Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Speedway Motors has all the essential performance ignition components and accessories muscle car owners crave! We stock everything from low-resistance spark plugs & wires and HEI distributors to ignition coils and MSD ignition control boxes. Our great selection from quality brands is why Speedway Motors is the only place to get your performance muscle car ignition parts.

"Muscle Car, Ignition Coils" Page 1 of 2

  • MSD 8248 Blaster Coil 5.0L Coyote
    New
    MSD 8248 Blaster Coil 5.0L Coyote
    x
                The all new Ford 5.0L Coyote engine is hot, but MSD now offers a coil that will make it even hotter! MSD developed a replacement coil that incorporates improved windings and material to increase the output of the coil. Also, when other modifications are being added, you can rely on the Blaster Coil to recover quicker through high rpm with a powerful spark to promote combustion.
    • Improved high rpm operation
    • Patented winding design and materials
    • Direct bolt-in to factory connectors
    • 3.33402777777778
    • .51 ohms
    • Intnal Diode
    • 1.9 mH
    • 100 mA
    • 120 us
    • 48 mj
    • 32KV
  • MSD 84049 Coil Wire for Blaster Coil, Socket Cap
    New
    MSD 84049 Coil Wire for Blaster Coil, Socket Cap
    x
                Coil wire for use with Blaster Coil and Socket style cap.
            
  • MSD 82488 Blaster Coil 5.0L Coyote Set of 8
    New
    MSD 82488 Blaster Coil 5.0L Coyote Set of 8
    x
                

    The all new Ford 5.0L Coyote engine is hot, but MSD now offers a coil that will make it even hotter! MSD developed a replacement coil that incorporates improved windings and material to increase the output of the coil. Also, when other modifications are being added, you can rely on the Blaster Coil to recover quicker through high rpm with a powerful spark to promote combustion.

    MSD Rebate -  October 1, 2014 - October 31, 2014

    • Improved high rpm operation
    • Patented winding design and materials
    • Direct bolt-in to factory connectors
    • 3.33402777777778
    • .51 ohms
    • Intnal Diode
    • 1.9 mH
    • 100 mA
    • 120 us
    • 48 mj
    • 32KV
  • PerTronix 45001 Flame-Thrower II Chrome Coil
    PerTronix 45001 Flame-Thrower II Chrome Coil
    x
                

    Flame-Thrower II coils feature a super low 0.6 Ohm primary resistance which make them the ideal coil for Ignitor II ignition systems, Flame-Thrower billet distributors, as well as many other high energy ignitions. Low resistance and improved turns ratio help to produce up to 45,000 volts. This higher voltage enables you to run larger spark plug gaps for added power and better fuel economy.

    These coils are also compatible with most capacitive discharge boxes.

  • MSD 8287 Multiple Spark Plug Coil for LS2, LS3, LS7 Engines, Single
    New
    MSD 8287 Multiple Spark Plug Coil for LS2, LS3, LS7 Engines, Single
    x
                Click here identify your LS coil. MSD Ignitions Multiple Spark Coils (MSC) will fit in place of the stock Gen-III GM coils and connect directly to the factory connec­tors. Once installed, youll have the power and performance of higher energy sparks, crowned with MSDs multiple spark discharge. Increased spark energy and voltage, along with multiple spark capabilities, help improve the combustion process of the fuel mix­ture to create an efficient burn. This results in improved throttle response, smooth idle and quick starts, plus increased high rpm performance!There are two types of housings for the MSD Coils. Check your ap­plication for the visual match.

    Installation Instructions (PDF)

    • Improved spark energy and voltage output
    • Patented winding design and materials
    • Direct bolt-in to factory connectors
    • 2.41736111111111
    • .48 ohms
    • 2.2K ohms
    • 1.9mH
    • 124
    • 833 us
    • 70 mj
    • 40KV
  • MSD 8242 Ford Coil on Plug SOHC 4.6L And 5.4L 2V Single
    New
    MSD 8242 Ford Coil on Plug SOHC 4.6L And 5.4L 2V Single
    x
                The improved spark energy and voltage of MSDs Blaster 2 Coils, combined with reliability, have made them a favorite for performance enthusiasts. Whether firing a restored BOSS 429 or a Saturday night circle tracker, the Blaster 2 has always gotten the job done. MSD is excited to offer Blaster coils for late model Ford engines with Coil-on-Plug technology! The new Blaster CoPs are designed as a direct bolt-in replacement coil for many SOHC Modular Motors. The housing and installation are the same as the factory, but thats where the similarity ends. Inside the MSD red housing, engineers specd better material to assemble the primary and secondary windings.  The Coil-on-Plug design of the Blaster CoPs puts the spark energy right out of the coil and across the plug gap to improve the combustion and output of the engine. The Blaster 2 CoPs are available individually or as a complete set of eight.
    • 1999-2004 Fits 4.6L and 5.4L SOHC 2V
    • Improved spark energy and voltage output
    • Patented winding design and materials
    • Direct bolt-in to factory connectors
    • Factory replacement coil with improved spark energy and voltage.
    • .51 ohms
    • 5.7K ohms
    • 1.7 mH
    • 100 mA
    • 750 us
    • 38 mj
    • 25KV
  • PerTronix 60115 Flame-Thrower HV Coil, 1.5 Ohm
    PerTronix 60115 Flame-Thrower HV Coil, 1.5 Ohm
    x
                

    These high voltage E-core design coils by PerTronix put out an incredible 60,000 volts and are encased in a 6063 T-5 aluminum heat sink.

    • 1.5 Ohm primary resistance
    • 60,000 volts
    • 50 state legal

     

  • PerTronix 60104 Flame-Thrower HV Coil, 0.45 Ohm
    PerTronix 60104 Flame-Thrower HV Coil, 0.45 Ohm
    x
                

    These high voltage E-core design coils by PerTronix put out an incredible 60,000 volts and are encased in a 6063 T-5 aluminum heat sink. These coils are 50 state legal and are available with different resistance values for your application. Flame-Thrower HV .046 ohm coils are also compatible with most capacitive discharge boxes.

    • 0.45 Ohm primary resistance
    • 60,000 volts
    • 50 state legal

     

  • Crane Cams 7300040 Fire Ball Performance Ignition Coil, Chrome
    Crane Cams 7300040 Fire Ball Performance Ignition Coil, Chrome
    x
                

    Great as a high output replacement for OE electronic ignition and points applications on vehicles that require a conventional round coil. For general purpose use in applications when engine RPM does not exceed 6500 RPM. Includes ballast resistor for points applications. Fits most OE brackets.

    • Primary Resistance:  1.4 ohms
    • Secondary Resistance:  5.2 kohms
    • Primary Inductance:  7.5 mH
    • Secondary Inductance:  26H
    • Leakage Inductance:  1.3 mH
    • Turns Ratio:  60:1

    Designed for use with XR-i Points Conversion Kits.

  • MSD 8211 Firewall Feed Thru, Red
    $16.99
    $18.99
    New
    MSD 8211 Firewall Feed Thru, Red
    x
                To prevent voltage leaks in passenger compartment mounted coil installations, MSD designed the Firewall Feed-Thru. Molded from Rynite� and nylon, the Firewall Feed-Thru provides 1/2  of insula�tion to ensure that the coils spark reaches the distributor.

    Installation Instructions (PDF)

    • Absolutely the best way to route spark plug wire through the firewall
  • MSD 82568 Hemi Coil-on-Plug, 2003-05, 8-Pack
    New
    MSD 82568 Hemi Coil-on-Plug, 2003-05, 8-Pack
    x
                Fire up your late model Hemi with a set of MSDs Blaster Coils. The Coils are a direct bolt-in and are specd with superior materials and winding ratios to improve the output of the coil while retaining the factory fit.

    Installation Instructions (PDF)

    MSD Rebate -  October 1, 2014 - October 31, 2014

    • Improved high rpm operation
    • Patented winding design and materials
    • Direct bolt-in to factory connectors
    • For early model Hemis, '03-'05
    • .6 ohms
    • 7.2K ohms
    • 3.6 mH
    • 72 mA
    • 1150 us
    • 62 mj
    • 35KV
  • MSD 82448 Ford Blaster COP 99-04 4.6L, 5.4L 4V DOHC, 8-Pack
    New
    MSD 82448 Ford Blaster COP 99-04 4.6L, 5.4L 4V DOHC, 8-Pack
    x
                The housing and installation of our Ford Blaster Coil-on-Plugs are the same as the factory, but that's where the similarity ends. Inside the MSD red housing, engineers spec'd better material to assemble the primary and secondary windings.  The Coil-on-Plug design puts the spark energy right out of the coil and across the plug gap to improve the combustion and output of the engine.

    Installation Instructions (PDF)

    MSD Rebate -  October 1, 2014 - October 31, 2014

    • Fits 1999-2004 4.6L/5.4L DOHC 4V
    • Factory replacement
    • 3.12569444444444
    • .49 ohms
    • 5.6K ohms
    • 1.2mH
    • 70 mA
    • 600 us
    • 21 mj
    • 25KV
  • MSD 82428 Ford COP SOHC 4.6L, 5.4L 2V 8-Pack
    New
    MSD 82428 Ford COP SOHC 4.6L, 5.4L 2V 8-Pack
    x
                Please view the product's page for more information
            
  • Chrome Coil Bracket and Cover
    Chrome Coil Bracket and Cover
    x
                These ignition coil brackets and covers fit over stock coils. Chrome.
            
  • MSD 8216 GM LS2, LS7 Engine Coil Brackets
    New
    MSD 8216 GM LS2, LS7 Engine Coil Brackets
    x
                LS Engines are outstanding when it comes to performance, however their aesthetics leave a lot to be desired. Specifically when it comes to the coils and their factory stamped  brackets. MSD is excited to offer two new brackets for use on MSD engines that will help clean up the coil installation. These new brackets are made from cast aluminum with a machined finish to deliver strength and great looks. The brackets are supplied with all new mounting hardware and accept either OEM or MSD style coils!

    Installation Instructions (PDF)

    • For LS2/LS7 OE Coils
    • Also fits MSD MSC Coils
  • MSD 8231 GM 96-97 External Single Connector Coil
    New
    MSD 8231 GM 96-97 External Single Connector Coil
    x
                Used on 1996-1999 GM vehicles.

    Installation Instructions (PDF)

    • Direct performance replacement for GM Coil, 1996-1999
    • 80:1 turns ratio and lower primary resistance produce high voltage output
    • Works with stock ignition as well as MSD Ignitions
    • CARB E.O. Approved
    • 3.33402777777778
    • 6.5K OHMs
    • 3.9mH
    • 40,000 Volts
  • MSD 8215 GM LS1, LS6 Engine Coil Brackets
    New
    MSD 8215 GM LS1, LS6 Engine Coil Brackets
    x
                LS Engines are outstanding when it comes to performance, however their aesthetics leave a lot to be desired. Specifically when it comes to the coils and their factory stamped  brackets. MSD is excited to offer two new brackets for use on MSD engines that will help clean up the coil installation. These new brackets are made from cast aluminum with a machined finish to deliver strength adn great looks. The brackets are supplied with all new mounting hardware and accept either OEM or MSD style coils!

    Installation Instructions (PDF)

    • For LS1/LS6 OE Coils
    • Also fits MSD MSC Coils
  • Crane Cams 7300020 Fire Ball Performance Ignition Coil, Black
    Crane Cams 7300020 Fire Ball Performance Ignition Coil, Black
    x
                

    Great as a high output replacement for OE electronic ignition and points applications on vehicles that require a conventional round coil. For general purpose use in applications when engine RPM does not exceed 6500 RPM. Includes ballast resistor for points applications. Fits most OE brackets.

    • Primary Resistance:  1.4 ohms
    • Secondary Resistance:  5.2 kohms
    • Primary Inductance:  7.5 mH
    • Secondary Inductance:  26H
    • Leakage Inductance:  1.3 mH
    • Turns Ratio:  60:1

    Designed for use with XR-i Points Conversion Kits.

  • EMPI 16-7015 Billet Coil Clamp Mount
    EMPI 16-7015 Billet Coil Clamp Mount
    x
                

    Combine function and beauty with these custom machined and fully polished aluminum billet coil clamp bracket mounts.  These universal mounts include 1/4"-20" mounting bolts, clamps onto a coil with a 2-1/8" diameter and features a mount bolt center spacing of 3-1/2".

    • Polished billet aluminum
    • Secures and mounts coil to firewall or inner fender well
    • Clamps onto a 2-1/8" coil body diameter
    • 3-1/2" mount bolt center spacing
  • MSD 8230 Single Tower, Isolated Ground Coil
    New
    MSD 8230 Single Tower, Isolated Ground Coil
    x
                The MSD Single Tower Coil can be used in several applications with MSD's DIS Ignition Controls.

    Installation Instructions (PDF)

    • Designed for coil-per-cylinder racing applications with MSD DIS-HO Ignitions
    • 70:1 turns ratio and lower primary resistance produce high voltage output
    • Brass spark plug style terminal and epoxy molded housing
    • No CARB Exemption Order Number
  • MSD 8402 HEI Distributor Coil Cover
    $17.99
    $19.99
    New
    MSD 8402 HEI Distributor Coil Cover
    x
                HEI Distributor coil cover.
    • MSD 8202 Blaster 2 Ignition Coil
      MSD 8202 Blaster 2 Ignition Coil
      x
                  Please view the product's page for more information
              
    • MSD 8203 Blaster 2 Ignition Coil w/ Resistor
      MSD 8203 Blaster 2 Ignition Coil w/ Resistor
      x
                  

      If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD ignition, the Blaster Coil line is the right choice. Special 100:1 windings, kept cool in an oil filled metal canister, are used to provide maximum build-up of voltage.  The tower assembly is molded of durable alkyd material due to its high dielectric characteristics while wide spaced brass primary terminals prevent the possibility of spark. Can be used with a stock ignition, Blaster Ignition, or MSD 5, 6 or 7 Ignition Control.

      The 0.8 ohm ballast resistor must be used with stock points ignition and Mallory Unilite applications. Includes MSD Power Tower top.

      • Improved output coil for stock points or electronic ignitions, Blaster Ignition, or MSD 5, 6, and 7 Series
      • Supplied with two plug wire boots, terminals, and jumper wire
      • 100:1 turns ratio and lower primary resistance produce high voltage output
      • MSD Red metal canister is filled with a premium grade oil for cooling

      MSD Blaster 2 Ignition Installation Instructions (PDF)

      MSD Rebate (Link)

       

    • MSD 8214 Coil Ballast Resistor 0.8 ohm
      New
      MSD 8214 Coil Ballast Resistor 0.8 ohm
      x
                  For use with an MSD Blaster Coil when connected to a stock points ignition system.
      • Use with older points style ignitions
    • MSD 84022 Extreme HEI Coil Cover
      MSD 84022 Extreme HEI Coil Cover
      x
                  

      Replacement coil dust cover for MSD Extreme Output HEI Kit # 547-8502. Made from DuPont Rynite.

      MSD Rebate (Link)

       

    • MSD 8232 Single Tower Coil, CPC Ignition
      New
      MSD 8232 Single Tower Coil, CPC Ignition
      x
                  For performance applications with multi-channel coil drivers this Single Tower Blaster Coil is a great choice. The Coil will also top off your MSD DIS-HO Ignition system when it is set up for a coil-per-cylinder ignition system. The coils low resistance and quick rise time make it ideal for high revving, multi-coil perfor�mance systems.
      • Designed exclusively for the MSD CPC Ignition Control
      • 85:1 turns ratio and lower primary resistance produce high voltage output
      • Dupont Rynite housing with a tall tower and isolated primary terminals
      • No CARB Exemption Order Number
      • 3.54236111111111
      • 988 OHMs
      • 3.7 mH
      • 43,000 Volts
      • 800 mA
      • 125 uS
    • MSD 8243 Ford COP Modular 05-07 SOHC 4.6L, 5.4L 3V Single
      New
      MSD 8243 Ford COP Modular 05-07 SOHC 4.6L, 5.4L 3V Single
      x
                  The improved spark energy and voltage of MSDs Blaster 2 Coils, combined with reliability, have made them a favorite for performance enthusiasts. Whether firing a restored BOSS 429 or a Saturday night circle tracker, the Blaster 2 has always gotten the job done. MSD is excited to offer Blaster coils for late model Ford engines with Coil-on-Plug technology! The new Blaster CoPs are designed as a direct bolt-in replacement coil for many SOHC Modular Motors. The housing and installation are the same as the factory, but thats where the similarity ends. Inside the MSD red housing, engineers specd better material to assemble the primary and secondary windings. The Coil-on-Plug design of the Blaster CoPs puts the spark energy right out of the coil and across the plug gap to improve the combustion and output of the engine. The Blaster 2 CoPs are available individually or as a complete set of eight.
      • 2005-2009 Fits 4.6L and 5.4L 3V
      • Improved spark energy and voltage output
      • Patented winding design and materials
      • Direct bolt-in to factory connectors
      • Improved high rpm operation;Patented winding design and materials;Direct bolt-in to factory connectors
      • .51 ohms
      • 5.7K ohms
      • 1.7 mH
      • 100 mA
      • 750 us
      • 38 mj
      • 25KV
    • MSD 8223 Blaster 3 Coils
      $49.99
      MSD 8223 Blaster 3 Coils
      x
                  

      The Blaster 3 Coil features an extra tall tower design to improve the coil wire attachment and spark isolation. Supplied with a 90° terminal and boot.

      • Extra tall secondary tower for secure coil wire connection
      • Improved output coil for electronic ignitions, and MSD Ignitions (ballast resistor required for points)•  100:1 turns ratio and lower primary resistance produce high voltage output
      • MSD Red metal canister is filled with a premium grade oil for cooling
      • Supplied with a 90° spark plug style terminal and boot
      • CARB E.O. Approved

      547-3223 Instruction Sheet (pdf)

      MSD Rebate (Link)

    • MSD PRD10987 HEI Type Coil Cover
      MSD PRD10987 HEI Type Coil Cover
      x
                  

      HEI Type Coil Cover.

      MSD Rebate (Link)

       

    • MSD 8205 Blaster 2 Coil, Ford High-Performance
      New
      MSD 8205 Blaster 2 Coil, Ford High-Performance
      x
                  This coil features the same coil terminals as the stock Ford Duraspark "horseshoe" connector. This makes it a splice free installation, remove stock coil and replace with new MSD coil.

      Installation Instructions (PDF)

      • 4.16736111111111
      • 4.5K OHMs
      • 8 mH
      • 45,000 Volts
      • 140 mA
      • 350 uS
    • MSD 8252 Blaster HVC, Works With  MSD 6 Series Units
      New
      MSD 8252 Blaster HVC, Works With MSD 6 Series Units
      x
                  The Blaster HVC is designed for high rpm, long duration applications such as road course and circle track racing using an MSD 6 Series Ignition.

      Installation Instructions (PDF)

      • Designed for high rpm, long duration applications
      • Works with electronic ignitions and MSD Ignition Controls (ballast resistor required for points systems)
      • 100:1 turns ratio and lower primary resistance produce high voltage output
      • Windings are encased in blue epoxy and secured with extruded brackets
      • Spark plug style terminal and threaded brass primary studs
      • Supplied with rubber shock mounts
      • CARB E.O. Approved
      • 4.16736111111111
      • 1.38K OHMs
      • 7 mH
      • 42,000 Volts
      • 300 mA
      • 200 uS
    • MSD 8201 Pro Power Coil
      $112.99
      $156.99
      New
      MSD 8201 Pro Power Coil
      x
                  The MSD Pro Power Coil is a great choice for short duration applications such as drag racing. The special windings of the Pro Power Coil have extremely low resistance to produce the highest voltage possible with plenty of spark energy when used with an MSD 7 or 8 Series Ignition Control.The coil wire tower rises tall above the primary terminals and uses a spark plug style terminal for a firm connection to the coil wire. The housing is molded from a high dielectric polyester material and a Ciba Arathane compound adds vibration protection to the coil windings. Vibration mounts are also supplied.

      Installation Instructions (PDF)

      • High voltage coil designed for short duration applications only
      • Primary and secondary windings are encased in Ciba polyurethane for vibration protection
      • Extremely low primary resistance
      • Housing is molded from a durable and high dielectric polyester
      • Supplied with rubber shock mounts
      • For MSD 7ALs, 8 and 10 Ignitions only, not for use on street vehicles
      • No CARB Exemption Order Number
      • 4.16736111111111
      • 1k OHMs
      • 1 mH
      • 55,000 Volts
      • 800 mA
      • 180 uS
    • MSD 8224 GM Coil Pack, 2 Tower Style
      $45.99
      $55.99
      New
      MSD 8224 GM Coil Pack, 2 Tower Style
      x
                  Used on GM vehicles from the mid 1980l to late 1990s.

      Installation Instructions (PDF)

      • Direct performance replacement for GM 2 Tower coils used from the mid 1980s to late 1990s
      • 80:1 turns ratio and lower primary resistance produce high voltage output
      • Works with stock ignition as well as MSD Ignitions
      • CARB E.O. Approved
      • 3.33402777777778
      • 7.8K OHMs
      • 4.2mH
      • 40,000 Volts
    • MSD 88867 LS Coil Harness
      $53.99
      New
      MSD 88867 LS Coil Harness
      x
                  This harness has been made by MSD to correct a check engine light issue that can arise in vehicles using the MSD LS Coil Packs on their engines. This harness will supply additional battery voltage to the coils in order to fire the coils properly and not drain other engine systems of power. This is necessary due to the varying wire gauges used on production vehicles.

      Installation Instructions (PDF)

      • Corrrects check engine light
    • MSD 82878 Multiple Spark Plug Coil for LS2, LS3, LS7 Engines, 8-Pack
      New
      MSD 82878 Multiple Spark Plug Coil for LS2, LS3, LS7 Engines, 8-Pack
      x
                  Click here identify your LS coil. MSD Ignitions Multiple Spark Coils (MSC) will fit in place of the stock Gen-III GM coils and connect directly to the factory connec­tors. Once installed, youll have the power and performance of higher energy sparks, crowned with MSDs multiple spark discharge. Increased spark energy and voltage, along with multiple spark capabilities, help improve the combustion process of the fuel mix­ture to create an efficient burn. This results in improved throttle response, smooth idle and quick starts, plus increased high rpm performance!There are two types of housings for the MSD Coils. Check your ap­plication for the visual match.

      Installation Instructions (PDF)

      MSD Rebate -  October 1, 2014 - October 31, 2014

      • Improved spark energy and voltage output
      • Patented winding design and materials
      • Direct bolt-in to factory connectors
      • 2.41736111111111
      • .48 ohms
      • 2.2K ohms
      • 1.9mH
      • 124
      • 833 us
      • 70 mj
      • 40KV
    • MSD 8285 Multiple Spark Plug Coil for LS1, LS6 Engines, Single
      New
      MSD 8285 Multiple Spark Plug Coil for LS1, LS6 Engines, Single
      x
                  MSDs engineering team have been working diligently the past year to improve our Multiple Spark Coils for the GM LS-engine platform. The new coils fit in place of the OEM coils yet are capable of delivering higher spark energy to the plugs, topped with multiple sparks at idle rpm. Increased spark energy and voltage, along with multiple spark capabilities, help improve the combustion process of the fuel mixture to create an efficient burn. This results in improved throttle response, smooth idle and quick starts, plus increased high rpm performance! There are three types of housings for the MSD Coils. Click here to Identify your LS Coil.

      Installation Instructions (PDF)

      • Improved high rpm operation
      • Multiple Sparks at idle RPM
      • 3 times the current of stock coils
      • 2.33402777777778
      • .73 ohms
      • 3.7K ohms
      • 3.6 mH
      • 124 mA
      • 1110 us
      • 93 mj
      • 40KV
    • MSD 8244 Ford COP Modular 99-04 4.6L, 5.4L DOHC 4V Single
      New
      MSD 8244 Ford COP Modular 99-04 4.6L, 5.4L DOHC 4V Single
      x
                  The housing and installation of our Ford Blaster Coil-on-Plugs are the same as the factory, but that's where the similarity ends. Inside the MSD red housing, engineers spec'd better material to assemble the primary and secondary windings. The Coil-on-Plug design puts the spark energy right out of the coil and across the plug gap to improve the combustion and output of the engine.

      Installation Instructions (PDF)

      • Fits 1999-2004 4.6L/5.4L DOHC 4V
      • Stock Replacement
      • 3.12569444444444
      • .49 ohms
      • 5.6K ohms
      • 1.2mH
      • 70 mA
      • 600 us
      • 21 mj
      • 25KV
    • PerTronix 60130 Flame-Thrower HV Coil, 3.0 Ohm
      PerTronix 60130 Flame-Thrower HV Coil, 3.0 Ohm
      x
                  

      These high voltage E-core design coils by Pertronix put out an incredible 60,000 volts and are encased in a 6063 T-5 aluminum heat sink. These coils are 50 state legal and are available with different resistance values for your application.

      • 3.0 Ohm primary resistance
      • 60,000 volts
      • 50 state legal

       

    • PerTronix 40001 Flame-Thrower Coil, Chrome
      PerTronix 40001 Flame-Thrower Coil, Chrome
      x
                  

      The hotter the spark, the easier your engine will start, and this 40,000 volt coil is just the ticket to a quick start! Its higher voltage allows larger spark plug gaps for added power, smoother response and better fuel economy. These coils are internally resisted so they are compatible with many inductive ignition systems.  

      • Smooth chrome finish 
      • 40,000 volts
      • For use with 12 volt inductive ignition systems.
      • 1.5 Ohm primary resistance
      • Legal in all 50 states and Canada
    • MSD 8213 Coil Bracket
      $6.99
      MSD 8213 Coil Bracket
      x
                  

      The MSD Coil Bracket offers easy, univer­sal mounting for standard size ignition coils up to 2-1/4" in diameter. The Bracket uses a bolt and nut combination instead of the easily stripped self-tapping screw common on other brand brackets.  Perfect for cannister type coils

      Adustable from 1-3/4" to 2-3/8" with slight bending of mounting tabs.

      MSD Rebate (Link)

    Goto Previous PagePrevious Page
    1 2