Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Muscle Car Electrical Wiring & Lights At Speedway Motors

Speedway Motors is your one stop shop for muscle wiring and lighting. Make wiring your hot rod simple with easy-to-use wiring harnesses and step by step instructions. Finish off your muscle car with specialty headlights, LED dome lights, and LED tail lights. Find anything from various switches and relays to hidden radio antennas and let Speedway Motors eliminate any and all of your American muscle car electrical system problems!

"Muscle Car, Lighting, Exterior" Page 1 of 4

  • 1968 Belair/Biscayne LED Tail/Stop Lights
    1968 Belair/Biscayne LED Tail/Stop Lights
    SKU-91137075
    x
                

    Face it, it's hard to see those tail lights on older cars. Now is the time to change out those broken or faded tail lights for new LED versions. 

    • 40 Super Bright LEDS
    • Polycarbonate Lens
    • Epoxy Coated, Fully Sealed Electronics, 1157 Plug
    • Solid State Circuit Boards Designed for 7.7 - 14.0 VDC

     

  • 1957 Chevy LED Tail Light Conversion Kit
    1957 Chevy LED Tail Light Conversion Kit
    SKU-91131040
    x
                The 1957 Chevy cars were not known to have very bright or visible tail lights. The cure is the addition of LED conversion kits. 

    These replace old 1157 style bulbs with 14 LED bulbs that are much brighter, don't put out much heat and last up to 100,000 hours. Stainless steel hardware and easy 30 minute installation.

    1957 Chevy LED Tail Light Conversion Instructions (pdf)

  • EMPI 16-2059 Bullet Light Assembly, Convex Red, Each
    EMPI 16-2059 Bullet Light Assembly, Convex Red, Each
    SKU-1412059
    x
                

    EMPI Bullet lights feature a high power 12-Volt 50 watt halogen bulb with a mirror finish reflector. The compact (approximately 3-1/2" tall by 2-1/2" diameter) housing is made of precision machined aluminum.

    • Bullet Light w/ Red Lens
    • Precision machined aluminum housing
    • Mounts on flat or slightly rounded surfaces
    • Sold Each

  • 1955 Chevy LED Tail Light Conversion Kit
    1955 Chevy LED Tail Light Conversion Kit
    SKU-91131030
    x
                The 1955 Chevy cars were not known to have very bright or visible tail lights. The cure is the addition of LED tail light conversion kits. 

    These replace old 1157 style bulbs with 14 LED bulbs that are much brighter, don't put out much heat and last up to 100,000 hours. Stainless steel hardware and easy 30 minute installation.

    1955 Chevy LED Tail Light Conversion Instructions (pdf)

  • Replacement 12 Volt Vintage Style Fog Light Bulb, Amber Lens
    Replacement 12 Volt Vintage Style Fog Light Bulb, Amber Lens
    SKU-911364003
    x
                

    These vintage style fog lights are replacement for our fog light assemblies (91130653, 91130654, 911364007, and 911364008).  They feature an amber lens, and are perfect for your vintage street rod or custom ride.

    • Replacement for our 12 volt fog light assemblies
    • Amber lens
    • Vintage Lens Pattern Design From the 1940's
    • Quartz Halogen with Replaceable H3 Bulb, 35 Watt

     

  • 1968 Caprice/Impala LED Tail/Stop Lights
    1968 Caprice/Impala LED Tail/Stop Lights
    SKU-91137074
    x
                

    Face it, it's hard to see those tail lights on older cars. Now is the time to change out those broken or faded tail lights for new LED versions. 

    • 40 Super Bright LEDS
    • Polycarbonate Lens
    • Epoxy Coated, Fully Sealed Electronics, 1157 Plug
    • Solid State Circuit Boards Designed for 7.7 - 14.0 VDC

     

  • Stainless Steel Tear Drop 12 Volt Fog Light, Amber Lens
    Stainless Steel Tear Drop 12 Volt Fog Light, Amber Lens
    SKU-91130653
    x
                These tear drop style fog lights feature a beautiful stainless steel housing with  an Amber lens.  They also include adjustable mounting and a replaceable  H3 35 watt bulb, and are perfect for your vintage street rod or custom  ride. 
    • Stainless steel Housing With Universal Ball & Cup Adjustable Mounting
    • Quartz Halogen with Replaceable H3 Bulb, 35 Watt
  • 1156 LED Tail Light Bulb, 1 Inch, Red
    1156 LED Tail Light Bulb, 1 Inch, Red
    SKU-91131020
    x
                

    These LED tail light bulbs put out the light you're after, but don't get hot like normal bulbs. 1156 bulbs have the pins straight across and a single contact on the plug. The bulbs appear to be clear, but are red when illuminated.

    LED bulbs are quite efficient and use such small amounts of power that a normal flasher will not work correctly. The use of LED's will almost always require the use of a special "low load" flasher like our 910-64110 (2-prong) or 910-64112 (3-prong.) LED lights require so little “juice” that the conventional flasher can’t cope.

    These LED bulbs are made to serve as a conversion replacement for old damaged or missing original bulbs.  They essentially work the same but with greater quality and brighter, clearer light. They can be used as a running light, a brake light, or both.

    • 12 Volt Bulb
    • 1156 bulbs have the pins straight across and a single contact on the plug
    • Red when illuminated
    • 1" Diameter
    • Efficient and use such small amounts of power
    • Requires the use of a special "low load" flasher like our 910-64110 (2-prong) or 910-64112 (3-prong)
  • 1964-66 Mustang LED Tail Lights
    1964-66 Mustang LED Tail Lights
    SKU-91137080
    x
                

    Face it, it's hard to see those tail and brake lights on older Mustangs. Now is the time to change out those broken or faded lights for new LED versions. 

    • 68 Super Bright LEDS
    • Polycarbonate Lens
    • Epoxy Coated, Fully Sealed Electronics, 1157 Plug
    • Solid State Circuit Boards Designed for 7.7 - 14.0 VDC

     

  • EMPI 9414 Cal-Look Amber Turn Signals, 2-1/2 Inch Diameter, Pair
    EMPI 9414 Cal-Look Amber Turn Signals, 2-1/2 Inch Diameter, Pair
    SKU-1419414
    x
                

    Complete with housing, these turn signal assemblies feature single filament 12-Volt bulbs, seals and wire for proper installation.  The simple design allows these signals to be universally mounted as well. 

    • Single filament 12-Volt bulbs
    • Amber lens color
    • 2-1/2" diameter
    • Includes housing, seal, wiring
    • Sold as a pair
  • Technostalgia 6503 1957 Chevy LED Combo Lamp
    Technostalgia 6503 1957 Chevy LED Combo Lamp
    SKU-91131042
    x
                                

    Improve safety and visibility in your 1957 Chevy with this bolt-in LED combination light. This single amber LED fists in the original signal lamp location on the grille bar and provides three lighting functions: a high-intensity daytime running light and turn signal, and a reduced intensity park light. 

    This LED works with all available 1957 Chevy park light lenses and has a custom-designed inner lens to properly focus the intense light.  

  • 1967-68 Mustang LED Tail/Stop Lights
    1967-68 Mustang LED Tail/Stop Lights
    SKU-91137081
    x
                

    Face it, it's hard to see those tail lights on older cars. Now is the time to change out those broken or faded lights for new LED versions. 

    • 68 Super Bright LEDS
    • Polycarbonate Lens
    • Epoxy Coated, Fully Sealed Electronics, 1157 Plug
    • Solid State Circuit Boards Designed for 7.7 - 14.0 VDC

     

  • 1965 Impala LED Back-Up Lights
    1965 Impala LED Back-Up Lights
    SKU-91137073
    x
                

    Face it, it's hard to see those tail lights on older cars. Now is the time to change out those broken or faded tail lights for new LED versions. 

    • 26 Super Bright LEDS
    • Polycarbonate Lens
    • Epoxy Coated, Fully Sealed Electronics, 1156 Plug
    • Solid State Circuit Boards Designed for 7.7 - 14.0 VDC

     

  • 1956 Chevy Car Replacement Parking Light Lens, Amber
    1956 Chevy Car Replacement Parking Light Lens, Amber
    SKU-91131065
    x
                

    Replace those old, damaged, or missing lenses with these OEM reproduction park lenses.  They come in the original amber color for your 1956 Chevy passenger car. 

    • OEM reproduction
    • 1956 Chevrolet Passenger Car
    • Amber Plastic Parking Light Lens

     

  • LED 1157 Tail Light Bulb, 1 Inch, Red
    LED 1157 Tail Light Bulb, 1 Inch, Red
    SKU-91131022
    x
                

    These LED tail light bulbs put out the light you're after, but don't get hot like normal bulbs. 1157 bulbs have staggered pins and 2 contacts on the plug. The bulbs appear to be clear, but are red when illuminated.

    LED taillight bulbs are quite efficient and use such small amounts of power that a normal flasher will not work correctly. The use of LEDs will almost always require the use of a special "low load" flasher like our 910-64110 (2-prong) or 910-64112 (3-prong.)

     

  • 1964 Impala LED Back-Up Lights
    1964 Impala LED Back-Up Lights
    SKU-91137071
    x
                

    Face it, it's hard to see those tail lights on older cars. Now is the time to change out those broken or faded tail lights for new LED versions. 

    • 26 Super Bright LEDS
    • Polycarbonate Lens
    • Epoxy Coated, Fully Sealed Electronics, 1156 Plug
    • Solid State Circuit Boards Designed for 7.7 - 14.0 VDC

     

  • 1963 Impala LED Tail/Stop Lights
    1963 Impala LED Tail/Stop Lights
    SKU-91137068
    x
                

    Face it, it's hard to see those tail lights on older cars. Now is the time to change out those broken or faded tail lights for new LED versions. 

    • 40 Super Bright LEDS
    • Polycarbonate Lens
    • Epoxy Coated, Fully Sealed Electronics, 1157 Plug
    • Solid State Circuit Boards Designed for 7.7 - 14.0 VDC

     

  • Replacement 12 Volt Vintage Style Fog Light Bulb, Clear Lens
    Replacement 12 Volt Vintage Style Fog Light Bulb, Clear Lens
    SKU-911364004
    x
                

    These vintage style fog lights are replacement for our fog light assemblies (91130653, 91130654, 911364007, and 911364008).  They feature a clear lens, and are perfect for your vintage street rod or custom ride.

    • Replacement for our 12 volt fog light assemblies
    • Clear lens
    • Vintage Lens Pattern Design From the 1940's
    • Quartz Halogen with Replaceable H3 Bulb, 35 Watt
  • 1955 Chevy Tail Light Lens, Passenger Car
    1955 Chevy Tail Light Lens, Passenger Car
    SKU-91131060
    x
                

    These reproduction 1955 Chevy car incandescent tail light lenses are an OEM direct fit with the original "Guide" script.  Choose from a standard lens or classic Lynx-Eye blue dot.  Dot gives a bright lavender appearance when brake light comes on.

    • Original replacements
    • 1955 Chevy car
    • Red Plastic Lens with "Guide"
    • GM Restoration Licensed Product
    • Choose standard or blue dot
    • Sold each

     

  • Delta 01-1179-50X Classic 7 In. Headlights w/Xenon Bulb, Replace H6024
    Delta 01-1179-50X Classic 7 In. Headlights w/Xenon Bulb, Replace H6024
    SKU-9101179
    x
                

    Delta developed Classic headlight replacements for the stock headlights. This headlight is powered by the Xenon Gas filled replaceable bulbs H4 60/55 Watt which will outperform stock headlight 4 to 1. The Headlights feature European prismatic lead-crystal lens, vacuum metalized steel reflector, Xenon bulbs, rubber boot protecting the optics from moisture and elements. 7" classic with xenon - replaces H6024.

    • Bulb color: Clear
    • Wattage: 55/60w
    • Light Source: Xenon
    • Mount Type: Headlight Ring
    • Finish: Black
    • Housing Material: Metal
    • Set includes:
      • (2) headlights
      • (2) H4 Xenon bulbs 60/55 Watt
      • (2) rubber boots
      • Hi/Lo Beam

     

  • Replacement 6 Volt Fog Light Bulb, Clear
    Replacement 6 Volt Fog Light Bulb, Clear
    SKU-911364006
    x
                These vintage style fog lights are replacement for our fog light assemblies (91130653, 91130654, 911364007, and 911364008).  They feature a clear lens, and are perfect for your vintage street rod or custom  ride. 
    • Replacement for our 6 volt fog light assemblies
    • Clear lens
    • Vintage Lens Pattern Design From the 1940's
    • Quartz Halogen with Replaceable H3 Bulb, 35 Watt
  • Delta 01-1189-SMDA Classic 7 Inch Headlights w/Xenon Bulb/LED Blinkers
    Delta 01-1189-SMDA Classic 7 Inch Headlights w/Xenon Bulb/LED Blinkers
    SKU-9101189
    x
                

    Delta developed Classic headlight replacements for the stock headlights. This headlight is powered by the Xenon Gas filled replaceable bulbs H4 60/55 Watt which will outperform stock headlight 4 to 1. The Headlights feature European prismatic lead-crystal lens, vacuum metalized steel reflector, Xenon bulbs, rubber boot protecting the optics from moisture and elements.  Delta Classic 7" w/xenon and turn signal.

    • Bulb color: Clear
    • Wattage: 55/60w
    • Light Source: Xenon
    • Mount Type: Headlight Ring
    • Finish: Black
    • Housing Material: Metal
    • Set includes:
      • (2) headlights
      • (2) H4 Xenon bulbs 60/55 Watt
      • (2) rubber boots
      • Built-in high output amber LED turn signals
      • Hi/Lo Beam

     

  • Replacement 6 Volt Vintage Style Fog Light Bulb, Amber Lens
    Replacement 6 Volt Vintage Style Fog Light Bulb, Amber Lens
    SKU-911364005
    x
                

    These vintage style fog light bulbs are replacements for our fog light assemblies (91130653, 91130654, 911364007, and 911364008).  They feature a clear lens, and are perfect for your vintage street rod or custom ride.

    • Replacement for our 6 volt fog light assemblies
    • Amber lens
    • Vintage Lens Pattern Design From the 1940's
    • Quartz Halogen with Replaceable H3 Bulb, 35 Watt
  • 1964 Impala LED Tail/Stop Lights
    1964 Impala LED Tail/Stop Lights
    SKU-91137070
    x
                

    Face it, it's hard to see those tail lights on older cars. Now is the time to change out those broken or faded tail lights for new LED versions. 

    • 41 Super Bright LEDS
    • Polycarbonate Lens
    • Epoxy Coated, Fully Sealed Electronics, 1157 Plug
    • Solid State Circuit Boards Designed for 7.7 - 14.0 VDC

     

  • 1157 LED Tail Light Bulb, 1-3/4 Inch, Red
    1157 LED Tail Light Bulb, 1-3/4 Inch, Red
    SKU-91131024
    x
                

    These LED tail light bulbs put out the light you're after, but don't get hot like normal bulbs. 1157 bulbs have staggered pins and 2 contacts on the plug. The tail light bulbs appear to be clear, but are red when illuminated.

    LED bulbs are quite efficient and use such small amounts of power that a normal flasher will not work correctly. The use of LED's will almost always require the use of a special "low load" flasher like our 910-64110 (2-prong) or 910-64112 (3-prong.) 

  • 1965 Impala LED Tail/Stop Lights
    1965 Impala LED Tail/Stop Lights
    SKU-91137072
    x
                

    Face it, it's hard to see those tail lights on older cars. Now is the time to change out those broken or faded tail lights for new LED versions. 

    • 40 Super Bright LEDS
    • Polycarbonate Lens
    • Epoxy Coated, Fully Sealed Electronics, 1157 Plug
    • Solid State Circuit Boards Designed for 7.7 - 14.0 VDC

     

  • 1959 Impala LED Tail Lights - Retrofit - No Lens
    1959 Impala LED Tail Lights - Retrofit - No Lens
    SKU-91137062
    x
                

    Face it, it's hard to see those tail lights on older cars. Now is the time to change out those broken or faded tail lights for new LED versions.

    • 98 Super Bright LEDS
    • Circuit Board Only to Retrofit Existing Lens
    • Epoxy Coate
    • Fully Sealed Electronics
    • 1157 Plug
    • Solid State Circuit Boards designed for 7.7 - 14.0 VDC
  • 1958-60 Chevy LED Backup Lights
    1958-60 Chevy LED Backup Lights
    SKU-91137061
    x
                Face it, it's hard to see those tail lights on older cars. Now is the time to change out those broken or faded tail lights for new LED versions. 
            
  • Stainless Steel Tear Drop 12 Volt Fog Light, Clear Lens
    Stainless Steel Tear Drop 12 Volt Fog Light, Clear Lens
    SKU-91130654
    x
                These tear drop style fog lights feature a beautiful stainless steel  housing with  a clear lens.  They also include adjustable mounting and a  replaceable  H3 35 watt bulb, and are perfect for your vintage street  rod or custom  ride. 
    • Stainless steel Housing With Universal Ball & Cup Adjustable Mounting
    • Quartz Halogen with Replaceable H3 Bulb, 35 Watt
  • 1968 Camaro LED Back-Up Lights
    1968 Camaro LED Back-Up Lights
    SKU-91137077
    x
                

    Face it, it's hard to see those tail lights on older cars. Now is the time to change out those broken or faded tail lights for new LED versions. 

    • 68 Camaro Back Up Light
    • 20 Super Bright LEDS
    • Polycarbonate Lens
    • Epoxy Coated, Fully Sealed Electronics, 1156 Plug
    • Solid State Circuit Boards Designed for 7.7 - 14.0 VDC
    • Sold Each

     

  • 1955 Chevy L.E.D. Back-Up Lights
    1955 Chevy L.E.D. Back-Up Lights
    SKU-91131032
    x
                The 1955 Chevy cars were not known to have very bright or visible back-up lights. The cure is the addition of L.E.D. conversion kits. 

    These replace old 1157 style bulbs with 14 L.E.D. bulbs that are much brighter, don't put out much heat and last up to 100,000 hours. Stainless steel hardware and easy 30 minute installation.

    911-31032 Instructions (pdf)

  • 1956 Chevy LED Tail Light Conversion Kit
    1956 Chevy LED Tail Light Conversion Kit
    SKU-91131035
    x
                The 1956 Chevy cars were not known to have very bright or visible tail lights. The cure is the addition of LED conversion kits. 

    These replace old 1157 style bulbs with 14 LED bulbs that are much brighter, don't put out much heat and last up to 100,000 hours. Stainless steel hardware and easy 30 minute installation.

    1956 Chevy LED Tail Light Conversion Instructions (pdf)

  • 1156 LED Tail Light Bulb, 1 Inch, Amber
    1156 LED Tail Light Bulb, 1 Inch, Amber
    SKU-91131021
    x
                

    These LED tail light bulbs put out the light you're after, but don't get hot like normal bulbs. 1156 bulbs have the pins straight across and a single contact on the plug. The bulbs appear to be clear, but are amber when illuminated.

    LED bulbs are quite efficient and use such small amounts of power that a normal flasher will not work correctly. The use of LED's will almost always require the use of a special "low load" flasher like our 910-64110 (2-prong) or 910-64112 (3-prong.)

  • 1957 Chevy Car Replacement Parking Light/Tail Light Lenses
    1957 Chevy Car Replacement Parking Light/Tail Light Lenses
    SKU-91131070
    x
                

    Replace those old, damaged, or missing parking light and tail light lenses with these OEM reproduction lenses.  They come in the original clear, amber, or red color for your 1957 Chevy passenger car. 

    • OEM reproduction
    • 1957 Chevrolet Passenger Car
    • Plastic Parking Light or Tail light Lens
    • Choose among an amber or clear park lens or red rear lens

     

  • Delta 01-1129-50X 5-3/4 Inch Headlights w/Xenon Bulb, Hi Beam
    Delta 01-1129-50X 5-3/4 Inch Headlights w/Xenon Bulb, Hi Beam
    SKU-91011129
    x
                

    Delta developed a 5 ¾ xenon high beam headlight replacements for the sealed beam which outperform any stock headlights 4 to1. This kit features lead-crystal prismatic glass lens, vacuum metalized steel reflectors and silicon boot with vents to seal from dust and moisture. Delta 5-3/4" head light with xenon bulb.  Replaces H5001.

    • Replaces H5001
    • Bulb color: Clear
    • Wattage: 60
    • Light Source: Xenon
    • Mount Type: Factory
    • Finish: Black
    • Housing Material: Metal
    • Set includes:
      • (2) headlights
      • (2) H4 Xenon bulbs 60 Watt
      • (2) rubber boots
      • Hi Beam
  • Replacement Lens for Tri-Bar Headlights 91101004
    Replacement Lens for Tri-Bar Headlights 91101004
    SKU-91101005
    x
                

    These replacement tri-bar headlight lens feature a 7" diameter. Curved lens is fluted for superior driving vision. They are replacement for our tri-bar headlight assemblies (91101004).

    • 7" diameter
    • Curved lens is fluted for superior driving vision
    • Replacement for tri-bar headlight (91101004)
  • 1959 Impala LED Tail Light Lenses
    1959 Impala LED Tail Light Lenses
    SKU-91137064
    x
                Face it, it's hard to see those tail lights on older cars. Now is the time to change out those broken or faded tail lights for new LED versions. 
            
  • Delta 01-1149-50X Euro 7 Inch Headlight w/ Xenon Bulb, Hi/Lo Beam
    Delta 01-1149-50X Euro 7 Inch Headlight w/ Xenon Bulb, Hi/Lo Beam
    SKU-9101149
    x
                

    This DOT photometrically perfect European optics will outperform any stock headlights 4 to1. The headlights feature lead-crystal prismatic glass lens, vacuum metalized steel reflectors and silicone boot with vents to seal from dust and moisture.

    • Lens color: Clear
    • Bulb color: Clear
    • Wattage: 55/60w
    • Light Source: Xenon
    • Mount Type: Headlight Ring
    • Finish: Black
    • Housing Material: Metal
    • Lens Material: Lead Crystal
    • Size: 7"
    • Set includes:
      • (2) headlights
      • (2) H4 Xenon bulbs 60/55 Watt
      • (2) rubber boots
  • 1967 Camaro RS LED Tail/Stop Lights
    1967 Camaro RS LED Tail/Stop Lights
    SKU-91137076
    x
                

    Face it, it's hard to see those tail and brake lights on older cars. Now is the time to change out those broken or faded lights for new LED versions. 

    • 40 Super Bright LEDS
    • Polycarbonate Lens
    • Epoxy Coated, Fully Sealed Electronics, 1157 Plug
    • Solid State Circuit Boards Designed for 7.7 - 14.0 VDC

     

  • 1157 LED Tail Light Bulb, 1-3/4 Inch, Amber
    1157 LED Tail Light Bulb, 1-3/4 Inch, Amber
    SKU-91131025
    x
                

    These LED tail light bulbs put out the light you're after, but don't get hot like normal bulbs. 1157 bulbs have staggered pins and 2 contacts on the plug. The tail light bulbs appear to be clear, but are amber when illuminated.

    LED bulbs are quite efficient and use such small amounts of power that a normal flasher will not work correctly. The use of LED taillights will almost always require the use of a special "low load" flasher like our 910-64110 (2-prong) or 910-64112 (3-prong.) 

Goto Previous PagePrevious Page
1 2 3 4