Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Filter

Page 1 of 50

Products

Muscle Car

Shop Muscle Cars At Speedway Motors

There is no denying that muscle cars are the hottest rides on the street right now. Speedway Motors has the high performance muscle car parts to take you back to the '60s and '70s! Whether you run a Chevy, Ford or Mopar, you can find the right stuff for it here! Similar to your muscle car, Speedway Motors leaves our competitors in the dust when it comes to prices and selection.

Featured Products
  • Clevite H-Series 1969-Up Small Block Chevy Rod Bearings
    New
    Clevite H-Series 1969-Up Small Block Chevy Rod Bearings
    (Part #757R663H)
    x
                Clevite's H-Series was developed primarily for use in NASCAR type racing, but  they are suitable for all types of competition engines. These sets are  specifically for 1969-Up 302-305-327-350 S/B Chevy "Large Journal" engine (with 2.100" rod  journals).
    • Use H-series bearings with crankshafts that have oversize fillets and where engines run in the medium to high RPM range.
    • H-Series bearings should be used if contact patterns obtained with P-series parts are too narrow. Contact pattern should ideally cover 2/3 to 3/4 of the bearing surface.
    • If you aren't sure which type of performance bearing to start with, the H-Series will be your best choice.
    • X001 has .001" extra bearing clearance

    H-Series Features (Link)
  • Red Line 80204 Water Wetter Coolant Additive
    Red Line 80204 Water Wetter Coolant Additive
    (Part #91015709)
    x
                

    Red Line Water Wetter Super Coolant additive is a unique wetting agent which reduces coolant temperatures by as much as 20° F. This is a liquid coolant treatment product which is designed to be added to solutions of antifreeze and water to help improve the heat transfer properties of glycol-based antifreeze. This liquid product can be used to provide rust and corrosion protection in plain water for racing engines, which provides much better heat transfer properties than glycol-based antifreeze. Improves the ability of coolant to wet heat transfer surfaces by 50%.

    • Reduces or eliminates bubbles that form on hot metal surfaces to reduce coolant temperatures by up to 20°
    • Superior heat transfer properties compared to glycol-based antifreeze
    • Compatible with new or used antifreeze (including DEX-COOL and long-life versions) to improve the heat transfer of ethylene and propylene glycol systems
    • Improves heat transfer and reduces cylinder head temperature
    • Designed for use with all modern aluminum, cast iron, copper, brass and bronze cooling systems
    • Cleans and lubricates water pump seals
    • Reduces cavitation and complexes with hard water to reduce scaling
    • Does not lower cooling system below the thermostatically-controlled temperature
    • 12 fl. oz. bottle treats 12-20 quarts

    Water Wetter Tech Info (PDF)

    Learn more about how cooling systems work with proper coolant mixture and additives by reading our tech article. Cooling System Principles.   

  • Wilwood 140-13398-R, Forged Dynalite Rear Parking Brake Kit Pro-Series
    Wilwood 140-13398-R, Forged Dynalite Rear Parking Brake Kit Pro-Series
    (Part #83514013398R)
    x
                

    This group of FDL Pro-Series rear disc kits provides a complete solution for popular muscle car rear axles that require a parking brake. Forged billet Dynalite four piston calipers, 12.19” one-piece drum/rotors, and high friction pads provide optimized and balanced braking for all types of custom performance street/strip and show machines. The neatly hidden internal shoe system provides a clean installation with superior static holding power for parking. Optional caliper finishes and rotor designs enable the builder to personalize the style and optimize brake performance for every individual application.

    • Rear End Axle: AMC
    • Axle Offset 2.6 Inches
    • Mount Type: Lug
    • Wheel Diameter: 15 Inches
    • Caliper: 120-6806-RD
      • Type: Forged Dynalite
      • Finish: Red Powder Coat
      • Piston Count: 4
      • Piston Type: Stainless
      • Mount Type: Lug
      • Brake Pad Compound: BP-10
    • Rotor: 160-7508
      • Type: Ultralite HP 32 & Hat
      • Style: Plain Face
      • Surface Finish: Plain
      • Material: Iron
      • Diameter: 12.19"
      • Width: .81"
      • Vane Count: 32 V
      • Design Type: ULHP

    Fits the following applications:

    • 1971-73 Javelin Disc Brake Spindle
    • 1974 Javelin Disc Brake Spindle, Bendix Calipers
    • 1974 Javelin Disc Brake Spindle, Kelsey Hayes Calipers
    • 1971-74 Javelin AMX Disc Brake Spindle
    • 1971-74 Javelin AMX Drum Brake Spindle

    Note: Brake Kits are designed to fit OE Factory Spindles. Contact Speedway Motors if you are not using a factory spindle.

    Assembly Instructions (PDF)

    Wheel Clearance Diagram (PDF)   

  • Lift Latch Lap Belt
    $24.99
    Product Rating: 4.65 Stars
    Lift Latch Lap Belt
    (Part #91072065)
    x
                Seat belts in six popular colors. Chrome lift latch with  standard belt.  Red, black, maroon, gray, dark blue, or tan.   Lap belts adjustable from 60" to 74". DOT approved. 

    Includes 1.5" long mounting bolts and hardware. These are 1-13/16" wide.
  • Straight 3/8 Inch-24 IFF to 1/8 Inch NPT Male Adapter
    Straight 3/8 Inch-24 IFF to 1/8 Inch NPT Male Adapter
    (Part #91031831)
    x
                

    Brass adapter.

    Straight 3/8"-24 IFF to 1/8" NPT Male Adapter

  • Speedway Chevy Universal Aluminum Radiators
    Speedway Chevy Universal Aluminum Radiators
    (Part #917347)
    x
                

    Speedway’s line of universal Chevy radiators makes it easy for budget-minded racers to get a professional-quality aluminum racing radiator. These high performance radiators feature furnace-brazed construction, two rows of large 1" aluminum tubes, billet filler necks and a maximum number of fins per inch for great heat transfer. They are not available with transmission coolers and they do not come with mounting brackets.

    These Chevy-style radiators have driver’s side upper inlets, passenger side lower outlets, and can be ordered in a variety of custom widths.

    • All-aluminum, furnace-brazed construction
    • No cheap epoxy glue or crimped in gaskets
    • Maximum amount of fins per inch allows greater heat transfer
    • Billet filler necks
    • Available in 22", 24", 28", or 31" widths (measurements include tanks)

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article, Radiator Cooling Performance.

  • 1310 Series Chevy to Chevy U-Joint
    1310 Series Chevy to Chevy U-Joint
    (Part #91048315)
    x
                High quality, heat treated forged steel replacement U-joints. Comes with outside retaining clips.
            
  • Speedway Weld-In Battery Box
    $19.99
    Product Rating: 4.59 Stars
    Speedway Weld-In Battery Box
    (Part #91666006)
    x
                Weld-in style 16 gauge steel battery box. Holds a 10-3/4" x 7" battery.
            

Filter

"Muscle Car" Page 1 of 50

Page 1 of 50

  • MSD 29711 Atomic LS Coil Covers - LS1, LS6, Black
    New
    MSD 29711 Atomic LS Coil Covers - LS1, LS6, Black
    (Part #54729711)
    x
                

     If you desire a clean and customized look to your engine compartment, our new Atomic LS coil covers are designed to fit over the valve covers and coil assemblies to effectively hide the coil packs and wiring. The cast aluminum covers align with the Atomic Smart Fuel Rail assemblies and provide a completely smooth contoured finish to the edge of the valve cover. The Atomic Coil Covers will work with OEM coils as well as MSD's Multiple Sparking Coils.

    • Fits over valve covers and coil assemblies
    • Smooth Contoured Finish
    • Works with OEM coils and MSD's Multiple Sparking Coils
    • Sold Individually
    • LS1, LS6

    Installation Instructions (PDF) 

  • System 1 Filtration Short Replacement Filter Element 4 Inch 45 Micron
    New
    System 1 Filtration Short Replacement Filter Element 4 Inch 45 Micron
    (Part #696100360)
    x
                

    By simply replacing and/or cleaning your filter elements regularly, you can avoid costly repairs to your fuel system and ensure peak engine performance. Check out this short 4 inch replacement element from System 1 Filtration.

    • Short 4" replacement element
    • 45 micron 
    • Sold Individually

     

  • Classic Instruments SN35T8 Fuel Sender Tube, 8 Inch, 240-33 OHM
    New
    Classic Instruments SN35T8 Fuel Sender Tube, 8 Inch, 240-33 OHM
    (Part #2751031)
    x
                Classic Instruments Tube Fuel Level Senders are perfect for  applications  where swing arm senders won't fit due to issues with  clearance. These  Tube Fuel Senders also provide a more accurate reading  than swing arm  senders. Compatible with both both gasoline and diesel  fuels. 
    • 240-33 OHM
    • 8 Inch Length 
    • Compatible with both gasoline and diesel
    • Compatible with fuels with up to 10 percent Ethanol
    • Designed to work with any classic fuel level gauge
  • OTB Gear 6500-R/L Finned Fuel Filter R/L
    New
    OTB Gear 6500-R/L Finned Fuel Filter R/L
    (Part #9106501)
    x
                Please view the product's page for more information
            
  • Painless Wiring 50302 6-Switch Fused Panel with Wiring and Hardware
    New
    Painless Wiring 50302 6-Switch Fused Panel with Wiring and Hardware
    (Part #91050302)
    x
                

    This heavy duty lightweight switch panel from Painless Performance is designed to mount to a roll bar using standard metal hose clamps. Lighted rocker switches are color coded for quick reference.  All of the circuits are individually fused and are easily accessible for quick testing and replacement. This kit comes complete with 18 ft. of TXL wire, using fully insulated terminals. Made in the USA!

    Installation Instructions (PDF) 

    The Kit Controls:

    • Start
    • Ignition
    • Fuel pump
    • Electric fan/water pump (Switch up position - fan on only / Switch middle position - all off / Switch down position - fan & water pump on)
    • Two accessories

     

     

  • Heidts SB-012 Sway Bar Bracket Kit for Tubular Full Lower Control Arms
    New
    Heidts SB-012 Sway Bar Bracket Kit for Tubular Full Lower Control Arms
    (Part #413012)
    x
                

    This stabilizer bar bracket kit from Heidts is for tubular full lower A-Arms. These brackets bolt onto the control arms for a quick and simple installation. These brackets will only work on strut-less style control arms designed for stock coil springs. They will not bolt onto a coil over type arm as most of those do not have a plate in the center of them to bolt anything onto them.

    • Steel Construction
    • Hardware Included
    • Sold as Kit
    • Natural Finish

    Installation Instructions (PDF)

     

  • Torque Converter, TH350, 3500+ RPM Stall 10 Inch
    New
    Torque Converter, TH350, 3500+ RPM Stall 10 Inch
    (Part #109617)
    x
                

    This 10" Torque Converter is designed for use in light cars where other stall converters may still be too "tight." This torque converter has a painted finish and is sold individually. 

    • 10" Converter
    • For GM TH350 transmission
    • 3500+ RPM stall
    • Sold Individually 

    To learn about how torque converters work and what to consider when purchasing one, check out our tech article. Choosing the Right Torque Converter. 

     

  • OTB Gear 4660 Orbit Cast Spun Aluminum Air Cleaner
    New
    OTB Gear 4660 Orbit Cast Spun Aluminum Air Cleaner
    (Part #9104660)
    x
                

    This Orbit cast heavy aluminum spun air cleaner from OTB Gear has a truly unique look. The spun shell can be painted or clear coated.

    • Polished casting countersunk into heavy wall satin aluminum spinning
    • Outer shell can be painted or clear coated
    • Washable permanent filter
    • Fits standard 5" four bbl. Carb
    • Diameter 12" - height 4-1/2" 
    • Made in the USA

     

  • MSD 2970  Atomic LS Coil Covers LS2, LS3, LS7, Red
    New
    MSD 2970 Atomic LS Coil Covers LS2, LS3, LS7, Red
    (Part #5472970)
    x
                

     If you desire a clean and customized look to your engine compartment, our new Atomic LS coil covers are designed to fit over the valve covers and coil assemblies to effectively hide the coil packs and wiring. The cast aluminum covers align with the Atomic Smart Fuel Rail assemblies and provide a completely smooth contoured finish to the edge of the valve cover. The Atomic Coil Covers will work with OEM coils as well as MSD's Multiple Sparking Coils.

    • Fits over valve covers and coil assemblies
    • Smooth Contoured Finish
    • Works with OEM coils and MSD's Multiple Sparking Coils
    • Sold Individually
    • LS2, LS3, LS7

    Installation Instructions (PDF) 

  • OTB Gear 6505 Smooth Fuel Filter, Satin, Right-to-Left Fuel Flow
    New
    OTB Gear 6505 Smooth Fuel Filter, Satin, Right-to-Left Fuel Flow
    (Part #9106505)
    x
                

    Finally there are fuel filters that are not only functional, but good looking as well! The OTB Gear smooth fuel filter is a permanent washable stainless mesh filter that will last a lifetime! Fuel flows right to left.  

    • Show quality
    • Right to left fuel flow
    • Permanent washable stainless filter 
    • Utilizes compact ORB/AN-6 fittings 
    • Compact, functional, good looking
    • Smooth Style
    • Made in USA

    Specs:

    • Very compact in size, the bowl is 2.4" in diameter
    • Total height and width are 4-1/4" and projection from surface is 3"
    • Inlet and outlet ports utilize ORB/AN-6 fittings to reduce the bulk of hose connections
    • Drilled for 5/16" mounting hardware - (not included)
    • 100 Micron

     

  • Fragola 231507 150 Degree Adapter Hose End Fitting, -6 AN to -8 AN
    New
    Fragola 231507 150 Degree Adapter Hose End Fitting, -6 AN to -8 AN
    (Part #617231507)
    x
                
    This 150 degree Fragola hose fitting adapter allows you to connect a -6 AN hose to a -8 AN female fitting. Constructed from a high quality aluminum and features a red/blue andodized finish for a product that both looks and performs great. Works with a stainless or nylon braided hose.
    • 150 Degree
    • Aluminum Construction
    • Red/Blue anodized finish
    • Adapts -6 AN hose to -8 AN female fitting
    • -8 AN female fitting inlet
    • -6 AN hose outlet
    • Works with stainless or nylon braided hose 
  • Lokar BDI-9138 Goolsby Edition 5 Gauge Dash Insert, 3-3/8 Inch, Engine Turned
    New
    Lokar BDI-9138 Goolsby Edition 5 Gauge Dash Insert, 3-3/8 Inch, Engine Turned
    (Part #491BDI9138)
    x
                

    The Goolsby Edition by Lokar Billet Aluminum Dash Insert accepts one 3-3/8” gauge and four 2-1/16” gauges. The through holes accommodate common aftermarket switches with a design that complements other products in the Goolsby Edition series.

    • Goolsby Edition
    • Engine Turned
    • Aluminum Dash Insert 3-3/8"
    • Polished
  • Clayton Machine TA-202 Elliptical Throttle Pedal
    New
    Clayton Machine TA-202 Elliptical Throttle Pedal
    (Part #231048)
    x
                

    This elliptical throttle pedal from Clayton Machine has drilled I-beam arms. It also features durable chrome plating that never requires polishing.

    • Drilled I-beam arms
    • Durable chrome plating (never needs polishing)
    • Molded rubber pad
    • Clean “inline” styling
    • Fully adjustable arm with a spring loaded pedal
    • Dimensions: 12” tall, 1.5” wide

     

  • Fragola 2245091-BL 45 Degree Adapter Hose End Fitting, -8 AN to -10 AN
    New
    Fragola 2245091-BL 45 Degree Adapter Hose End Fitting, -8 AN to -10 AN
    (Part #6172245091)
    x
                
    This black 45 degree Fragola hose fitting adapter allows you to connect a -8 AN hose to a -10 AN fitting. Fragola Pro Flow Hose Ends are constructed from high quality aluminum and feature an anodized finish for a product that both looks and performs great. Works with a steel braided hose.
    • Aluminum Construction
    • Black anodized finish   
    • 45 Degree 
    • Adapts -8 AN hose to -10 AN fitting   
    • -10 AN Fitting Inlet   
    • -8 AN Hose Outlet  
  • Edelbrock 2035 RPM Air-Gap Dual-Quad Intake Manifold/Carburetor Kit
    New
    Edelbrock 2035 RPM Air-Gap Dual-Quad Intake Manifold/Carburetor Kit
    (Part #3252035)
    x
                Please view the product's page for more information
            
  • Clayton Machine TA-206-GKA2 1970-81 Camaro/Firebird Throttle Pedal Assembly
    New
    Clayton Machine TA-206-GKA2 1970-81 Camaro/Firebird Throttle Pedal Assembly
    (Part #231063)
    x
                This throttle pedal cover kit from Clayton Machine fits your 1970-1981 Camaro and Firebird, as well as universal applications. It is fully adjustable and features molded rubber inserts, with a spring loaded gas pedal.
    • • Sold as a complete kit (Billet throttle assemblies and matching pedal covers)
    • • Grey anodized finish with machined highlights.
    • • Fits 1970-1981 Camaro & Firebird as well as universal applications
    • • Fully adjustable and feature molded rubber inserts, with a spring loaded gas pedal.
    • • Pedal covers require no drilling for installation
  • Classic Instruments SN35T11 Fuel Sender Tube, 11 Inch, 240-33 OHM
    New
    Classic Instruments SN35T11 Fuel Sender Tube, 11 Inch, 240-33 OHM
    (Part #2751034)
    x
                

    Classic Instruments Tube Fuel Level Senders are perfect for applications where swing arm senders won't fit due to issues with clearance. These Tube Fuel Senders also provide a more accurate reading than swing arm senders. Compatible with both both gasoline and diesel fuels.

    • 240-33 OHM
    • 11 Inch Length 
    • Compatible with both gasoline and diesel
    • Compatible with fuels with up to 10 percent Ethanol
  • Painless Wiring 50305 6-Switch Rocker Circuit Breaker Panel
    New
    Painless Wiring 50305 6-Switch Rocker Circuit Breaker Panel
    (Part #91050305)
    x
                

    Check out this 6-switch Rocker circuit breaker panel from Painless Performance. It features color coded lighted rocker switches, 18 feet of TXL wire, vibration resistant terminals and a black finish for reduced glare.

    • Features circuit breakers in place of standard fuses
    • Panel controls: Start, ignition, fuel pump, electric fan/water pump and 2 accessories
    • Made in the USA

    Assembly Instructions (PDF)

  • GT Performance 54-5717 GT3 Autocross II Pro-touring Wood Steering Wheel
    New
    GT Performance 54-5717 GT3 Autocross II Pro-touring Wood Steering Wheel
    (Part #910545717)
    x
                

    This GT3 Autocross II Pro-Touring wood steering wheel from GT Performance pays tribute to a timeless performance design and elevates it to the next level. GT Performance did this by featuring a special tiered spoke design with lightening holes and fastened using unique aircraft grade rivets. This wheel has a three-bolt mounting pattern and is interchangeable with any standard three bolt hub or horn button.

    • Aluminum spoke construction
    • Special tiered spoke design
    • Fastened using unique aircraft grade rivets
    • Genuine hand rubbed stained mahogany rim with sculpted finger grips and sealed with a polyurethane clear coat for a protected gloss finish
    • Modular construction design allows for removal of the grip for custom painting to match your vehicles interior perfectly
    • 3-bolt mounting pattern, can be used with any GT3 installation hubs and GT3 horn buttons
    • This 3-bolt mounting pattern is interchangeable with any standard 3-bolt hub or horn button
    • Diameter: 15″ Dish: 2″
    • Made in the USA

    Frequently Asked Questions (PDF)  

    GT3 Steering Wheel Hub Applications (PDF)

  • Edelbrock 20674 RPM Air-Gap Dual-Quad Intake Manifold/Carburetor Kit
    New
    Edelbrock 20674 RPM Air-Gap Dual-Quad Intake Manifold/Carburetor Kit
    (Part #32520674)
    x
                Please view the product's page for more information
            
Goto Previous PagePrevious Page
1 2 3 4 5 ... 50