Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Muscle Car Steering At Speedway Motors

There is no denying that muscle cars are the hottest rides on the street right now. Speedway Motors has the high performance muscle car parts to take you back to the '60s and '70s! Whether you run a Chevy, Ford or Mopar, you can find the right stuff for it here! Similar to your muscle car, Speedway Motors leaves our competitors in the dust when it comes to prices and selection.

Featured Products
Tuff Stuff GM Saginaw Power Steering Pump with Reservoir
Tuff Stuff GM Saginaw Power Steering Pump with Reservoir
x
            These Saginaw power steering pumps from Tuff Stuff come with a new reservoir, billet cap, chrome hardware and new dipstick. Desirable early style 1965-79 pump with threaded and keyed shaft for easy pulley installation. Available in powder coated black or chrome finish. Hoses are available from most local parts stores. 

Pump has a 3/8" hose barb for return line and a female 5/8"-18 inverted flare fitting for the high pressure outlet. Pulley not included.

  • Saginaw power steering pump with a new reservoir, billet cap, chrome hardware and new dipstick
  • Powder coated black or chrome
  • Keyed shaft for easy pulley intallation
  • Pulleys available in plain, polished, and chrome
  • 6" diameter pulleys not included

Works well with small block Chevy engine brackets 916-67920 or 913-32902.

1958-64 Chevy Power Steering Conversion Kit
1958-64 Chevy Power Steering Conversion Kit
x
            

You get a new 500 series power steering box, new centerlink, new pitman and idler arm. This is a straight bolt-in conversion, although '58-'60 cars need to order the 910-32582 idler arm adapter. Steering box uses inverted flare fittings, 11/16" fine on the pressure side and 5/8" fine thread on the return side. Has a 3/4" 30-spline input shaft.

Note:  Some applications require slight modification to the radiator tank to clear the steering box.

1958-1964 Chevy Power Steering Conversion Installation Instructions 

1955-56 Chevy 15 Inch Steering Wheel
1955-56 Chevy 15 Inch Steering Wheel
x
            Made  to fit to the original steering column using all the original horn,  nuts, and directional parts. The American-Retro wheels come complete  with a chrome horn ring and a center cap. Installation is  easy- just bolt it on! Finished in black. For other colors, simply paint  to match your vehicle
  • Made to fit to the original steering column using the original horn, nut, and directional parts
  • Smaller 15" design replaces original 18" steering wheel
  • Provides more interior room and a comfortable driving position
  • Finished in black
  • Can easily be painted to match your interior
Standard GM 5-Position Tilt Steering Column, 32 Inch Long, Chrome
Standard GM 5-Position Tilt Steering Column, 32 Inch Long, Chrome
x
            These 5-position tilt columns are for those who want great  performance   at affordable pricing. Made from steel 2" tube. Standard 1"  DD output   shaft. Column accepts any 1969-94 GM car steering wheel or  aftermarket   adapter.
  • Chrome plated finish
  • 32" length
  • Floor shift applications
  • 1" DD output shaft
  • Standard GM wiring and plug
  • Includes tilt, turn and hazard levers/knob

Be sure to include Painless Wiring's GM steering column pigtail kit (91064039) with your order for an easier installation.

"Muscle Car, Steering" Page 1 of 14

  • Ididit 1520690051 Plain Black Tilt Steering Column, 1969-72 Chevelle
    Ididit 1520690051 Plain Black Tilt Steering Column, 1969-72 Chevelle
    x
                The hot rod experts at Ididit put a lot of time and  research into these retrofit steering columns, ensuring a perfect fit  for your specific vehicle. These Ididit retrofit floor shift steering  columns are designed to fit in the factory location and, in many cases,  will put the steering wheel back in its original location. They include  self-canceling turn signals, 4-way flashers and knobs and handles. The  columns are designed for use with aftermarket steering wheels. 
    • For '69-'72 Chevelle
    • Bolt-In
    • Black powdercoated
    • 8 position tilt
    • With key
    • Self canceling turn signals
    • 4 way flasher
    • Knob & Levers
    • 3-7/8 wiring plug
    • 1" - 48 lower shaft
    • Uses original under dash mount and floor mount along with the factory wiring and plug
    • Made in the USA
  • Unisteer 8001090-01 68-70 Mustang Manual Rack & Pinion Conversion Kit
    Unisteer 8001090-01 68-70 Mustang Manual Rack & Pinion Conversion Kit
    x
                

    This rack & pinion conversion kit will finally give your classic 1968-70 Mustang the ease of steering and road feel modern cars have. Each kit is engineered to bolt in without sacrificing steering geometry or safety. The custom steering gear is engineered to match the stock suspension, and has NO BUMP STEER. Installation is extremely simple, since the unit is a true bolt-on.

    Each kit includes everything needed to do a complete installation on a Mustang with the original column.

  • 14mm to Male AN6 Banjo Bolt Fitting for Power Steering Pump
    14mm to Male AN6 Banjo Bolt Fitting for Power Steering Pump
    x
                

    These power steering adapter fittings are designed to simplify the hose connection on your power steering lines. They are made from quality material and are designed to withstand even the harshest environments. The adapter fittings are the perfect solution for adding new lines or for those tight-fit areas where normal, straight fittings won't fit.

    Banjo Bolt Fitting for Power Steering Pump

    • 14mm to Male AN6 
    • Zinc-plated steel assembly
    • For the pressure connection (outlet) to the pump.
    • 90 Degree
    • Swivel
    • Male Threads
  • Speedway Classic 12 Inch Black Steering Wheel w/ Holes
    Speedway Classic 12 Inch Black Steering Wheel w/ Holes
    x
                

    Smooth black cushion with chrome spokes. Has the common 3 bolt pattern mount.  Wheels feature rubber steering wheel grip.  Chrome center cap is included.

    • Smooth black cushion
    • 3 bolt pattern mount
    • Steel
    • Chrome cap included

    Note: These steering wheels require addtional purchase of a horn button retainer, not included with steering wheel.  We offer our corresponding retainer (41010112) and various adapter kits for your specific application. 

     

  • AFCO 30307 U-Joint, 9/16 Inch-26 Spline
    AFCO 30307 U-Joint, 9/16 Inch-26 Spline
    x
                

    These splined U-joints feature a set screw & lock-nut.  Maximum operation angle of this steering universal joint is 32°.

    • 9/16"-26 spline x 3/4" round weld-on
    • Greased needle bearing with Teflon seal
    • Forged 1045 steel
    • Broached spline for better fit
    • Heat-treated forgings
    • 1-1/8" O.D. x 3-3/4" length

    Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

     

  • 1955-57 Chevy Power Steering Centerlink Conversion
    1955-57 Chevy Power Steering Centerlink Conversion
    x
                So your car has the original power steering which is a valve on the end of the centerlink. Problem is they never did work right and made switching to a newer steering box a pain. To fix your problem you just unscrew the original power steering valve off the centerlink, screw this gizmo back on and now you can add a new 605 style power steering box and still use your original power steering centerlink. Neat huh.
            
  • Gates 350110 1967-1970 Mustang Power Steering Return Hose Fitting
    Gates 350110 1967-1970 Mustang Power Steering Return Hose Fitting
    x
                

    These power steering return hose fittings from Gates are furnished separately and work on 1967-70 Mustang applications.  They feature inverted flare threads and a zinc-dichromate plated finish to resist corrosion.

    • Male inverted flare end
    • End (1) Diameter: 3/8"
    • Works with standard 3/8" hose
    • Zinc-dichromate plated finish to resist corrosion

    *Double check "Application" tab to make sure this item will work with your correct engine.

    1964-70 Mustang Power Steering Hose Application Guide (GIF)

  • Sweet Mfg. 001-21040 Rack and Pinion Replacement Boot
    Sweet Mfg. 001-21040 Rack and Pinion Replacement Boot
    x
                

    These high quality rubber replacement boots for Sweet Mfg. rack and pinions perform as good as they look.

    • Replacement for Sweet Mfg. rack and pinion
    • High quality rubber construction

     

  • Chrome Plated Billet Wings Style Steering Wheel
    Chrome Plated Billet Wings Style Steering Wheel
    x
                

    This stylish 14 inch steering wheel features a half wrap, leather grip design, 2" dish, and chrome plated billet aluminum spokes. Wheel has a 9-bolt mounting pattern requiring a hub adapter to install on your GM style column. Hub adapter 910-5602 and horn button 910-5600 sold separately.

  • 1973-77 Chevelle A-Body Inner Tie Rod
    1973-77 Chevelle A-Body Inner Tie Rod
    x
                

    We stock those hard-to-find 1973-77 GM A-Body tie rods and adjustment sleeves.

    • Inner Tie Rod: LH threads

    1973-77 GM A-Body  

    • Buick (Century, Regal)
    • Chevy (Chevelle, Malibu, El Camino)
    • GMC (Sprint)
    • Oldsmobile (Cutlass, 442, Hurst Olds)
    • Pontiac (Grand Prix, LeMans)

     

  • Gates 353120 1964-1966 Mustang Power Steering Cylinder Hose
    Gates 353120 1964-1966 Mustang Power Steering Cylinder Hose
    x
                

    These power steering cylinder hoses from Gates are authentic reproductions of the originals. They work on 1964-66 Mustang applications and include fittings already assembled.

    • Male inverted flare ends
    • End diameter: .3125"
    • Length: 9-3/4"

    Note: Two of these hoses are required for Mustang applications.

    1964-70 Mustang Power Steering Hose Application Guide (GIF)

  • 1955-57 Chevy Car Outer Tie Rod End
    1955-57 Chevy Car Outer Tie Rod End
    x
                

    We stock these hard to find replacement tie rods that are a must when rebuilding your classic vehicle.  They will give your Tri-5 overall better handling and a positive feel while cruising the strip.  These outer tie rod ends feature 9/16" left hand thread. The inner tie rod ends are right hand thread and the adjuster sleeve makes the adjustment for toe in by rotating clockwise or counter clockwise.

    • Meets or exceeds factory OEM specifications
    • Overall better handling and a positive feel
    • 9/16" Left Hand Threads
    • Overall Length: 4 Inch (including 2-1/4" of threads)
  • Ididit 1250280010 28 In Pln Floor Shift Collapsible RH Drive Tilt Steering Column
    Ididit 1250280010 28 In Pln Floor Shift Collapsible RH Drive Tilt Steering Column
    x
                For the dedicated hobbyist overseas, the Ididit Collapsible Series RH Drive floor shift tilt columns are one of the safest products you can install in your vehicle. Combined with the proper collapsible floor mount and underdash mount, this column will sustain impacts better than any standard steering column can, keeping you safe. These Right Hand Drive Collapsible columns include all the same great features as Ididit's Universal Tilt Series columns such as, the unique 8-position tilt, self-canceling turn signals, 4-way flashers and the standard dress-up kit. Available in paintable steel.
    • RH Drive
    • Paintable steel
    • Upper tube 2-¼" diameter
    • Lower tube 2" diameter
    • 8 Position tilt
    • Self canceling turn signal
    • 4 way flasher
    • Standard dress up kit
    • 69 or Newer GM passenger car wheel adaptor
    • 3-7/8 flat plug
    • 1" DD IDIDIT output shaft
    • 100% American made
  • Billet Specialties 30425 Billet Vin Tec Steering Wheel
    Billet Specialties 30425 Billet Vin Tec Steering Wheel
    x
                

    Billet Specialties is the worldwide leader in billet steering wheels. Their relentless attention to detail is apparent both front and back on these works of automotive art. The backside of each wheel features milled finger notches for an ultra-comfortable grip.

    Wheel ONLY - half-wrap trim, horn button, and steering column adapter available separately. Has a 14" diameter with a 2" dish.

  • Grant 3249 3-Bolt Steering Wheel Adapter, Ford Applications
    Grant 3249 3-Bolt Steering Wheel Adapter, Ford Applications
    x
                

    This is the standard Grant steering wheel installation kit for Ford steering columns. These kits may be used to install all Classic Series, Challenger Series or Signature Series steering wheels. Each kit contains complete step-by-step instructions, a die cast hub, Grade 5 hardware and matte black trim pieces.

    Adapter Application Chart (GIF)

    410-3249 Instructions (PDF)

  • O-Ring to Inverted Flare Power Steering Adapter
    O-Ring to Inverted Flare Power Steering Adapter
    x
                

    If you have a power steering pump using late model style O-ring sealed hoses that you need to adapt to traditional inverted flare hoses, this inverted flare adapter is a simple fix. Simply insert the adapter into the flow control fitting and then install your inverted flare hose.

    Use to convert from 16mm o-ring to 5/8" inverted flare style.

  • Ididit 1620860051 Black Tilt Steering Column, 1970-75 Camaro
    Ididit 1620860051 Black Tilt Steering Column, 1970-75 Camaro
    x
                The hot rod experts at Ididit put a lot of time and  research into these retrofit steering columns, ensuring a perfect fit  for your specific vehicle. These Ididit retrofit floor shift steering  columns are designed to fit in the factory location and, in many cases,  will put the steering wheel back in its original location. They include  self-canceling turn signals, 4-way flashers and knobs and handles. The  columns are designed for use with aftermarket steering wheels. 
    • For '70-'75 Camaro
    • Bolt-In
    • Black powdercoated
    • 8 position tilt
    • With key
    • Self canceling turn signals
    • 4 way flasher
    • Knob & Levers
    • Collapsible
    • 1970 -74  use 3-7/8" wiring plug
    • 1975 uses a 4-1/4" wiring plug
    • 1" - 48 spline lower shaft
    • Uses original under dash mount and floor mount along with the factory wiring and plug
    • Made in the USA
  • 1955-56 Chevy 15 Inch Steering Wheel
    1955-56 Chevy 15 Inch Steering Wheel
    x
                Made  to fit to the original steering column using all the original horn,  nuts, and directional parts. The American-Retro wheels come complete  with a chrome horn ring and a center cap. Installation is  easy- just bolt it on! Finished in black. For other colors, simply paint  to match your vehicle
    • Made to fit to the original steering column using the original horn, nut, and directional parts
    • Smaller 15" design replaces original 18" steering wheel
    • Provides more interior room and a comfortable driving position
    • Finished in black
    • Can easily be painted to match your interior
  • Power Steering Fitting, -6 AN to 1/2 Inch-20 O-Ring
    Power Steering Fitting, -6 AN to 1/2 Inch-20 O-Ring
    x
                These steel fittings have a straight thread with o-ring on one side and the common AN6 on the other. Common to Ford rack and pinion and others.
            
  • Power Steering Hose Kit, -8 AN Reservoir
    Power Steering Hose Kit, -8 AN Reservoir
    x
                

    This power steering hose kit is just what you need to plumb your driver's side remote reservoir power steering set up. The AN 8 hose kit includes 4' of AN 6 high pressure hose, 5' of AN 6 blue aeroquip hose and 3' of AN8 blue aeroquip hose. One 45° AN 6 and one 90° AN 6 fittings are included as well as an AN 6 straight brass push-on and one AN 6 and two AN 8 90° push-on hose ends.

    NOTE: Does NOT contain steering box fittings 

  • Lokar DUK-2200 Steering Column Dress-Up Kit, Brushed Aluminum
    Lokar DUK-2200 Steering Column Dress-Up Kit, Brushed Aluminum
    x
                

    3-piece Seamless Steering Column Dress-Up Kit. Unique one-piece solid billet aluminum design. Kit includes Turn Signal Lever, Tilt Steering Lever and Emergency Flasher Knob. Kit fits all GM, 1969 through 1976 Chrysler, and all aftermarket columns with single screw design.

    • No steel and chrome combinations.
    • Appearance is smooth and sleek. 
    • Adds class and style to any column.
  • 1964-67 Chevelle 7/8 Idler Arm
    1964-67 Chevelle 7/8 Idler Arm
    x
                
    • '64-'67 Chevelle idler arm
    • For use with 7/8" diameter center link stub
    • Check your application before ordering
  • 1968-74 Mopar B Body Rack and Pinion Kit - B/B Engine
    1968-74 Mopar B Body Rack and Pinion Kit - B/B Engine
    x
                

    You've spent a lot of money fixing up your classic Mopar, and it would be silly to scrimp on the steering now. These power rack and pinion conversion kits will give you better feel and control than the original ever had, plus it's easy to install.

    Kit features all of the high quality components needed to transform your Mopar's steering.  Includes:

    • Mounting Bracket
    • Mounting Hardware
    • Tie Rod Ends
    • Power Steering Pump Kit
    • Steering Shaft
    Instructions (PDF)
  • Ididit 1120642020 1964-66 Mustang Tilt Steering Column, Chrome
    Ididit 1120642020 1964-66 Mustang Tilt Steering Column, Chrome
    x
                

    Wouldn't it be nice to have a tilt column in your Mustang and still be able to use your original steering wheel? These columns bolt to the original dash mount and include a new lower column mount. The wiring is also easy to hook-up. Requires you to modify the original input shaft on the steering box and you will need coupler 446-3449 that is sold separately.

    • Chrome plated steel finish 
    • Accepts stock steering wheels 
    • Self-Canceling Turn Signals
    • 8-Position Tilt
    • 4-Way Flashers
    • Knobs and Handles
    • Ford Turn Signal Switch
    • Ford Top Shaft
    • Floor Mount included
    • 3/4"-36 Lower Shaft

    446-6466C Instructions (PDF)

  • 1975-81 Camaro/Firebird Outer Tie Rod
    1975-81 Camaro/Firebird Outer Tie Rod
    x
                

    Outer tie rod for 1975-1981 Camaro/Firebird. See Application tab to ensure this part fits your vehicle. 

    • Moog # ES441RL
    • 11/16" threads
  • Tie Rod Sleeve - 4.75 x 11/16"
    Tie Rod Sleeve - 4.75 x 11/16"
    x
                Tie rod adjustment sleeve for 1970-81 Camaro/Firebird, 1968-72 GM A-Body (Chevelle), 1973-77 GM A-Body (Chevelle), and Dirtworks Chassis. 
            
  • Unisteer 8000770-01 1967-74 GM Manual Rack & Pinion Conversion Kit
    Unisteer 8000770-01 1967-74 GM Manual Rack & Pinion Conversion Kit
    x
                

    This rack & pinion conversion kit will finally give your classic 1967-69 Camaro or Firebird the ease of steering and road feel modern cars have. Each kit is engineered to bolt in without sacrificing steering geometry or safety. This rack is specifically designed and built for the Camaro so that it matches the factory steering geometry. The result is very little bump steer!

    The rack comes mounted on the brackets which makes installation a breeze. The unit mounts to the rear of the cross member, bolting to the lower stock control arm bolts. The outer tie rod ends are bolted to the stock steering arms. No fabrication required!

    Small, compact, offers maximum ground clearance, and can drop up to 65 lbs. off the stock front end.

    Kit includes:

    • Manual Rack & Pinion
    • Mounting Bracket
    • Outer Tie Rods
    • Hardware
    • Installation Instruction Sheet
    Fits
    • 1967-69 Camaro/Firebird
    • 1968-74 Nova X-Body 
    Instruction Manual (PDF)
  • Unisteer 8010740-01 1968-72 Chevelle Power Rack & Pinion Kit w/ Pump
    Unisteer 8010740-01 1968-72 Chevelle Power Rack & Pinion Kit w/ Pump
    x
                

    This rack & pinion conversion kit from Unisteer will give your 1968-1972 Chevelle the ease of steering and road feel modern cars have. Precisely engineered to bolt in without sacrificing steering geometry or safety.

    Kit includes the power rack, mounting bracket, power steering pump kit with a clip-on resevoir for a long water pump, and steering shaft kit designed for a factory steering column as well as all the necessary hardware to complete the installation. The kit features a black powder coated heavy-duty bracket that eliminates any twisting or flexing present in other kits.

    910-32309 Instructions (PDF)

  • Billet Specialties 31120 Steering Column Adapter for 1967-94 GM
    Billet Specialties 31120 Steering Column Adapter for 1967-94 GM
    x
                
    • Precision machined 6061-T6 billet aluminum
    • Fully polished
    • Stainless internal hardware
    • Thickness:  2.25"
    • Fits 1967-1994 GM
  • 1975-81 Camaro Tie Rod & Ball Joint Kit
    1975-81 Camaro Tie Rod & Ball Joint Kit
    x
                

    We make it easy to order replacement parts for your Chevy Camaro. This one part number includes:

    • outer tie rods
    • inner tie rods
    • tie rod sleeves
    • center link
    • idler arm
    • upper ball joints
    • lower ball joints

    Note: For use with power steering cars only.

  • 1964-88 GM Power Steering Box, 3/4 Inch 30-Spline Input
    1964-88 GM Power Steering Box, 3/4 Inch 30-Spline Input
    x
                

    Remanufactured GM 800 Series power steering boxes have a 16:1 ratio and were used in midsize GM cars from 1964-1988. Painted black and include -6 AN fittings to make it easier to fabricate hoses if needed. Pitman arm not included. No core return is required.

    Note: Not compatible with OEM 45° flare fittings.

  • 1965-1991 GM 525 Manual Steering Box w/ 3/4-30 Input Spline
    1965-1991 GM 525 Manual Steering Box w/ 3/4-30 Input Spline
    x
                

    This Saginaw manual steering box fits many GM applications from 1965-1991 and probably many more. It accepts either our universal pitman arm (702-2940) or your stock GM arm (small style, like our 910-32552). Box has a 25:1 ratio (6.25 turns lock-to-lock) with a 3-13/16" long input shaft with 3/4" 30-splines.

    • Input shaft is 3/4"-30 spline
    • 6.25 turns lock to lock
    • 25:1 ratio
    • If you turn the input clockwise, the output also turns clockwise.
    • Stock specifications on this gear refer to it as 6 rounds lock to lock for a 24:1 ratio.
    • 36 Spline
    • 1.058 Diameter Top of Splines
    • 1.100 Diameter Middle of Splines
    • 1.124 Diameter Bottom of Splines

    Note: Steering box is not adjusted at the facotry and therefore, it is necessary that the steering box be adjusted upon installation per the instructions as provided on the PDF instruction sheet.

    1965-1991 GM Manual Steering Box Installation Instructions (PDF)

  • Elgin Industries DS791 1971-73 Mustang Inner Tie Rod End
    Elgin Industries DS791 1971-73 Mustang Inner Tie Rod End
    x
                High quality 1971-73 Mustang inner tie rod end.
            
  • 2 Inch Offset Vega Pitman Steering Arm, Drilled for 5/8 Inch Bolt, Zinc Finish
    2 Inch Offset Vega Pitman Steering Arm, Drilled for 5/8 Inch Bolt, Zinc Finish
    x
                These steel replacement Vega pitman steering arms have a 2 inch  offset/drop and work ideally with Saginaw  Vega 140 style steering box.  They have a zinc finish and are durable  enough to hold up on your stock  or custom application. 
    • Steel pitman arm
    • Drilled for 5/8" bolt
    • 5-3/4" Between centers with a 2" drop
    • Fits Saginaw Vega 140 style steering box
    • Vega cross-steering applications
  • Ididit 3000313449 Steering Coupler, 3/4 Inch-36 Spline to 3/4 Inch DD
    Ididit 3000313449 Steering Coupler, 3/4 Inch-36 Spline to 3/4 Inch DD
    x
                

    No-shift columns use 1" DD u-joints, while shift columns use 3/4"-36 spline u-joints. When using the original steering box, the input shaft will need to be cut and modified into a 3/4" DD.

    Steering U-Joints and Couplers Application Chart (GIF)

    Steering Box/Rack/Spline Chart (Link)

    Spline Size (Link)

     

  • IDIDIT 1250280020 Chrome Right Hand Drive Collapsible Steering Column, 28 Inch
    IDIDIT 1250280020 Chrome Right Hand Drive Collapsible Steering Column, 28 Inch
    x
                

    The Ididit Collapsible Series columns are one of the safest products you can install in your vehicle. Combined with the proper collapsible floor mount and underdash mount, this column will sustain impacts better than any standard steering column can, keeping you safe. Collapsible columns include all the same great features as Ididit's Universal Tilt Series columns such as, the unique 8-position tilt, self-canceling turn signals, 4-way flashers and the tandard dress-up kit.

    • RIGHT HAND DRIVE
    • Chrome steel
    • Upper tube 2-¼" diameter
    • Lower tube 2" diameter
    • 8 Position tilt
    • Self canceling turn signal
    • 4 way flasher
    • Standard dress up kit
    • 69 or Newer GM passenger car wheel adaptor
    • 3-7/8 flat plug
    • 1" DD IDIDIT output shaft
    • 100% American made
  • Elgin Industries ES378R 1969-70 Fullsize Chevy Inner Tie Rod End
    Elgin Industries ES378R 1969-70 Fullsize Chevy Inner Tie Rod End
    x
                

    We stock these hard to find replacement tie rods that are a must when rebuilding your classic vehicle.  They will give your 1969-70 Fullsize Chevy overall better handling and a positive feel while cruising the strip.  These inner tie rod ends feature right hand threads.  Our outer tie rod ends are left hand thread and the adjuster sleeve makes the adjustment for toe in by rotating clockwise or counter clockwise.

    • Meets or exceeds factory OEM specifications
    • Overall better handling and a positive feel
    • Right Hand Threads
    • 1969-70 Chevy passenger cars

     

  • Grant 5891 Steering Wheel Puller Kit
    Grant 5891 Steering Wheel Puller Kit
    x
                

    These Grant 3 bolt steering wheel pullers are to be used for pulling original wheels or previously installed Grant wheels from the steering shaft.

    • Easy to use
    • Includes all bolts/hardware necessary
  • Metalflake Steering Wheels, 13 Inch
    Metalflake Steering Wheels, 13 Inch
    x
                

    Give your ride some colorful '60s flare with this three-spoke chrome steering wheel. To attach a horn button, you will need the Grant 3-bolt adapter.

  • Beige Leather Steering Wheel Wrap
    Beige Leather Steering Wheel Wrap
    x
                

    Personalize your 14" Chrome Plated Billet steering wheel with these replacement leather wraps available in beige, gray or red.

    Please Note: These are not universal-fit wraps. They will only fit the following Chrome Plated Billet wheels:

    • 910-5605  'Wings'
    • 910-5606  'T-Style'
    • 910-5608  '4-Slot'
    • 910-5614  'Boomerang'
    • 910-5616  'Trinity'
    • 910-5620  'Banjo'
Goto Previous PagePrevious Page
1 2 3 4 5 ... 14