Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products

Speedway Motors has all the essential performance ignition components and accessories muscle car owners crave! We stock everything from low-resistance spark plugs & wires and HEI distributors to ignition coils and MSD ignition control boxes. Our great selection from quality brands is why Speedway Motors is the only place to get your performance muscle car ignition parts.

"Muscle Car, Ignition Coils" Page 1 of 1

  • MSD PRD10987 HEI Type Coil Cover
    MSD PRD10987 HEI Type Coil Cover
    x
                

    HEI Type Coil Cover.

  • PerTronix 40001 Flame-Thrower Coil, Chrome
    PerTronix 40001 Flame-Thrower Coil, Chrome
    x
                

    The hotter the spark, the easier your engine will start, and this 40,000 volt coil is just the ticket to a quick start! Its higher voltage allows larger spark plug gaps for added power, smoother response and better fuel economy. These coils are internally resisted so they are compatible with many inductive ignition systems.  

    • Smooth chrome finish 
    • 40,000 volts
    • For use with 12 volt inductive ignition systems.
    • 1.5 Ohm primary resistance
    • Legal in all 50 states and Canada
  • Chrome Coil Mounting Bracket
    Chrome Coil Mounting Bracket
    x
                These chrome coil mounting brackets fit over stock coils. Adjustable from 2-1/8" to 2-5/16" with slight modification. 
            
  • PerTronix 40011 Flame-Thrower Coil, Black
    PerTronix 40011 Flame-Thrower Coil, Black
    x
                

    The hotter the spark, the easier your engine will start, and this 40,000 volt coil is just the ticket to a quick start! Its higher voltage allows larger spark plug gaps for added power, smoother response and better fuel economy. These coils are internally resisted so they are compatible with many inductive ignition systems.

    • 40,000 volts
    • Black finish for that "stock look"
    • For use with 12 volt inductive ignition systems
    • 1.5 Ohm primary resistance.
    • Legal in all 50 states and Canada

     

  • MSD 8202 Blaster 2 Ignition Coil
    MSD 8202 Blaster 2 Ignition Coil
    x
                

    If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD ignition, the Blaster Coil line is the right choice. Special 100:1 windings, kept cool in an oil filled metal canister, are used to provide maximum build-up of voltage.  The tower assembly is molded of durable alkyd material due to its high dielectric characteristics while wide spaced brass primary terminals prevent the possibility of spark. Can be used with a stock ignition, Blaster Ignition, or MSD 5, 6 or 7 Ignition Control.

    For use with stock or MSD electronic ignitions. Most late model vehicles with electronic ignitions do not require a ballast resistor, check your ignition and manufacturers specifications to determine if a ballast is required in your application.

    • Improved output coil for stock points or electronic ignitions, Blaster Ignition, or MSD 5, 6, and 7 Series
    • Supplied with two plug wire boots, terminals, and jumper wire
    • 100:1 turns ratio and lower primary resistance produce high voltage output
    • MSD Red metal canister is filled with a premium grade oil for cooling
    • CARB E.O. Approved

    MSD Ignition Installation Instructions (PDF)


  • MSD 8222 Blaster 2 Coil - Black
    $46.99
    $47.99
    MSD 8222 Blaster 2 Coil - Black
    x
                

    In applications such as off-road, marine or other harsh conditions, the MSD Blaster High Vibration Coil is the best choice. The sturdy metal housing of the High Vibration Coil is completely pot­ted with a premium grade epoxy to completely encase the coil’s primary and secondary windings. This protects the coil’s internal components from high and low frequency vibrations that are commonly experienced in racing.

    • Metal canister is encased with epoxy to protect the windings from high vibration applications
    • Improved output coil for electronic ignitions, and MSD Ignitions (ballast resistor required for points)
    • 100:1 turns ratio and lower primary resistance produce high voltage output
    • CARB E.O. Approved

    547-8222 Instruction Sheet (pdf)

  • PerTronix 45001 Flame-Thrower II Chrome Coil
    PerTronix 45001 Flame-Thrower II Chrome Coil
    x
                

    Flame-Thrower II coils feature a super low 0.6 Ohm primary resistance which make them the ideal coil for Ignitor II ignition systems, Flame-Thrower billet distributors, as well as many other high energy ignitions. Low resistance and improved turns ratio help to produce up to 45,000 volts. This higher voltage enables you to run larger spark plug gaps for added power and better fuel economy.

    These coils are also compatible with most capacitive discharge boxes.

  • MSD 8213 Coil Bracket
    $6.99
    MSD 8213 Coil Bracket
    x
                

    The MSD Coil Bracket offers easy, univer­sal mounting for standard size ignition coils up to 2-1/4" in diameter. The Bracket uses a bolt and nut combination instead of the easily stripped self-tapping screw common on other brand brackets.  Perfect for cannister type coils

    Adustable from 1-3/4" to 2-3/8" with slight bending of mounting tabs.

  • PerTronix 60115 Flame-Thrower HV Coil, 1.5 Ohm
    PerTronix 60115 Flame-Thrower HV Coil, 1.5 Ohm
    x
                

    These high voltage E-core design coils by PerTronix put out an incredible 60,000 volts and are encased in a 6063 T-5 aluminum heat sink.

    • 1.5 Ohm primary resistance
    • 60,000 volts
    • 50 state legal

     

  • PerTronix 60104 Flame-Thrower HV Coil, 0.45 Ohm
    PerTronix 60104 Flame-Thrower HV Coil, 0.45 Ohm
    x
                

    These high voltage E-core design coils by PerTronix put out an incredible 60,000 volts and are encased in a 6063 T-5 aluminum heat sink. These coils are 50 state legal and are available with different resistance values for your application. Flame-Thrower HV .046 ohm coils are also compatible with most capacitive discharge boxes.

    • 0.45 Ohm primary resistance
    • 60,000 volts
    • 50 state legal

     

  • Crane Cams 7300040 Fire Ball Performance Ignition Coil, Chrome
    Crane Cams 7300040 Fire Ball Performance Ignition Coil, Chrome
    x
                

    Great as a high output replacement for OE electronic ignition and points applications on vehicles that require a conventional round coil. For general purpose use in applications when engine RPM does not exceed 6500 RPM. Includes ballast resistor for points applications. Fits most OE brackets.

    • Primary Resistance:  1.4 ohms
    • Secondary Resistance:  5.2 kohms
    • Primary Inductance:  7.5 mH
    • Secondary Inductance:  26H
    • Leakage Inductance:  1.3 mH
    • Turns Ratio:  60:1

    Designed for use with XR-i Points Conversion Kits.

  • Chrome Coil Bracket and Cover
    Chrome Coil Bracket and Cover
    x
                These ignition coil brackets and covers fit over stock coils. Chrome.
            
  • Crane Cams 7300020 Fire Ball Performance Ignition Coil, Black
    Crane Cams 7300020 Fire Ball Performance Ignition Coil, Black
    x
                

    Great as a high output replacement for OE electronic ignition and points applications on vehicles that require a conventional round coil. For general purpose use in applications when engine RPM does not exceed 6500 RPM. Includes ballast resistor for points applications. Fits most OE brackets.

    • Primary Resistance:  1.4 ohms
    • Secondary Resistance:  5.2 kohms
    • Primary Inductance:  7.5 mH
    • Secondary Inductance:  26H
    • Leakage Inductance:  1.3 mH
    • Turns Ratio:  60:1

    Designed for use with XR-i Points Conversion Kits.

  • EMPI 16-7015 Billet Coil Clamp Mount
    EMPI 16-7015 Billet Coil Clamp Mount
    x
                

    Combine function and beauty with these custom machined and fully polished aluminum billet coil clamp bracket mounts.  These universal mounts include 1/4"-20" mounting bolts, clamps onto a coil with a 2-1/8" diameter and features a mount bolt center spacing of 3-1/2".

    • Polished billet aluminum
    • Secures and mounts coil to firewall or inner fender well
    • Clamps onto a 2-1/8" coil body diameter
    • 3-1/2" mount bolt center spacing
  • MSD 8203 Blaster 2 Ignition Coil w/ Resistor
    MSD 8203 Blaster 2 Ignition Coil w/ Resistor
    x
                

    If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD ignition, the Blaster Coil line is the right choice. Special 100:1 windings, kept cool in an oil filled metal canister, are used to provide maximum build-up of voltage.  The tower assembly is molded of durable alkyd material due to its high dielectric characteristics while wide spaced brass primary terminals prevent the possibility of spark. Can be used with a stock ignition, Blaster Ignition, or MSD 5, 6 or 7 Ignition Control.

    The 0.8 ohm ballast resistor must be used with stock points ignition and Mallory Unilite applications. Includes MSD Power Tower top.

    • Improved output coil for stock points or electronic ignitions, Blaster Ignition, or MSD 5, 6, and 7 Series
    • Supplied with two plug wire boots, terminals, and jumper wire
    • 100:1 turns ratio and lower primary resistance produce high voltage output
    • MSD Red metal canister is filled with a premium grade oil for cooling

    MSD Blaster 2 Ignition Installation Instructions (PDF)

  • MSD 84022 Extreme HEI Coil Cover
    MSD 84022 Extreme HEI Coil Cover
    x
                

    Replacement coil dust cover for MSD Extreme Output HEI Kit # 547-8502. Made from DuPont Rynite.

  • MSD 8223 Blaster 3 Coils
    $49.99
    MSD 8223 Blaster 3 Coils
    x
                

    The Blaster 3 Coil features an extra tall tower design to improve the coil wire attachment and spark isolation. Supplied with a 90° terminal and boot.

    • Extra tall secondary tower for secure coil wire connection
    • Improved output coil for electronic ignitions, and MSD Ignitions (ballast resistor required for points)•  100:1 turns ratio and lower primary resistance produce high voltage output
    • MSD Red metal canister is filled with a premium grade oil for cooling
    • Supplied with a 90° spark plug style terminal and boot
    • CARB E.O. Approved

    547-3223 Instruction Sheet (pdf)

  • PerTronix 60130 Flame-Thrower HV Coil, 3.0 Ohm
    PerTronix 60130 Flame-Thrower HV Coil, 3.0 Ohm
    x
                

    These high voltage E-core design coils by Pertronix put out an incredible 60,000 volts and are encased in a 6063 T-5 aluminum heat sink. These coils are 50 state legal and are available with different resistance values for your application.

    • 3.0 Ohm primary resistance
    • 60,000 volts
    • 50 state legal

     

  • MSD 8227 Blaster Coil - Ford
    $49.99
    MSD 8227 Blaster Coil - Ford
    x
                

    Top off your Ford or GM Ignition system with these great new replacement coils. The Blaster TFI and GM Coils have MSD performance in factory style housings!MSD designed these Coils by combining our Blaster Coil experience with E-core coil efficiency. Each coil has a unique turns ratio plus there is lower primary resistance than the stock coil. This all amounts to a bolt-in replacement coil that produces more output voltage. The Coils will work with stock ignition systems as well as MSD equipped cars and trucks.

    • Direct performance replacement for Ford TFI coil
    • 85:1 turns ratio and lower primary resistance produce high voltage output
    • Works with stock ignition as well as MSD Ignitions
    • CARB E.O. Approved

    547-8227 Instruction Sheet (pdf)

  • MSD 8226 Blaster Coil - GM
    $49.99
    MSD 8226 Blaster Coil - GM
    x
                

    Top off your GM Ignition system with these great new replacement coils. The GM Coils have MSD performance in factory style housings! MSD designed these Coils by combining our Blaster Coil experience with E-core coil efficiency. Each coil has a unique turns ratio plus there is lower primary resistance than the stock coil. This all amounts to a bolt-in replacement coil that produces more output voltage. The Coils will work with stock ignition systems as well as MSD equipped cars and trucks.

    • Direct performance replacement for GM dual connector coil
    • 85:1 turns ratio and lower primary resistance produce high voltage output
    • Works with stock ignition as well as MSD Ignitions
    • CARB E.O. Approved

    547-8226 Instruction Sheet (pdf)

  • Accel 140003 GM High Energy HEI Super Coil, Red/Yellow
    Accel 140003 GM High Energy HEI Super Coil, Red/Yellow
    x
                Delivers more voltage for faster starting and more efficient combustion. Fits GM HEI '73-'91 vehicles. Features ultra-fine magnet wire, high strength case with cooling ribs, cap head through bolts and carbon brush spring and coil gasket. Street legal. 0.50 OHM. 
            
  • MSD 8200 Blaster 2 Coil - Chrome
    MSD 8200 Blaster 2 Coil - Chrome
    x
                

    If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD Blaster Ignition, MSD 5, 6 or 7, the Blaster Coil line is the right choice. All of the Blaster Coils are designed for improved spark output! Special 100:1 windings are used to provide maximum build-up of voltage! These windings are held secure and kept cool in an oil filled metal canister. The tower assembly is molded of durable alkyd material due to its high dielectric characteristics while wide spaced brass primary terminals prevent the possibility of spark. There are several versions of the Blaster Coil available. All of them have the same internal specifications, but have different housings or components. Each Blaster Coil can be used with a stock ignition, Blaster Ignition, MSD 5, 6 or 7 Ignition Control. Most late model vehicles with electronic ignitions do not require a ballast resistor, check your ignition and manufacturers specifications to determine if a ballast is required in your application.

    547-8200 Instruction Sheet (pdf)

  • MSD 8401 HEI Coil Conversion
    $32.99
    MSD 8401 HEI Coil Conversion
    x
                

    The modified HEI Dust Cover allows you to remove the stock HEI coil in your distributor cap, and replace it with an externally mounted coil such as the Blaster 2. Designed to be installed on stock HEI distributor caps with no modification.

    Instruction Sheet for 547-8401 (pdf)

  • Trans-Dapt 9366 Stand-Up Coil Brackets
    Trans-Dapt 9366 Stand-Up Coil Brackets
    x
                These stand-up coil brackets fit over stock coils. Chrome.
            
  • MSD 8207 Blaster SS Coil
    $49.99
    MSD 8207 Blaster SS Coil
    x
                

    Don’t let the compact size of the Blaster SS Coil fool you, because it is packed with performance! The efficient E-core windings are designed to produce high amounts of current without sacrificing the voltage output. In fact, when used with an MSD 6 Series Ignition, the Blaster SS produces 300 milliamps with a maximum voltage output of 40,000 volts! The secondary windings are wound on a segmented bobbin which reduces the chance of voltage breakdown between the primary and secondary windings. For more protection, these windings are encased in a polyurethane compound for complete protection against vibration. The Blaster SS features brass terminals and a sturdy Rynite housing. It is supplied with a 90° boot, terminal and vibration mounts. A great addition to CD Ignitions and some stock applications.

    • Improved output coil for electronic ignitions, and MSD Ignitions
    • Efficient winding design and assembly creates a compact housing
    • Primary and secondary windings are encased in Ciba polyurethane
    • 70:1 turns ratio and lower primary resistance produce high voltage output
    • Dupont Rynite housing with a tall tower and brass primary terminals

    547-8207 Instructions (PDF)

  • Electronic Ignition Coil
    $24.99
    Electronic Ignition Coil
    x
                

    Oil filled heavy duty coils are guaranteed to out perform your stock unit delivering over 30% more spark energy. The oil filled design and arc resistant top, results in superior performance. The coil delivers the added voltage required by street and strip performance engines, and will fit in most standard OEM brackets. 

    This 12V Ignition Coil will deliver the added voltage required by street and strip performance engines. For use with CD Ignition Control Box 910-2015.

  • Garage Sale - ACCEL GM High Energy HEI Super Coil, Red-Yellow
    Garage Sale
    Garage Sale - ACCEL GM High Energy HEI Super Coil, Red-Yellow
    x
                

    Delivers more voltage for faster starting and more efficient combustion. Fits GM HEI '73-'91 vehicles. Features ultra-fine magnet wire, high strength case with cooling ribs, cap head through bolts and carbon brush spring and coil gasket. Street legal. 0.50 OHM.

     

    This coil is garage sale priced because it has a few small cracks on the top of the housing. 

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

  • Garage Sale - Accel Race 12 Volt Coil
    $39.99
    $59.99
    Garage Sale
    Garage Sale - Accel Race 12 Volt Coil
    x
                

    Accel Race 12 Volt Coil

     

    Clearance item!!

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

     

  • Garage Sale - Accel Racing Coil, 1957-1974 Ford
    Garage Sale
    Garage Sale - Accel Racing Coil, 1957-1974 Ford
    x
                

    Delivers increased voltage and higher spark energy than conventional coils.  Vacuum-filled with premium grade transformer oil.  Spring-loaded, special winding design and silica steel core eliminates failure due to sustained vibration.  Compatible with OEM internal resistance specifications.  For 1957-1974 Ford 12 volt.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

  • Garage Sale - Chrysler Ignition Coil
    $34.99
    $39.99
    Garage Sale
    Garage Sale - Chrysler Ignition Coil
    x
                

    Chrysler Ignition Coil

    56028394AD

    300 Dodge Durango Magnum Ram

    1500 2500 3500 Jeep Grand Cherokee 5.7 V8

    GRAND CHEROKEE 5.7 V8

     

    Clearance item!!

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

     

  • Garage Sale - Steel Coil Mounting Bracket
    Garage Sale
    Garage Sale - Steel Coil Mounting Bracket
    x
                

    The coil bracket offers easy, univer­sal mounting for standard size ignition coils up to 2-1/4" in diameter. The Bracket uses a bolt and nut combination instead of the easily stripped self-tapping screw common on other brand brackets.  Perfect for cannister type coils

     

    This is garage sale priced because it has been discontinued.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS   

  • Garage Sale - Mallory Dual-Point Ignition Conversion
    Garage Sale
    Garage Sale - Mallory Dual-Point Ignition Conversion
    x
                

    Mallory Dual Point Ignition Conversion kit w/Electronic Vacuum Switch. 

    2 - 112 Circuit Breakers

    1 - Solid Circuit Breaker Plate

    1 - 25010 Heavy Duty Condenser

    1 - 25930 Micro-Switch 

     

    Clearance!

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

  • Garage Sale - Accel Performance Coil Cap
    Garage Sale
    Garage Sale - Accel Performance Coil Cap
    x
                

    Accel Performance Coil Cap

     

    Clearance item!!

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

     

  • Garage Sale - Accel Chrysler Racing Coil, Chrome
    Garage Sale
    Garage Sale - Accel Chrysler Racing Coil, Chrome
    x
                

    These coils are garage sale priced because they are new old stock.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS