Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Muscle Cars At Speedway Motors

There is no denying that muscle cars are the hottest rides on the street right now. Speedway Motors has the high performance muscle car parts to take you back to the '60s and '70s! Whether you run a Chevy, Ford or Mopar, you can find the right stuff for it here! Similar to your muscle car, Speedway Motors leaves our competitors in the dust when it comes to prices and selection.

Featured Products
Small Block Chevy 4340 Steel H-Beam Rods, Bushed Pin
Small Block Chevy 4340 Steel H-Beam Rods, Bushed Pin
SKU-91015328
x
            

Heavy duty H-beam connecting rods for S/B Chevy. Full floating wrist pin in silicon bronze bushing. Precision bolt bushing to positively locate cap. Features 8640 PCE 7/16" cap screws.

Weight matched sets of 8. Available in 5.7" or 6.0" lengths.

Speedway Chevy Universal Aluminum Radiators
Speedway Chevy Universal Aluminum Radiators
SKU-917347
x
            

Speedway’s line of universal Chevy radiators makes it easy for budget-minded racers to get a professional-quality aluminum racing radiator. These high performance radiators feature furnace-brazed construction, two rows of large 1" aluminum tubes, billet filler necks and a maximum number of fins per inch for great heat transfer. They are not available with transmission coolers and they do not come with mounting brackets.

These Chevy-style radiators have driver’s side upper inlets, passenger side lower outlets, and can be ordered in a variety of custom widths.

  • All-aluminum, furnace-brazed construction
  • No cheap epoxy glue or crimped in gaskets
  • Maximum amount of fins per inch allows greater heat transfer
  • Billet filler necks
  • Available in 22", 24", 28", or 31" widths (measurements include tanks)

Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article, Radiator Cooling Performance.

1978-Up GM Metric Brake Calipers, IMCA Approved
1978-Up GM Metric Brake Calipers, IMCA Approved
SKU-91031045
x
            

These stock replacement single piston Metric calipers were standard equipment on 1978-88 GM mid-size cars (Cutlass, Grand Prix, Regals, Monte Carlo, etc.). They feature a 2.38" single piston, shielded bottom inlet, and will save 3-1/2 lbs. per side compared to mid-size 1969-1977 caliper.

 

  • IMCA approved
  • No core charge required
  • 7/16"-20 inlet
  • Can be used with brake hoses from Pre-1978 GM intermediate cars
  • Brake pads & bolts sold separately

 

Note: Does NOT include brake pads or slider bolts and bushings.

Ford 9 Inch Posi Traction Third Member Assembly
Ford 9 Inch Posi Traction Third Member Assembly
SKU-91048345
x
            

Speedway Motors now offers you a 9" Ford street 3rd member for your street rod. We reclaim genuine Ford 9" housings, clean, inspect and install all new components. All bearings, seals, 1310 series yoke and ring & pinion are new!

These Ford 9" 3rd member assemblies feature new Pro Gears ring & pinion, choice of 3.50, 3.70, 3.89, 4.11 or 4.56, Currie 9-Plus limited slip differential, 28 or 31 spline. Shipped in handy plastic carrying case. Assembled by professionals.

 

Currie Differential Tech Bulletin (PDF)

 

910-48345 Instructions (PDF)

Three Plain 9 Super 7 Carbs on 1957-86 SB Chevy Edelbrock Intake
Three Plain 9 Super 7 Carbs on 1957-86 SB Chevy Edelbrock Intake
SKU-9251220
x
            

This tri power kit uses the Edelbrock C-357-B S/B Chevy 3x2 intake with Speedway's 9 Super 7® carbs. It has progressive linkage to give you good driveability and economy, but power when you need it. The manifold has a balanced 180° firing order port runner arrangement. It contains an exhaust gas heat riser and offers excellent performance potential. (idle-5500 rpm)

Kit includes three carbs, the intake, air cleaners, linkage kit, fuel block, fittings and red fuel line. Assembly required. Fits 1957-1986 Chevy 262-400 c.i.d. small-block Chevys.

9 Super 7® Linkage Instructions (PDF)

Note: Not applicable to an HEI based distributor system due to a clearance issue. This system must be used in conjunction with a small diameter based distributor.

The 9Super7 Carb  makes setting up a multiple carburetor induction system easier than when Strombergs were available new. Our 3 Carb kits come with one primary carburetor and two secondary carburetors while the 2 Carb kits are both primary carbs.  See our Multiple Carburetor Tech Tip for more information on using the 9 Super 7 in a 2x2 or 3x2 carb set-up.

  • Three Deuce carburetor setups come with two "secondary" carbs for front and rear intake position and one "primary" carb for central/middle position
  • All-new tooling for crisp, flawless castings
  • New aluminum base assembly allows for cooler fuel temps and better fuel efficiency as compared to the original cast iron design
  • Stainless steel screws and hardware
  • Original troublesome needle and seat replaced by a Grose-style fuel inlet valve to better cope with higher fuel pressures and improved high speed running 
  • Will not stick or dribble like the old Viton-tipped needle and seat setups
  • Extended brass throttle shaft to simplify multi-carb linkage
  • Primary Carb - (1) Middle Position
    • Choke assembly, accelerator pump, and jets have all been faithfully retained and accept standard Stromberg parts
  • Secondary Carb - (2) Front and Rear Position
    • Special base plate with no idle circuits or choke linkage
    • Special butterflies and shafts installed
    • Works best with progressive linkage
    • Idle only off the center or main carburetor
    • No more plug foul

Note: The secondary carbs have NO choke, and they have NO idle system.

915-11655 Primary 9 Super 7 Carburetor Instructions (PDF)

Longacre 72702 Computerscales WIRELESS AccuSet II
Longacre 72702 Computerscales WIRELESS AccuSet II
SKU-47572701
x
            
Save yourself time with the II and its baseline memory recall. It will store your baseline setup so you can compare it to your current setup. It has 1 slot memory that is easy to use and very helpful. The display will show all 4 wheel weights plus the cross weight. The partial % will show with the push of one button. The display face is slanted for easier viewing.
  • Accuset II control box with ZigBee wireless receiver
  • Includes Free deluxe scale pad box
  • 4 wireless pads
  • No wires to trip over, no fragile modules outside the pad
  • 4 line display shows all weights and partial %
  • LMF Satin finished pads with single load cells
  • CNC machined 15" low profile scale pads with handles and recessed connectors
  • 1/10% accuracy and 1500 lbs per pad capacity
  • Two-year limited warranty
Speedway Universal 20 Circuit Wiring Harness
Speedway Universal 20 Circuit Wiring Harness
SKU-91064027
x
            Whether you're building an option loaded car or just want to have extra circuits available for future updates, this harness is perfect and makes any job painless. Compact 5-1/2"L x 4-1/2"W x 3-1/4"H  fuse block holds 18 standard push-in fuses and can be mounted almost anywhere. 

Each high temperature wire is color coded and labeled every six inches. Also includes GM type steering column connectors. To keep costs down and the quality high, this harness does not include any switches, light sockets or plugs that you would normally already have.

  • Harness has 20 circuits, of which 18 are fused
  • Taillight leads measure 17' long
  • Includes plug for GM column, headlight switch, dimmer switch, and signal flashers

Wiring Harness Installation Instructions (PDF)

Smoothie Rams Horn Exhaust Manifolds, Small Block Chevy, Raw
Smoothie Rams Horn Exhaust Manifolds, Small Block Chevy, Raw
SKU-9300329
x
            

These classic "Rams Horn" style exhaust manifolds are great for use with most small block Chevy applications, providing optimal clearance for angle plug heads.  These manifold kits come complete with all mounting hardware and gaskets.

  • Ground smooth with no external bosses or brackets
  • 2-1/2" outlet
  • Plain, Raw finish
  • Nodular cast iron
  • For angle or straight plug heads
  • Includes all hardware and gaskets

"Muscle Car" Page 1 of 25

  • Speedway Fuel Level Gauge with Sender, 2-1/16 Inch
    Speedway Fuel Level Gauge with Sender, 2-1/16 Inch
    SKU-91065042
    x
                

    These fuel level gauge/sender kits feature a domed lens and a stainless steel bezel and a backlit white face.  The fuel sender comes with seal and and all mounting hardware.

    • 2-1/16”
    • Overall Diameter: 2.25"
    • Overall Length: 9.25"
    • Includes sender
    • 240 ohms empty, 33 ohms full
    • Stainless steel bezel
    • Backlit white face
    • Replacement light socket assembly available # 910-65071

    Learn more about selecting the proper fuel sending unit by reading our tech article, Fuel Sending Units.

  • Pinstriped iPhone Cover - Gold
    Pinstriped iPhone Cover - Gold
    SKU-2921005
    x
                Let us help you hot rod your iPhone 4.  These slick covers help to protect and customize your smart phone.
    • iPhone 4/4S only
    • Rugged aluminum back plate
    • Slimline rubber edging
  • Aeromotive 18664 Stealth Fuel Cell, 15 Gallon
    Aeromotive 18664 Stealth Fuel Cell, 15 Gallon
    SKU-91018664
    x
                

    Finally, a truly universal system that is built for street rods, drag racing, off-road, autocross, drifting and any other performance application you can think of! This complete unit has all the advantages of an in-tank fuel system; quiet cool operation, ideal fuel pump environments and a serious reduction in installation time and investment. In addition, this system eliminates the risk of fuel pump cavitation due to hard cornering, launching or braking thanks to innovative baffling built into each tank.

    • Includes Stealth 340 LPH in-tank fuel pump
    • Works with both carbureted and EFI systems
    • Return line provisions
    • Two AN8 vents with rollover valves
    • Universal 0-90 Ohm fuel level sender
    • Standard 12-bolt flush mount lid assembly
    • Natural aluminum finish
    • Ready to go simple installation

    Fuel Pump Flow Chart (GIF)

  • Aeromotive 11140 340 Stealth Fuel Pump, Centered Inlet
    Aeromotive 11140 340 Stealth Fuel Pump, Centered Inlet
    SKU-91011140
    x
                

    The Aeromotive 340 Stealth Fuel Pump is a high-output, in-tank, electric fuel pump that fits most popular EFI applications. It is a compact, lightweight pump that bolts into many existing hanger assemblies.

    What sets the 340 Stealth Pump apart is its superior flow throughout a wide pressure range. Compared to other popular aftermarket pumps, at 40 psi the 340 boasts more than 340 lph. That’s over 30% more flow, making it ideal for applications requiring more flow while retaining the factory lines and mounting provisions available in the OE configuration. The 340 is also perfect for use as a universal replacement for applications that require more flow to support forced air power adders such as turbo and supercharged applications.

    • Fits most vehicles where popular aftermarket pumps are applicable
    • Designed for in-tank use only
    • Can be used in carbureted or EFI applications
    • Turbine pump mechanism increases durability and can be used in pulse modulated applications

    910-11140 Instructions (PDF)

  • Intercomp Digital Pressure Tester
    Intercomp Digital Pressure Tester
    SKU-91381120
    x
                

    This new pressure setting tool from Intercomp can be used for several jobs. This gauge will work from 0 to 150 psi. in 1/10th of a pound.

    Digital Pressure Tester

    • Large 1/2" back lite display.
    • Gauge features 1/10th of 1% accuracy.

    Setting Mid and High Speed bypasses
    1. Will work to set a high speed up to 150psi.
    2. Comes with a -6 AN female adapter to screw your high speed into

    Setting Tire bleeders

    1. Will work from 0 PSI up. With 1/10th of a pound increments.
    2. Comes with a female quick release fitting that fit the popular Kwick change bleeders.

  • Ididit 1520690051 Plain Black Tilt Steering Column, 1969-72 Chevelle
    Ididit 1520690051 Plain Black Tilt Steering Column, 1969-72 Chevelle
    SKU-4466972
    x
                The hot rod experts at Ididit put a lot of time and  research into these retrofit steering columns, ensuring a perfect fit  for your specific vehicle. These Ididit retrofit floor shift steering  columns are designed to fit in the factory location and, in many cases,  will put the steering wheel back in its original location. They include  self-canceling turn signals, 4-way flashers and knobs and handles. The  columns are designed for use with aftermarket steering wheels. 
    • For '69-'72 Chevelle
    • Bolt-In
    • Black powdercoated
    • 8 position tilt
    • With key
    • Self canceling turn signals
    • 4 way flasher
    • Knob & Levers
    • 3-7/8 wiring plug
    • 1" - 48 lower shaft
    • Uses original under dash mount and floor mount along with the factory wiring and plug
    • Made in the USA
  • CON2R 7-002 Chrome Wing Nut, 1/4-20 Thread, 2-1/4 Across, 1-1/2 Tall
    CON2R 7-002 Chrome Wing Nut, 1/4-20 Thread, 2-1/4 Across, 1-1/2 Tall
    SKU-910322
    x
                

    This wing nut is for-sure an attention getter. Perfect topper for the air cleaner on a big four barrel, on top of your tri-power pots or an accent piece wherever you need it.

  • Speedway Extreme Gaskets, 2-1/2 Inch Collector Gaskets
    Speedway Extreme Gaskets, 2-1/2 Inch Collector Gaskets
    SKU-91013540
    x
                
    • Reusable triple-layer gasket
    • Stainless steel with a heat-resistant, rubber-based inner core
    • 0.085” thick, ultra pliable
    • Easily conforms to surface irregularities to create a tight, leak-proof seal
  • Race Ramps RR-FS FlatStoppers
    $249.99
    Race Ramps RR-FS FlatStoppers
    SKU-2367000
    x
                

    FlatStoppers were developed as a solution for people having problems with tires developing flat spots when a vehicle is parked for 30 days or longer. Once tires are set on FlatStoppers (on a level surface), they settle into the pad's concave depression, which helps support more of
    the tire. This disperses the weight of the car more evenly onto the tire - helping to prevent any flat spotting. The pads measure 22.3" long x 3.5" high x 14" wide, and will accommodate tires up to 12" wide.

    FlatStoppers will not conduct heat or cold into your tires despite changing floor temperatures.

    Flatstoppers are made with the company's patented super-lightweight 100% solid construction technique - making them highly durable, virtually indestructible, and providing a 6,000 lb. vehicle weight capacity. FlatStoppers' textured coating prevents sliding across floors - including epoxy-coated floors and RaceDeck.

    FlatStoppers won't scratch or otherwise damage floors, and won't rust.

     

  • Titan Tools 51503 Mini Tubing Bender
    $14.99
    $19.97
    Product Rating: 4.50 Stars
    Titan Tools 51503 Mini Tubing Bender
    SKU-72851503
    x
                
    • Bends 1/8, 3/16, and 1/4" tubing up to 90 degrees
    • Use with Brass, Copper, Steel, or Aluminum
    • Compact for limited accessibility applications
  • Russell Performance 641605 LS/Hemi EFI Fuel System Retrofit Kit
    Russell Performance 641605 LS/Hemi EFI Fuel System Retrofit Kit
    SKU-325641605
    x
                

    This fuel pump kit provides a complete electronic fuel system for GM LS-series and Chrysler 5.7 Hemi engine swaps in muscle cars, street rods and off-road vehicles. Kit features an Edelbrock EFI fuel pump, regulator/filter, relay, Russell Pro Flex hose, an assortment of silver and black AN hose end fittings, and all mounting hardware. When using with OEM fuel tank sending units, an additional adapter to -6 male AN is required.

    • For GM/Chevy LS and Chrysler 5.7 Hemi engine swaps into older non-EFI vehicles
    • Includes Edelbrock Electric Fuel Pump # 3594
    • Includes Edelbrock Fuel Pressure Regulator
    • Returnless Fuel System
    • Supports up to 450 HP
  • 3/8 X 3/8 Clevis
    $7.99
    3/8 X 3/8 Clevis
    SKU-6680116
    x
                The correct clevis for mounting our rack and pinion units (668-0105 & 668-0115). 
            
  • Swindell Series Sprint Car Set-Up Sheets
    Swindell Series Sprint Car Set-Up Sheets
    SKU-94082050
    x
                
    • Can be used if running a 305, 360 or 410 sprint car
    • 1 tablet contains 50 sheets
    • Easily organize your set-up notes for each race
    • Gives you a permanent record of every adjustment and set-up
    • Designed and used by World of Outlaw and Chili Bowl Champion Sammy Swindell
  • Speedway Tire Coaster Set
    $4.99
    Product Rating: 4.78 Stars
    Speedway Tire Coaster Set
    SKU-91019522
    x
                
    • Made from 100% recycled tire rubber
    • Set of four
    • Four distinct designs in each set
      • Vintage Sprint Mag
      • Kustom Cross-bar Flipper Cap
      • D-hole Stock Car Wheel
      • Redline 5 Spoke Mag
  • Bare 60 Inch Centered 9 Inch Ford Housing
    Bare 60 Inch Centered 9 Inch Ford Housing
    SKU-91046115
    x
                

    Our economical 9" Ford rear axle housing features a reclaimed center section, new 3" axle tubes, and new-style Ford ends. Total track width is 60" from hub-to-hub. You will need one 28-3/8" long axle and one 30-5/8" long axle.   Includes 8 T-bolts for the axle bearing retainer plates and 10 studs for the 3rd member.

    Third member sold separately.

     

  • Deluxe 45 Degree Brake Flaring Tool
    Deluxe 45 Degree Brake Flaring Tool
    SKU-91170081
    x
                
    • Easily form 45-degree double, single and bubble flares in OE steel, stainless steel and soft metal tubing
    • For use with 3/16"-, 1/4"-, 5/16"- and 3/8"-diameter lines
    • Turret-style design allows you to make those precision flares in minimal time
    • All the brake-flaring forming dies you need are mounted right on the turret
    • T-handle screw clamp securely holds your line in place during forming
    • Vise-mounted
    • Packaged in a blow-molded case

    Learn more about flaring lines for our automotive fittings by reading our tech article. The Principles of Automotive Fittings.



  • Dougs Headers DEC300A Stainless Steel Electric Exhaust Cut-Outs-3 Inch
    Dougs Headers DEC300A Stainless Steel Electric Exhaust Cut-Outs-3 Inch
    SKU-447303
    x
                These rugged Doug's Headers electric exhaust  cutouts allow you to convert to a wide-open, unobstructed exhaust system  with the flip of a dash-mounted switch. Doug's electric exhaust cutouts  are built to last; they feature full stainless steel construction with a  heavy-duty Dayton gear reduction rack and pinion electric drive  mechanism. Best of all, these cutouts use a self-cleaning, knife-edge  seat for a leakproof seal every time, whether open or closed. Doug's  Headers electric exhaust cutouts include a pre-wired harness, a toggle  switch, and fuses for an easy installation.
    • 3.000 in.
    • Stainless steel
    • Sold as a pair
    • Includes wiring harness
  • Metal Pegboard Tool Organizer, 32 x 32 Inch Wall Control Storage System
    Metal Pegboard Tool Organizer, 32 x 32 Inch Wall Control Storage System
    SKU-9103232
    x
                Durable, all-steel construction will not warp, fray  or crack. Attractive, scratch  resistant,  baked-on powder coat finish wipes clean for long-lasting  beauty for any  shop or work area. Installation is easy and absolutely no  framework is  required. 
    • 32" tall x 32" wide x 3/4" deep
    • Pack of two
    • Durable and versatile
    • 20 gauge steel with a baked-on rust and scratch resistant finish
    • Slotted to accept Wall Control accessories
    • Holes accept conventional 1/4" peg hooks
    • Choose from blue, grey, red, white, or galvanized steel
  • Speedway Electric Speedometer, 3-3/8 Inch Diameter
    Speedway Electric Speedometer, 3-3/8 Inch Diameter
    SKU-91065051
    x
                These electric speedometers are perfect for your rod or race project. They feature a white face with bold black lettering and a bright orange needle for quick monitoring.  Our 0-160 mph speedometers also come with a stainless steel bezel and a complete installation kit. 
    • 3-3/8” body diameter
    • 3-3/4 ” bezel
    • Overall Diameter: 3-3/4"
    • Body Length: 1.60"
    • Stud Length: 1.00"
    • Backlit white face with black lettering
    • Orange needle
    • Electric
    • 0-160 mph range
    • Stainless steel bezel
    • Includes installation kit
    • SENDER NOT Included
    • Replacement light socket assembly available # 910-65075

    Instructions (PDF)

  • Dura-Bond FKC-1HP Small Block Chevy Engine Finishing Hardware
    Dura-Bond FKC-1HP Small Block Chevy Engine Finishing Hardware
    SKU-9153502
    x
                

    Kit Includes:

    • (4) Head Dowels
    • (2) Timing Cover Dowles
    • (3) Cam Bolts
    • (1) Cam Lock Plate
    • (2) Oil Filter Adaptor Bolts
    • (1) Long Woodruff Key
    • (2) Short Woodruff Keys
    • (2) Transmission Dowels
  • Longacre Accuset II Scale Kit
    $999.99
    Product Rating: 4.00 Stars
    Longacre Accuset II Scale Kit
    SKU-47572593
    x
                
    • Push one button for all 4 wheel weights plus cross weight
    • Push a second button for all partial %
    • Baseline memory recall
    • Heavy duty red HiFlex cables with billet AN connectors
    • 4 LMF™ swirl finished 15" x 15" low profile pads
    • 1500 lb. per pad capacity, 6000 lb. total
    • 2-year limited warranty
    • Includes FREE scale pad box

    Instructions (PDF)

  • Accel 9011C GM HEI 75-86 Extreme 9000 Spark Plug Wires-Over Valve
    Accel 9011C GM HEI 75-86 Extreme 9000 Spark Plug Wires-Over Valve
    SKU-1059011
    x
                

    Accel offers the cure for burnt spark plug wire boots with the Extreme 9000 Series Ceramic spark plug wire set. These 8mm spiral core spark plug wires have ceramic boots on the spark plug end of the wires which makes it impossible to melt or burn boots. If you are running headers with close tolerances, have an engine bay with little room or an RV with boots that melt because of heat, these wire kits are the answer for burnt and melting boots.

    • 8mm Ferro-Spiral EMI/RFI supression core
    • 500 Ohms/ft resistance
    • Ceramic boots will withstand 2000° F
    • Stainless terminals
    • For 1975-86 GM small block V8 HEI (over valve covers)

    Ceramic Wire Core Cut-A-Way (Link)

  • Standard Workbench Tool Organizer Kit, Wall Control Storage System
    Standard Workbench Tool Organizer Kit, Wall Control Storage System
    SKU-91030400
    x
                Over 10.5 sq. ft. of storage space and assorted  shelving options, hooks and brackets. The standard workbench provides  the superior, easy access storage needed for a safe and efficient  workspace.

    Galvanized steel panels are easy to install with pre-drilled mounting holes on 16" centers. A built-in frame flange provides ample hook clearance and full access to all holes. The patented Double Offset hook engagement improves hook and stability for safer, more secure tool storage. 

    Included:
    • (3) Combo panels 32" x 16"
    • (1) 9" shelf assembly with dividers
    • (1) 6" shelf assembly
    • (3) Plastic bins with bin hanger
    • (1) Screwdriver holder assembly
    • (1) Hammer bracket
    • (20) Assorted hooks & brackets
    • Mounting hardware & instructions
    • Choose from red, white, blue, or black
  • Ididit 1620860051 Black Tilt Steering Column, 1970-75 Camaro
    Ididit 1620860051 Black Tilt Steering Column, 1970-75 Camaro
    SKU-4467075
    x
                The hot rod experts at Ididit put a lot of time and  research into these retrofit steering columns, ensuring a perfect fit  for your specific vehicle. These Ididit retrofit floor shift steering  columns are designed to fit in the factory location and, in many cases,  will put the steering wheel back in its original location. They include  self-canceling turn signals, 4-way flashers and knobs and handles. The  columns are designed for use with aftermarket steering wheels. 
    • For '70-'75 Camaro
    • Bolt-In
    • Black powdercoated
    • 8 position tilt
    • With key
    • Self canceling turn signals
    • 4 way flasher
    • Knob & Levers
    • Collapsible
    • 1970 -74  use 3-7/8" wiring plug
    • 1975 uses a 4-1/4" wiring plug
    • 1" - 48 spline lower shaft
    • Uses original under dash mount and floor mount along with the factory wiring and plug
    • Made in the USA
  • Tire Grinding Disc, 7 Inch Nail Head
    Tire Grinding Disc, 7 Inch Nail Head
    SKU-91082081
    x
                
    • 7" diameter
    • Nail head design
    • Very aggressive, check sanctioning body rules before use

    NOTE: Use extreme caution - serious injury can result from the use of discs. When powered by a buffer, these discs can cut your arm or leg off.

    • Never use in a loose tire
    • Never use on a tire that is not inflated and fastened
    • Do not use while wearing loose fitted clothing
    • Use eye and face protection
  • Edelbrock 5412 289-302 Ford Three Deuce Tri Power Intake Manifold
    Edelbrock 5412 289-302 Ford Three Deuce Tri Power Intake Manifold
    SKU-3255412
    x
                
    This intake for 3 deuces on a small block Ford does NOT have clearance for the Powerfire, Flamethrower, OEM, or any HEI style distributor. It requires the smaller cap as available on distributor 547-8352
    • 289-302 Small Block Ford 3 deuce aluminum intake
    • Designed to use 3 bolt carburetors such as the Speedway 9 Super 7's
    • For Stock/OEM standard deck
    • RPM range, Idle-5,500
    • Low Rise, Dual-plane design
    • Improved throttle response
    • Made of aluminum
    • Natural finish
  • Mr Gasket 97 Carburetor Insulator Plate, Holley/AFB Carbs, 1/4 Inch
    Mr Gasket 97 Carburetor Insulator Plate, Holley/AFB Carbs, 1/4 Inch
    SKU-55097
    x
                These Mr Gasket Heat Dissipator carburetor insulator gaskets are  top notch when it comes to eliminating the heat transfer from your  intake to your carb. The heavy-duty gaskets are made of heat absorbing gasket material separated by layers of aluminum alloy.
    • For Holley/AFB/Edelbrock carburetors
    • 1/4" thick
    • 4-hole opening
  • Aeroquip FBM4463 Black Hose End Coupler Fitting 180 Degree Angle -8 AN
    Aeroquip FBM4463 Black Hose End Coupler Fitting 180 Degree Angle -8 AN
    SKU-61710271
    x
                

    Aeroquip reusable hose ends are easier to install than cutter-style fittings and are more user-friendly.  With their compression-style design, they can be reused without damaging the fitting, and the nipple pilot prevents damage to the inner tube.  Their one-piece design allows for improved flow and eliminates two potential leak points (brazed joints).  They're available in black anodized finish.

    • 180 Degree 
    • Aluminum
    • Hose End Size: -8 AN
    • Fitting Style: Reusable non-swivel
    • Adapter Size: -8 AN
    • Adapter Attachment: Female threads
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • Unique taper design ensures easy assembly
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Accepts a variety of lightweight aluminum AN style adapters & fittings
    • Available in a Black corrosion resistant finish

    Fitting Thread Application Chart (GIF)

  • RCI 126 Replacement Flapper Valve, 16 Bolt
    RCI 126 Replacement Flapper Valve, 16 Bolt
    SKU-6007033
    x
                

    This fuel tank cap seal flapper is designed to retrofit all RCI Circle Track cells with the 16 bolt oval type 4" cap assemblies.

    This flapper is designed to slow the fuel leakage in the event of a vehicle roll over.

    A must have safety item! 

    • Replacement nylon flapper valve for all "16 bolt top" RCI fuel cells
    • Compatible with gas or alcohol
    • Overall Length: 4-3/8"
    • Overall Width: 3-3/4"
    • Overall Thickness: .03"
    • Clear plastic material

    Note: Per vendor, this flapper valve should be replaced on a yearly basis.

  • Billet Remote Battery Terminal Mount
    Billet Remote Battery Terminal Mount
    SKU-91012528
    x
                Billet Remote Battery Terminal Mount
            
  • Speedway Extreme Gaskets, 3 Inch Collector Gaskets
    Speedway Extreme Gaskets, 3 Inch Collector Gaskets
    SKU-91013541
    x
                
    • Reusable triple-layer gasket
    • Stainless steel with a heat-resistant, rubber-based inner core
    • 0.085” thick, ultra pliable
    • Easily conforms to surface irregularities to create a tight, leak-proof seal
  • Winters Performance POSTER-10 10-Spline Quick Change Gear Chart
    Winters Performance POSTER-10 10-Spline Quick Change Gear Chart
    SKU-8021000
    x
                Perfect for trailers or the race shop!  19" x 25"  Laminated.
            
  • Callies SA0213CS Compstar 4340 Crankshaft, 427 S/B Chevy, 6.0 Rod
    Callies SA0213CS Compstar 4340 Crankshaft, 427 S/B Chevy, 6.0 Rod
    SKU-2498113
    x
                Callie's solid modeling abilities provide a great  advantage in product  development. They’re able to precisely locate  material where it will  yield the greatest advantage in terms of both  strength to weight, and  balance ability.

    Beginning with properly placed counterweights that not only improve balance but reduce bearing loads, every aspect of these highly stressed components has been analyzed. The forgings are rough machined in a process that includes double stress relief operations that make these crankshafts very dimensionally stable.

    Hardened with a deep nitride, Compstar cranks are ideal for all types of abusive racing environments. All rod journals are drilled and counterweights are profiled for piston clearance. With a consistent grind and polish, along with precise stroke and index, you will see why we say these crankshafts are Compstar Correct!
  • Currie CE-98129-27375 27-3/8 Long 31 Spline Rear Axle
    Currie CE-98129-27375 27-3/8 Long 31 Spline Rear Axle
    SKU-91046106
    x
                Please view the product's page for more information
            
  • Lucas Oil 10684 SAE 20W50 Hot Rod Engine Oil, One 5 Quart Jug
    Lucas Oil 10684 SAE 20W50 Hot Rod Engine Oil, One 5 Quart Jug
    SKU-484106841
    x
                

    Lucas Hot Rod & Classic Car Motor Oil SAE 20W-50 is manufactured with the highest quality paraffinic base oils and is fortified with a unique additive package containing high levels of zinc, molybdenum and phosphorus, which provides a tougher, thicker additive film for maximum protection even under the most severe conditions. Lucas SAE 20W-50 Engine Oil lowers oil temperatures, extends oil life and minimizes metal fatigue. It improves the film strength between the cylinder wall and piston rings and slows oil burning and improves pressure in worn engines. It has good cold temperature properties and stands up to high operating temperatures. It is compatible with methanol and all racing fuels, as well as with synthetic and non-synthetic oils.

    Lucas Hot Rod & Classic Car Motor Oil SAE 20W-50 is for muscle, showroom, classic and trophy cars without catalytic converters. It can be used in racing applications. Not recommended for passenger car use.

    • Contains the high levels of ZDDP (Zinc) necessary to protect flat tappet cams, lifters, and pushrods
    • Provides excellent thermal stability in case of overheating
    • A true long lasting performance lubricant
    • Contains special Lucas additives that protect against rust, corrosion, and dry starts associated with long periods of non-use
  • 1964-67 Chevelle 7/8 Idler Arm
    1964-67 Chevelle 7/8 Idler Arm
    SKU-9105142
    x
                
    • '64-'67 Chevelle idler arm
    • For use with 7/8" diameter center link stub
    • Check your application before ordering
  • Speedway Extreme Gaskets, SB Chevy, 1-5/8 In Rectangular Port
    Speedway Extreme Gaskets, SB Chevy, 1-5/8 In Rectangular Port
    SKU-91013505
    x
                
    • Reusable triple-layer exhaust gasket
    • Stainless steel with a heat-resistant, rubber-based inner core
    • 0.085” thick, ultra pliable
    • Available for many popular flange configurations
    • Easily conforms to surface irregularities to create a tight, leak-proof seal
    • Works well with a wide range of flange surfaces and block and head materials
  • Flo-Tek 408-500 Big Block Chevy Aluminum Cylinder Head, 360cc, Bare
    Flo-Tek 408-500 Big Block Chevy Aluminum Cylinder Head, 360cc, Bare
    SKU-72250360
    x
                
    • Head is sold individually
    • 2.250” intake valve, 1.880” exhaust
    • 360cc intake runners 
    • 128cc exhaust runners
    • 121cc chambers
    • PC seals
    • High temp exhaust seats
    • Manganese bronze intake guides
    • Phosphor bronze exhaust guides
    • Multi angle valve job
    • Angle plugs
    • Sold individually
  • Lucas Oil 10689 SAE 20W-50 Hot Rod Engine Oil, 1 Quart
    Lucas Oil 10689 SAE 20W-50 Hot Rod Engine Oil, 1 Quart
    SKU-484106891
    x
                

    Lucas Hot Rod & Classic Car Motor Oil SAE 20W-50 is manufactured with the highest quality paraffinic base oils and is fortified with a unique additive package containing high levels of zinc, molybdenum and phosphorus, which provides a tougher, thicker additive film for maximum protection even under the most severe conditions. It lowers oil temperatures, extends oil life and minimizes metal fatigue. It improves the film strength between the cylinder wall and piston rings and slows oil burning and improves pressure in worn engines. It has good cold temperature properties and stands up to high operating temperatures. It is compatible with methanol and all racing fuels, as well as with synthetic and non-synthetic oils.

    Lucas Hot Rod & Classic Car Engine Oil SAE 20W-50 is for muscle, showroom, classic and trophy cars without catalytic converters. It can be used in racing applications. Not recommended for passenger car use.

    • Contains the high levels of ZDDP (Zinc) necessary to protect flat tappet cams, lifters, and pushrods
    • Provides excellent thermal stability in case of overheating
    • A true long lasting performance lubricant
    • Contains special Lucas additives that protect against rust, corrosion, and dry starts associated with long periods of non-use
  • Fast Shafts BBSK-10 Billet U-Bolt Strap Kit, 1-1/16 Inch
    Fast Shafts BBSK-10 Billet U-Bolt Strap Kit, 1-1/16 Inch
    SKU-91048200
    x
                

    NEVER OVERTIGHTEN U-BOLTS AGAIN !! 

    These universal billet strap kits fit 1310 U-Joint, Steel Girdle, Ford 9 inch.  They include case hardened bolts, nuts, flat and lock washers.

    • Billet strap kit
    • Fit 1310 U-Joint, Steel Girdle, Ford 9 inch
    • Include case hardened bolts, nuts, flat and lock washers
Goto Previous PagePrevious Page
1 2 3 4 5 ... 25