Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Muscle Cars At Speedway Motors

There is no denying that muscle cars are the hottest rides on the street right now. Speedway Motors has the high performance muscle car parts to take you back to the '60s and '70s! Whether you run a Chevy, Ford or Mopar, you can find the right stuff for it here! Similar to your muscle car, Speedway Motors leaves our competitors in the dust when it comes to prices and selection.

Featured Products
Small Block Chevy 4340 Steel H-Beam Rods, Bushed Pin
Small Block Chevy 4340 Steel H-Beam Rods, Bushed Pin
x
            

Heavy duty H-beam connecting rods for S/B Chevy. Full floating wrist pin in silicon bronze bushing. Precision bolt bushing to positively locate cap. Features 8640 PCE 7/16" cap screws.

Weight matched sets of 8. Available in 5.7" or 6.0" lengths.

Speedway Chevy Universal Aluminum Radiators
Speedway Chevy Universal Aluminum Radiators
x
            

Speedway’s line of universal Chevy radiators makes it easy for budget-minded racers to get a professional-quality aluminum racing radiator. These high performance radiators feature furnace-brazed construction, two rows of large 1" aluminum tubes, billet filler necks and a maximum number of fins per inch for great heat transfer. They are not available with transmission coolers and they do not come with mounting brackets.

These Chevy-style radiators have driver’s side upper inlets, passenger side lower outlets, and can be ordered in a variety of custom widths.

  • All-aluminum, furnace-brazed construction
  • No cheap epoxy glue or crimped in gaskets
  • Maximum amount of fins per inch allows greater heat transfer
  • Billet filler necks
  • Available in 22", 24", 28", or 31" widths (measurements include tanks)

Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article, Radiator Cooling Performance.

1978-Up GM Metric Brake Calipers, IMCA Approved
1978-Up GM Metric Brake Calipers, IMCA Approved
x
            

These stock replacement single piston Metric calipers were standard equipment on 1978-88 GM mid-size cars (Cutlass, Grand Prix, Regals, Monte Carlo, etc.). They feature a 2.38" single piston, shielded bottom inlet, and will save 3-1/2 lbs. per side compared to mid-size 1969-1977 caliper.

 

  • IMCA approved
  • No core charge required
  • 7/16"-20 inlet
  • Can be used with brake hoses from Pre-1978 GM intermediate cars
  • Brake pads & bolts sold separately

 

Note: Does NOT include brake pads or slider bolts and bushings.

Ford 9 Inch Posi Traction Third Member Assembly
Ford 9 Inch Posi Traction Third Member Assembly
x
            

Speedway Motors now offers you a 9" Ford street 3rd member for your street rod. We reclaim genuine Ford 9" housings, clean, inspect and install all new components. All bearings, seals, 1310 series yoke and ring & pinion are new!

These Ford 9" 3rd member assemblies feature new Pro Gears ring & pinion, choice of 3.50, 3.70, 3.89, 4.11 or 4.56, Currie 9-Plus limited slip differential, 28 or 31 spline. Shipped in handy plastic carrying case. Assembled by professionals.

 

Currie Differential Tech Bulletin (PDF)

 

910-48345 Instructions (PDF)

Three Plain 9 Super 7   Carbs on 1957-86 Small Block Chevy Edelbrock Intake
Three Plain 9 Super 7 Carbs on 1957-86 Small Block Chevy Edelbrock Intake
x
            

This tri power kit uses the Edelbrock C-357-B S/B Chevy 3x2 intake with Speedway's 9 Super 7® carbs. It has progressive linkage to give you good driveability and economy, but power when you need it. The manifold has a balanced 180° firing order port runner arrangement. It contains an exhaust gas heat riser and offers excellent performance potential. (idle-5500 rpm)

Kit includes three carbs, the intake, air cleaners, linkage kit, fuel block, fittings and red fuel line. Assembly required. Fits 1957-1986 Chevy 262-400 c.i.d. small-block Chevys.

9 Super 7® Linkage Instructions (PDF)

Note: Not applicable to an HEI based distributor system due to a clearance issue. This system must be used in conjunction with a small diameter based distributor.

The 9Super7 Carb  makes setting up a multiple carburetor induction system easier than when Strombergs were available new. Our 3 Carb kits come with one primary carburetor and two secondary carburetors while the 2 Carb kits are both primary carbs.  See our Multiple Carburetor Tech Tip for more information on using the 9 Super 7 in a 2x2 or 3x2 carb set-up.

  • Three Deuce carburetor setups come with two "secondary" carbs for front and rear intake position and one "primary" carb for central/middle position
  • All-new tooling for crisp, flawless castings
  • New aluminum base assembly allows for cooler fuel temps and better fuel efficiency as compared to the original cast iron design
  • Stainless steel screws and hardware
  • Original troublesome needle and seat replaced by a Grose-style fuel inlet valve to better cope with higher fuel pressures and improved high speed running 
  • Will not stick or dribble like the old Viton-tipped needle and seat setups
  • Extended brass throttle shaft to simplify multi-carb linkage
  • Primary Carb - (1) Middle Position
    • Choke assembly, accelerator pump, and jets have all been faithfully retained and accept standard Stromberg parts
  • Secondary Carb - (2) Front and Rear Position
    • Special base plate with no idle circuits or choke linkage
    • Special butterflies and shafts installed
    • Works best with progressive linkage
    • Idle only off the center or main carburetor
    • No more plug foul

Note: The secondary carbs have NO choke, and they have NO idle system.

915-11655 Primary 9 Super 7 Carburetor Instructions (PDF)

Longacre 72702 Computerscales WIRELESS AccuSet II
Longacre 72702 Computerscales WIRELESS AccuSet II
x
            
Save yourself time with the II and its baseline memory recall. It will store your baseline setup so you can compare it to your current setup. It has 1 slot memory that is easy to use and very helpful. The display will show all 4 wheel weights plus the cross weight. The partial % will show with the push of one button. The display face is slanted for easier viewing.
  • Accuset II control box with ZigBee wireless receiver
  • Includes Free deluxe scale pad box
  • 4 wireless pads
  • No wires to trip over, no fragile modules outside the pad
  • 4 line display shows all weights and partial %
  • LMF Satin finished pads with single load cells
  • CNC machined 15" low profile scale pads with handles and recessed connectors
  • 1/10% accuracy and 1500 lbs per pad capacity
  • Two-year limited warranty
Speedway Universal 20 Circuit Wiring Harness
Speedway Universal 20 Circuit Wiring Harness
x
            Whether you're building an option loaded car or just want to have extra circuits available for future updates, this harness is perfect and makes any job painless. Compact 5-1/2"L x 4-1/2"W x 3-1/4"H  fuse block holds 18 standard push-in fuses and can be mounted almost anywhere. 

Each high temperature wire is color coded and labeled every six inches. Also includes GM type steering column connectors. To keep costs down and the quality high, this harness does not include any switches, light sockets or plugs that you would normally already have.

  • Harness has 20 circuits, of which 18 are fused
  • Taillight leads measure 17' long
  • Includes plug for GM column, headlight switch, dimmer switch, and signal flashers

Wiring Harness Installation Instructions (PDF)

Smoothie Rams Horn Exhaust Manifolds, Small Block Chevy, Raw
Smoothie Rams Horn Exhaust Manifolds, Small Block Chevy, Raw
x
            

These classic "Rams Horn" style exhaust manifolds are great for use with most small block Chevy applications, providing optimal clearance for angle plug heads.  These manifold kits come complete with all mounting hardware and gaskets.

  • Ground smooth with no external bosses or brackets
  • 2-1/2" outlet
  • Plain, Raw finish
  • Nodular cast iron
  • For angle or straight plug heads
  • Includes all hardware and gaskets

"Muscle Car" Page 1 of 25

  • Wilwood 120-13529-BK Forged Dynalite-M Disc Brake Caliper, Black
    New
    Wilwood 120-13529-BK Forged Dynalite-M Disc Brake Caliper, Black
    x
                

    The Forged Billet Dynalite-M is specifically designed to enhance outboard clearance and is the basis for Wilwood’s new Classic Style brake kits. The latest applied developments and innovations in caliper design and manufacturing processes have resulted in substantial improvements in strength and performance over all comparable models.

    • Aluminum construction
    • Black Powder coat finish
    • 3.3 Pounds
    • Mount Center: 5.25 Inches
    • Mount Type: Lug
    • Mount Side: Universal
    • Type: Stainless
    • 4 Piston
    • Minimum Rotor Diameter: 10.00"
    • Maximum Rotor Diameter: 13.06"
    • Rotor Width: 1"
    • Piston Bore: 1.75"
    • Inlet Thread Size: 1/8-27 NPT
    • Strongest calipers in it's class, with weights starting at 2.80 pounds
  • Powermaster 57297 GM 12SI 150 Amp Smooth Look Alternator, Black
    New
    Powermaster 57297 GM 12SI 150 Amp Smooth Look Alternator, Black
    x
                Please view the product's page for more information
            
  • XS Power 525 925 Billet Aluminum Battery Hold Down Kit
    New
    XS Power 525 925 Billet Aluminum Battery Hold Down Kit
    x
                
    These aluminum battery hold downs from XS Power can be used as a universal mount for a variety of applications. They come with all necessary hardware for a quick and easy installation.
    • Lightweight aluminum construction
    • Universal mount design
  • 1964-1972 GM A-Body Rear Sway Bar Kit, 7/8 Inch
    New
    1964-1972 GM A-Body Rear Sway Bar Kit, 7/8 Inch
    x
                

    These rear sway bars are designed as a performance replacement upgrade for your classic GM muscle car.  They feature a 7/8" diameter solid steel bar and come with all hardware needed for a successful installation. If your A-Body came with an anti-sway bar from the factory, chances are this kit will be a direct replacement. If it did not, a small amount of drilling will be required for installation of the sway bar kit.

    • Achieve flatter cornering
    • Complements front sway bar to reduce understeer and gain more neutral handing
    • Adds to cornering stability at speed
    • Solid steel 7/8" diameter bar
    • Includes polyurethane bushings for increased responsiveness
    • Black powder coated finish
    • Corrosion resistant zinc plated hardware included

    Fits:

    • 1964-1972 Buick Skylark (with O.E. replacement , rear only)
    • 1964-1977 Chevrolet Chevelle, Malibu and El Camino
    • 1964-1977 Oldsmobile Cutlass Supreme, F-85, 442 (with 883 or 709 front with O.E. replacement, rear only)

     

  • 1970-81 GM Rear Sway Bar Kit, 7/8 Inch
    New
    1970-81 GM Rear Sway Bar Kit, 7/8 Inch
    x
                

    These rear sway bar kits are designed as a performance replacement upgrade for your classic GM muscle car. They feature a 7/8" diameter solid steel bar and come with all hardware needed for a successful installation. If your Camaro/Firebird came with an anti-sway bar from the factory, chances are this kit will be a direct replacement. If it did not, a small amount of drilling will be required for installation of the sway bar kit.

    • Achieve flatter cornering
    • Complements front sway bar to reduce understeer and gain more neutral handing
    • Adds to cornering stability at speed
    • Solid steel 7/8" diameter bar
    • Includes polyurethane bushings for increased responsiveness
    • Black powder coated finish
    • Corrosion resistant zinc plated hardware included

    Fits:

    • 70-81 Chevrolet Camaro
    • 70-81 Pontiac Firebird, Trans Am
  • Sway Bar End Link Kit, 5 Inch
    $11.99
    $18.99
    New
    Sway Bar End Link Kit, 5 Inch
    x
                

    These sway bar end link kits come with all necessary hardware for a successful installation. They are designed with durable polyurethane bushings and steel material so you know that you are getting a quality kit.

    • Sold as Kit
    • 5" bushing to bushing working length, 8" overall length
    • Polyurethane Bushings
    • Hardware Included

     


  • EMPI 16-2059 Bullet Light Assembly, Convex Red, Each
    New
    EMPI 16-2059 Bullet Light Assembly, Convex Red, Each
    x
                

    EMPI Bullet lights feature a high power 12-Volt 50 watt halogen bulb with a mirror finish reflector. The compact (approximately 3-1/2" tall by 2-1/2" diameter) housing is made of precision machined aluminum.

    • Bullet Light w/ Red Lens
    • Precision machined aluminum housing
    • Mounts on flat or slightly rounded surfaces
    • Sold Each

  • LS Air Block Off Plate
    $9.99
    $14.99
    New
    LS Air Block Off Plate
    x
                

    These air block-off plates are intended for use on non-pollution controlled, off-road vehicles only.

    • For GM LS engines
    • Hardware and O-ring are included
    • Measures 1-1/2" center-to-center on bolt holes

     

  • Titan Tools 19436 8-Piece Air Hose Blow Gun Kit
    New
    Titan Tools 19436 8-Piece Air Hose Blow Gun Kit
    x
                

    This 8-piece air hose blow gun kit from Titan Tools comes with a blow gun handle as well as 7 tips to go along with it.  These kits feature 1/4" NPT female fittings.

    Kit includes:

    • (1) Blow gun
    • (1) Rubber tip
    • (1) Air screen tip
    • (1) Brass tip
    • (1) Safety tip
    • (1) Adjustable tip
    • (1) Nylon tip
    • (1) Safety booster tip
  • Titan Tools 12086 3 Piece 6 Inch Impact Grade Power Extension Bar Set
    New
    Titan Tools 12086 3 Piece 6 Inch Impact Grade Power Extension Bar Set
    x
                
    These 3-piece impact grade power extension bar sets work great for adapting larger or smaller sized sockets to be used with power drills and drivers.
    • Adapts sockets to power drills and drivers
    • Detent ball for secure socket retention
    • 1/4" shank
    • 6” Overall Length
    • Includes: 1/4”, 3/8”, and 1/2” Drive Extension Bar
  • 1955-1957 Chevy Nomad Wagon Rear Sway Bar Kit, 7/8 Inch
    New
    1955-1957 Chevy Nomad Wagon Rear Sway Bar Kit, 7/8 Inch
    x
                

    These rear sway bar kits are designed as a performance replacement upgrade for your classic Chevy muscle car. They feature a 7/8" diameter solid steel bar and come with all hardware needed for a successful installation.

    • Achieve flatter cornering
    • Complements front sway bar to reduce understeer and gain more neutral handing
    • Adds to cornering stability at speed
    • Solid steel 7/8" diameter bar
    • Includes polyurethane bushings for increased responsiveness
    • Black powder coated finish
    • Corrosion resistant zinc plated hardware included

    Fits:

    • 1955-1957 Chevrolet Nomad Wagon

     

  • Wilwood 260-13618 Compact Remote Flange Mount Master Cylinder Kit, 5/8 Inch Bore
    New
    Wilwood 260-13618 Compact Remote Flange Mount Master Cylinder Kit, 5/8 Inch Bore
    x
                Please view the product's page for more information
            
  • Wilwood 260-13622 Compact Remote Flange Mount Master Cylinder Kit, 1 Inch Bore
    New
    Wilwood 260-13622 Compact Remote Flange Mount Master Cylinder Kit, 1 Inch Bore
    x
                Please view the product's page for more information
            
  • Replacement 12 Volt Vintage Style Fog Light Bulb, Amber Lens
    New
    Replacement 12 Volt Vintage Style Fog Light Bulb, Amber Lens
    x
                

    These vintage style fog lights are replacement for our fog light assemblies (91130653, 91130654, 911364007, and 911364008).  They feature an amber lens, and are perfect for your vintage street rod or custom ride.

    • Replacement for our 12 volt fog light assemblies
    • Amber lens
    • Vintage Lens Pattern Design From the 1940's
    • Quartz Halogen with Replaceable H3 Bulb, 35 Watt

     

  • Wilwood 120-13529-RD Forged Dynalite-M Disc Brake Caliper, Red
    New
    Wilwood 120-13529-RD Forged Dynalite-M Disc Brake Caliper, Red
    x
                

    The Forged Billet Dynalite-M is further enhancement of the venerable Forged Dynalite series calipers. Specifically designed to enhance outboard clearance and is the basis for Wilwood’s new Classic Style brake kits. The latest applied developments and innovations in caliper design and manufacturing processes have resulted in substantial improvements in strength and performance over all comparable models.

    • Aluminum construction
    • Red Powder coat finish
    • 3.3 Pounds
    • Mount Center: 5.25 Inches
    • Mount Type: Lug
    • Mount Side: Universal
    • Type: Stainless
    • 4 Piston
    • Minimum Rotor Diameter: 10.00"
    • Maximum Rotor Diameter: 13.06"
    • Rotor Width: 1"
    • Piston Bore: 1.75"
    • Inlet Thread Size: 1/8-27 NPT
    • Strongest calipers in it's class, with weights starting at 2.80 pounds
  • Ram Clutches 03-004 Ford Clutch Disc Alignment Tool, Steel, 1-1/16-10 Inch
    New
    Ram Clutches 03-004 Ford Clutch Disc Alignment Tool, Steel, 1-1/16-10 Inch
    x
                

    With RAM's 1040 steel alignment tools, you can now get perfect disc alignment for your clutch install without the inaccuracies of plastic alignment tools.  These tools are perfect for installations such as dual discs that are even more critical for proper setup.

    • 1.06" Input Shaft Diameter
    • Input Shaft Spline Count: 10
    • Steel Material Type
    • Sold Individually
  • 1958-1964 GM Rear Sway Bar Kit, 1 Inch
    New
    1958-1964 GM Rear Sway Bar Kit, 1 Inch
    x
                

    These rear sway bar kits are designed as a performance replacement upgrade for your classic GM muscle car. They feature a 1" diameter solid steel bar and come with all hardware needed for a successful installation.

    • Achieve flatter cornering
    • Complements front sway bar to reduce understeer and gain more neutral handing
    • Adds to cornering stability at speed
    • Solid steel 1" diameter bar
    • Includes polyurethane bushings for increased responsiveness
    • Black powder coated finish
    • Corrosion resistant zinc plated hardware included

    Fits:

    • 1962-1965 Buick Riviera, Wildcat
    • 1958-1964 Chevrolet Full-Size and Wagon

     

  • Titan Tools 21092 19MM Non-Marring Deep Well Lug Nut Socket, 1/2 Inch Drive
    New
    Titan Tools 21092 19MM Non-Marring Deep Well Lug Nut Socket, 1/2 Inch Drive
    x
                

    These non-marring deep well lug nut sockets from Titan Tools are available with core and sleeve in a 19MM size.  They are for use with 1/2" drive ratchet wrenches.

    • Protects wheel from damage
    • 19MM / 1/2" drive
    • Non-Marring
    • Deep Well style
  • Seal for Spindle Mount Radir Wheels
    $4.99
    $9.99
    New
    Seal for Spindle Mount Radir Wheels
    x
                These are part of a spindle bearing and seal kit. They are an inner bearing seal designed for use with Ford spindle mount Radir wheels.   
    • Sold each
    • Inner Bearing Seal
    • Ford Spindle Mount-Radir Wheels
    • See also 706-1300 for kit with seals and bearings
  • Turn Signal Switch for Speedway Tilt Steering Columns
    New
    Turn Signal Switch for Speedway Tilt Steering Columns
    x
                

    This is a replacement turn signal switch assembly for Speedway tilt steering columns. It fits most GM '69-up and aftermarket tilt columns.

    Includes:

    • Complete pigtail
    • Hazard knob and spring
    • Adapter for earlier GM vehicle connection
  • G-Comp Suspension Replacement Bump Stops, Black
    New
    G-Comp Suspension Replacement Bump Stops, Black
    x
                

    These black polyurethane bump stops are replacement for Speedway G-Comp suspension components and packages.  Sold as a pair, they come with mounting stud bolt and nut included.

    • Replacement for G-Comp suspension
    • Black polyurethane
    • Sold as a pair
  • Ram Clutches 78125HD Heavy Duty Chevy Hydraulic Release Bearing Kit
    New
    Ram Clutches 78125HD Heavy Duty Chevy Hydraulic Release Bearing Kit
    x
                

    These hydraulic clutch release bearings are offered in new HD versions to offer the upmost in durability and long life over factory hydraulic systems. Full adjustability means easy setup with any aftermarket clutch, single or dual disc.

    • Compressed Length: 1.75"
    • Travel: .70"
    • Inlet Fitting: -3 AN
    • Sold Individually
  • Titan Tools 19424 Spot Spray Non-Aerosol Sprayer, Blue
    New
    Titan Tools 19424 Spot Spray Non-Aerosol Sprayer, Blue
    x
                
    These spot sprayers from Titan Tools are eco friendly and are not for use with paint or flammable propellants.  They feature a 1 quart capacity and are refillable.
    • 80-150 PSI operating pressure
    • Refillable
    • Not for use with paint products
    • Do not use with flammable propellants
    • Eco friendly
    • Blue powder coat finish
  • Powermaster PowerGEN 82155-2 90A 56-57 Ford T-Bird 12 V Generator, Blk
    New
    Powermaster PowerGEN 82155-2 90A 56-57 Ford T-Bird 12 V Generator, Blk
    x
                Please view the product's page for more information
            
  • Ram Clutches 03-001 GM Clutch Disc Alignment Tool, Steel, 1/8-10 Inch
    New
    Ram Clutches 03-001 GM Clutch Disc Alignment Tool, Steel, 1/8-10 Inch
    x
                

    With RAM's 1040 steel alignment tools, you can now get perfect disc alignment for your clutch install without the inaccuracies of plastic alignment.

    • Input Shaft Diameter: 1.13"
    • Input Shaft Spline Count: 10
    • Steel Material
    • Sold Individually
  • Titan Tools 15054 5.5MM Video Inspection Camera
    New
    Titan Tools 15054 5.5MM Video Inspection Camera
    x
                These video inspection cameras from Titan Tools feature a 3.5" full-color screen with 5x variable electronic zoom and a waterproof flexible probe.  These cameras allow for inspection in tight or hidden areas.
    • 3.5 in. TFT LCD (QVGA, 320 x 240) full-color screen
    • Built-in variable brightness LED camera lights
    • 5x variable electronic zoom
    • Waterproof flexible probe
    • Adjustable handle (0, 45, 80 degrees)
    • Changeable screen angle (0 to 90 degrees)
    • Instant video preview
    • NTSC/PAL video out
    • 180 degree image rotation
  • Stainless Steel Tear Drop 12 Volt Fog Light, Amber Lens
    New
    Stainless Steel Tear Drop 12 Volt Fog Light, Amber Lens
    x
                These tear drop style fog lights feature a beautiful stainless steel housing with  an Amber lens.  They also include adjustable mounting and a replaceable  H3 35 watt bulb, and are perfect for your vintage street rod or custom  ride. 
    • Stainless steel Housing With Universal Ball & Cup Adjustable Mounting
    • Quartz Halogen with Replaceable H3 Bulb, 35 Watt
  • AFCO 40027 2010-12 Camaro High Performance Suspension Package
    New
    AFCO 40027 2010-12 Camaro High Performance Suspension Package
    x
                
    • Two re-valveable coil-over struts
    • Two re-valveable coil-over shocks
    • Two front springs - 275 lb./in.
    • Two rear springs - 270 lb./in.
    • Kit as shipped puts your Camaro 1" lower than stock
    • Front and rear adjustable sway bars with bushings
    • Caster/camber plates for optimum front end geometry
    • Noise isolation for front and rear coil-overs
    • Four jounce bumpers
    • AFCO shock valving tuned for a high performance driving experience
    • AFCO high performance progressive coil springs on all four corners
    • Factory upper and lower shock mounts used for the rear suspension
    • Tightens suspension for interstate highway travel, while maintaining a quiet and comfortable ride
    • Quick steering response and less body roll/float due to improved sway bar technology
    • Full color installation manual
    • Front end alignment will be necessary after installation
  • Titan Tool 51505 3-Piece Stainless Steel, Brass, and Nylon Brush Set
    New
    Titan Tool 51505 3-Piece Stainless Steel, Brass, and Nylon Brush Set
    x
                

    These 3-piece brush sets include three different style brushes for use in your home, shop, or garage. 

    • Stainless steel, Brass, Nylon
    • Great for multi-purpose use
  • Short Finned Small Block Chevy Valve Covers w/Holes
    New
    Short Finned Small Block Chevy Valve Covers w/Holes
    x
                

    These valve covers not only look cool, they feature a short design and work with Small Block Chevy engines.  Finned with aluminum construction keeps these valve covers lightweight.

    • Short style
    • Finned design
    • Aluminum construction
    • Fits Small Block Chevy V8 engines
    • Includes hardware, baffles, and grommets
  • Rocket Racing Wheels Fire Wheel, 16 x 5, 5 on 4.5, 2.375 Inch Backspace
    New
    Rocket Racing Wheels Fire Wheel, 16 x 5, 5 on 4.5, 2.375 Inch Backspace
    x
                Please view the product's page for more information
            
  • Titan Tools 19450 Portable Sand Blaster
    New
    Titan Tools 19450 Portable Sand Blaster
    x
                

    This sand blaster from Titan Tools has a gravity feed for constant flow of blasting materials. It has a capacity of 50 pounds and an operating pressure of 90 psi.

    • Hopper aluminum blast gun 15 material hose
    • Air inlet: 1/4" NPT
    • Nozzle size: 3/16"
    • Minimum air requirement: 3.5 CFM at 50 psi
    • Compatible with any abrasive: silica, sand, steel, grit, glass beads, and pecan shells
  • FK Rod Ends ALJML3 10-32 LH Male Aluminum Heim Joints
    New
    FK Rod Ends ALJML3 10-32 LH Male Aluminum Heim Joints
    x
                
    FK Rod Ends offers this three piece male heim. The ball is made of 52100 steel that is heat treated and hard chrome plated. The body is made of aluminum and is hard anodized red. The race is heat treated steel alloy that has been zinc plated and chromate treated.
    • Aluminum 3 piece LH 10-32 heim male
    • Ball is 52100 steel, heat treated and hard chrome plated
    • Body is 7075-T6 aluminum, hard anodized red
    • Race is alloy steel, heat treated, zinc plated, chromate treated

    Applications: Clutch, brake, steering linkage, and suspension components on moderate horsepower applications.

    Assembly Tip: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    Standard Male Rod End Chart (JPG)

     

  • Wilwood 260-3278 Residual Pressure Valve with Fittings
    New
    Wilwood 260-3278 Residual Pressure Valve with Fittings
    x
                
    These in-line pressure valves retain a minimum brake line pressure to help eliminate excessive pedal travel in disc brake systems. Residual pressure valves are made from billet aluminum with 1/8" npt female threads for the inlet/outlet and color coded for easy identification. Ideal for drag racing, circle track, street rod and many off road applications.

    The two pound valve is used in disc brake applications where the master cylinder is mounted below the horizontal plane of the calipers and fluid drain back occurs from gravity and vibration, thereby causing excessive caliper piston retraction and a longer brake pedal stroke. The minimal two pound residual pressure prevents fluid from flowing back without causing the brakes to drag.

    • Inlet Size: 1/8-27 NPT
    • Inlet Fit: 3/8-24 IF Female
    • Outlet Size: 1/8-27 NPT 
    • Outlet Fit: 3/8-24 IF Female
    • Rate: 2 lbs.

    Instructions (PDF)

    Brake System Builder's Tip (Link)

    Learn more about the proper uses of residual valves by reading our tech article. Brake System Selection

  • 1977-1996 Full Size GM Front Sway Bar Kit, 1-1/8 Inch
    New
    1977-1996 Full Size GM Front Sway Bar Kit, 1-1/8 Inch
    x
                

    These front sway bar kits are designed as a performance replacement upgrade for your classic full-sized GM car. They feature a 1-1/8" diameter solid steel bar and come with all hardware needed for a successful installation.

    • Achieve flatter cornering
    • Complements rear sway bar to reduce understeer and gain more neutral handing
    • Adds to cornering stability at speed
    • Solid steel 1-1/8" diameter bar
    • Includes polyurethane bushings for increased responsiveness
    • Black powder coated finish
    • Corrosion resistant zinc plated hardware included

    Fits:

    • 1977-1996 Buick Full Size (RWD including Station Wagon)
    • 1977-1996 Cadillac Fleetwood, Coupe DeVille, Sedan DeVille (RWD)
    • 1977-1996 Chevrolet Full Size (Except Station Wagon) (Except Impala SS)
    • 1977-1997 Chevrolet Full Size Station Wagon
    • 1977-1985 Oldsmobile Full Size (RWD) Except Station Wagon
    • 1977-1994 Oldsmobile Full Size Station Wagon
    • 1977-1986 Pontiac Full Size (RWD Except Station Wagon)
    • 1977-1991 Pontiac Full Size Station Wagon

     

     

  • Replacement Bushings for Mustang II Upper Control Arms
    New
    Replacement Bushings for Mustang II Upper Control Arms
    x
                

    These are replacement bushings for our tubular, MII upper control arms. Bushings are constructed of quality rubber for durability.

    • Overall Length: 1.66"
    • Inside Diameter: .65"
    • Outside Diameter: 1.20"
    • Sold in pairs
  • Chrome Bullet Style Hub Covers, 5 on 5 Inch
    New
    Chrome Bullet Style Hub Covers, 5 on 5 Inch
    x
                

    These bullet hub/nut covers work great on most steel wheels to give you that cool retro look.  They feature chrome steel construction and are sold as a set of four.

    • Chrome plated steel
    • 5 on 5" bolt patterns
    • Sold as a set of (4)four
  • 1966-80 Ford Front Sway Bar Kit, 1 Inch
    New
    1966-80 Ford Front Sway Bar Kit, 1 Inch
    x
                

    These front sway bars are designed as a performance replacement upgrade for your classic Ford muscle car.  They feature a 1" diameter solid steel bar and come with all hardware needed for a successful installation.  If your Ford came with an anti-sway bar from the factory, chances are this kit will be a direct replacement.  If it did not, a small amount of drilling will be required for installation of the sway bar kit.

    • Achieve flatter cornering
    • Complements rear sway bar to reduce understeer and gain more neutral handing
    • Adds to cornering stability at speed
    • Solid steel 1" diameter bar
    • Includes polyurethane bushings for increased responsiveness
    • Black powder coated finish
    • Corrosion resistant zinc plated hardware included

    Fits:

    • 66-69 Ford Elite, Fairlane, Torino, LTD II
    • 66-70 Ford Falcon
    • 75-80 Ford Granada, Small LTD
    • 67-70 Ford Mustang, Mustang II, Mustang LX, GT
    • 66-69 Ford Ranchero
    • 66-70 Mercury Comet
    • 67-70 Mercury Cougar
    • 75-80 Mercury Monarch
    • 68-69 Mercury Montego
    • 78 Mercury Zepher, Downsized Marquis
  • Wilwood 160-13500 GT 48 Curved Vane Spec-37 LH Iron Rotor, 11.75 Inch
    New
    Wilwood 160-13500 GT 48 Curved Vane Spec-37 LH Iron Rotor, 11.75 Inch
    x
                

    Wilwood's GT 48 Curved Vane Spec-37 rotors are manufactured from a proprietary iron alloy developed to withstand extreme temperatures with the highest possible degree of resistance against distortion, warping, cracking, and wear. The formulation for this alloy is a derivative of technology and materials that were significant in the development of the extreme duty military spec rotors that are manufactured by Wilwood. Every Spec 37 rotor is precision machined to less than .001" run-out, flatness, and parallelism. Combined with the proven GT Series asymmetrical face slot pattern and individual dynamic balancing, you are assured the smoothest, vibration free performance at any speed. These rotors provide the highest cooling capacity and longest service life for extreme braking short tracks and road course competition.

    • Spec-37 Iron
    • 10.4 Pounds
    • Width: 1.21 Inch
    • Diameter: 11.75 Inch
    • Mount Side: LH
    • Vane Count: 48 CV
    • Type: GT
    • Style: GT Slotted
    • Surface Finish: Plain
    • Balanced
    • Suitable for high temperature racing to street use

    Notes:

    Proper Break-In Procedure for Steel or Cast Iron Rotors

    New steel/iron rotors should be bedded in before being used in racing conditions. Proper bedding will prepare the rotor surface, prolong the rotor's life, and make it more

  • 1968-1972 Chevelle Bucket Seat Adapter
    New
    1968-1972 Chevelle Bucket Seat Adapter
    x
                

    This bolt-in seat adapter from Scat is for your 1968-1972 Chevelle with factory bucket seats. Its custom steel design allows for an easy installation and are vehicle-specific to avoid time-consuming modifications. These seat adapters make it easy to be more comfortable, save money, and have the satisfication of doing the job yourself.

    • Hardware Included
    • Sold Individually
    • Choose Driver or Passenger Seat

     

Goto Previous PagePrevious Page
1 2 3 4 5 ... 25