Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Muscle Cars At Speedway Motors

There is no denying that muscle cars are the hottest rides on the street right now. Speedway Motors has the high performance muscle car parts to take you back to the '60s and '70s! Whether you run a Chevy, Ford or Mopar, you can find the right stuff for it here! Similar to your muscle car, Speedway Motors leaves our competitors in the dust when it comes to prices and selection.

Featured Products
Small Block Chevy 4340 Steel H-Beam Rods, Bushed Pin
Small Block Chevy 4340 Steel H-Beam Rods, Bushed Pin
SKU-91015328
x
            

Heavy duty H-beam connecting rods for S/B Chevy. Full floating wrist pin in silicon bronze bushing. Precision bolt bushing to positively locate cap. Features 8640 PCE 7/16" cap screws.

Weight matched sets of 8. Available in 5.7" or 6.0" lengths.

Speedway Chevy Universal Aluminum Radiators
Speedway Chevy Universal Aluminum Radiators
SKU-917347
x
            

Speedway’s line of universal Chevy radiators makes it easy for budget-minded racers to get a professional-quality aluminum racing radiator. These high performance radiators feature furnace-brazed construction, two rows of large 1" aluminum tubes, billet filler necks and a maximum number of fins per inch for great heat transfer. They are not available with transmission coolers and they do not come with mounting brackets.

These Chevy-style radiators have driver’s side upper inlets, passenger side lower outlets, and can be ordered in a variety of custom widths.

  • All-aluminum, furnace-brazed construction
  • No cheap epoxy glue or crimped in gaskets
  • Maximum amount of fins per inch allows greater heat transfer
  • Billet filler necks
  • Available in 22", 24", 28", or 31" widths (measurements include tanks)

Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article, Radiator Cooling Performance.

1978-Up GM Metric Brake Calipers, IMCA Approved
1978-Up GM Metric Brake Calipers, IMCA Approved
SKU-91031045
x
            

These stock replacement single piston Metric calipers were standard equipment on 1978-88 GM mid-size cars (Cutlass, Grand Prix, Regals, Monte Carlo, etc.). They feature a 2.38" single piston, shielded bottom inlet, and will save 3-1/2 lbs. per side compared to mid-size 1969-1977 caliper.

 

  • IMCA approved
  • No core charge required
  • 7/16"-20 inlet
  • Can be used with brake hoses from Pre-1978 GM intermediate cars
  • Brake pads & bolts sold separately

 

Note: Does NOT include brake pads or slider bolts and bushings.

Ford 9 Inch Posi Traction Third Member Assembly
Ford 9 Inch Posi Traction Third Member Assembly
SKU-91048345
x
            

Speedway Motors now offers you a 9" Ford street 3rd member for your street rod. We reclaim genuine Ford 9" housings, clean, inspect and install all new components. All bearings, seals, 1310 series yoke and ring & pinion are new!

These Ford 9" 3rd member assemblies feature new Pro Gears ring & pinion, choice of 3.50, 3.70, 3.89, 4.11 or 4.56, Currie 9-Plus limited slip differential, 28 or 31 spline. Shipped in handy plastic carrying case. Assembled by professionals.

 

Currie Differential Tech Bulletin (PDF)

 

910-48345 Instructions (PDF)

Three Plain 9 Super 7 Carbs on 1957-86 SB Chevy Edelbrock Intake
Three Plain 9 Super 7 Carbs on 1957-86 SB Chevy Edelbrock Intake
SKU-9251220
x
            

This tri power kit uses the Edelbrock C-357-B S/B Chevy 3x2 intake with Speedway's 9 Super 7® carbs. It has progressive linkage to give you good driveability and economy, but power when you need it. The manifold has a balanced 180° firing order port runner arrangement. It contains an exhaust gas heat riser and offers excellent performance potential. (idle-5500 rpm)

Kit includes three carbs, the intake, air cleaners, linkage kit, fuel block, fittings and red fuel line. Assembly required. Fits 1957-1986 Chevy 262-400 c.i.d. small-block Chevys.

9 Super 7® Linkage Instructions (PDF)

Note: Not applicable to an HEI based distributor system due to a clearance issue. This system must be used in conjunction with a small diameter based distributor.

The 9Super7 Carb  makes setting up a multiple carburetor induction system easier than when Strombergs were available new. Our 3 Carb kits come with one primary carburetor and two secondary carburetors while the 2 Carb kits are both primary carbs.  See our Multiple Carburetor Tech Tip for more information on using the 9 Super 7 in a 2x2 or 3x2 carb set-up.

  • Three Deuce carburetor setups come with two "secondary" carbs for front and rear intake position and one "primary" carb for central/middle position
  • All-new tooling for crisp, flawless castings
  • New aluminum base assembly allows for cooler fuel temps and better fuel efficiency as compared to the original cast iron design
  • Stainless steel screws and hardware
  • Original troublesome needle and seat replaced by a Grose-style fuel inlet valve to better cope with higher fuel pressures and improved high speed running 
  • Will not stick or dribble like the old Viton-tipped needle and seat setups
  • Extended brass throttle shaft to simplify multi-carb linkage
  • Primary Carb - (1) Middle Position
    • Choke assembly, accelerator pump, and jets have all been faithfully retained and accept standard Stromberg parts
  • Secondary Carb - (2) Front and Rear Position
    • Special base plate with no idle circuits or choke linkage
    • Special butterflies and shafts installed
    • Works best with progressive linkage
    • Idle only off the center or main carburetor
    • No more plug foul

Note: The secondary carbs have NO choke, and they have NO idle system.

915-11655 Primary 9 Super 7 Carburetor Instructions (PDF)

Longacre 72702 Computerscales WIRELESS AccuSet II
Longacre 72702 Computerscales WIRELESS AccuSet II
SKU-47572701
x
            
Save yourself time with the II and its baseline memory recall. It will store your baseline setup so you can compare it to your current setup. It has 1 slot memory that is easy to use and very helpful. The display will show all 4 wheel weights plus the cross weight. The partial % will show with the push of one button. The display face is slanted for easier viewing.
  • Accuset II control box with ZigBee wireless receiver
  • Includes Free deluxe scale pad box
  • 4 wireless pads
  • No wires to trip over, no fragile modules outside the pad
  • 4 line display shows all weights and partial %
  • LMF Satin finished pads with single load cells
  • CNC machined 15" low profile scale pads with handles and recessed connectors
  • 1/10% accuracy and 1500 lbs per pad capacity
  • Two-year limited warranty
Speedway Universal 20 Circuit Wiring Harness
Speedway Universal 20 Circuit Wiring Harness
SKU-91064027
x
            Whether you're building an option loaded car or just want to have extra circuits available for future updates, this harness is perfect and makes any job painless. Compact 5-1/2"L x 4-1/2"W x 3-1/4"H  fuse block holds 18 standard push-in fuses and can be mounted almost anywhere. 

Each high temperature wire is color coded and labeled every six inches. Also includes GM type steering column connectors. To keep costs down and the quality high, this harness does not include any switches, light sockets or plugs that you would normally already have.

  • Harness has 20 circuits, of which 18 are fused
  • Taillight leads measure 17' long
  • Includes plug for GM column, headlight switch, dimmer switch, and signal flashers

Wiring Harness Installation Instructions (PDF)

Smoothie Rams Horn Exhaust Manifolds, Small Block Chevy, Raw
Smoothie Rams Horn Exhaust Manifolds, Small Block Chevy, Raw
SKU-9300329
x
            

These classic "Rams Horn" style exhaust manifolds are great for use with most small block Chevy applications, providing optimal clearance for angle plug heads.  These manifold kits come complete with all mounting hardware and gaskets.

  • Ground smooth with no external bosses or brackets
  • 2-1/2" outlet
  • Plain, Raw finish
  • Nodular cast iron
  • For angle or straight plug heads
  • Includes all hardware and gaskets

"Muscle Car" Page 1 of 25

  • MSD 29711 Atomic LS Coil Covers - LS1, LS6, Black
    New
    MSD 29711 Atomic LS Coil Covers - LS1, LS6, Black
    SKU-54729711
    x
                

     If you desire a clean and customized look to your engine compartment, our new Atomic LS coil covers are designed to fit over the valve covers and coil assemblies to effectively hide the coil packs and wiring. The cast aluminum covers align with the Atomic Smart Fuel Rail assemblies and provide a completely smooth contoured finish to the edge of the valve cover. The Atomic Coil Covers will work with OEM coils as well as MSD's Multiple Sparking Coils.

    • Fits over valve covers and coil assemblies
    • Smooth Contoured Finish
    • Works with OEM coils and MSD's Multiple Sparking Coils
    • Sold Individually
    • LS1, LS6

    Installation Instructions (PDF) 

  • GT Performance 21-1022 GT3 Chevy Bowtie Horn Button, Black Anodized
    New
    GT Performance 21-1022 GT3 Chevy Bowtie Horn Button, Black Anodized
    SKU-910211022
    x
                

    This colored Chevy Bowtie emblem horn button features a rich black anodized finish and will highlight any GT3 Wheel with style. GT3 Billet Horn Buttons are machined from 6061 Aluminum. It is secured using a unique “Sure-Lock” O-ring design on a billet base which ensures that your horn button won’t “pop off” in the middle of the night! GT3 style buttons are specifically designed for use with GT3 bolt pattern steering wheels. These are not recommended for flat or shallow dished wheels. This button is 3” in diameter and 1.5” high. These horn buttons have a three bolt mounting pattern and are interchangeable with any standard three bolt steering wheel.

    • Chevy Bowtie Color Emblem Horn Button
    • Machined from 6061 Aluminum
    • Black Anodized Finish
    • “Sure-Lock” O-ring design ensures your horn button won’t “pop off” in the middle of the night!
    • Button is 3" in Diameter and 1.5" high
    • GT3 horn button is interchangeable with any standard 3-bolt steering wheel
  • Wilwood 140-7140-DP FDL Rear Brake Kit, New Big Ford 2.50 Off
    New
    Wilwood 140-7140-DP FDL Rear Brake Kit, New Big Ford 2.50 Off
    SKU-8351407140DP
    x
                Please view the product's page for more information
            
  • Tanks Inc. TM34H-T EFI Fuel Tank Kit, 1971-72 Buick Skylark
    New
    Tanks Inc. TM34H-T EFI Fuel Tank Kit, 1971-72 Buick Skylark
    SKU-91076222
    x
                

    These all-inlcusive EFI Ready steel fuel tanks from Tanks Inc. take the headache out of converting your classic to modern LS power.  Each kit comes complete with a high-flow (255 liters p/hr) in-tank Walbro pump that supports up to 630 hp.  Also included are a sending unit, fill neck, and hose (if applicable).

    • 20 Gallon Capacity
    • Steel Construction
    • Powder Coated Finish
    • Sold Individually
    • Only offered with a GPA-4 pump

    Fits:

    • 1971-1972 Buick Skylark ,GS, GS 455
  • Coker Tire 633505 Firestone 2-3/4 Inch Whitewall Tire 450/475-16, Bias Ply
    New
    Coker Tire 633505 Firestone 2-3/4 Inch Whitewall Tire 450/475-16, Bias Ply
    SKU-633505
    x
                Give your car classic but yet stylish good looks with these vintage Whitewall bias ply tires from Coker tire. They feature authentic Firestone lettering embossed in the whitewalls and have a max load capacity of 660@30PSI.
    • Legendary Firestone Deluxe Champion quality and reliability
    • 2-3/4" Whitewall
    • Tube Type
    • 3.80" Tread Width
    • 4.75" section width
    • 26.20" diameter
    • DOT and ECE approved
    • Sold Individually

    Be sure to choose the correct tire by referring to our Speedy Tip; Tire Size Guide Chart. (PDF)

  • GT Performance 35-5457 GT3 Retro Wood Mustang Style Steering Wheel
    New
    GT Performance 35-5457 GT3 Retro Wood Mustang Style Steering Wheel
    SKU-910355457
    x
                Please view the product's page for more information
            
  • Wilwood 120-13529-BK Forged Dynalite-M Disc Brake Caliper, Black
    New
    Wilwood 120-13529-BK Forged Dynalite-M Disc Brake Caliper, Black
    SKU-83512013529BK
    x
                

    The Forged Billet Dynalite-M is specifically designed to enhance outboard clearance and is the basis for Wilwood’s new Classic Style brake kits. The latest applied developments and innovations in caliper design and manufacturing processes have resulted in substantial improvements in strength and performance over all comparable models.

    • Aluminum construction
    • Black Powder coat finish
    • 3.3 Pounds
    • Mount Center: 5.25 Inches
    • Mount Type: Lug
    • Mount Side: Universal
    • Type: Stainless
    • 4 Piston
    • Minimum Rotor Diameter: 10.00"
    • Maximum Rotor Diameter: 13.06"
    • Rotor Width: 1"
    • Piston Bore: 1.75"
    • Inlet Thread Size: 1/8-27 NPT
    • Strongest calipers in it's class, with weights starting at 2.80 pounds
  • 1964-1966 Ford Mustang Rear Sway Bar Kit, 1 Inch
    New
    1964-1966 Ford Mustang Rear Sway Bar Kit, 1 Inch
    SKU-113662
    x
                

    These rear sway bars are designed as a performance replacement upgrade for your classic Ford muscle car that came with a factory installed sway bar.  They feature a 1" diameter solid steel bar and come with all additional hardware needed for a successful installation.  If your classic Mustang came with an anti-sway bar from the factory, chances are this kit will be a direct replacement.  If originally equipped with a sway bar, the original hardware will need to be re-used, along with the additional supplied hardware.  These sway bar kits should only be used when the vehicle has a factory installed swaybar.

    • Achieve flatter cornering
    • Complements front sway bar to reduce understeer and gain more neutral handing
    • Adds to cornering stability at speed
    • Solid steel 1" diameter bar
    • Includes polyurethane bushings for increased responsiveness
    • Black powder coated finish
    • Corrosion resistant zinc plated hardware included

    Fits: (vehicles originally equipped with a sway bar)

    • 1964-1966 Ford Mustang, Mustang II, Mustang LX, GT
  • Painless Wiring 50302 6-Switch Fused Panel with Wiring and Hardware
    New
    Painless Wiring 50302 6-Switch Fused Panel with Wiring and Hardware
    SKU-91050302
    x
                

    This heavy duty lightweight switch panel from Painless Performance is designed to mount to a roll bar using standard metal hose clamps. Lighted rocker switches are color coded for quick reference.  All of the circuits are individually fused and are easily accessible for quick testing and replacement. This kit comes complete with 18 ft. of TXL wire, using fully insulated terminals. Made in the USA!

    Installation Instructions (PDF) 

    The Kit Controls:

    • Start
    • Ignition
    • Fuel pump
    • Electric fan/water pump (Switch up position - fan on only / Switch middle position - all off / Switch down position - fan & water pump on)
    • Two accessories

     

     

  • Heidts SB-012 Sway Bar Bracket Kit for Tubular Full Lower Control Arms
    New
    Heidts SB-012 Sway Bar Bracket Kit for Tubular Full Lower Control Arms
    SKU-413012
    x
                

    This stabilizer bar bracket kit from Heidts is for tubular full lower A-Arms. These brackets bolt onto the control arms for a quick and simple installation. These brackets will only work on strut-less style control arms designed for stock coil springs. They will not bolt onto a coil over type arm as most of those do not have a plate in the center of them to bolt anything onto them.

    • Steel Construction
    • Hardware Included
    • Sold as Kit
    • Natural Finish

    Installation Instructions (PDF)

     

  • Torque Converter, TH350, 3500+ RPM Stall 10 Inch
    New
    Torque Converter, TH350, 3500+ RPM Stall 10 Inch
    SKU-109617
    x
                

    This 10" Torque Converter is designed for use in light cars where other stall converters may still be too "tight." This torque converter has a painted finish and is sold individually. 

    • 10" Converter
    • For GM TH350 transmission
    • 3500+ RPM stall
    • Sold Individually 

    To learn about how torque converters work and what to consider when purchasing one, check out our tech article. Choosing the Right Torque Converter. 

     

  • GT Performance 11-1020 GT3 Standard "No Logo" Horn Button, Polished
    New
    GT Performance 11-1020 GT3 Standard "No Logo" Horn Button, Polished
    SKU-910111020
    x
                

    The “No Logo” plain black horn button allows you to add any decal or car logo (you supply) up to a 1-1/2" diameter. It features an elegant polished finish. GT3 Billet Horn Buttons are machined from 6061 aluminum. It is secured using a unique “Sure-Lock” O-ring design on a billet base which ensures that your horn button won’t “pop off” in the middle of the night! GT3 style buttons are specifically designed for use with GT3 bolt pattern steering wheels. These are not recommended for flat or shallow dished wheels (see GT3 Low Profile Horn Buttons). This button is 3” in diameter and 1.5” high. These horn buttons have a three bolt mounting pattern and are interchangeable with any standard three bolt steering wheel.

    • Customize any way you want! This horn button accepts any logo emblem up to 1.5" in diameter
    • Brilliant Polished Finish
    • Machined from 6061 Aluminum
    • “Sure-Lock” O-ring design ensures your horn button won’t “pop off” in the middle of the night!
    • Button is 3" in Diameter and 1.5" high
    • GT3 horn button is interchangeable with any standard 3-bolt steering wheel

     

  • MSD 2970  Atomic LS Coil Covers LS2, LS3, LS7, Red
    New
    MSD 2970 Atomic LS Coil Covers LS2, LS3, LS7, Red
    SKU-5472970
    x
                

     If you desire a clean and customized look to your engine compartment, our new Atomic LS coil covers are designed to fit over the valve covers and coil assemblies to effectively hide the coil packs and wiring. The cast aluminum covers align with the Atomic Smart Fuel Rail assemblies and provide a completely smooth contoured finish to the edge of the valve cover. The Atomic Coil Covers will work with OEM coils as well as MSD's Multiple Sparking Coils.

    • Fits over valve covers and coil assemblies
    • Smooth Contoured Finish
    • Works with OEM coils and MSD's Multiple Sparking Coils
    • Sold Individually
    • LS2, LS3, LS7

    Installation Instructions (PDF) 

  • Lokar BDI-9138 Goolsby Edition 5 Gauge Dash Insert, 3-3/8 Inch, Engine Turned
    New
    Lokar BDI-9138 Goolsby Edition 5 Gauge Dash Insert, 3-3/8 Inch, Engine Turned
    SKU-491BDI9138
    x
                

    The Goolsby Edition by Lokar Billet Aluminum Dash Insert accepts one 3-3/8” gauge and four 2-1/16” gauges. The though holes accommodate common aftermarket switches with a design that complements other products in the Goolsby Edition series.

    • Goolsby Edition
    • Engine Turned
    • Aluminum Dash Insert 3-3/8"
    • Polished
  • GT Performance 10-5502 GT9 GM Steering Wheel Adapter Hub, Polished
    New
    GT Performance 10-5502 GT9 GM Steering Wheel Adapter Hub, Polished
    SKU-910105502
    x
                
    This GT9 GM adapter hub is designed for installing GT9-bolt pattern steering wheels. There are step by step illustrated instructions included for an easy assembly.
    • CNC machined from 6061 Aluminum
    • Designed for GT9-bolt pattern steering wheels
    • Polished
    • Grade 8 hardware
    • 9-bolt mounting pattern, can be used with and GT9 bolt steering wheels and 9-bolt aftermarket wheel

    Assembly Instructions (PDF)

    GT9 Steering Wheel Hub Applications (PDF) 

    Frequently Asked Questions (PDF) 

  • 1964-1972 GM A-Body Rear Sway Bar Kit, 7/8 Inch
    New
    1964-1972 GM A-Body Rear Sway Bar Kit, 7/8 Inch
    SKU-113692
    x
                

    These rear sway bars are designed as a performance replacement upgrade for your classic GM muscle car.  They feature a 7/8" diameter solid steel bar and come with all hardware needed for a successful installation. If your A-Body came with an anti-sway bar from the factory, chances are this kit will be a direct replacement. If it did not, a small amount of drilling will be required for installation of the sway bar kit.

    • Achieve flatter cornering
    • Complements front sway bar to reduce understeer and gain more neutral handing
    • Adds to cornering stability at speed
    • Solid steel 7/8" diameter bar
    • Includes polyurethane bushings for increased responsiveness
    • Black powder coated finish
    • Corrosion resistant zinc plated hardware included

    Fits:

    • 1964-1972 Buick Skylark (with O.E. replacement , rear only)
    • 1964-1977 Chevrolet Chevelle, Malibu and El Camino
    • 1964-1977 Oldsmobile Cutlass Supreme, F-85, 442 (with 883 or 709 front with O.E. replacement, rear only)

     

  • MSD 8961 MSD High Current Relay, SPST
    $26.99
    $29.99
    New
    MSD 8961 MSD High Current Relay, SPST
    SKU-5478961
    x
                MSDs High Current Relays are what you need to activate accessories that draw high current. These Relays are very reliable due to the fully automated manufacturing process and sophisticated coil winding procedure. The SPST High Current Relay is rated at 30 amps with an input voltage of 12 volts DC. The relay is ideal for use with the MSD RPM Activated Switch when 12 volts are responsible for activating a high current device such as a nitrous solenoid.The DPST relay is also rated at 30 amps with a 12 volt input voltage. This Relay is the best choice when 12 volts are required to activate multiple high current devices at the same time such as multiple stage nitrous solenoids.

    Installation Instructions (PDF)

  • GT Performance 21-1100 GT9 Plain Horn Button, Black Anodized
    New
    GT Performance 21-1100 GT9 Plain Horn Button, Black Anodized
    SKU-910211100
    x
                

    The plain (no logo) horn button features a rich black anodized finish. It can also be taken to an engraver to be customized. This smaller size diameter button shows the 9-bolt pattern for a high tech performance look. GT9 Billet Horn Buttons are machined from 6061 Aluminum and secured using a unique O-ring in a billet base. GT9 buttons are specifically designed for use with GT9 bolt pattern steering wheels. Mounts flush with the surface of the wheel. These horn buttons have a nine bolt mounting pattern and are interchangeable with any standard nine bolt steering wheel.

    • Plain (No Logo) Horn Button Can Be Custom Engraved
    • Black Anodized Finish
    • Machined from 6061 Aluminum
    • Secured Using “Sure-Lock” O-ring Design
    • Mounts Flush in Wheel. Shows 9-bolt pattern for high tech performance look
    • GT9 horn button is interchangeable with any standard 9-bolt steering wheel

     

  • Sway Bar End Link Kit, 5 Inch
    $11.99
    $18.99
    New
    Sway Bar End Link Kit, 5 Inch
    SKU-113016
    x
                

    These sway bar end link kits come with all necessary hardware for a successful installation. They are designed with durable polyurethane bushings and steel material so you know that you are getting a quality kit.

    • Sold as Kit
    • 5" bushing to bushing working length, 8" overall length
    • Polyurethane Bushings
    • Hardware Included

     


  • Edelbrock 2035 RPM Dual-Quad Manifold Carb Kit for 289-302 Ford
    New
    Edelbrock 2035 RPM Dual-Quad Manifold Carb Kit for 289-302 Ford
    SKU-3252035
    x
                Please view the product's page for more information
            
  • Clayton Machine TA-206-GKA2 1970-81 Camaro/Firebird Throttle Pedal Assembly
    New
    Clayton Machine TA-206-GKA2 1970-81 Camaro/Firebird Throttle Pedal Assembly
    SKU-231063
    x
                This throttle pedal cover kit from Clayton Machine fits your 1970-1981 Camaro and Firebird, as well as universal applications. It is fully adjustable and features molded rubber inserts, with a spring loaded gas pedal.
    • • Sold as a complete kit (Billet throttle assemblies and matching pedal covers)
    • • Grey anodized finish with machined highlights.
    • • Fits 1970-1981 Camaro & Firebird as well as universal applications
    • • Fully adjustable and feature molded rubber inserts, with a spring loaded gas pedal.
    • • Pedal covers require no drilling for installation
  • Edelbrock 20674 RPM Dual-Quad Manifold Carb Kit for 348/409 W-Series Chevy
    New
    Edelbrock 20674 RPM Dual-Quad Manifold Carb Kit for 348/409 W-Series Chevy
    SKU-32520674
    x
                Please view the product's page for more information
            
  • Painless 70956 1/8 Inch ClassicBraid Wire Sleeving, 20 Feet
    New
    Painless 70956 1/8 Inch ClassicBraid Wire Sleeving, 20 Feet
    SKU-91070956
    x
                

    This ClassicBraid has a smooth texture and appearance that will transform your engine bay and give you that factory installed look. Its tight woven construction gives you an excellent blockade against mud and dirt while keeping adequate drainage for optimum wiring protection. 

    • Made in the USA
    • Continuous Temperature Rating -94° to 257°F
    • Melting Point 482°F
    • Resistant to Automotive Chemicals & Fluids
    • Great For Auto, Marine, RV, Aircraft, Power Sports, & More
    • 20' long
  • Classic Instruments SN23 Oil Temperature Sender, 1/4 Inch NPT
    New
    Classic Instruments SN23 Oil Temperature Sender, 1/4 Inch NPT
    SKU-275223
    x
                

    Classic Instruments either build it better or they don't build it. Each one of their oil temp senders is designed, assembled, and calibrated with quality and pride. Each product is made in the USA and designed for street rods by street rodders!

    • 1/4" NPT
    • Brass Construction
    • Sold Individually
    • Made in USA!
  • Classic Instruments SN22 Oil Temperature Sender, 1/8 Inch NPT
    New
    Classic Instruments SN22 Oil Temperature Sender, 1/8 Inch NPT
    SKU-275224
    x
                

    Classic Instruments either build it better or they don't build it. Each one of their oil temp senders is designed, assembled, and calibrated with quality and pride. Each product is made in the USA and designed for street rods by street rodders!

    • 1/8" NPT
    • Brass Construction
    • Sold Individually
    • Made in USA!
  • Painless Wiring 70923 PowerBraid Kit, 1970-81 2nd Generation Camaro
    New
    Painless Wiring 70923 PowerBraid Kit, 1970-81 2nd Generation Camaro
    SKU-91070923
    x
                Please view the product's page for more information
            
  • Lokar MSL622D Goolsby Edition Alum Borg Warner T5, T45, T56 Shift Lever 10 Inch
    New
    Lokar MSL622D Goolsby Edition Alum Borg Warner T5, T45, T56 Shift Lever 10 Inch
    SKU-491MSL622D
    x
                

    The Goolsby Edition by Lokar Billet Aluminum Shift Lever is direct bolt on for the Tremec T5, T45, T56 and TKO Transmissions. The lever comes with a machined groove for boot attachment. All mounting hardware is included.

    • Billet Aluminum Construction
    • Goolsby Edition
    • All Mounting Hardware is Included
    • TKO 500-600
    • Black
  • 1955-1957 Chevy Nomad Wagon Rear Sway Bar Kit, 7/8 Inch
    New
    1955-1957 Chevy Nomad Wagon Rear Sway Bar Kit, 7/8 Inch
    SKU-1132345
    x
                

    These rear sway bar kits are designed as a performance replacement upgrade for your classic Chevy muscle car. They feature a 7/8" diameter solid steel bar and come with all hardware needed for a successful installation.

    • Achieve flatter cornering
    • Complements front sway bar to reduce understeer and gain more neutral handing
    • Adds to cornering stability at speed
    • Solid steel 7/8" diameter bar
    • Includes polyurethane bushings for increased responsiveness
    • Black powder coated finish
    • Corrosion resistant zinc plated hardware included

    Fits:

    • 1955-1957 Chevrolet Nomad Wagon

     

  • Coker Tire 643500 Firestone Bias Ply Blackwall Tire, 6.00-16
    New
    Coker Tire 643500 Firestone Bias Ply Blackwall Tire, 6.00-16
    SKU-643500
    x
                Give your car classic but yet stylish good looks with these vintage Firestone Blackwall bias ply tires from Coker tire. They feature authentic Firestone lettering embossed in the blackalls and have a max load capacity of 1400@32PSI.
    • Legendary Firestone Deluxe Champion quality and reliability
    • Tube Type
    • 4.63" Tread Width
    • 6.26" Section Width
    • 28.56" Diameter
    • DOT and ECE approved

    Be sure to choose the correct tire by referring to our Speedy Tip; Tire Size Guide Chart. (PDF)

  • Fragola 209108 Series 8000 Push-Lite Hose End, -8AN to -6AN, 90 Degree
    New
    Fragola 209108 Series 8000 Push-Lite Hose End, -8AN to -6AN, 90 Degree
    SKU-6172918
    x
                

    This blue 90 degree hose fitting adapter from Fragola allows you to connect a -6 AN hose to an -8 AN fitting. Fragola Performance Systems Series 8000 Push-Lite hose fittings are made from high quality material for performance and durability.

    • Aluminum Construction
    • 90 Degree
    • -8 AN Fitting Inlet
    • -6 AN Hose Outlet
    • Sold Individually
    • Blue

    To learn more about our AN fittings, be sure to check out our tech articles; Fasteners - Brake, AN and Pipe Thread Fittings  and
    How to Assemble Push-On Hose Ends

  • Motive Gear GT109028 Powertrax Grip Differential, 28 Spline, 9 In Ford
    New
    Motive Gear GT109028 Powertrax Grip Differential, 28 Spline, 9 In Ford
    SKU-910109028
    x
                
    Powertrax Grip Pro Traction Systems are the latest design in traction using 3 x 2 spiral gear technology for smooth, dependable operation that combines a limited-slip differential with the strength of a fully machined, forged steel case.

    Features:

    • Latest Posi-Trac Design
    • Uses 3 x 2 Spiral Gear Technology
    • Comes Fully Assembled
    • Delivers Progressive & Variable Traction
    • Allows You to Control How Much Traction is Applied
    • Housed in a Fully Machined, Forged Steel Case
    • Fits 28 spline 9" Ford
  • Wilwood 260-13618 Remote Flange Mount Master Cylinder Kit, 5/8 In Bore
    New
    Wilwood 260-13618 Remote Flange Mount Master Cylinder Kit, 5/8 In Bore
    SKU-83526013618
    x
                Please view the product's page for more information
            
  • Wilwood 260-13622 Remote Flange Mount Master Cylinder Kit, 1 In Bore
    New
    Wilwood 260-13622 Remote Flange Mount Master Cylinder Kit, 1 In Bore
    SKU-83526013622
    x
                Please view the product's page for more information
            
  • Clayton Machine EL-504 Ribbed-Elliptical Bezel Interior Door Handles
    New
    Clayton Machine EL-504 Ribbed-Elliptical Bezel Interior Door Handles
    SKU-231021
    x
                

    This durable Ribbed-Elliptical Bezel Handle from Clayton Machine has chrome plating and never needs polishing. It includes brushed aluminum and black bezel inserts.

    • Durable chrome plating (never needs polishing)
    • Includes brushed aluminum and black bezel inserts
    • Included inserts can be painted or upholstered
    • Sold as a Pair
  • Clayton Machine PT-203 Pro-Touring Window Cranks, 1949-Up Ford and GM
    New
    Clayton Machine PT-203 Pro-Touring Window Cranks, 1949-Up Ford and GM
    SKU-231041
    x
                

    These window cranks from Clayton Machine are powder coated with machined highlights. They fit GM and Ford, 1949 and newer.

    • Powder-coated with machined highlights
    • Triangular cut outs match other CMW muscle car accessories
    • Fits GM, Ford (1949 and newer)
    • Dimensions: 5.5” long
  • Edelbrock 2068 RPM Dual-Quad Manifold Carb Kit for Small Block Chevy LS1
    New
    Edelbrock 2068 RPM Dual-Quad Manifold Carb Kit for Small Block Chevy LS1
    SKU-3252068
    x
                Please view the product's page for more information
            
  • Wilwood 120-13529-RD Forged Dynalite-M Disc Brake Caliper, Red
    New
    Wilwood 120-13529-RD Forged Dynalite-M Disc Brake Caliper, Red
    SKU-83512013529RD
    x
                

    The Forged Billet Dynalite-M is further enhancement of the venerable Forged Dynalite series calipers. Specifically designed to enhance outboard clearance and is the basis for Wilwood’s new Classic Style brake kits. The latest applied developments and innovations in caliper design and manufacturing processes have resulted in substantial improvements in strength and performance over all comparable models.

    • Aluminum construction
    • Red Powder coat finish
    • 3.3 Pounds
    • Mount Center: 5.25 Inches
    • Mount Type: Lug
    • Mount Side: Universal
    • Type: Stainless
    • 4 Piston
    • Minimum Rotor Diameter: 10.00"
    • Maximum Rotor Diameter: 13.06"
    • Rotor Width: 1"
    • Piston Bore: 1.75"
    • Inlet Thread Size: 1/8-27 NPT
    • Strongest calipers in it's class, with weights starting at 2.80 pounds
  • Lokar BDI-9139 Goolsby Edition 5 Gauge Dash Insert, 3-3/8 In, Mother of Pearl
    New
    Lokar BDI-9139 Goolsby Edition 5 Gauge Dash Insert, 3-3/8 In, Mother of Pearl
    SKU-491BDI9139
    x
                

    The Goolsby Edition by Lokar Billet Aluminum Dash Insert accepts one 3-3/8” gauge and four 2-1/16” gauges. The though holes accommodate common aftermarket switches with a design that complements other products in the Goolsby Edition series.

    • Goolsby Edition
    • Mother of Pearl
    • Aluminum Dash Insert 3-3/8"
    • Polished
  • Clayton Machine BP-304 Ribbed Brake Pedal
    New
    Clayton Machine BP-304 Ribbed Brake Pedal
    SKU-231007
    x
                

    This ribbed designed brake pedal from Clayton Machine features a durable chrome plating that never needs polishing. This product is sold individually.

    • Durable chrome plating
    • Ribbed design
    • Includes ½-20 mounting stud and jam nut
    • Dimensions: 1.5” x 4”
  • Ram Clutches 03-004 Ford Clutch Disc Alignment Tool, 1-1/16-10 Inch
    New
    Ram Clutches 03-004 Ford Clutch Disc Alignment Tool, 1-1/16-10 Inch
    SKU-60503004
    x
                

    With RAM's 1040 steel alignment tools, you can now get perfect disc alignment for your clutch install without the inaccuracies of plastic alignment tools.  These tools are perfect for installations such as dual discs that are even more critical for proper setup.

    • 1-1/16" Input Shaft Diameter
    • Input Shaft Spline Count: 10
    • Steel Material Type
    • Sold Individually
Goto Previous PagePrevious Page
1 2 3 4 5 ... 25