

These Ford 9" 3rd member assemblies feature new Pro Gears ring & pinion, choice of 3.50, 3.70, 3.89, 4.11 or 4.56, Currie 9-Plus limited slip differential, 28 or 31 spline. Shipped in handy plastic carrying case. Assembled by professionals.

Gear lube recommendations :

  • 91044090 - for street and every day driving under normal conditions
  • 91044140 -  for extreme duty, towing, or very hot climates

Currie Differential Tech Bulletin (PDF)

Instructions (PDF)

Three Plain 9 Super 7 Carbs on 1957-86 SB Chevy Edelbrock Intake
Three Plain 9 Super 7 Carbs on 1957-86 SB Chevy Edelbrock Intake
(Part #9251220)
x
            

This tri power kit uses the Edelbrock C-357-B S/B Chevy 3x2 intake with Speedway's 9 Super 7® carbs. It has progressive linkage to give you good driveability and economy, but power when you need it. The manifold has a balanced 180° firing order port runner arrangement. It contains an exhaust gas heat riser and offers excellent performance potential. (idle-5500 rpm)

Kit includes three carbs, the intake, air cleaners, linkage kit, fuel block, fittings and red fuel line. Assembly required. Fits 1957-1986 Chevy 262-400 c.i.d. small-block Chevys.

9 Super 7® Linkage Instructions (PDF)

Note: Not applicable to an HEI based distributor system due to a clearance issue. This system must be used in conjunction with a small diameter based distributor.

The 9Super7 Carb  makes setting up a multiple carburetor induction system easier than when Strombergs were available new. Our 3 Carb kits come with one primary carburetor and two secondary carburetors while the 2 Carb kits are both primary carbs.  See our Multiple Carburetor Tech Tip for more information on using the 9 Super 7 in a 2x2 or 3x2 carb set-up.

  • Three Deuce carburetor setups come with two "secondary" carbs for front and rear intake position and one "primary" carb for central/middle position
  • All-new tooling for crisp, flawless castings
  • New aluminum base assembly allows for cooler fuel temps and better fuel efficiency as compared to the original cast iron design
  • Stainless steel screws and hardware
  • Original troublesome needle and seat replaced by a Grose-style fuel inlet valve to better cope with higher fuel pressures and improved high speed running 
  • Will not stick or dribble like the old Viton-tipped needle and seat setups
  • Extended brass throttle shaft to simplify multi-carb linkage
  • Primary Carb - (1) Middle Position
    • Choke assembly, accelerator pump, and jets have all been faithfully retained and accept standard Stromberg parts
  • Secondary Carb - (2) Front and Rear Position
    • Special base plate with no idle circuits or choke linkage
    • Special butterflies and shafts installed
    • Works best with progressive linkage
    • Idle only off the center or main carburetor
    • No more plug foul

Note: The secondary carbs have NO choke, and they have NO idle system.

915-11655 Primary 9 Super 7 Carburetor Instructions (PDF)

Longacre 72702 Computerscales WIRELESS AccuSet II
Longacre 72702 Computerscales WIRELESS AccuSet II
(Part #47572701)
x
            
Save yourself time with the II and its baseline memory recall. It will store your baseline setup so you can compare it to your current setup. It has 1 slot memory that is easy to use and very helpful. The display will show all 4 wheel weights plus the cross weight. The partial % will show with the push of one button. The display face is slanted for easier viewing.
  • Accuset II control box with ZigBee wireless receiver
  • Includes Free deluxe scale pad box
  • 4 wireless pads
  • No wires to trip over, no fragile modules outside the pad
  • 4 line display shows all weights and partial %
  • LMF Satin finished pads with single load cells
  • CNC machined 15" low profile scale pads with handles and recessed connectors
  • 1/10% accuracy and 1500 lbs per pad capacity
  • Two-year limited warranty
Speedway Universal 20 Circuit Wiring Harness
Speedway Universal 20 Circuit Wiring Harness
(Part #91064027)
x
            Whether you're building an option loaded car or just want to have extra circuits available for future updates, this harness is perfect and makes any job painless. Compact 5-1/2"L x 4-1/2"W x 3-1/4"H  fuse block holds 18 standard push-in fuses and can be mounted almost anywhere. 

Each high temperature wire is color coded and labeled every six inches. Also includes GM type steering column connectors. To keep costs down and the quality high, this harness does not include any switches, light sockets or plugs that you would normally already have.

  • Harness has 20 circuits, of which 18 are fused
  • Taillight leads measure 17' long
  • Includes plug for GM column, headlight switch, dimmer switch, and signal flashers

Wiring Harness Installation Instructions (PDF)

Note: The connectors on the ribbon plug that go to the steering column include male connectors for use with a non-keyed steering column. If you have a keyed steering column, you'll need to purchase an additional adapter, such as 91064040 or 91064039.

Smoothie Rams Horn Exhaust Manifolds, Small Block Chevy, Raw
Smoothie Rams Horn Exhaust Manifolds, Small Block Chevy, Raw
(Part #9300329)
x
            

These classic "Rams Horn" style exhaust manifolds are great for use with most small block Chevy applications, providing optimal clearance for angle plug heads.  These manifold kits come complete with all mounting hardware and gaskets.

  • Ground smooth with no external bosses or brackets
  • 2-1/2" outlet
  • Plain, Raw finish
  • Nodular cast iron
  • For angle or straight plug heads
  • Includes all hardware and gaskets

"Muscle Car" Page 1 of 25

  • Lokar SG-6009 Chrome Dimmer Switch Cover, Chevy/Ford
    Lokar SG-6009 Chrome Dimmer Switch Cover, Chevy/Ford
    (Part #4916009)
    x
                Brighten up that old dimmer switch with one of these new dimmer switch covers from Lokar!  Made from steel and feature a beautiful chrome finish and a textured rubber pad. 
            
  • TCI 745504 Midplate Spacer Kit, 1/4 Inch Thick
    TCI 745504 Midplate Spacer Kit, 1/4 Inch Thick
    (Part #282745504)
    x
                

    TCI® Seven, Eight, Nine and Ten inch Race Torque Converters are designed to allow use with or without a midplate. The converter has the stock length nose piece. By removing the sleeve on the pilot, you can use this 1/4" extension.

    Contains:

    • 1 - Pilot Extension
    • 3 - 1/4" Washers
    • 3 - Long converter bolts

    Midplate Spacer Kit Instructions (PDF)

  • Modern Driveline Reverse Switch Harness - GM T5, T-56 Transmissions
    Modern Driveline Reverse Switch Harness - GM T5, T-56 Transmissions
    (Part #91070002)
    x
                

    These harnesses for transmission neutral safety switch/reverse light switches are designed for use with GM T5 and T56 transmissions.

    • Factory style
    • For GM T5 and T56 transmissions

     

  • Lokar XSRK-4001 Black Stainless Steel Carburetor Bracket
    Lokar XSRK-4001 Black Stainless Steel Carburetor Bracket
    (Part #49104001)
    x
                

    Stainless bracket mounts to rear of Holley, Edelbrock, AFB, Quadrajet, Demon, and In-Line Dual Quads.  Design provides improved clearance on Edelbrock carbs. Design includes tension screw to prevent bracket from movement under extreme pressure on a kickdown cable, such as with a 700-R4 transmission.

    • Mounts to rear of Holley, Edelbrock, AFB, Quadrajet, Demon, and In-Line Dual Quads
    • Stainless steel
    • Improved clearance on Edelbrock carbs
    • Includes tension screw to prevent bracket movement under extreme pressure

    49104001 Installation Instructions (PDF) 

  • DEi 010393 Reflect-A-GOLD Heat Reflective Tape, 24 x 24 Inch Sheet
    DEi 010393 Reflect-A-GOLD Heat Reflective Tape, 24 x 24 Inch Sheet
    (Part #35610393)
    x
                Reflect-A-GOLD is a metalized polyamide  polymer laminated glass cloth with a high temperature pressure sensitive  adhesive for use in extreme temperature swing environments. It is  lightweight and easy to apply and remove. 

    Highly effective material for firewalls, fuel cells, engine covers, under hoods, engine compartment, bulk heads, seat bottoms – anything or area that needs protection from heat.

    • For firewalls, bulkheads, engine covers, floors, seat bottoms & more
    • Capable of handling continual temperatures up to 850°F
    • Resists UV degradation for long-term performance
    • Virtually NO clearance needed
    • Adhesive protected by a release liner rated up to 325°F
    • Light weight and flexible-Trim to size
    • Space age polymer material
    • Reflects up to 850°F! Reflecting 80% of heat!
    • Ultra light weight and self adhesive
  • COMP Cams 750-16 Steel Valve Spring Retainers, 1.250 Inch OD, Set/16
    COMP Cams 750-16 Steel Valve Spring Retainers, 1.250 Inch OD, Set/16
    (Part #28275016)
    x
                Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs. COMP Cams® Steel Retainers are the perfect solution to this problem. COMP ® engineers used 3D CAD with FEA to design retainers with a modern and advanced contoured top profiling for lower stress, increased lift and a reduction in mass. The retainers are CNC-machined to exact tolerances using CAD/CAM software. All COMP ® retainers use only high-grade SAE 4140 chromemoly steel with no lead, <0.04% sulfur and a black oxide finish to prevent corrosion. COMP Cams ® Steel Valve Spring Retainers offer both unmatched looks and superior performance that set the industry standard. 
    • Includes 16 Retainers
    • Super Lock™ Retainers
    • 10° Lock Angle - All Valve Stem Sizes - 1.250" Spring Diameter
    • 1.250 in. Outside Diameter
    • .735 in. Inside Diameter

     

  • 1970-74 Challenger / Cuda Fuel Sending Unit, 3/8 Inch Outlet
    1970-74 Challenger / Cuda Fuel Sending Unit, 3/8 Inch Outlet
    (Part #91010244)
    x
                These quality fuel sending units are designed as  replacements for 1970-74 Dodge Challenger & Plymouth Cuda.  Will work with factory  style fuel level gauges.
    • 70-74 CHALLENGER & CUDA
    • 3/8" OUTLET
    • OEM Replacement fuel sender/pickups
    • Designed for use with factory fuel level gauge

    LH/RH Swing Guide (Link)

    Ohms Chart (Link)

  • DEi 050371 Boom Mat Speaker Baffle, 6 X 8 Inch Oval Slim
    DEi 050371 Boom Mat Speaker Baffle, 6 X 8 Inch Oval Slim
    (Part #35650371)
    x
                Please view the product's page for more information
            
  • Heater Core for 1965-67 Ford Galaxie and Custom Passenger Car
    Heater Core for 1965-67 Ford Galaxie and Custom Passenger Car
    (Part #910399001)
    x
                For your 1965-67 Ford / Mercury passenger car, use a 100% new heater core,   not a marginal   recore like others sell. All heater cores are a   direct fit  factory replacement for applications without A/C. 
    • All new construction
    • Direct fit factory replacement for 1965-67 Ford Galaxie and Custom
    • Please note: non air applications

    Note: These heater cores may be shipped either aluminum or copper/brass, depending on application & inventory/stock. 

  • COMP Cams 1631-16 Ultra Pro Magnum    Roller Rocker Arms, Ford 3/8 - 1.6
    COMP Cams 1631-16 Ultra Pro Magnum Roller Rocker Arms, Ford 3/8 - 1.6
    (Part #2821631)
    x
                Please view the product's page for more information
            
  • Mikise Power Pic Filter Cleaner Spout
    Mikise Power Pic Filter Cleaner Spout
    (Part #910606420)
    x
                

    New economy air filter cleaner to clean your air filter from the inside out.  Hooks to a standard garden hose to direct multiple high pressure sprays streams where needed.

    • Clean your air filter from the inside out
    • Hooks to a standard garden hose
  • Holley 20-132 LS Accessory Drive Bracket-ALT, P/S, A/C
    Holley 20-132 LS Accessory Drive Bracket-ALT, P/S, A/C
    (Part #42520132)
    x
                Please view the product's page for more information
            
  • Lokar KD-2400U TH400 Electric Kickdown Kit, Black
    Lokar KD-2400U TH400 Electric Kickdown Kit, Black
    (Part #4912400)
    x
                

    Electric switch is housed in a billet aluminum box that mounts with transmission pan bolts. Turbo 400 transmission kickdown kit includes "U-Cut-to-Fit" black outer housing. Designed with a specially extruded liner for extended life of the cable, aluminum fittings and stainless steel inner wire and stainless mounting bracket.  This design eliminates mounting unsightly electrical switches on carburetor, manifold, or near throttle pedal.

    Complete installation instructions for TH400 included in kit.

  • Lokar 1210144 Anchor-Tight Locking Trans Dipstick, Powerglide, Brite
    Lokar 1210144 Anchor-Tight Locking Trans Dipstick, Powerglide, Brite
    (Part #4911210144)
    x
                

    You have flexibility with Lokar's teflon-lined braided stainless transmission dipstick. Kit comes complete with braided stainless outer housing and heat resistant E-Z to read flexible inner dipstick measuring cable. Billet aluminum handle and billet aluminum fittings complement Lokar's flexible dipsticks.

    NHRA accepted for use in all categories of competition!

    • No filler tube needed
    • Locking mechanism eliminates expulsion of dipstick handle under trans pressure
    • Bolted in sealed pan fitting
    • Large filler tube accepts standard transmission funnels
    • Made from 6061-T6 aluminum
    • Teflon-lined stainless braided outer housing
    • Flexible inner dipstick measuring cable
    • No pan fitting leaks during storage
    • Dipsticks available with firewall mounting bracket
    • Supplied with transmission storage plug for quick change & storage
    • Spare trans fittings available for quick transmission changes
    • Available for GM Powerglide transmissions
    • Available in brite anodized finish

    Application Chart for Locking Flexible Transmission Dipsticks (Link)

    4911210144 Installation Instructions (PDF) 

  • COMP Cams 741-16 Steel Retainers, 1.55 Inch, 10 Degree
    COMP Cams 741-16 Steel Retainers, 1.55 Inch, 10 Degree
    (Part #28274116)
    x
                

    Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs. COMP Cams® Steel Retainers are the perfect solution to this problem. COMP® engineers used 3D CAD with FEA to design retainers with a modern and advanced contoured top profiling for lower stress, increased lift and a reduction in mass. The retainers are CNC-machined to exact tolerances using CAD/CAM software. All COMP® retainers use only high-grade SAE 4140 chromemoly steel with no lead, <0.04% sulfur and a black oxide finish to prevent corrosion. COMP Cams® Steel Valve Spring Retainers offer both unmatched looks and superior performance that set the industry standard.

    • Includes 16 Retainers
    • Super Lock™ Retainers
    • 10° Lock Angle - All Valve Stem Sizes - 1.500" -1.550" Spring Diameter
  • Taylor 20314 14 Inch Braided Grounding Strap Cable
    Taylor 20314 14 Inch Braided Grounding Strap Cable
    (Part #69820314)
    x
                These braided grounding straps from Taylor Cable are 14" long 4-gauge and feature tin coated copper construction.
    • 14" long
    • 1" wide
    • Tin coated copper
    • 4-gauge

    Taylor Cable Warranty Sheet (PDF)

  • Edelbrock 14064 Endurashine Performer 600 CFM 4 BBL Carb, Electric
    Edelbrock 14064 Endurashine Performer 600 CFM 4 BBL Carb, Electric
    (Part #32514064)
    x
                Please view the product's page for more information
            
  • Titan Tools 32980 5LB Telescoping Magnetic Pick Up Tool
    Titan Tools 32980 5LB Telescoping Magnetic Pick Up Tool
    (Part #72811663)
    x
                These 5lb magnetic pick up tools will telescope from 6-1/2" to 33" and are ideal for retrieving dropped parts, fasteners, and tools. They feature a 3/4" diameter head with a comfortable textured cushion grip. 
    • 5lb telescoping magnetic pick up tool
    • 5lb magnet with shielded sides for targeted pick-ups
    • 3/4" Diameter head
    • Telescopes from 6-1/2 to 33"Ideal for retrieving dropped parts, fasteners and tools.
    • Comfortable textured cushion grip
  • Heater Core for 1969-70 GM Full Size Passenger Car
    Heater Core for 1969-70 GM Full Size Passenger Car
    (Part #910398218)
    x
                For your 1969-70 GM full size passenger car, use a 100% new  heater core, not a marginal recore like others sell. All heater cores  are a direct fit factory replacement for applications not originally  equipped with A/C.
    • All new construction
    • Direct fit factory replacement for 1969-70 GM FULL SIZE
    Note: These heater cores may be shipped either aluminum or copper/brass, depending on application & inventory/stock.
  • Heater Core for 1963-64 GM Mid Size Passenger Car w/ Factory Air
    Heater Core for 1963-64 GM Mid Size Passenger Car w/ Factory Air
    (Part #910399047)
    x
                For your 1963-64 GM Full Size passenger car, use a 100% new heater core,   not a marginal   recore like others sell. All heater cores are a   direct fit  factory replacement for applications with A/C. 
    • All new construction
    • Direct fit factory replacement for 1963-64 GM Full Size passenger car with factory air
    • Please note: factory air applications

    Note: These heater cores may be shipped either aluminum or copper/brass, depending on application & inventory/stock. 

  • Small Block Chevy Steel Side Engine Mount Kit
    Small Block Chevy Steel Side Engine Mount Kit
    (Part #91018058)
    x
                

    Use these universal small block Chevy engine mounts to fit your high-horsepower motor to the desired chassis of your choice.  They are constructed of beefy .18" thick steel for safety and performance.

    • Small Block Chevy applications
    • Universal chassis applications
    • Sturdy steel construction
    • Hardware included
  • COMP Cams 4512-16 Hi-Tech Race Rocker Studs, Big Block Chevy
    COMP Cams 4512-16 Hi-Tech Race Rocker Studs, Big Block Chevy
    (Part #282451216)
    x
                

    COMP Cams® takes pride in having the finest rocker arm studs available on the market. The High Energy™ and Magnum series studs work well in applications with moderate lifts and spring pressures and are available in the popular 3/8” and 7/16” sizes. When ultimate strength is required as with high rpm roller cam applications, the Hi-Tech™ Race Stud is the answer. This stud has a thin jam nut for rocker clearance, rolled threads for maximum contact and a ground-flat top so accurate valve adjustment can be achieved and maintained. The diameter of the jam nut is larger in order to spread the load over a larger area. All COMP Cams® studs have generous radii and a black oxide finish.

    • Set of 16
    • 7/16  Inch Diameter
    • Designed for ultimate strength and locking force
    • High Energy™ and Magnum polylocks are best for moderate lift and spring pressure applications
    • Hi-Tech™ Polylocks work well in all high end race applications
    • The stud girdle polylocks are precision ground for minimum runout and tapered for extra strength in the locking area
  • Speedway Dry Erase Marker Board, 17-1/2 Inch x 19-1/2 Inch
    Speedway Dry Erase Marker Board, 17-1/2 Inch x 19-1/2 Inch
    (Part #9109989)
    x
                These dry erase boards are great for making notes at the track or  in the garage.  Their convenient 17-1/2" x 19-1/2" size make them easy  to transport. 
    • Stamped aluminum
    • 17-1/2" tall x 19-1/2" wide
  • MSD ASY11549 RPM Pill Module, 8200 RPM
    MSD ASY11549 RPM Pill Module, 8200 RPM
    (Part #910128200)
    x
                

    You can easily change the RPM limit on your MSD ignition box by switching RPM modules. These chips are for 8200 RPM limit applications.

    • ASY11549 - Single MSD 8200 RPM Module 
    • Easily change the RPM limit on your MSD ignition box

    MSD Rebate (Link)

     

  • Small Block Chevy Black Alternator Bracket
    Small Block Chevy Black Alternator Bracket
    (Part #91667896)
    x
                

    These rugged, hi-tech aluminum alternator brackets feature a painted black finish. They attach to front of cylinder head of any Small Block Chevy with a short water pump. Mounting hardware is included.

    • Rugged, hi-tech aluminum bracket with a painted black finish.
    • Attaches to front of cylinder head of Small Block Chevy.
    • Mounting hardware included
    • Fully adjustable
    • For use with short water pump 
  • GM Performance 19244450 Small Block Chevy 350/290 Deluxe Crate Engine
    GM Performance 19244450 Small Block Chevy 350/290 Deluxe Crate Engine
    (Part #35519244450)
    x
                Please view the product's page for more information
            
  • DEi 040200 Radiator Relief    Coolant Additive, 16 oz. Bottle
    DEi 040200 Radiator Relief Coolant Additive, 16 oz. Bottle
    (Part #35640200)
    x
                

    Radiator Relief™ supercharges your radiator by transferring heat more efficiently through the radiator. Similar to the original formula this proven coolant additive will reduce your operating temperature up to 30°F reducing engine wear that occurs during extreme use.

    Radiator Relief™ is also formulated with a corrosion inhibitor that reduces mineral deposits. This is the first additive that maintains pH levels that otherwise fluctuate over time resulting in core damage.

    • Reduces engine temperature up to 30˚F
    • Includes anti-foaming agent
    • Formulated with a corrosion inhibitor
    • No mixing required; just add to cooling system!
    • Reduces pre-existing scale build-up
    • Safe with all alloys
    • Compatible with water and all types of anti-freeze products
    • 100% Biodegradable, Non-Corrosive and Non-Toxic Additive
    • For use in all water cooled engines

    Radiator Relief Frequently Asked Questions (PDF)

    Learn more about how cooling systems work with proper coolant mixture and additives by reading our tech article. Cooling System Principles.  

  • Edelbrock 14073 Performer 4 Barrel Carb, 750 CFM, Manual Choke, Black
    Edelbrock 14073 Performer 4 Barrel Carb, 750 CFM, Manual Choke, Black
    (Part #32514073)
    x
                Please view the product's page for more information
            
  • Black 12 Volt Horn Kit
    $24.99
    $30.00
    Product Rating: 5.00 Stars
    Black 12 Volt Horn Kit
    (Part #91122663)
    x
                These horn kits include one low-tone and one high-tone horn  with hardware. Black plastic construction. Horns have a centrally  located 5/16” stud on the back side for mounting. A 4-prong relay is  also included. 12 volt operation.

    Kit includes:
    • Two 5/16” x 1” bolts, nuts and washers
    • Two 90 degree brackets about 1-1/8” long on each side
    • Four flat brackets that are 3-1/4” with mounting holes 2-1/2” on center
    • Also includes a grounding pig tail with eyelet on one end and flat female spade connector on the other to match up to the horn
  • 1963-67 Corvette Fuel Tank Strap Set
    $41.99
    $51.99
    1963-67 Corvette Fuel Tank Strap Set
    (Part #9109255)
    x
                Replace those missing, rusted, or worn out gas tank  straps with these new OEM replacement straps.  They are sure to keep  that new tank safe, secure, and where it belongs.
    • 1963-67 CORVETTE STRAP KIT
    • Original style tank straps with hardware
    • 30" long
    • Satin coated steel
    • Sold in sets of (2) straps
  • 1971-72 Charger / Coronet / Roadrunner Fuel Sending Unit
    1971-72 Charger / Coronet / Roadrunner Fuel Sending Unit
    (Part #91010283)
    x
                These quality fuel sending units are designed as  replacements for 1971-72 Dodge Charger, Coronet & Plymouth Roadrunner. Will work with  factory style fuel level gauges.
    • 1971-72 CHARGER, CORONET & ROADRUNNER
    • 5/16" OUTLET
    • OEM Replacement fuel sender/pickups
    • Designed for use with factory fuel level gauge

    LH/RH Swing Guide (Link)

    Ohms Chart (Link)

  • Ram 88764HDX GM Performance Clutch Set, 11 x 1-1/8 Inch-26
    Ram 88764HDX GM Performance Clutch Set, 11 x 1-1/8 Inch-26
    (Part #60588764)
    x
                

    The basic RAM concept of clutch performance is simple: Increased clamp pressure is the single most effective way to manage high horsepower or load, especially in street driven performance cars. RAM HDX pressure plates are purpose built with 30% more clamp pressure than stock. The second important feature is smooth, chatter free operation, which is achieved with premium organic composite disc friction material. Also, HDX discs feature Ram's exclusive 8-spring hub assembly for added load capacity. HDX. Great driveability and control for power levels to 450 horsepower. Sets include pressure plate, disc, release bearing, and alignment tool.

    • HDX sets feature a heavy duty pressure plate with explosion resistant pressure ring, and a premium 8 spring clutch disc with HD facings. 
    • Release bearing and alignment tool are included where applicable
    • HDX sets are rated up to 450 RWHP
    • 11" Diaphragm x 1-1/8 Inch-26 Spline
    • GM style applications
  • Coker Tire 579786 BF Goodrich Redline Tire, 225/70R15
    Coker Tire 579786 BF Goodrich Redline Tire, 225/70R15
    (Part #579786)
    x
                

    Give your car classic but yet stylish good looks with these vintage Redline radial tires from Coker tire. They feature an all season tread design with poly/steel construction and a max load capacity of 1753@35PSI.

    • Modern radial tires, classic muscle car looks
    • 3/8" red line
    • Tubeless
    • 6.70" tread width
    • 9.00" section width
    • 27.40" diameter
    • S Speed rated (112 mph)
    • Recommended rim width: 6" - 8"

    Be sure to choose the correct tire by referring to our Speedy Tip; Tire Size Guide Chart. (PDF)

  • DEi 050360 Boom Mat Speaker Baffle, 5 X 7 Inch Oval
    DEi 050360 Boom Mat Speaker Baffle, 5 X 7 Inch Oval
    (Part #35650360)
    x
                Please view the product's page for more information
            
  • Demon Carb 1903 Street Demon 750 CFM 4 Bbl Carburetor, Ball Brnshd Alu
    Demon Carb 1903 Street Demon 750 CFM 4 Bbl Carburetor, Ball Brnshd Alu
    (Part #91012014)
    x
                Please view the product's page for more information
            
  • DEi 050370 Boom Mat Speaker Baffle, 6 X 8 Inch Oval
    DEi 050370 Boom Mat Speaker Baffle, 6 X 8 Inch Oval
    (Part #35650370)
    x
                Please view the product's page for more information
            
Goto Previous PagePrevious Page
1 2 3 4 5 ... 25