Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Filter

Page 1 of 5

Products

Power Steering Components

Shop Muscle Car Steering At Speedway Motors

There is no denying that muscle cars are the hottest rides on the street right now. Speedway Motors has the high performance muscle car parts to take you back to the '60s and '70s! Whether you run a Chevy, Ford or Mopar, you can find the right stuff for it here! Similar to your muscle car, Speedway Motors leaves our competitors in the dust when it comes to prices and selection.

Featured Products
  • T-Bird Power Steering Rack and Pinion Fittings, Steel, -6 AN
    T-Bird Power Steering Rack and Pinion Fittings, Steel, -6 AN
    (Part #9104047)
    x
                

    This steel fittings kit will convert your T-bird power rack type rack such as # 910-35341 that utilizes 9/16"-18 and 5/8"-18 o-ring thread fittings to -6 AN. These zinc coated fittings are sold in pairs.

    • Sold as a pair
    • Zinc Finish
    • Steel Construction
    • Converts T-bird style power rack fittings using 9/16"-18 and 5/8"-18 o-ring thread to -6 AN
  • Chrome Power Steering Cap
    $6.99
    Chrome Power Steering Cap
    (Part #6501728)
    x
                Simply snaps on to your GM saginaw power steering pump's filler cap/dipstick.
            
  • Mustang II Power Steering Flow Valve for GM Pump, 2 GPM
    Mustang II Power Steering Flow Valve for GM Pump, 2 GPM
    (Part #91032918)
    x
                

    It is common to use an early GM power steering pump with a Mustang II power rack and pinion. Most who have tried it have found that the steering was twitchy or that it easily darts. This valve reduces the fluid flow from three gallons-per-minute to two gallons-per-minute, which cures the problem. For applications using the O-ring style power steering hoses. Installs in the back side of the pump as shown in the extra photos.

    If converting pump from modern 16mm o-ring to traditional 5/8" inverted flare style hoses, order (1) Adapter Insert 910-32921. 

    910-32918 Instructions (PDF)

  • Power Steering Fitting, -6 AN to 14mm-1.5 O-Ring
    Power Steering Fitting, -6 AN to 14mm-1.5 O-Ring
    (Part #6174824)
    x
                These steel fittings have a straight thread with o-ring on one side and the common AN6 on the other. Common to Ford rack and pinion and others.
            
  • Gates 354470 1967-1970 Mustang Power Steering Pressure Hose
    Gates 354470 1967-1970 Mustang Power Steering Pressure Hose
    (Part #395354470)
    x
                

    These power steering pressure hoses from Gates are authentic reproductions of the originals. They work on 1967-70 Mustang applications and include fittings already assembled.

    1967-70 Mustang power steering hose kit has a pressure line for inverted flare fittings.  Large female inverted flare is 5/8 x 18 IFF and the smaller end is ½ x 20 inverted flare male.  There is also an adapter to reduce the smaller end from ½ x 20 to 3/8 x 24 IFM. 

    • End (1) type: Male inverted flare
    • End (2) type: Female SAE
    • End (1) Diameter: .3125"
    • End (2) Diameter: .375"
    • Length: 20.125"

    Note: These pressure hoses work with Eaton style pumps.

    *Double check "Application" tab to make sure this item will work with your correct engine.

    1964-70 Mustang Power Steering Hose Application Guide (GIF)

  • Gates 361970 1972-76 Impala Power Steering Pressure Return Hose
    Gates 361970 1972-76 Impala Power Steering Pressure Return Hose
    (Part #395361970)
    x
                

    These are Gates brand power steering hose assemblies made to OEM specifications. 

    Fits:

    • 1972-76 B-Body (Impala, Caprice)
  • Power Steering Tank Accessory Bracket
    Power Steering Tank Accessory Bracket
    (Part #91032864)
    x
                
    Power Steering Tank Accessory Bracket
  • Tuff Stuff GM Saginaw Power Steering Pump with Reservoir
    Tuff Stuff GM Saginaw Power Steering Pump with Reservoir
    (Part #91032908)
    x
                These Saginaw power steering pumps from Tuff Stuff come with a new reservoir, billet cap, chrome hardware and new dipstick. Desirable early style 1965-79 pump with threaded and keyed shaft for easy pulley installation. Available in powder coated black or chrome finish. Hoses are available from most local parts stores. 

    Pump has a 3/8" hose barb for return line and a female 5/8"-18 inverted flare fitting for the high pressure outlet. Pulley not included.

    • Saginaw power steering pump with a new reservoir, billet cap, chrome hardware and new dipstick
    • Powder coated black or chrome
    • Keyed shaft for easy pulley intallation
    • Pulleys available in plain, polished, and chrome
    • 6" diameter pulleys not included

    Works well with small block Chevy engine brackets 916-67920 or 913-32902.

Filter

"Muscle Car, Power Steering Components" Page 1 of 5

Page 1 of 5

  • 14mm to Male AN6 Banjo Bolt Fitting for Power Steering Pump
    14mm to Male AN6 Banjo Bolt Fitting for Power Steering Pump
    (Part #6174831)
    x
                

    These power steering adapter fittings are designed to simplify the hose connection on your power steering lines. They are made from quality material and are designed to withstand even the harshest environments. The adapter fittings are the perfect solution for adding new lines or for those tight-fit areas where normal, straight fittings won't fit.

    Banjo Bolt Fitting for Power Steering Pump

    • 14mm to Male AN6 
    • Zinc-plated steel assembly
    • For the pressure connection (outlet) to the pump.
    • 90 Degree
    • Swivel
    • Male Threads
  • Gates 350110 1967-1970 Mustang Power Steering Return Hose Fitting
    Gates 350110 1967-1970 Mustang Power Steering Return Hose Fitting
    (Part #395350110)
    x
                

    These power steering return hose fittings from Gates are furnished separately and work on 1967-70 Mustang applications.  They feature inverted flare threads and a zinc-dichromate plated finish to resist corrosion.

    • Male inverted flare end
    • End (1) Diameter: 3/8"
    • Works with standard 3/8" hose
    • Zinc-dichromate plated finish to resist corrosion

    *Double check "Application" tab to make sure this item will work with your correct engine.

    1964-70 Mustang Power Steering Hose Application Guide (GIF)

  • Gates 353120 1964-1966 Mustang Power Steering Cylinder Hose
    Gates 353120 1964-1966 Mustang Power Steering Cylinder Hose
    (Part #395353120)
    x
                

    These power steering cylinder hoses from Gates are authentic reproductions of the originals. They work on 1964-66 Mustang applications and include fittings already assembled.

    • Male inverted flare ends
    • End diameter: .3125"
    • Length: 9-3/4"

    Note: Two of these hoses are required for Mustang applications.

    1964-70 Mustang Power Steering Hose Application Guide (GIF)

  • O-Ring to Inverted Flare Power Steering Adapter
    O-Ring to Inverted Flare Power Steering Adapter
    (Part #91032921)
    x
                

    If you have a power steering pump using late model style O-ring sealed hoses that you need to adapt to traditional inverted flare hoses, this inverted flare adapter is a simple fix. Simply insert the adapter into the flow control fitting and then install your inverted flare hose.

    Use to convert from 16mm o-ring to 5/8" inverted flare style.

  • Power Steering Fitting, -6 AN to 1/2 Inch-20 O-Ring
    Power Steering Fitting, -6 AN to 1/2 Inch-20 O-Ring
    (Part #6174823)
    x
                These steel fittings have a straight thread with o-ring on one side and the common AN6 on the other. Common to Ford rack and pinion and others.
            
  • Power Steering Hose Kit, -8 AN Reservoir
    Power Steering Hose Kit, -8 AN Reservoir
    (Part #91032950)
    x
                

    This power steering hose kit is just what you need to plumb your driver's side remote reservoir power steering set up. The AN 8 hose kit includes 4' of AN 6 high pressure hose, 5' of AN 6 blue aeroquip hose and 3' of AN8 blue aeroquip hose. One 45° AN 6 and one 90° AN 6 fittings are included as well as an AN 6 straight brass push-on and one AN 6 and two AN 8 90° push-on hose ends.

    NOTE: Does NOT contain steering box fittings 

  • 1958-64 Chevy Power Steering Conversion Kit
    1958-64 Chevy Power Steering Conversion Kit
    (Part #91032580)
    x
                

    You get a new 500 series power steering box, new centerlink, new pitman and idler arm. This is a straight bolt-in conversion, although '58-'60 cars need to order the 910-32582 idler arm adapter. Steering box uses inverted flare fittings, 11/16" fine on the pressure side and 5/8" fine thread on the return side. Has a 3/4" 30-spline input shaft.

    Note:  Some applications require slight modification to the radiator tank to clear the steering box.

    1958-1964 Chevy Power Steering Conversion Installation Instructions 

  • Steel Power Steering Box Adapter Fitting 16mm-1.5 IFM/-6 AN, 80-Up GM
    Steel Power Steering Box Adapter Fitting 16mm-1.5 IFM/-6 AN, 80-Up GM
    (Part #6174806)
    x
                

    Steel 16mm-1.5 IFM power steering box to -6 AN hose adapter fitting.

    Note: Inverted flare are used on most GM steering boxes through 1977. O-ring fittings are used later model GM metric boxes from 1978-up.

  • Power Steering Tank Accessory Bracket
    Power Steering Tank Accessory Bracket
    (Part #91032864)
    x
                
    Power Steering Tank Accessory Bracket
  • Gates 353100 1964 Mustang Power Steering Pressure Hose
    Gates 353100 1964 Mustang Power Steering Pressure Hose
    (Part #395353100)
    x
                

    These power steering pressure hoses from Gates are authentic reproductions of the originals. They work on 1964 Mustang applications and include fittings already assembled.

    • Male inverted flare ends
    • End (1) diameter: 1/4"
    • End (2) diameter: 3/8"
    • Length: 42.5"

    Note: These pressure hoses work with Ford style pumps.

    *Double check "Application" tab to make sure this item will work with your correct engine.

    1964-70 Mustang Power Steering Hose Application Guide (GIF)

  • Gotta Show 131101 Mustang/T-Bird Rack & Pinion Power Steering Hose Kit
    Gotta Show 131101 Mustang/T-Bird Rack & Pinion Power Steering Hose Kit
    (Part #6174835)
    x
                

    These stainless steel braided power steering hose kits will connect 1984-88 T-Bird and 1979-93 Mustang racks to most Ford or GM style internal reservoir power steering pumps. The hoses provide a custom look without the need to buy any additional parts. This kit is designed for drivers side pumps and may require hoses to be trimmed to length.

    The kit includes:

    • (2) 24" stainless steel braided hoses with 90° ends installed (rack end)
    • (1) Banjo bolt assembly for the pressure connection to the pump with 5/8" or 16mm threads
    • (1) Custom clamp cover for the return hose which connects to a hose nipple on the pump
    • Rack fittings in this kit are one each, 16mm or 5/8"-18, and one each, 14mm or 9/16"-18

    617-4835 Instructions (PDF) 

  • Gates 361970 1972-76 Impala Power Steering Pressure Return Hose
    Gates 361970 1972-76 Impala Power Steering Pressure Return Hose
    (Part #395361970)
    x
                

    These are Gates brand power steering hose assemblies made to OEM specifications. 

    Fits:

    • 1972-76 B-Body (Impala, Caprice)
  • Gates 353000 1967-1970 Mustang Power Steering Return Hose
    Gates 353000 1967-1970 Mustang Power Steering Return Hose
    (Part #395353000)
    x
                

    These power steering return hoses from Gates are cut to fit and work on 1967-70 Mustang applications.

    • Male inverted flare end
    • End (1) Diameter: .375"
    • Length: 51.75"

    *Double check "Application" tab to make sure this item will work with your correct engine.

    1964-70 Mustang Power Steering Hose Application Guide (GIF)

  • GM Power Steering Pump With Chrome Reservoir
    GM Power Steering Pump With Chrome Reservoir
    (Part #91032919)
    x
                

    We offer this Saginaw power steering pump with a new reservoir, billet cap, chrome hardware and new dipstick. Desirable early style 1965-79 pump with threaded and keyed shaft for easy pulley installation. Available in chrome. Hoses available from local parts stores.

    Pump has a 3/8" hose barb for return line and a female 5/8"-18 inverted flare fitting for the high pressure outlet. Pulley not included. Use bracket available below.

    Pulleys available separately. AN6 fittings shown for racing applications. 

  • Power Steering Hose Kit for 1982-88 T-Bird Steering Rack to GM Pump
    Power Steering Hose Kit for 1982-88 T-Bird Steering Rack to GM Pump
    (Part #91032535)
    x
                

    Our standard power steering hose assemblies are an inexpensive alternative to the more costly stainless steel braided hose kits. This set adapts a 1982-1988 T-Bird/Cougar rack or our 91034340-POW rack to a GM style pump. Return hose will normally need to be cut to length.

    The pressure line in this kit has an inverted flare fitting at the pump end along with a 14mm O-ring fitting on the rack end. It also comes with an adaptor so that it can work with an O-ring style (metric) pump fitting. We suggest using power steering pumps 91032922-GM or 910-32908.

    Kit includes:

    • Adapter for the GM pump, to allow it to work with both metric O-ring and standard inverted flare style threads on the power steering pump fitting.
    • The fittings that go into the 1982-1988 T-bird rack which are 14mm O-ring (high pressure) and 16mm O-ring (low pressure return) with the smaller O-ring fitting hose end being the pressure side for the rack.

     

    910-32535 Instructions (PDF)

    91032535 CPP Instructions (PDF) 

  • Gates 352300 1964-1968 Chevelle Power Steering Hose
    Gates 352300 1964-1968 Chevelle Power Steering Hose
    (Part #395352300)
    x
                

    These are Gates brand power steering hose assemblies made to OEM specifications are authentic reproductions of the originals. They work on 1964-68 Chevelle applications and include fittings already assembled.

    • End (1) type: Male inverted flare
    • End (2) type: Male inverted flare
    • End (1) Diameter: .375"
    • End (2) Diameter: .4375"
    • Length: 27.375"
    • 45° IFM threads
    • 1964-68 Chevelle
      • 283 and 327 c.i. engines 

     

  • Power Steering Hose Kit, -10 AN Reservoir
    Power Steering Hose Kit, -10 AN Reservoir
    (Part #91032960)
    x
                

    This power steering hose kit is just what you need to plumb your driver's side remote reservoir power steering set up. The AN 10 hose kit includes 4' of AN 6 high pressure hose, 5' of AN 6 blue aeroquip hose and 3' of AN 10 blue aeroquip hose  One 45° AN 6 and one 90° AN 6 fittings are included as well as an AN 6 straight brass push-on and one AN 6 and two AN 10 90° push-on hose ends.

    NOTE: Does NOT contain steering box fittings 

  • Steel Power Steering Box Adapter Fitting 18mm-1.5 IFM/-6 AN, 80-Up GM
    Steel Power Steering Box Adapter Fitting 18mm-1.5 IFM/-6 AN, 80-Up GM
    (Part #6174808)
    x
                

    Steel 18mm-1.5 IFM power steering box to -6 AN hose adapter fitting.

    Note: Inverted flare are used on most GM steering boxes through 1977. O-ring fittings are used later model GM metric boxes from 1978-up.

  • Gates 350120 1964-1966 Mustang Power Steering Return Hose Fitting
    Gates 350120 1964-1966 Mustang Power Steering Return Hose Fitting
    (Part #395350120)
    x
                

    These power steering return hose fittings from Gates are furnished separately and work on 1964-66 Mustang applications.  They feature inverted flare threads and a zinc-dichromate plated finish to resist corrosion.

    • Male inverted flare end
    • End (1) Diameter: 3/8"
    • Works with standard 3/8" hose
    • Zinc-dichromate plated finish to resist corrosion

    *Double check "Application" tab to make sure this item will work with your correct engine.

    1964-70 Mustang Power Steering Hose Application Guide (GIF)

  • Sweet Mfg. 305-40336 1300 PSI V-Belt Power Steering Pump w/ Reservoir
    Sweet Mfg. 305-40336 1300 PSI V-Belt Power Steering Pump w/ Reservoir
    (Part #91040336)
    x
                

    These steel power steering pumps come with a V-belt style pulley and integral reservoir. These pulleys are popular for use on late models and IMCA modifieds. Comes with AN6 pressure fitting. These power steering pumps feature 1300 psi operating pressure.

    Mounting brackets available for head or block mounting.

    • 1300 psi operating pressure
    • Steel housing with integral reservoir
    • 6" diameter V-belt pulley
    • AN 6 inlet and outlet
    • Mounting bracket not included
Goto Previous PagePrevious Page
1 2 3 4 5