Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products

Speedway Motors has the heating and air conditioner you need to make your muscle car comfortable again. We offer great prices on new heater cores, sound proof insulation mats and air conditioning kits. Keep your car cool in the summer heat with quality A/C components from Speedway Motors.

Featured Products
Small Block Chevy Inboard A/C Brackets
Small Block Chevy Inboard A/C Brackets
x
            We all know what a pain it is to come up with a pulley, bracket, and belt combination to work on your small block Chevy engine. We have pre-engineered our polished billet aluminum brackets to make this a simple installation. 

Inboard (high) mount brackets for early cars.



Note: S/B Chevy, short style water pump only.
90 Degree Nickel Plated AC Fitting, O-Ring Pilot, -8 AN
90 Degree Nickel Plated AC Fitting, O-Ring Pilot, -8 AN
x
            These handsome nickle plated steel fittings are reuseable.
        
Aeroquip FCF0809 Stainless Steel Braided AC Hose, -8 AN, 9 Ft. Length
Aeroquip FCF0809 Stainless Steel Braided AC Hose, -8 AN, 9 Ft. Length
x
            This is a superior hose for air conditioning applications. The attractive hose has a stainless steel outer braid with a nylon inner tube for excellent refrigerant performance.
        
Vintage Air 03260 SuperFlow Horizontal Condenser
Vintage Air 03260 SuperFlow Horizontal Condenser
x
            

The cool people at Vintage Air technology have done it again! Defining their commitment to creating superior products, Vintage Air offers these SuperFlow condensers. These condensers have a unique micro tube design with improved refrigerant flow to provide much more capacity than any other comparable tube and fin condenser. By providing increased refrigerant contact with the micro tube walls and multiple passes per circuit, SuperFlow condensers furnish more sufficient flow for a more efficient system and much cooler air. Vintage Air SuperFlow condensers are available in horizontal models, which are perfect for late model cars. They offer more grille area and most include universal mount bracket kits. Oh, and by the way, increased condenser capacity means that more heat is dissipated, pressure drops, and your compressor turns more easily. "So what," you say? Well, if your engine isn't working as hard, you gain a boost of horsepower! Cool, huh? Vintage Air--the people who know all about living cool.

  • Micro tube design with improved refrigerant flow
  • More sufficient flow for a more efficient system and much cooler air
  • Horizontal model - perfect for late model cars
  • Includes mounting brackets
  • 14" tall x 18" wide x .83" thick
  • Male o-ring fittings, #8 top and #6 bottom fitting

"Muscle Car, HVAC" Page 1 of 4

  • 90 Degree Crimp-On O-Ring Heater Hose Fitting, -10 AN
    90 Degree Crimp-On O-Ring Heater Hose Fitting, -10 AN
    x
                

    These premium -10 size (7/8" x 14 TPI) crimp-on hose fittings feature O-ring seals and a 90 degree bend. Ideal for use with heater bulkhead plates.

    Note: Will need to be crimped by your local shop. 

  • Holley 20-132 LS Accessory Drive Bracket-ALT, P/S, A/C
    Holley 20-132 LS Accessory Drive Bracket-ALT, P/S, A/C
    x
                Please view the product's page for more information
            
  • Air Conditioning Kit w/ Condenser
    Air Conditioning Kit w/ Condenser
    x
                

    The days of riding around trying to look cool while sweating your butt off are gone! So is going to the junkyard and trying to find used parts to cobble up an a/c system. These kits have three dash vents and two defrost ducts and are engineered for 1930's coupes, pick-ups and smaller cars.

    These are designed with both the a/c evaporator and heater core in one unit which helps keep size and installation time down. They fit under the dash just like a new car and allow disassembly without removing the unit from the car.

    They include dash louvers, defrost louvers, switch panel, a/c hose kit, dryer with switch, Sanden 508 compressor  with V-belt pulley, and evaporator/heater assembly. They are available with or without condenser and standard finish or deluxe polished aluminum compressor.

    Hoses will need to be crimped by your local shop. R134a Freon required, but not supplied. Compressor brackets and heater hoses sold separately.

    Instructions (PDF) 

  • 90 Degree Nickel Plated AC Fitting, -6 AN
    90 Degree Nickel Plated AC Fitting, -6 AN
    x
                These handsome nickle plated steel fittings are reuseable.
            
  • Aeroquip FCF0603 Stainless Steel Braided AC Hose, -6 AN, 3 Ft. Length
    Aeroquip FCF0603 Stainless Steel Braided AC Hose, -6 AN, 3 Ft. Length
    x
                

    This is a superior hose for air conditioning applications. The attractive hose has a stainless steel outer braid with a nylon inner tube for excellent refrigerant performance.

    .33" I.D. - 3 Ft. length

  • Straight Nickel Plated AC Fitting, O-Ring Pilot, -10 AN
    Straight Nickel Plated AC Fitting, O-Ring Pilot, -10 AN
    x
                These handsome nickle plated steel fittings are reuseable.
            
  • A/C Hose Kit
    $89.99
    Product Rating: 5.00 Stars
    A/C Hose Kit
    x
                

    These air conditioning hose kits include enough hose and fittings to allow a normal installation in applications without bulkhead fittings. 

    • (2) Band Clamps
    • (4) AN6 Straight
    • (1) AN8 Straight
    • (1) AN10 Straight
    • (2) AN6 90 Degree
    • (1) AN8 90 Degree
    • (1) AN10 90 Degree
    • (1) AN8 90 Degree with Service Port
    • (1) AN10 90 Degree with Service Port
    • (4) #6 O-Rings
    • (2) #8 O-Rings
    • (2) #10 O-Rings
    • (2) Grommets
    • 6 ft #6 Hose
    • 5 ft #8 Hose
    • 4 ft #10 Hose

     

    Fittings will need to be crimped at your local shop.

  • Speedway Universal Fit Street Rod Heater, 12 Volt, 20,000 BTU
    Speedway Universal Fit Street Rod Heater, 12 Volt, 20,000 BTU
    x
                

    These all new universal street rod heaters give you the option of heat in your custom ride with the ease of installation.  They feature a compact size, two-speed fan, and rear fan guard.

    • 9-1/2" x 6-1/2" x 7"
    • Adjustable louver to direct heat flow
    • 12V 20,000 BTU heater
    • Has rear exit hose connections for convenient mounting
  • 1955-1956 Chevy Car Heater Core
    1955-1956 Chevy Car Heater Core
    x
                

    These are a 100% new, factory replacement Tri-Five heater core. Not a marginal recore like others sell. For '55-'56 Chevrolet cars without factory air conditioning. We also recommend the mounting plate, which is normally rusted beyond use.

    Note: General Motors produced two different style heater cores for these vehicles. The heater cores we carry are a reproduction of the "deluxe" model, not the "standard."

  • Small Block Chevy Inboard Drive Kits, Alternator & AC
    Small Block Chevy Inboard Drive Kits, Alternator & AC
    x
                

    We all know what a pain it is to come up with a pulley, bracket, and belt combination to work on your small block Chevy engine. We have pre-engineered our package to include the nuts, bolts, polished billet aluminum brackets and belts to make this a simple installation. Each kit also includes a new short style aluminum water pump, aluminum pulleys, one wire chrome alternator and if chosen, a chrome A/C compressor. 

    Inboard (high) mount brackets for early cars.

    Alternator and A/C kits include dual groove pulleys.

    Bracket kit works with dual quad & 3-2 low rise intakes.

    Note: S/B Chevy, short style water pump only.

  • Small Block Chevy Inboard A/C Brackets
    Small Block Chevy Inboard A/C Brackets
    x
                We all know what a pain it is to come up with a pulley, bracket, and belt combination to work on your small block Chevy engine. We have pre-engineered our polished billet aluminum brackets to make this a simple installation. 

    Inboard (high) mount brackets for early cars.



    Note: S/B Chevy, short style water pump only.
  • Dynatech   794-03006 Musclemaxx S/B Chevy A/C Mounting Bracket
    Dynatech 794-03006 Musclemaxx S/B Chevy A/C Mounting Bracket
    x
                Dynatech® has introduced a convenient and  clutter-free way to mount the OEM air conditioning compressor on your  small block Chevy. Kit includes bracket and two mounting bolts.
            
  • Aeroquip FCF0803 Stainless Steel Braided AC Hose, -8 AN, 3 Ft. Length
    Aeroquip FCF0803 Stainless Steel Braided AC Hose, -8 AN, 3 Ft. Length
    x
                This is a superior hose for air conditioning applications. The attractive hose has a stainless steel outer braid with a nylon inner tube for excellent refrigerant performance.
            
  • AC O-Rings - Replacement AN6 AC O-Rings - Set of 6
    AC O-Rings - Replacement AN6 AC O-Rings - Set of 6
    x
                Replacement o-rings in an assortment of AN sizes for your air conditioning system.   
            
  • Air Conditioning Condenser, 14 x 18 Inch
    Air Conditioning Condenser, 14 x 18 Inch
    x
                

    Horizontal mount aluminum A/C condenser with parallel flow. Core measures 14" tall and 18" wide. Overall width with brackets is 20".

    Has one 3/4"-16 UNF fitting and one 16mm X 1.5 fitting.



  • Diamond AC Bulkhead Plates with Fittings
    Diamond AC Bulkhead Plates with Fittings
    x
                

    When you have to run air conditioning and heater hoses through your firewall, the only way to make it look good is to use bulkhead plates. We make it easy for you to order because we include the four heater hose fittings and two a/c hose fittings required to finish the job.

    Kit includes:

    • (1) straight fitting for -6 AC hose
    • (1) 90° fitting for -6 AC hose
    • (1) straight fitting for -10 AC hose
    • (1) 90° fitting for -10 AC hose
    • (2) straight fittings for 5/8" heater hose
    • (2) 90° fittings for 5/8" heater hose
    • (1) bulkhead plate, 2-1/2" x 4-1/2"

    You will need to have the fittings crimped on the hoses by your local shop.

  • Slim Line Heat/Air Unit
    $359.99
    Slim Line Heat/Air Unit
    x
                This low profile under the dash mount heat/cool unit is 26.25" wide 5.25" tall and 12" deep. Features a three speed blower, heat/cool adjustment, defroster duct hook-ups, and three 1" x 5" front adjusting vents. Easy to install with mounting slots on the sides of the unit all plumbing and wiring done from the back side of the unit. Will handle 18,000 BTU's based on a Sanden or Sankyo 508 compressor at 60 MPH. The blower motor is capable of 240 CFM. Minimum condenser dimensions would be 12"X18" but would prefer a 14"X20" sized condenser, or 280 sq. in.
            
  • 508 Chrome AC Compressor
    $269.99
    508 Chrome AC Compressor
    x
                The Sanden type 508 compressor provides ample capacity for even large interiors and will enhance the appearance of your engine compartment.
            
  • 90 Degree Nickel Plated AC Fitting, O-Ring Pilot, -10 AN
    90 Degree Nickel Plated AC Fitting, O-Ring Pilot, -10 AN
    x
                These handsome nickle plated steel fittings are reuseable.
            
  • 1957 Chevy Car Heater Core
    $199.99
    1957 Chevy Car Heater Core
    x
                

    These are a 100% new, factory replacement Tri-Five heater core. Not a marginal recore like others sell. For '57 Chevrolet cars without factory air conditioning. We also recommend the mounting plate, which is normally rusted beyond use.

    Note: General Motors produced two different style heater cores for these vehicles.  The heater cores we carry are a reproduction of the "deluxe" model, not the "standard."

  • Straight Nickel Plated AC Fitting, O-Ring Pilot, -6 AN
    Straight Nickel Plated AC Fitting, O-Ring Pilot, -6 AN
    x
                These handsome nickle plated steel fittings are reuseable.
            
  • Crimp-On A/C O-Ring Fitting, 90 Degree, -6 AN
    Crimp-On A/C O-Ring Fitting, 90 Degree, -6 AN
    x
                90° elbow A/C O-ring crimp fitting with in a -6 (5/8" x 18 TPI) size.
            
  • 90 Degree Nickel Plated AC Fitting, O-Ring Pilot, -8 AN
    90 Degree Nickel Plated AC Fitting, O-Ring Pilot, -8 AN
    x
                These handsome nickle plated steel fittings are reuseable.
            
  • Replacement Heater Core for 1967 Chevy Camaro
    Replacement Heater Core for 1967 Chevy Camaro
    x
                For your 1967 Camaro, use a 100% new heater core, not a marginal    recore like others sell. All heater cores listed are a direct fit   factory replacement for applications without A/C and non-396 V8 cars.
    • All new construction, not a recore like others sell
    • Direct fit factory replacement
    • Not intended to work with original 396 V8 option cars
    Note: These heater cores will be shipped either aluminum or copper/brass, depending on stock.
  • Air Conditioning Condenser, 12 x 19-1/2 Inch
    Air Conditioning Condenser, 12 x 19-1/2 Inch
    x
                

    Horizontal mount aluminum A/C condenser with parallel flow. This is 12" wide by 19-5/8" tall with fittings on passenger/right hand side. Top fitting is 90 degree pointed down and lower fitting is straight point out horizontal.

    Has one -6 AN and one -8 AN fitting.

  • Straight Nickel Plated AC Fitting, O-Ring Pilot, -8 AN
    Straight Nickel Plated AC Fitting, O-Ring Pilot, -8 AN
    x
                These handsome nickle plated steel fittings are reuseable.
            
  • Aeroquip FCF0809 Stainless Steel Braided AC Hose, -8 AN, 9 Ft. Length
    Aeroquip FCF0809 Stainless Steel Braided AC Hose, -8 AN, 9 Ft. Length
    x
                This is a superior hose for air conditioning applications. The attractive hose has a stainless steel outer braid with a nylon inner tube for excellent refrigerant performance.
            
  • Heater Core for 1965-67 Ford Galaxie and Custom Passenger Car
    Heater Core for 1965-67 Ford Galaxie and Custom Passenger Car
    x
                For your 1965-67 Ford / Mercury passenger car, use a 100% new heater core,   not a marginal   recore like others sell. All heater cores are a   direct fit  factory replacement for applications without A/C. 
    • All new construction
    • Direct fit factory replacement for 1965-67 Ford Galaxie and Custom
    • Please note: non air applications

    Note: These heater cores may be shipped either aluminum or copper/brass, depending on application & inventory/stock. 

  • Heater Core for 1969-70 GM Full Size Passenger Car
    Heater Core for 1969-70 GM Full Size Passenger Car
    x
                For your 1969-70 GM full size passenger car, use a 100% new  heater core, not a marginal recore like others sell. All heater cores  are a direct fit factory replacement for applications not originally  equipped with A/C.
    • All new construction
    • Direct fit factory replacement for 1969-70 GM FULL SIZE
    Note: These heater cores may be shipped either aluminum or copper/brass, depending on application & inventory/stock.
  • Under Dash AC Unit
    $229.99
    $279.99
    Under Dash AC Unit
    x
                

    Looking for a simple under-the-dash A/C cooling unit? This compact air conditioning control box is just 16" long 4.25" tall and 11" deep. This unit features two large 2" X 6" air vents in front with a three-speed blower motor and cooling control adjustment.

    Note:  This unit consists of the AC evaporator, duct assembly and blower motor for the under dash use.  It will require the additional items of the compressor, hose kit, dryer and condenser to complete the A/C system.

  • Heater Core for 1963-64 GM Mid Size Passenger Car w/ Factory Air
    Heater Core for 1963-64 GM Mid Size Passenger Car w/ Factory Air
    x
                For your 1963-64 GM Full Size passenger car, use a 100% new heater core,   not a marginal   recore like others sell. All heater cores are a   direct fit  factory replacement for applications with A/C. 
    • All new construction
    • Direct fit factory replacement for 1963-64 GM Full Size passenger car with factory air
    • Please note: factory air applications

    Note: These heater cores may be shipped either aluminum or copper/brass, depending on application & inventory/stock. 

  • 1964-68 Mustang Heater Core
    $69.99
    1964-68 Mustang Heater Core
    x
                Here is a 100% new heater core, not a marginal recore like others sell, for your 1964-1968 Mustang. For cars without factory air conditioning.
            
  • Heater Core for 1971-90 GM Full Size Passenger Car
    Heater Core for 1971-90 GM Full Size Passenger Car
    x
                For your 1971-90 GM Full Size passenger car, use a 100% new heater core, not a marginal   recore like others sell. All heater cores listed are a direct fit  factory replacement for applications without A/C. 
    • All new construction
    • Direct fit factory replacement
    • Please note: non air applications

    Note: These heater cores may be shipped either aluminum or copper/brass, depending on application & inventory/stock. 

  • 1965-67 Chevelle Heater Core
    $74.99
    1965-67 Chevelle Heater Core
    x
                For a 1965-1967 Chevelle. These are 100% new heater cores. Not marginal recores like others sell. All heater cores listed are for cars without factory air conditioning. 
            
  • Aeroquip FCF1003 Stainless Steel Braided AC Hose, -10 AN, 3 Ft. Length
    Aeroquip FCF1003 Stainless Steel Braided AC Hose, -10 AN, 3 Ft. Length
    x
                This is a superior hose for air conditioning applications. The attractive hose has a stainless steel outer braid with a nylon inner tube for excellent refrigerant performance.
            
  • Straight Nickel Plated AC Fitting w/Port, -6 AN to -6 AN
    Straight Nickel Plated AC Fitting w/Port, -6 AN to -6 AN
    x
                These handsome nickel plated steel fittings are reuseable. This AN6 straight fitting features a high side R134a port.
            
  • Heater Core for 1966-71 Dodge Charger and Coronet
    Heater Core for 1966-71 Dodge Charger and Coronet
    x
                For your 1966-71 Charger / Coronet, use a 100% new heater core,    not a marginal   recore like others sell. All heater cores are a    direct fit  factory replacement for applications without A/C. 
    • All new construction
    • Direct fit factory replacement for 1966-71 Dodge Charger and Coronet
    • Please note non air applications

    Note: These heater cores may be shipped either aluminum or copper/brass, depending on application & stock. 

  • 135 Degree Nickel Plated AC Fitting, O-Ring Pilot w/Port, -10 AN
    135 Degree Nickel Plated AC Fitting, O-Ring Pilot w/Port, -10 AN
    x
                These handsome nickel plated steel fittings are reuseable. This 135 degree AN10 fitting features a low side R134a port.
            
  • Heater Core for 1967-72 Ford / Mercury Passenger Car w/ Factory Air
    Heater Core for 1967-72 Ford / Mercury Passenger Car w/ Factory Air
    x
                For your 1967-72 Ford / Mercury Mid Size passenger car, use a 100% new heater core,   not a marginal   recore like others sell. All heater cores are a   direct fit  factory replacement for applications with A/C. 
    • All new construction
    • Direct fit factory replacement for:
      • 1967-72 Ford Mustang / Mercury Cougar with factory air
      • 1969-72 Comet with factory air
      • 1970-72 Pinto / Maverick with factory air
    • Please note: factory air applications

    Note: These heater cores may be shipped either aluminum or copper/brass, depending on application & inventory/stock. 

  • Heater Core for 1962 Chevrolet Impala
    $111.99
    $139.99
    Heater Core for 1962 Chevrolet Impala
    x
                For your 1962 GM Full Size passenger car, use a 100% new heater core,   not a marginal   recore like others sell. All heater cores are a   direct fit  factory replacement for applications without A/C. 
    • All new construction
    • Direct fit factory replacement for 1962 Chevrolet Impala
    • Please note: non air applications

    Note: These heater cores may be shipped either aluminum or copper/brass, depending on application & inventory/stock. 

Goto Previous PagePrevious Page
1 2 3 4