Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Filter

Page 1 of 5

Products

Ignition Coils

Speedway Motors has all the essential performance ignition components and accessories muscle car owners crave! We stock everything from low-resistance spark plugs & wires and HEI distributors to ignition coils and MSD ignition control boxes. Our great selection from quality brands is why Speedway Motors is the only place to get your performance muscle car ignition parts.

Featured Products
  • MSD 5526 GM Dual Connector Coil, Street Fire
    MSD 5526 GM Dual Connector Coil, Street Fire
    (Part #5475526)
    x
                Street Fire will introduce two new coils; one for the Ford TFI systems and another for the GM Dual Connector Coils. These new coils mount directly in place of the factory coils and accept the factory connectors. Spark energy is increased thanks to improved materials and windings that were specd by MSD engineering.

    Installation Instructions (PDF)

    • PerTronix 40001 Flame-Thrower Coil, Chrome
      PerTronix 40001 Flame-Thrower Coil, Chrome
      (Part #44745001)
      x
                  

      The hotter the spark, the easier your engine will start, and this 40,000 volt coil is just the ticket to a quick start! Its higher voltage allows larger spark plug gaps for added power, smoother response and better fuel economy. These coils are internally resisted so they are compatible with many inductive ignition systems.  

      • Smooth chrome finish 
      • 40,000 volts
      • For use with 12 volt inductive ignition systems.
      • 1.5 Ohm primary resistance
      • Legal in all 50 states and Canada
    • MSD 8242 Ford Coil on Plug SOHC 4.6L And 5.4L 2V Single
      MSD 8242 Ford Coil on Plug SOHC 4.6L And 5.4L 2V Single
      (Part #5478242)
      x
                  The improved spark energy and voltage of MSDs Blaster 2 Coils, combined with reliability, have made them a favorite for performance enthusiasts. Whether firing a restored BOSS 429 or a Saturday night circle tracker, the Blaster 2 has always gotten the job done. MSD is excited to offer Blaster coils for late model Ford engines with Coil-on-Plug technology! The new Blaster CoPs are designed as a direct bolt-in replacement coil for many SOHC Modular Motors. The housing and installation are the same as the factory, but thats where the similarity ends. Inside the MSD red housing, engineers specd better material to assemble the primary and secondary windings.  The Coil-on-Plug design of the Blaster CoPs puts the spark energy right out of the coil and across the plug gap to improve the combustion and output of the engine. The Blaster 2 CoPs are available individually or as a complete set of eight.
      • 1999-2004 Fits 4.6L and 5.4L SOHC 2V
      • Improved spark energy and voltage output
      • Patented winding design and materials
      • Direct bolt-in to factory connectors
      • Factory replacement coil with improved spark energy and voltage.
      • .51 ohms
      • 5.7K ohms
      • 1.7 mH
      • 100 mA
      • 750 us
      • 38 mj
      • 25KV
    • MSD 8401 HEI Coil Conversion
      $39.99
      MSD 8401 HEI Coil Conversion
      (Part #5478401)
      x
                  

      The modified HEI Dust Cover allows you to remove the stock HEI coil in your distributor cap, and replace it with an externally mounted coil such as the Blaster 2. Designed to be installed on stock HEI distributor caps with no modification.

      Instruction Sheet for 547-8401 (pdf)

      MSD Rebate (Link)

    • MSD 84033 HEI Coil Wire, Blaster 2, SC, Black
      MSD 84033 HEI Coil Wire, Blaster 2, SC, Black
      (Part #54784033)
      x
                  18 long, 90° terminals and boots are installed on both sides to connect to an HEI style terminal. A Power Tower is also supplied to adapt a socket style cap.
      • Coil Wire, Super Conductor
    • Chrome Coil Mounting Bracket
      Chrome Coil Mounting Bracket
      (Part #91017490)
      x
                  These chrome coil mounting brackets fit over stock coils. Adjustable from 2-1/8" to 2-5/16" with slight modification. 
              
    • MSD 8214 Coil Ballast Resistor 0.8 ohm
      MSD 8214 Coil Ballast Resistor 0.8 ohm
      (Part #5478214)
      x
                  For use with an MSD Blaster Coil when connected to a stock points ignition system.
      • Use with older points style ignitions
    • MSD 88867 LS Coil Harness
      $53.99
      MSD 88867 LS Coil Harness
      (Part #54788867)
      x
                  This harness has been made by MSD to correct a check engine light issue that can arise in vehicles using the MSD LS Coil Packs on their engines. This harness will supply additional battery voltage to the coils in order to fire the coils properly and not drain other engine systems of power. This is necessary due to the varying wire gauges used on production vehicles.

      Installation Instructions (PDF)

      • Corrrects check engine light

    Filter

    "Muscle Car, Ignition Coils" Page 1 of 5

    Page 1 of 5

    • MSD 29711 Atomic LS Coil Covers - LS1, LS6, Black
      New
      MSD 29711 Atomic LS Coil Covers - LS1, LS6, Black
      (Part #54729711)
      x
                  

       If you desire a clean and customized look to your engine compartment, our new Atomic LS coil covers are designed to fit over the valve covers and coil assemblies to effectively hide the coil packs and wiring. The cast aluminum covers align with the Atomic Smart Fuel Rail assemblies and provide a completely smooth contoured finish to the edge of the valve cover. The Atomic Coil Covers will work with OEM coils as well as MSD's Multiple Sparking Coils.

      • Fits over valve covers and coil assemblies
      • Smooth Contoured Finish
      • Works with OEM coils and MSD's Multiple Sparking Coils
      • Sold Individually
      • LS1, LS6

      Installation Instructions (PDF) 

    • MSD 8248 Blaster Coil 5.0L Coyote
      MSD 8248 Blaster Coil 5.0L Coyote
      (Part #5478248)
      x
                  The all new Ford 5.0L Coyote engine is hot, but MSD now offers a coil that will make it even hotter! MSD developed a replacement coil that incorporates improved windings and material to increase the output of the coil. Also, when other modifications are being added, you can rely on the Blaster Coil to recover quicker through high rpm with a powerful spark to promote combustion.
      • Improved high rpm operation
      • Patented winding design and materials
      • Direct bolt-in to factory connectors
      • 3.33402777777778
      • .51 ohms
      • Intnal Diode
      • 1.9 mH
      • 100 mA
      • 120 us
      • 48 mj
      • 32KV
    • MSD 84049 Coil Wire for Blaster Coil, Socket Cap
      MSD 84049 Coil Wire for Blaster Coil, Socket Cap
      (Part #54784049)
      x
                  Coil wire for use with Blaster Coil and Socket style cap.
              
    • MSD 2970  Atomic LS Coil Covers LS2, LS3, LS7, Red
      New
      MSD 2970 Atomic LS Coil Covers LS2, LS3, LS7, Red
      (Part #5472970)
      x
                  

       If you desire a clean and customized look to your engine compartment, our new Atomic LS coil covers are designed to fit over the valve covers and coil assemblies to effectively hide the coil packs and wiring. The cast aluminum covers align with the Atomic Smart Fuel Rail assemblies and provide a completely smooth contoured finish to the edge of the valve cover. The Atomic Coil Covers will work with OEM coils as well as MSD's Multiple Sparking Coils.

      • Fits over valve covers and coil assemblies
      • Smooth Contoured Finish
      • Works with OEM coils and MSD's Multiple Sparking Coils
      • Sold Individually
      • LS2, LS3, LS7

      Installation Instructions (PDF) 

    • MSD 82488 Blaster Coil 5.0L Coyote Set of 8
      MSD 82488 Blaster Coil 5.0L Coyote Set of 8
      (Part #54782488)
      x
                  

      The all new Ford 5.0L Coyote engine is hot, but MSD now offers a coil that will make it even hotter! MSD developed a replacement coil that incorporates improved windings and material to increase the output of the coil. Also, when other modifications are being added, you can rely on the Blaster Coil to recover quicker through high rpm with a powerful spark to promote combustion.

      MSD Rebate -  October 1, 2014 - October 31, 2014

      • Improved high rpm operation
      • Patented winding design and materials
      • Direct bolt-in to factory connectors
      • 3.33402777777778
      • .51 ohms
      • Intnal Diode
      • 1.9 mH
      • 100 mA
      • 120 us
      • 48 mj
      • 32KV
    • PerTronix 45001 Flame-Thrower II Chrome Coil
      PerTronix 45001 Flame-Thrower II Chrome Coil
      (Part #44745002)
      x
                  

      Flame-Thrower II coils feature a super low 0.6 Ohm primary resistance which make them the ideal coil for Ignitor II ignition systems, Flame-Thrower billet distributors, as well as many other high energy ignitions. Low resistance and improved turns ratio help to produce up to 45,000 volts. This higher voltage enables you to run larger spark plug gaps for added power and better fuel economy.

      These coils are also compatible with most capacitive discharge boxes.

    • MSD 8287 Multiple Spark Plug Coil for LS2, LS3, LS7 Engines, Single
      MSD 8287 Multiple Spark Plug Coil for LS2, LS3, LS7 Engines, Single
      (Part #5478287)
      x
                  Click here identify your LS coil. MSD Ignitions Multiple Spark Coils (MSC) will fit in place of the stock Gen-III GM coils and connect directly to the factory connec­tors. Once installed, youll have the power and performance of higher energy sparks, crowned with MSDs multiple spark discharge. Increased spark energy and voltage, along with multiple spark capabilities, help improve the combustion process of the fuel mix­ture to create an efficient burn. This results in improved throttle response, smooth idle and quick starts, plus increased high rpm performance!There are two types of housings for the MSD Coils. Check your ap­plication for the visual match.

      Installation Instructions (PDF)

      • Improved spark energy and voltage output
      • Patented winding design and materials
      • Direct bolt-in to factory connectors
      • 2.41736111111111
      • .48 ohms
      • 2.2K ohms
      • 1.9mH
      • 124
      • 833 us
      • 70 mj
      • 40KV
    • MSD 8242 Ford Coil on Plug SOHC 4.6L And 5.4L 2V Single
      MSD 8242 Ford Coil on Plug SOHC 4.6L And 5.4L 2V Single
      (Part #5478242)
      x
                  The improved spark energy and voltage of MSDs Blaster 2 Coils, combined with reliability, have made them a favorite for performance enthusiasts. Whether firing a restored BOSS 429 or a Saturday night circle tracker, the Blaster 2 has always gotten the job done. MSD is excited to offer Blaster coils for late model Ford engines with Coil-on-Plug technology! The new Blaster CoPs are designed as a direct bolt-in replacement coil for many SOHC Modular Motors. The housing and installation are the same as the factory, but thats where the similarity ends. Inside the MSD red housing, engineers specd better material to assemble the primary and secondary windings.  The Coil-on-Plug design of the Blaster CoPs puts the spark energy right out of the coil and across the plug gap to improve the combustion and output of the engine. The Blaster 2 CoPs are available individually or as a complete set of eight.
      • 1999-2004 Fits 4.6L and 5.4L SOHC 2V
      • Improved spark energy and voltage output
      • Patented winding design and materials
      • Direct bolt-in to factory connectors
      • Factory replacement coil with improved spark energy and voltage.
      • .51 ohms
      • 5.7K ohms
      • 1.7 mH
      • 100 mA
      • 750 us
      • 38 mj
      • 25KV
    • PerTronix 60115 Flame-Thrower HV Coil, 1.5 Ohm
      PerTronix 60115 Flame-Thrower HV Coil, 1.5 Ohm
      (Part #44760115)
      x
                  

      These high voltage E-core design coils by PerTronix put out an incredible 60,000 volts and are encased in a 6063 T-5 aluminum heat sink.

      • 1.5 Ohm primary resistance
      • 60,000 volts
      • 50 state legal

       

    • Clayton Machine LSC-02-B GM LS Coil Covers No Oil Fill Cut Out - Black
      New
      Clayton Machine LSC-02-B GM LS Coil Covers No Oil Fill Cut Out - Black
      (Part #231031)
      x
                  

       These are designed to fit LS Crate motors and will not clear factory high mount alternators (such as those found on Corvettes) unless a cutout is fabricated or aftermarket alternator and brackets are used. They are best suited for aftermarket serpentine pulley systems.

      • Elegantly hides LS coil packs
      • Sold as a Pair
      • Fits GM LS engines utilizing existing coil bracket mounting points.
      • Machined from 6063-T6 aluminum
      • Black powder coated finish with machined highlights.
      • Can also be used with relocated coil packs for lower profile appearance
      • Dimensions: 19.5” x 5”

       

    • PerTronix 60104 Flame-Thrower HV Coil, 0.45 Ohm
      PerTronix 60104 Flame-Thrower HV Coil, 0.45 Ohm
      (Part #44760104)
      x
                  

      These high voltage E-core design coils by PerTronix put out an incredible 60,000 volts and are encased in a 6063 T-5 aluminum heat sink. These coils are 50 state legal and are available with different resistance values for your application. Flame-Thrower HV .046 ohm coils are also compatible with most capacitive discharge boxes.

      • 0.45 Ohm primary resistance
      • 60,000 volts
      • 50 state legal

       

    • Crane Cams 7300040 Fire Ball Performance Ignition Coil, Chrome
      Crane Cams 7300040 Fire Ball Performance Ignition Coil, Chrome
      (Part #2880040)
      x
                  

      Great as a high output replacement for OE electronic ignition and points applications on vehicles that require a conventional round coil. For general purpose use in applications when engine RPM does not exceed 6500 RPM. Includes ballast resistor for points applications. Fits most OE brackets.

      • Primary Resistance:  1.4 ohms
      • Secondary Resistance:  5.2 kohms
      • Primary Inductance:  7.5 mH
      • Secondary Inductance:  26H
      • Leakage Inductance:  1.3 mH
      • Turns Ratio:  60:1

      Designed for use with XR-i Points Conversion Kits.

    • MSD 8211 Firewall Feed Thru, Red
      $16.99
      $18.99
      MSD 8211 Firewall Feed Thru, Red
      (Part #5478211)
      x
                  To prevent voltage leaks in passenger compartment mounted coil installations, MSD designed the Firewall Feed-Thru. Molded from Rynite® and nylon, the Firewall Feed-Thru provides 1/2  of insula­tion to ensure that the coils spark reaches the distributor.

      Installation Instructions (PDF)

      • Absolutely the best way to route spark plug wire through the firewall
    • MSD 82568 Hemi Coil-on-Plug, 2003-05, 8-Pack
      MSD 82568 Hemi Coil-on-Plug, 2003-05, 8-Pack
      (Part #54782568)
      x
                  Fire up your late model Hemi with a set of MSDs Blaster Coils. The Coils are a direct bolt-in and are specd with superior materials and winding ratios to improve the output of the coil while retaining the factory fit.

      Installation Instructions (PDF)

      MSD Rebate -  October 1, 2014 - October 31, 2014

      • Improved high rpm operation
      • Patented winding design and materials
      • Direct bolt-in to factory connectors
      • For early model Hemis, '03-'05
      • .6 ohms
      • 7.2K ohms
      • 3.6 mH
      • 72 mA
      • 1150 us
      • 62 mj
      • 35KV
    • Clayton Machine LSC-01-M GM LS Coil Covers with Oil Fill Cut Out Pass. Side
      New
      Clayton Machine LSC-01-M GM LS Coil Covers with Oil Fill Cut Out Pass. Side
      (Part #231030)
      x
                  

      These coil covers are designed to fit LS Crate motors and will not clear factory high mount alternators (such as those found on Corvettes) unless a cutout is fabricated or aftermarket alternator and brackets are used. They are best suited for aftermarket serpentine pulley systems.

      • Elegantly hides LS coil packs
      • Sold as a Pair
      • Fits GM LS engines utilizing existing coil bracket mounting points.
      • Machined from 6063-T6 aluminum
      • Mill finish
      • Can also be used with relocated coil packs for lower profile appearance
      • Dimensions: 19.5” x 5”

       

    • MSD 82448 Ford Blaster COP 99-04 4.6L, 5.4L 4V DOHC, 8-Pack
      MSD 82448 Ford Blaster COP 99-04 4.6L, 5.4L 4V DOHC, 8-Pack
      (Part #54782448)
      x
                  The housing and installation of our Ford Blaster Coil-on-Plugs are the same as the factory, but that's where the similarity ends. Inside the MSD red housing, engineers spec'd better material to assemble the primary and secondary windings.  The Coil-on-Plug design puts the spark energy right out of the coil and across the plug gap to improve the combustion and output of the engine.

      Installation Instructions (PDF)

      MSD Rebate -  October 1, 2014 - October 31, 2014

      • Fits 1999-2004 4.6L/5.4L DOHC 4V
      • Factory replacement
      • 3.12569444444444
      • .49 ohms
      • 5.6K ohms
      • 1.2mH
      • 70 mA
      • 600 us
      • 21 mj
      • 25KV
    • MSD 29701 Atomic LS Coil Covers LS1, LS6, Red
      New
      MSD 29701 Atomic LS Coil Covers LS1, LS6, Red
      (Part #54729701)
      x
                  

       If you desire a clean and customized look to your engine compartment, our new Atomic LS coil covers are designed to fit over the valve covers and coil assemblies to effectively hide the coil packs and wiring. The cast aluminum covers align with the Atomic Smart Fuel Rail assemblies and provide a completely smooth contoured finish to the edge of the valve cover. The Atomic Coil Covers will work with OEM coils as well as MSD's Multiple Sparking Coils.

      • Fits over valve covers and coil assemblies
      • Smooth Contoured Finish
      • Works with OEM coils and MSD's Multiple Sparking Coils
      • Sold Individually
      • LS1, LS6

      Installation Instructions (PDF) 

       

    • MSD 82428 Ford COP SOHC 4.6L, 5.4L 2V 8-Pack
      MSD 82428 Ford COP SOHC 4.6L, 5.4L 2V 8-Pack
      (Part #54782428)
      x
                  Please view the product's page for more information
              
    • Chrome Coil Bracket and Cover
      Chrome Coil Bracket and Cover
      (Part #91017485)
      x
                  These ignition coil brackets and covers fit over stock coils. Chrome.
              
    • MSD 8216 GM LS2, LS7 Engine Coil Brackets
      MSD 8216 GM LS2, LS7 Engine Coil Brackets
      (Part #5478216)
      x
                  LS Engines are outstanding when it comes to performance, however their aesthetics leave a lot to be desired. Specifically when it comes to the coils and their factory stamped  brackets. MSD is excited to offer two new brackets for use on MSD engines that will help clean up the coil installation. These new brackets are made from cast aluminum with a machined finish to deliver strength and great looks. The brackets are supplied with all new mounting hardware and accept either OEM or MSD style coils!

      Installation Instructions (PDF)

      • For LS2/LS7 OE Coils
      • Also fits MSD MSC Coils
    Goto Previous PagePrevious Page
    1 2 3 4 5