Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Muscle Cars At Speedway Motors

There is no denying that muscle cars are the hottest rides on the street right now. Speedway Motors has the high performance muscle car parts to take you back to the '60s and '70s! Whether you run a Chevy, Ford or Mopar, you can find the right stuff for it here! Similar to your muscle car, Speedway Motors leaves our competitors in the dust when it comes to prices and selection.

Featured Products
Small Block Chevy 4340 Steel H-Beam Rods, Bushed Pin
Small Block Chevy 4340 Steel H-Beam Rods, Bushed Pin
x
            

Heavy duty H-beam connecting rods for S/B Chevy. Full floating wrist pin in silicon bronze bushing. Precision bolt bushing to positively locate cap. Features 8640 PCE 7/16" cap screws.

Weight matched sets of 8. Available in 5.7" or 6.0" lengths.

Speedway Chevy Universal Aluminum Radiators
Speedway Chevy Universal Aluminum Radiators
x
            

Speedway’s line of universal Chevy radiators makes it easy for budget-minded racers to get a professional-quality aluminum racing radiator. These high performance radiators feature furnace-brazed construction, two rows of large 1" aluminum tubes, billet filler necks and a maximum number of fins per inch for great heat transfer. They are not available with transmission coolers and they do not come with mounting brackets.

These Chevy-style radiators have driver’s side upper inlets, passenger side lower outlets, and can be ordered in a variety of custom widths.

  • All-aluminum, furnace-brazed construction
  • No cheap epoxy glue or crimped in gaskets
  • Maximum amount of fins per inch allows greater heat transfer
  • Billet filler necks
  • Available in 22", 24", 28", or 31" widths (measurements include tanks)

Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article, Radiator Cooling Performance.

1978-Up GM Metric Brake Calipers, IMCA Approved
1978-Up GM Metric Brake Calipers, IMCA Approved
x
            

These stock replacement single piston Metric calipers were standard equipment on 1978-88 GM mid-size cars (Cutlass, Grand Prix, Regals, Monte Carlo, etc.). They feature a 2.38" single piston, shielded bottom inlet, and will save 3-1/2 lbs. per side compared to mid-size 1969-1977 caliper.

 

  • IMCA approved
  • No core charge required
  • 7/16"-20 inlet
  • Can be used with brake hoses from Pre-1978 GM intermediate cars
  • Brake pads & bolts sold separately

 

Note: Does NOT include brake pads or slider bolts and bushings.

Ford 9 Inch Posi Traction Third Member Assembly
Ford 9 Inch Posi Traction Third Member Assembly
x
            

Speedway Motors now offers you a 9" Ford street 3rd member for your street rod. We reclaim genuine Ford 9" housings, clean, inspect and install all new components. All bearings, seals, 1310 series yoke and ring & pinion are new!

These Ford 9" 3rd member assemblies feature new Pro Gears ring & pinion, choice of 3.50, 3.70, 3.89, 4.11 or 4.56, Currie 9-Plus limited slip differential, 28 or 31 spline. Shipped in handy plastic carrying case. Assembled by professionals.

 

Currie Differential Tech Bulletin (PDF)

 

910-48345 Instructions (PDF)

Three Plain 9 Super 7   Carbs on 1957-86 Small Block Chevy Edelbrock Intake
Three Plain 9 Super 7 Carbs on 1957-86 Small Block Chevy Edelbrock Intake
x
            

This tri power kit uses the Edelbrock C-357-B S/B Chevy 3x2 intake with Speedway's 9 Super 7® carbs. It has progressive linkage to give you good driveability and economy, but power when you need it. The manifold has a balanced 180° firing order port runner arrangement. It contains an exhaust gas heat riser and offers excellent performance potential. (idle-5500 rpm)

Kit includes three carbs, the intake, air cleaners, linkage kit, fuel block, fittings and red fuel line. Assembly required. Fits 1957-1986 Chevy 262-400 c.i.d. small-block Chevys.

9 Super 7® Linkage Instructions (PDF)

Note: Not applicable to an HEI based distributor system due to a clearance issue. This system must be used in conjunction with a small diameter based distributor.

The 9Super7 Carb  makes setting up a multiple carburetor induction system easier than when Strombergs were available new. Our 3 Carb kits come with one primary carburetor and two secondary carburetors while the 2 Carb kits are both primary carbs.  See our Multiple Carburetor Tech Tip for more information on using the 9 Super 7 in a 2x2 or 3x2 carb set-up.

  • Three Deuce carburetor setups come with two "secondary" carbs for front and rear intake position and one "primary" carb for central/middle position
  • All-new tooling for crisp, flawless castings
  • New aluminum base assembly allows for cooler fuel temps and better fuel efficiency as compared to the original cast iron design
  • Stainless steel screws and hardware
  • Original troublesome needle and seat replaced by a Grose-style fuel inlet valve to better cope with higher fuel pressures and improved high speed running 
  • Will not stick or dribble like the old Viton-tipped needle and seat setups
  • Extended brass throttle shaft to simplify multi-carb linkage
  • Primary Carb - (1) Middle Position
    • Choke assembly, accelerator pump, and jets have all been faithfully retained and accept standard Stromberg parts
  • Secondary Carb - (2) Front and Rear Position
    • Special base plate with no idle circuits or choke linkage
    • Special butterflies and shafts installed
    • Works best with progressive linkage
    • Idle only off the center or main carburetor
    • No more plug foul

Note: The secondary carbs have NO choke, and they have NO idle system.

915-11655 Primary 9 Super 7 Carburetor Instructions (PDF)

Longacre 72702 Computerscales WIRELESS AccuSet II
Longacre 72702 Computerscales WIRELESS AccuSet II
x
            
Save yourself time with the II and its baseline memory recall. It will store your baseline setup so you can compare it to your current setup. It has 1 slot memory that is easy to use and very helpful. The display will show all 4 wheel weights plus the cross weight. The partial % will show with the push of one button. The display face is slanted for easier viewing.
  • Accuset II control box with ZigBee wireless receiver
  • Includes Free deluxe scale pad box
  • 4 wireless pads
  • No wires to trip over, no fragile modules outside the pad
  • 4 line display shows all weights and partial %
  • LMF Satin finished pads with single load cells
  • CNC machined 15" low profile scale pads with handles and recessed connectors
  • 1/10% accuracy and 1500 lbs per pad capacity
  • Two-year limited warranty
Speedway Universal 20 Circuit Wiring Harness
Speedway Universal 20 Circuit Wiring Harness
x
            Whether you're building an option loaded car or just want to have extra circuits available for future updates, this harness is perfect and makes any job painless. Compact 5-1/2"L x 4-1/2"W x 3-1/4"H  fuse block holds 18 standard push-in fuses and can be mounted almost anywhere. 

Each high temperature wire is color coded and labeled every six inches. Also includes GM type steering column connectors. To keep costs down and the quality high, this harness does not include any switches, light sockets or plugs that you would normally already have.

  • Harness has 20 circuits, of which 18 are fused
  • Taillight leads measure 17' long
  • Includes plug for GM column, headlight switch, dimmer switch, and signal flashers

Wiring Harness Installation Instructions (PDF)

Smoothie Rams Horn Exhaust Manifolds, Small Block Chevy, Raw
Smoothie Rams Horn Exhaust Manifolds, Small Block Chevy, Raw
x
            

These classic "Rams Horn" style exhaust manifolds are great for use with most small block Chevy applications, providing optimal clearance for angle plug heads.  These manifold kits come complete with all mounting hardware and gaskets.

  • Ground smooth with no external bosses or brackets
  • 2-1/2" outlet
  • Plain, Raw finish
  • Nodular cast iron
  • For angle or straight plug heads
  • Includes all hardware and gaskets

"Muscle Car" Page 1 of 25

  • MSD 31889 Red Super Conductor Ford 4.6L, 5.4L, Universal
    New
    MSD 31889 Red Super Conductor Ford 4.6L, 5.4L, Universal
    x
                The MSD 8.5mm Super Conductor Wire is "the" performance wire.Engineered from the inside out, the 8.5 offers everything you have everwanted in a wire; incredibly low resistance without electronic interference! In a single 12 inch length of Super Conductor Wire there is only 40 - 50 ohms of resistance! That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it's great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference (EMI) "choke". This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. The MSD 8.5mm Super Conductor Plug Wire is available in Universal Kits and Bulk Lengths.

    Installation Instructions (PDF)

    • 40-50 Ohms per foot of resistance!
  • MSD 8732 2-Step Rev Control for Digital 6AL
    New
    MSD 8732 2-Step Rev Control for Digital 6AL
    x
                Since the new Digital 6AL Ignition uses rotary dials to adjust the rev limiter, our engineers were tasked with developing a 2-Step Rev Control that could be added to give racers the ability to switch to a low rpm limit to use on the starting line.    The new 2-Step is also digitally controlled and connects to the Digital 6ALs gray tach output wire. There are two easy to read rotary dials that let you set the launch rpm in 100 rpm increments. There is an activation wire that connects to the transbrake, a clutch switch or to the line-lock to activate the low rpm limit. When that switch is released, the low rpm limit is turned off and the car launches hard!

    Installation Instructions (PDF)

    • For use with Digital 6AL PN 6425 only
  • MSD 32939 Super Conductor Plug Wires, 98-01 Ford ZX-2, 2.0L, 4 cyl
    New
    MSD 32939 Super Conductor Plug Wires, 98-01 Ford ZX-2, 2.0L, 4 cyl
    x
                Please view the product's page for more information
            
  • MSD 8248 Blaster Coil 5.0L Coyote
    New
    MSD 8248 Blaster Coil 5.0L Coyote
    x
                The all new Ford 5.0L Coyote engine is hot, but MSD now offers a coil that will make it even hotter! MSD developed a replacement coil that incorporates improved windings and material to increase the output of the coil. Also, when other modifications are being added, you can rely on the Blaster Coil to recover quicker through high rpm with a powerful spark to promote combustion.
    • Improved high rpm operation
    • Patented winding design and materials
    • Direct bolt-in to factory connectors
    • 3.33402777777778
    • .51 ohms
    • Intnal Diode
    • 1.9 mH
    • 100 mA
    • 120 us
    • 48 mj
    • 32KV
  • MSD 32709 Super Conductor Plug Wires, Diamante, GT3000 Turbo V6 92-96
    New
    MSD 32709 Super Conductor Plug Wires, Diamante, GT3000 Turbo V6 92-96
    x
                Please view the product's page for more information
            
  • MSD 5561 Street-Fire Wire Set Chevy 366-454 Socket
    New
    MSD 5561 Street-Fire Wire Set Chevy 366-454 Socket
    x
                The Street Fire Spark Plug Wires feature a low resistance conductor thats wrapped in a sleek and durable black sleeve. The terminals are covered in black boots that protect the conductor from engine heat to ensure spark delivery.
    • Helically wound conductor suppresses electro and radio noise
    • Kevlar core combination for great strength and durability
    • Heavy duty terminals for secure connection
    • 8mm silicone and synthetic jacket resists heat and abrasion
    • 500 Ohms per foot resistance for improved spark delivery and power
    • Silicone boots protect against high exhaust temps
  • Wilwood 120-13529-BK Forged Dynalite-M Disc Brake Caliper, Black
    New
    Wilwood 120-13529-BK Forged Dynalite-M Disc Brake Caliper, Black
    x
                

    The Forged Billet Dynalite-M is specifically designed to enhance outboard clearance and is the basis for Wilwood’s new Classic Style brake kits. The latest applied developments and innovations in caliper design and manufacturing processes have resulted in substantial improvements in strength and performance over all comparable models.

    • Aluminum construction
    • Black Powder coat finish
    • 3.3 Pounds
    • Mount Center: 5.25 Inches
    • Mount Type: Lug
    • Mount Side: Universal
    • Type: Stainless
    • 4 Piston
    • Minimum Rotor Diameter: 10.00"
    • Maximum Rotor Diameter: 13.06"
    • Rotor Width: 1"
    • Piston Bore: 1.75"
    • Inlet Thread Size: 1/8-27 NPT
    • Strongest calipers in it's class, with weights starting at 2.80 pounds
  • MSD 8581 Ford 351C-460 Bronze Distributor Gear
    New
    MSD 8581 Ford 351C-460 Bronze Distributor Gear
    x
                MSD Bronze Distributor gears are machined from quality AMPCO 45 aluminum bronze containing 5% nickel. This special com�bination creates high-strength gear teeth that are less prone to wear even with high-volume oil pumps.

    Installation Instructions (PDF)

    • Increased outer hardened layer thickness (RC 55-60).
    • Micro polished surface for smooth contact.
    • Proprietary formulated ductile iron.
    • Melonite QPQ coated reduces friction and initial wear.
    • Interstitial carbide concentration improves wear resistance and
  • MSD 31223 Black Super Conductor 8 Cyl, 90 Deg Plug, 90 Deg Plug
    New
    MSD 31223 Black Super Conductor 8 Cyl, 90 Deg Plug, 90 Deg Plug
    x
                The MSD 8.5mm Super Conductor Wire is "the" performance wire.Engineered from the inside out, the 8.5 offers everything you have everwanted in a wire; incredibly low resistance without electronic interference! In a single 12 inch length of Super Conductor Wire there is only 40 - 50 ohms of resistance! That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it's great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference (EMI) "choke". This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. The MSD 8.5mm Super Conductor Plug Wire is available in Universal Kits and Bulk Lengths.

    Installation Instructions (PDF)

    • 1964-1966 Ford Mustang Rear Sway Bar Kit, 1 Inch
      New
      1964-1966 Ford Mustang Rear Sway Bar Kit, 1 Inch
      x
                  

      These rear sway bars are designed as a performance replacement upgrade for your classic Ford muscle car that came with a factory installed sway bar.  They feature a 1" diameter solid steel bar and come with all additional hardware needed for a successful installation.  If your classic Mustang came with an anti-sway bar from the factory, chances are this kit will be a direct replacement.  If originally equipped with a sway bar, the original hardware will need to be re-used, along with the additional supplied hardware.  These sway bar kits should only be used when the vehicle has a factory installed swaybar.

      • Achieve flatter cornering
      • Complements front sway bar to reduce understeer and gain more neutral handing
      • Adds to cornering stability at speed
      • Solid steel 1" diameter bar
      • Includes polyurethane bushings for increased responsiveness
      • Black powder coated finish
      • Corrosion resistant zinc plated hardware included

      Fits: (vehicles originally equipped with a sway bar)

      • 1964-1966 Ford Mustang, Mustang II, Mustang LX, GT
    • MSD 8183 2-Pin Deutsch Connector, 16 gauge
      New
      MSD 8183 2-Pin Deutsch Connector, 16 gauge
      x
                  There is absolutely no excuse for losing a race due to a poor wiring connection. MSDs Deutsch Connectors are sealed and lock together making them perfect for harsh racing applications. The compact housing of the connectors are molded from a durable plastic material that will not harden or crack. Each housing is indexed to prevent any chance of mismatching the ends plus they have a molded channel to secure another connector for a tidy appearance.The terminals grip to the wire with strong crimp tabs then lock into position inside the housing. The connections are protected with thick seals that will keep water, mud and debris away from the contacts. These terminals can handle more current than conventional connectors and do not require special tools. Supplied with terminals, seals and housings.

      Installation Instructions (PDF)

    • MSD 32279 Super Conductor Plug Wires Dodge, Chrys., Ply.,Mit. 2.0L DOHC
      New
      MSD 32279 Super Conductor Plug Wires Dodge, Chrys., Ply.,Mit. 2.0L DOHC
      x
                  The MSD 8.5mm Super Conductor Wire is "the" performance wire.Engineered from the inside out, the 8.5 offers everything you have everwanted in a wire; incredibly low resistance without electronic interference! In a single 12 inch length of Super Conductor Wire there is only 40 - 50 ohms of resistance! That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it's great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference (EMI) "choke". This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. The MSD 8.5mm Super Conductor Plug Wire is available in Universal Kits and Bulk Lengths.
      • MSD 34615 90deg. Spark Plug Terminals, 100 each
        New
        MSD 34615 90deg. Spark Plug Terminals, 100 each
        x
                    These spark plug terminals are what you need when you custom make your own sets. Available in 100 quanties.
        • MSD 8674 RPM Module Rev Limiter Selector Switch, 9000-11,200 RPM
          New
          MSD 8674 RPM Module Rev Limiter Selector Switch, 9000-11,200 RPM
          x
                      The RPM Module Selector plugs directly into the rpm module socket on all MSD Soft Touch Rev Controls and accessories that use plug-in mod­ules. The user can then select between twelve different rpm limits by simply turning the knob. Six models are available to cover a range from 3,000 rpm to 12,800 rpm in 200 rpm increments.

          Installation Instructions (PDF)

        • MSD 84049 Coil Wire for Blaster Coil, Socket Cap
          New
          MSD 84049 Coil Wire for Blaster Coil, Socket Cap
          x
                      Coil wire for use with Blaster Coil and Socket style cap.
                  
        • MSD 5571 Street-Fire Wire Set Chev Pickup, BB EFI, 90-97
          New
          MSD 5571 Street-Fire Wire Set Chev Pickup, BB EFI, 90-97
          x
                      The Street Fire Spark Plug Wires feature a low resistance conductor thats wrapped in a sleek and durable black sleeve. The terminals are covered in black boots that protect the conductor from engine heat to ensure spark delivery.
          • Helically wound conductor suppresses electro and radio noise
          • Kevlar core combination for great strength and durability
          • Heavy duty terminals for secure connection
          • 8mm silicone and synthetic jacket resists heat and abrasion
          • 500 Ohms per foot resistance for improved spark delivery and power
          • Silicone boots protect against high exhaust temps
        • MSD 8545 Chrysler 383,400 Pro-Billet Distributor
          New
          MSD 8545 Chrysler 383,400 Pro-Billet Distributor
          x
                      Since many Chrysler enthusiasts use the B1 head or aftermarket valve cov­ers, these Pro-Billet Chrysler Distributors have been designed with a small diameter housing. This allows the distributors to fit tight block and head combinations.

          Installation Instructions (PDF)

          • Smaller diameter CNC machined billet aluminum housing and billet aluminum base clears aftermarket heads and valve covers
          • Easy-to-adjust mechanical advance with supplied springs and stop bushings
          • Maintenance-free magnetic pickup and precision reluctor create stable trigger signals throughout the rpm range
          • Polished steel shaft is QPQ coated and guided by two sealed ball bearings
          • Advance plate and weights are fine blanked from chrome moly steel and QPQ coated for friction reduction
          • Mechanical advance assembly can be locked out for crank trigger systems
          • Advance weight pins are staked and tig welded to the plate
          • Nylon pads ensure smooth operation of the advance weights
          • Supplied with small diameter cap with HEI style terminals and race rotor (will accept 8441 Cap-A-Dapt)
          • Must be used with an MSD Ignition Control
          • No CARB Exemption Order Number
        • MSD 82488 Blaster Coil 5.0L Coyote Set of 8
          New
          MSD 82488 Blaster Coil 5.0L Coyote Set of 8
          x
                      

          The all new Ford 5.0L Coyote engine is hot, but MSD now offers a coil that will make it even hotter! MSD developed a replacement coil that incorporates improved windings and material to increase the output of the coil. Also, when other modifications are being added, you can rely on the Blaster Coil to recover quicker through high rpm with a powerful spark to promote combustion.

          MSD Rebate -  October 1, 2014 - October 31, 2014

          • Improved high rpm operation
          • Patented winding design and materials
          • Direct bolt-in to factory connectors
          • 3.33402777777778
          • .51 ohms
          • Intnal Diode
          • 1.9 mH
          • 100 mA
          • 120 us
          • 48 mj
          • 32KV
        • MSD 34033 Super Conductor Bulk Wire, Black 6Ft
          New
          MSD 34033 Super Conductor Bulk Wire, Black 6Ft
          x
                      Please view the product's page for more information
                  
        • 1964-1972 GM A-Body Rear Sway Bar Kit, 7/8 Inch
          New
          1964-1972 GM A-Body Rear Sway Bar Kit, 7/8 Inch
          x
                      

          These rear sway bars are designed as a performance replacement upgrade for your classic GM muscle car.  They feature a 7/8" diameter solid steel bar and come with all hardware needed for a successful installation. If your A-Body came with an anti-sway bar from the factory, chances are this kit will be a direct replacement. If it did not, a small amount of drilling will be required for installation of the sway bar kit.

          • Achieve flatter cornering
          • Complements front sway bar to reduce understeer and gain more neutral handing
          • Adds to cornering stability at speed
          • Solid steel 7/8" diameter bar
          • Includes polyurethane bushings for increased responsiveness
          • Black powder coated finish
          • Corrosion resistant zinc plated hardware included

          Fits:

          • 1964-1972 Buick Skylark (with O.E. replacement , rear only)
          • 1964-1977 Chevrolet Chevelle, Malibu and El Camino
          • 1964-1977 Oldsmobile Cutlass Supreme, F-85, 442 (with 883 or 709 front with O.E. replacement, rear only)

           

        • MSD 31369 Super Conductor Plug Wires Chevy 454, 74-76 HEI
          New
          MSD 31369 Super Conductor Plug Wires Chevy 454, 74-76 HEI
          x
                      The MSD 8.5mm Super Conductor Wire is "the" performance wire.Engineered from the inside out, the 8.5 offers everything you have everwanted in a wire; incredibly low resistance without electronic interference! In a single 12 inch length of Super Conductor Wire there is only 40 - 50 ohms of resistance! That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it's great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference (EMI) "choke". This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. The MSD 8.5mm Super Conductor Plug Wire is available in Universal Kits and Bulk Lengths.

          Installation Instructions (PDF)

          • MSD 8961 MSD High Current Relay, SPST
            $26.99
            $29.99
            New
            MSD 8961 MSD High Current Relay, SPST
            x
                        MSDs High Current Relays are what you need to activate accessories that draw high current. These Relays are very reliable due to the fully automated manufacturing process and sophisticated coil winding procedure. The SPST High Current Relay is rated at 30 amps with an input voltage of 12 volts DC. The relay is ideal for use with the MSD RPM Activated Switch when 12 volts are responsible for activating a high current device such as a nitrous solenoid.The DPST relay is also rated at 30 amps with a 12 volt input voltage. This Relay is the best choice when 12 volts are required to activate multiple high current devices at the same time such as multiple stage nitrous solenoids.

            Installation Instructions (PDF)

          • MSD 8489 Chevy Crab Cap Crank Trigger Distributor
            New
            MSD 8489 Chevy Crab Cap Crank Trigger Distributor
            x
                        Please view the product's page for more information
                    
          • MSD 34039 Super Conductor 8.5mm Wire, 6Ft Bulk
            New
            MSD 34039 Super Conductor 8.5mm Wire, 6Ft Bulk
            x
                        Please view the product's page for more information
                    
          • MSD 8190 10 Male Pins and Seals
            $8.99
            $9.99
            New
            MSD 8190 10 Male Pins and Seals
            x
                        Male pins and seals for use with Weathertight Connectors.
                    
          • MSD 31869 Super Conductor Plug Wires, Buick Grand Natl ,3.8L Distless
            New
            MSD 31869 Super Conductor Plug Wires, Buick Grand Natl ,3.8L Distless
            x
                        Please view the product's page for more information
                    
          • MSD 8431 Distributor Cap for PN 8570, 8545, 8546
            New
            MSD 8431 Distributor Cap for PN 8570, 8545, 8546
            x
                        MSD molds our most popular V8 distributor caps in-house. These caps are injection molded from DuPont® Rynite material and feature spark plug-style terminals. These terminals offer improved locking connections and the Rynite material is extremely strong wi
                    
          • Sway Bar End Link Kit, 5 Inch
            $11.99
            $18.99
            New
            Sway Bar End Link Kit, 5 Inch
            x
                        

            These sway bar end link kits come with all necessary hardware for a successful installation. They are designed with durable polyurethane bushings and steel material so you know that you are getting a quality kit.

            • Sold as Kit
            • 5" bushing to bushing working length, 8" overall length
            • Polyurethane Bushings
            • Hardware Included

             


          • MSD 8187 4-Pin Deutsch Connector, 12-14 gauge
            New
            MSD 8187 4-Pin Deutsch Connector, 12-14 gauge
            x
                        There is absolutely no excuse for losing a race due to a poor wiring connection. MSDs Deutsch Connectors are sealed and lock together making them perfect for harsh racing applications. The compact housing of the connectors are molded from a durable plastic material that will not harden or crack. Each housing is indexed to prevent any chance of mismatching the ends plus they have a molded channel to secure another connector for a tidy appearance.The terminals grip to the wire with strong crimp tabs then lock into position inside the housing. The connections are protected with thick seals that will keep water, mud and debris away from the contacts. These terminals can handle more current than conventional connectors and do not require special tools. Supplied with terminals, seals and housings.

            Installation Instructions (PDF)

            • Sealed Connectors
          • MSD 8184 2-Pin Deutsch Connector, 12-14 gauge
            New
            MSD 8184 2-Pin Deutsch Connector, 12-14 gauge
            x
                        There is absolutely no excuse for losing a race due to a poor wiring connection. MSDs Deutsch Connectors are sealed and lock together making them perfect for harsh racing applications. The compact housing of the connectors are molded from a durable plastic material that will not harden or crack. Each housing is indexed to prevent any chance of mismatching the ends plus they have a molded channel to secure another connector for a tidy appearance.The terminals grip to the wire with strong crimp tabs then lock into position inside the housing. The connections are protected with thick seals that will keep water, mud and debris away from the contacts. These terminals can handle more current than conventional connectors and do not require special tools. Supplied with terminals, seals and housings.

            Installation Instructions (PDF)

            • Waterproof
            • Quick Connect
          • MSD 88863 Harness, 6013 to Early Hemi 03-05
            New
            MSD 88863 Harness, 6013 to Early Hemi 03-05
            x
                        Chrysler used two different coil packs on the late model Hemi engines. For connections on a carbureted engine a Harness will be required. For EFI engines, the Harness and an Adapter will be required.
            • Use this harness to run a carbureted setup on an 03-05 Hemi
          • MSD 8910 Tach Adapter
            $42.99
            $50.99
            New
            MSD 8910 Tach Adapter
            x
                        If, after installing an MSD Ignition Control, your ta�chometer, fuel pump relay or electronic fuel injection (in foreign vehicles) doesnt operate correctly, your ap�plication may require a Tach Adapter. This is due to the trigger signal not being strong enough to trigger both the MSD and the factorys components.There are a few Tach Adapters available and for more information see pages 152 and 153. Each Adapter is simple to wire in and will have your MSD and vehicle firing away in no time! If you are triggering an MSD Blaster, 5, 6, SCI, or 7 Series Ignition with its white wire or points terminal, you will need the PN 8910 Tach Adapter. The PN 8910 will correct the operation of most voltage-triggered tachometers or fuel injection systems that do not work directly off the tach output terminal of the MSD Ignition Unit.

            Installation Instructions (PDF)

            Installation Instructions (PDF)

            • MSD 8889 Harness, MSD to 90-95 Dodge Ram 5.2, 5.9L
              New
              MSD 8889 Harness, MSD to 90-95 Dodge Ram 5.2, 5.9L
              x
                          The MSD-to-Dodge Coil Harness is designed to provide a splice-free and simple installation of an MSD Ignition Control to late model Dodge vehicles equipped with a coil

              Installation Instructions (PDF)

              • MSD 8950 RPM Activated Switch
                $92.99
                $119.99
                New
                MSD 8950 RPM Activated Switch
                x
                            These RPM-Activated Switches will perform a variety of different functions from turning on a bulb or solenoid to activating an MSD Timing Control at a desired rpm.The RPM-Activated Switch, PN 8950, has two activation wires; one to ground a circuit and the other to open a circuit. Simply plug in an rpm module and wire the Switch to the circuit you want to activate. When the engine rpm reaches that amount, the circuit is activated and will remain on until the rpm falls below that amount.The RPM Window Switch, PN 8956, has two rpm adjustments; one to activate a circuit, while the other deactivates the same circuit. This Switch will supply then remove ground to a circuit. This is a great feature to deactivate nitrous before the engines rev limit is reached. Both Switches can be used with stock inductive ignitions or an MSD Ignition and can handle up to 1.5 amps. No rpm modules are supplied so they must be ordered from the selection of Modules shown on page 124. For use on 4, 6, or 8-cylinder engines.

                Installation Instructions (PDF)

              • MSD 8456 Ford 5.0L Pro-Billet Distributor
                $269.99
                $390.99
                New
                MSD 8456 Ford 5.0L Pro-Billet Distributor
                x
                            Please view the product's page for more information
                        
              • MSD 8528 Pontiac V8 Ready to Run Distributor
                New
                MSD 8528 Pontiac V8 Ready to Run Distributor
                x
                            Please view the product's page for more information
                        
              • MSD 30829 Super Conductor Plug Wires,BB Chevy, With 8541 Crab Cap
                New
                MSD 30829 Super Conductor Plug Wires,BB Chevy, With 8541 Crab Cap
                x
                            Please view the product's page for more information
                        
              • MSD 8676 Selector Switch, 0 Deg-11 Deg
                $63.99
                $79.99
                New
                MSD 8676 Selector Switch, 0 Deg-11 Deg
                x
                            The Retard Module Selectors allow you to select between 12 retard amounts with the turn of a dial. The Selectors plug into the retard module receptacle of any MSD Timing Controls.

                Installation Instructions (PDF)

                • LS Air Block Off Plate
                  $9.99
                  $14.99
                  New
                  LS Air Block Off Plate
                  x
                              

                  These air block-off plates are intended for use on non-pollution controlled, off-road vehicles only.

                  • For GM LS engines
                  • Hardware and Gasket are included
                  • Measures 1-1/2" center-to-center on bolt holes

                   

                • MSD 31383 Black Super Conductor Ford 351C-400, Socket
                  New
                  MSD 31383 Black Super Conductor Ford 351C-400, Socket
                  x
                              The MSD 8.5mm Super Conductor Wire is "the" performance wire.Engineered from the inside out, the 8.5 offers everything you have everwanted in a wire; incredibly low resistance without electronic interference! In a single 12 inch length of Super Conductor Wire there is only 40 - 50 ohms of resistance! That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it's great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference (EMI) "choke". This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. The MSD 8.5mm Super Conductor Plug Wire is available in Universal Kits and Bulk Lengths.

                  Installation Instructions (PDF)

                  Goto Previous PagePrevious Page
                  1 2 3 4 5 ... 25