Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Filter

Page 1 of 3

Products

Fuel Tanks

Shop Muscle Car Air & Fuel Delivery At Speedway Motors

Speedway Motors stocks all the best names in American muscle car carburetors and intake manifolds! Plus, we have a great selection of fuel cells and gas pedals, as well as electric and mechanical fuel pumps. Don't forget to let your engine breath with filters from K&N and R2C. Speedway can fuel your need for speed!

Featured Products
  • Tanks Inc. TM46C-T EFI Fuel Tank Kit, 1971-72 Chevy Nova
    New
    Tanks Inc. TM46C-T EFI Fuel Tank Kit, 1971-72 Chevy Nova
    (Part #91076243)
    x
                

    These all-inclusive EFI Ready steel fuel tanks from Tanks Inc. take the headache out of converting your classic to modern LS power.  Each kit comes complete with a high-flow (255 liters p/hr) in-tank Walbro pump that supports up to 630 hp.  Also included are a sending unit (Ohms will match the make/model/year application of tank), fill neck, and hose (if applicable).

    • Steel Construction
    • Powder Coated Finish
    • Sold Individually
    • Only offered with a GPA-4 pump
      • Made in the USA
      • Heavy 10 gauge no-warp mounting plate
      • 1/4" NPT Supply and Return Line
      • Barbed Vent Fitting
      • Oven brazed fittings
      • Up to 100 PSI
      • In-tank wire harness 
      • Genuine Walbro Fuel Pumps

    Fits:

    •  1971-1972 Chevy Nova, Ventura
  • EMPI 3899 Pol Stainless Steel Fuel Tank, 10x40 In, End Fill, 13.5 Gal
    EMPI 3899 Pol Stainless Steel Fuel Tank, 10x40 In, End Fill, 13.5 Gal
    (Part #1413899)
    x
                

    Highly Polished 100% Stainless Steel...Great looks and No Rust...ever!  Stronger with a more durable finish - that won't dull - like polished aluminum.  Available in 5 lengths, 10" diameter and include 2 polished stainless steel straps, stainless steel hardware, and a black plastic gas cap.

    • 10" x 40"
    • End location filler neck
    • 13-1/2 gallon capacity
    • Polished stainless steel
    • Designed for Off-Road use 
    • Cap and straps included

    Note: Gallon measurement is an approximation only.

    Note: When installing a fitting or shut-off valve, caution must be taken not to over-torque and crack or break the fuel outlet. (See alternate photo)

  • EMPI 3898 Pol Stainless Steel Fuel Tank, 10x33 In, End Fill, 10.5 Gal
    EMPI 3898 Pol Stainless Steel Fuel Tank, 10x33 In, End Fill, 10.5 Gal
    (Part #1413898)
    x
                

    Highly Polished 100% Stainless Steel...Great looks and No Rust...ever!  Stronger with a more durable finish - that won't dull - like polished aluminum.  Available in 5 lengths, 10" diameter and include 2 polished stainless steel straps, stainless steel hardware, and a black plastic gas cap.

    • 10" x 33"
    • 1/4" NPT
    • End location filler neck
    • 10-1/2 gallon capacity
    • Polished stainless steel
    • Designed for Off-Road use 
    • Cap and straps included

    Note: Gallon measurement is an approximation only.

    Note: When installing a fitting or shut-off valve, caution must be taken not to over-torque and crack or break the fuel outlet. (See alternate photo)

  • Tanks Inc. TM34U-T EFI Fuel Tank Kit, 1971-72 Chevelle
    New
    Tanks Inc. TM34U-T EFI Fuel Tank Kit, 1971-72 Chevelle
    (Part #91076229)
    x
                

    These all-inlcusive EFI Ready steel fuel tanks from Tanks Inc. take the headache out of converting your classic to modern LS power.  Each kit comes complete with a high-flow (255 liters p/hr) in-tank Walbro pump that supports up to 630 hp. Also included are a sending unit (Ohms will match the make/model/year application of tank), fill neck, and hose (if applicable).

    • Steel Construction
    • Powder Coated Finish
    • Sold Individually
    • 20 Gallon Capacity
    • Only offered with a GPA-4 pump
      • Made in the USA
      • Heavy 10 gauge no-warp mounting plate
      • 1/4" NPT Supply and Return Line
      • Barbed Vent Fitting
      • Oven brazed fittings
      • Up to 100 PSI
      • In-tank wire harness 
      • Genuine Walbro Fuel Pumps

    Fits:

    • 1971-1972 Chevy Chevelle
  • 1955-56 Chevy Car Fuel Tank, 16 Gallon, OEM Replacement
    1955-56 Chevy Car Fuel Tank, 16 Gallon, OEM Replacement
    (Part #9107226)
    x
                

    These OEM replacement gas tanks are designed to fit in stock 1955-56 Chevy passenger cars. They feature quality satin coated steel construction with square welds.

    • High quality OEM replacement tanks
    • Satin coated steel
    • Complete your installation with a new fuel sender and straps
  • EMPI 3895 Pol Stainless Steel Fuel Tank, 10x16 In., Center Fill, 5 Gal
    EMPI 3895 Pol Stainless Steel Fuel Tank, 10x16 In., Center Fill, 5 Gal
    (Part #1413895)
    x
                

    Highly Polished 100% Stainless Steel...Great looks and No Rust...ever!  Stronger with a more durable finish - that won't dull - like polished aluminum.  Available in 5 lengths, 10" diameter and include 2 polished stainless steel straps, stainless steel hardware, and a black plastic gas cap.

    • 10" x 16"
    • Center location filler neck
    • 5 gallon capacity
    • Polished stainless steel
    • Designed for Off-Road use 
    • Cap and straps included

    Note: Gallon measurement is an approximation only.

    Note: When installing a fitting or shut-off valve, caution must be taken not to over-torque and crack or break the fuel outlet. (See alternate photo)

  • 1957 Chevy Passenger Car Fuel Tank, 16 Gallon, OEM Replacement
    1957 Chevy Passenger Car Fuel Tank, 16 Gallon, OEM Replacement
    (Part #91072400)
    x
                These quality replacement fuel tanks are designed to fit 1957 Chevy passenger cars.  They feature square welds with a satin coated steel finish.
    • 1957 CHEVY CAR
    • SQUARE WELD
    • High quality OEM replacement tanks 
    • Satin coated steel
    • O-rings, seals, and screws included
    • Complete your installation with a new fuel sender and straps
  • EMPI 3896 Pol. Stainless Steel Fuel Tank, 10x24 In., End Fill, 7.5 Gal
    EMPI 3896 Pol. Stainless Steel Fuel Tank, 10x24 In., End Fill, 7.5 Gal
    (Part #1413896)
    x
                

    Highly Polished 100% Stainless Steel...Great looks and No Rust...ever!  Stronger with a more durable finish - that won't dull - like polished aluminum.  Available in 5 lengths, 10" diameter and include 2 polished stainless steel straps, stainless steel hardware, and a black plastic gas cap.

    • 10" x 24"
    • End location filler neck
    • 7-1/2 gallon capacity
    • Polished stainless steel
    • Designed for Off-Road use 
    • Cap and straps included

    Note: Gallon measurement is an approximation only.

    Note: When installing a fitting or shut-off valve, caution must be taken not to over-torque and crack or break the fuel outlet. (See alternate photo)

     

Filter

"Muscle Car, Fuel Tanks" Page 1 of 3

Page 1 of 3

  • Tanks Inc. TM34H-T EFI Fuel Tank Kit, 1971-72 Buick Skylark
    New
    Tanks Inc. TM34H-T EFI Fuel Tank Kit, 1971-72 Buick Skylark
    (Part #91076222)
    x
                

    These all-inlcusive EFI Ready steel fuel tanks from Tanks Inc. take the headache out of converting your classic to modern LS power.  Each kit comes complete with a high-flow (255 liters p/hr) in-tank Walbro pump that supports up to 630 hp.   Also included are a sending unit (Ohms will match the make/model/year application of tank), fill neck, and hose (if applicable).

    • 20 Gallon Capacity
    • Steel Construction
    • Powder Coated Finish
    • Sold Individually
    • Only offered with a GPA-4 pump
      • Made in the USA
      • Heavy 10 gauge no-warp mounting plate
      • 1/4" NPT Supply and Return Line
      • Barbed Vent Fitting
      • Oven brazed fittings
      • Up to 100 PSI
      • In-tank wire harness 
      • Genuine Walbro Fuel Pumps

    Fits:

    • 1971-1972 Buick Skylark ,GS, GS 455
  • 1964-67 Chevelle / Malibu Fuel Tank w/ Filler Neck, 20 Gallon
    1964-67 Chevelle / Malibu Fuel Tank w/ Filler Neck, 20 Gallon
    (Part #91072537)
    x
                These OEM replacement gas tanks are designed to fit  in stock 1964-67 Chevelle/Malibu, except station wagon. They feature  quality satin coated steel construction with a natural finish.
    • 1964-67 CHEVELLE/MALIBU, EXCEPT STATION WAGON
    • With fill neck
    • High quality OEM replacement tanks
    • Satin coated steel
    • Complete your installation with a new fuel sender and straps
  • EMPI 3897 Pol. Stainless Steel Fuel Tank, 10x30 In., End Fill, 9.5 Gal
    EMPI 3897 Pol. Stainless Steel Fuel Tank, 10x30 In., End Fill, 9.5 Gal
    (Part #1413897)
    x
                

    Highly Polished 100% Stainless Steel...Great looks and No Rust...ever!  Stronger with a more durable finish - that won't dull - like polished aluminum.  Available in 5 lengths, 10" diameter and include 2 polished stainless steel straps, stainless steel hardware, and a black plastic gas cap.

    • 10" x 30"
    • End location filler neck
    • 9-1/2 gallon capacity
    • Polished stainless steel
    • Designed for Off-Road use 
    • Cap and straps included

    Note: Gallon measurement is an approximation only.

    Note: When installing a fitting or shut-off valve, caution must be taken not to over-torque and crack or break the fuel outlet. (See alternate photo)

  • EMPI 3896 Pol. Stainless Steel Fuel Tank, 10x24 In., End Fill, 7.5 Gal
    EMPI 3896 Pol. Stainless Steel Fuel Tank, 10x24 In., End Fill, 7.5 Gal
    (Part #1413896)
    x
                

    Highly Polished 100% Stainless Steel...Great looks and No Rust...ever!  Stronger with a more durable finish - that won't dull - like polished aluminum.  Available in 5 lengths, 10" diameter and include 2 polished stainless steel straps, stainless steel hardware, and a black plastic gas cap.

    • 10" x 24"
    • End location filler neck
    • 7-1/2 gallon capacity
    • Polished stainless steel
    • Designed for Off-Road use 
    • Cap and straps included

    Note: Gallon measurement is an approximation only.

    Note: When installing a fitting or shut-off valve, caution must be taken not to over-torque and crack or break the fuel outlet. (See alternate photo)

     

  • Tanks Inc. TM34I-T EFI Fuel Tank Kit, 1971-72 Pontiac GTO
    New
    Tanks Inc. TM34I-T EFI Fuel Tank Kit, 1971-72 Pontiac GTO
    (Part #91076223)
    x
                

    These all-inlcusive EFI Ready steel fuel tanks from Tanks Inc. take the headache out of converting your classic to modern LS power.  Each kit comes complete with a high-flow (255 liters p/hr) in-tank Walbro pump that supports up to 630 hp. Also included are a sending unit (Ohms will match the make/model/year application of tank), fill neck, and hose (if applicable).

    • 20 Gallon Capacity
    • Steel Construction
    • Powder Coated Finish
    • Sold Individually
    • Only offered with a GPA-4 pump
      • Made in the USA
      • Heavy 10 gauge no-warp mounting plate
      • 1/4" NPT Supply and Return Line
      • Barbed Vent Fitting
      • Oven brazed fittings
      • Up to 100 PSI
      • In-tank wire harness 
      • Genuine Walbro Fuel Pumps

    Fits:

    • 1971-1972 Pontiac GTO, Le Mans

     

  • Garage Sale - RCI 16 Gallon Steel Fuel Cell, Black
    Garage Sale
    Garage Sale - RCI 16 Gallon Steel Fuel Cell, Black
    (Part #UP50905)
    x
                

    This fuel cell is garage sale priced because the top of the can was damaged in shipping. 

     No Warranty, No Returns On Garage Sale Items

    RCi Circle Track steel can fuel cells are manufactured with a cross-linked, high strength polyethylene bladder. Pickup hose is designed to pick up from right rear corner. All cans are spotwelded and powdercoated in Black. 

    • 16 gallon capacity 
    • Includes a flapper on lid assembly
    • AN8 male pick-up (right rear)
    • AN8 male rollover vent
    • 25L X 19W X 11H (includes outer lip), can itself is one inch less in length and width
  • Garage Sale - Fuel Check Ball Valve
    $80.99
    $89.99
    Garage Sale
    Garage Sale - Fuel Check Ball Valve
    (Part #91011714)
    x
                

    Valve has AN12 ends.

     

    Clearance!

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

     

  • 1968-70 Dodge / Chrysler Passenger Car Fuel Tank, 18 Gallon
    1968-70 Dodge / Chrysler Passenger Car Fuel Tank, 18 Gallon
    (Part #91072613)
    x
                

    These OEM replacement gas tanks are designed to fit in stock 1968-70 Dodge/Chrysler passenger cars. They feature quality satin coated steel construction with a natural finish.

    • 1968-70 VALIANT / 68-69 CUDA
    • High quality OEM replacement tanks 
    • Without vent pipe
    • Satin coated steel
    • Complete your installation with a new fuel sender and straps
  • Tanks Inc. TM41-T EFI Fuel Tank Kit, 1966-67 Chevy II/Nova
    New
    Tanks Inc. TM41-T EFI Fuel Tank Kit, 1966-67 Chevy II/Nova
    (Part #91076240)
    x
                

    These all-inlcusive EFI Ready steel fuel tanks from Tanks Inc. take the headache out of converting your classic to modern LS power.  Each kit comes complete with a high-flow (255 liters p/hr) in-tank Walbro pump that supports up to 630 hp.  Also included are a sending unit (Ohms will match the make/model/year application of tank), fill neck, and hose (if applicable).

    • Steel Construction
    • Powder Coated Finish
    • Sold Individually
    • 16 Gallon Capacity
    • Only offered with a GPA-4 pump
      • Made in the USA
      • Heavy 10 gauge no-warp mounting plate
      • 1/4" NPT Supply and Return Line
      • Barbed Vent Fitting
      • Oven brazed fittings
      • Up to 100 PSI
      • In-tank wire harness 
      • Genuine Walbro Fuel Pumps

    Fits:

    •  1966-1967 Chevy II, Nova
  • 1963-67 Corvette Fuel Tank, 20-1/2 Gallon, OEM Replacement
    1963-67 Corvette Fuel Tank, 20-1/2 Gallon, OEM Replacement
    (Part #91072492)
    x
                These OEM replacement gas tanks are designed to fit  in stock 1963-67 Corvette. They feature quality satin coated steel  construction with a natural finish.
    • 1963-67 CORVETTE
    • High quality OEM replacement tanks
    • Satin coated steel
    • Complete your installation with a new fuel sender and straps
  • 1967-68 Camaro/Firebird Fuel Tank, 18 Gallon, OEM Replacement
    1967-68 Camaro/Firebird Fuel Tank, 18 Gallon, OEM Replacement
    (Part #91072601)
    x
                

    These OEM replacement gas tanks are designed to fit in stock 1967-68 Camaro/Firebirds. They feature quality satin coated steel construction with a natural finish.

    • High quality OEM replacement tanks
    • Satin coated steel
    • Complete your installation with a new fuel sender and straps
  • Tanks Inc. TM34R-T EFI Fuel Tank Kit, 1970-72 Buick/Oldsmobile Cutlass
    New
    Tanks Inc. TM34R-T EFI Fuel Tank Kit, 1970-72 Buick/Oldsmobile Cutlass
    (Part #91076228)
    x
                

    These all-inlcusive EFI Ready steel fuel tanks from Tanks Inc. take the headache out of converting your classic to modern LS power.  Each kit comes complete with a high-flow (255 liters p/hr) in-tank Walbro pump that supports up to 630 hp. Also included are a sending unit (Ohms will match the make/model/year application of tank), fill neck, and hose (if applicable).

    • Steel Construction
    • Powder Coated Finish
    • 20 Gallon Capacity
    • Sold Individually
    • Only offered with a GPA-4 pump
      • Made in the USA
      • Heavy 10 gauge no-warp mounting plate
      • 1/4" NPT Supply and Return Line
      • Barbed Vent Fitting
      • Oven brazed fittings
      • Up to 100 PSI
      • In-tank wire harness 
      • Genuine Walbro Fuel Pumps

    Fits:

    • 1970-1972 Oldsmobile Cutlass
    • 1970 Buick Skylark
  • Garage Sale - Jaz Products 22 Gallon Steel Can Fuel Cell
    Garage Sale
    Garage Sale - Jaz Products 22 Gallon Steel Can Fuel Cell
    (Part #UP31054)
    x
                 The 20 gauge steel can encloses a tough cross-link polyethylene cell. Includes fuel cell, steel can, IMCA required tip-over valve, and 4" diameter twist-on cap. Has a -8 AN fuel line hookup and return vent.Safety foam sold separately.
    • Seamless cross-linked polyethylene inner shell
    • 20 gauge welded steel container powder coated red
    • D-Ring bail handle cap assembly
    • Anodized -8 AN fuel pickup
    • Anodized -8 AN tip-over valve vent
    • Pickup hose routed to right rear corner
  • Garage Sale - 1932 Ford Polyethylene Fuel Tank
    Garage Sale
    Garage Sale - 1932 Ford Polyethylene Fuel Tank
    (Part #UP23494)
    x
                This inexpensive, 14 gallon capacity poly tank comes with a fiberglass cover and a bolt-on steel neck with a billet cap. The neck and cover can be painted to match your car for a total original look. (The bottom of tank will be a contrasting black).

    This tank also features a top mounted pick-up tube, internal baffling, roll over vent valve, sender mount for all aftermarket senders, and has been leak tested.

    Note:  Frame/Cross bar shown in photo are for installation/photo purposes only and are not included with this tank.

     

    This is garage sale priced because it is missing the fittings and tube.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

  • 1967-68 Ford / Mercury Fuel Tank, 16 Gallon, OEM Replacement
    1967-68 Ford / Mercury Fuel Tank, 16 Gallon, OEM Replacement
    (Part #91072500)
    x
                These OEM replacement gas tanks are designed to fit in stock 1964-68 Ford/Mercury passenger cars. They feature quality satin coated steel  construction  with a natural finish.
    • 1964-68 MUSTANG / 67-68 COUGAR, W/DRAIN PLUG
    • High quality OEM replacement tanks 
    • Satin coated steel
    • Complete your installation with a new fuel sender and straps
  • 1957 Chevy Passenger Car Fuel Tank, 16 Gallon, OEM Replacement
    1957 Chevy Passenger Car Fuel Tank, 16 Gallon, OEM Replacement
    (Part #91072400)
    x
                These quality replacement fuel tanks are designed to fit 1957 Chevy passenger cars.  They feature square welds with a satin coated steel finish.
    • 1957 CHEVY CAR
    • SQUARE WELD
    • High quality OEM replacement tanks 
    • Satin coated steel
    • O-rings, seals, and screws included
    • Complete your installation with a new fuel sender and straps
  • Tanks Inc. TM37H-T EFI Fuel Tank Kit, 1965-67 Pontiac GTO
    New
    Tanks Inc. TM37H-T EFI Fuel Tank Kit, 1965-67 Pontiac GTO
    (Part #91076235)
    x
                

    These all-inlcusive EFI Ready steel fuel tanks from Tanks Inc. take the headache out of converting your classic to modern LS power.  Each kit comes complete with a high-flow (255 liters p/hr) in-tank Walbro pump that supports up to 630 hp.   Also included are a sending unit (Ohms will match the make/model/year application of tank), fill neck, and hose (if applicable).

    • Steel Construction
    • Powder Coated Finish
    • Sold Individually
    • Only offered with a GPA-4 pump
      • Made in the USA
      • Heavy 10 gauge no-warp mounting plate
      • 1/4" NPT Supply and Return Line
      • Barbed Vent Fitting
      • Oven brazed fittings
      • Up to 100 PSI
      • In-tank wire harness 
      • Genuine Walbro Fuel Pumps

    Fits:

    • 1965-1967 Pontiac GTO, Le Mans, Tempest
  • Garage Sale - Total Performance Poly Liner, 10 Feet
    Garage Sale
    Garage Sale - Total Performance Poly Liner, 10 Feet
    (Part #715P101)
    x
                

    Clear poly strip comes in a 10 foot roll, 1-3/4" wide, and .025" thick. 

     

    This is garage sale priced because it has been discontinued.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS  

  • Tanks Inc. TM37G-T EFI Fuel Tank Kit, 1966-67 Oldsmobile Cutlass
    New
    Tanks Inc. TM37G-T EFI Fuel Tank Kit, 1966-67 Oldsmobile Cutlass
    (Part #91076234)
    x
                

    These all-inlcusive EFI Ready steel fuel tanks from Tanks Inc. take the headache out of converting your classic to modern LS power.  Each kit comes complete with a high-flow (255 liters p/hr) in-tank Walbro pump that supports up to 630 hp.  Also included are a sending unit (Ohms will match the make/model/year application of tank), fill neck, and hose (if applicable).

    • Steel Construction
    • Powder Coated Finish
    • Sold Individually
    • Only offered with a GPA-4 pump
      • Made in the USA
      • Heavy 10 gauge no-warp mounting plate
      • 1/4" NPT Supply and Return Line
      • Barbed Vent Fitting
      • Oven brazed fittings
      • Up to 100 PSI
      • In-tank wire harness 
      • Genuine Walbro Fuel Pumps

    Fits:

    • 1966-1967 Oldsmobile Cutlass, 442
  • Tanks Inc. TM42A-T EFI Fuel Tank Kit, 1970-73 Camaro/Firebird
    New
    Tanks Inc. TM42A-T EFI Fuel Tank Kit, 1970-73 Camaro/Firebird
    (Part #91076241)
    x
                

    These all-inlcusive EFI Ready steel fuel tanks from Tanks Inc take the headache out of converting your classic to modern LS power. Each kit comes complete with a high-flow (255 liters p/hr) in-tank Walbro pump that supports up to 630 hp. Also included are a sending unit (Ohms will match the make/model/year application of tank), fill neck, and hose (if applicable).

    • Steel Construction
    • Sold Individually
    • Powder Coated Finish
    • Only offered with a GPA-4 pump
      • Made in the USA
      • Heavy 10 gauge no-warp mounting plate
      • 1/4" NPT Supply and Return Line
      • Barbed Vent Fitting
      • Oven brazed fittings
      • Up to 100 PSI
      • In-tank wire harness 
      • Genuine Walbro Fuel Pumps

    Fits:

    • 1970-1973 Chevy Camaro and Firebird
Goto Previous PagePrevious Page
1 2 3