Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Muscle Car Air & Fuel Delivery At Speedway Motors

Speedway Motors stocks all the best names in American muscle car carburetors and intake manifolds! Plus, we have a great selection of fuel cells and gas pedals, as well as electric and mechanical fuel pumps. Don't forget to let your engine breath with filters from K&N and R2C. Speedway can fuel your need for speed!

"Muscle Car, Fuel Storage" Page 1 of 4

  • Tanks Inc. TM34H-T EFI Fuel Tank Kit, 1971-72 Buick Skylark
    New
    Tanks Inc. TM34H-T EFI Fuel Tank Kit, 1971-72 Buick Skylark
    SKU-91076222
    x
                

    These all-inlcusive EFI Ready steel fuel tanks from Tanks Inc. take the headache out of converting your classic to modern LS power.  Each kit comes complete with a high-flow (255 liters p/hr) in-tank Walbro pump that supports up to 630 hp.  Also included are a sending unit, fill neck, and hose (if applicable).

    • 20 Gallon Capacity
    • Steel Construction
    • Powder Coated Finish
    • Sold Individually
    • Only offered with a GPA-4 pump

    Fits:

    • 1971-1972 Buick Skylark ,GS, GS 455
  • Aeromotive 18664 Stealth Fuel Cell, 15 Gallon
    Aeromotive 18664 Stealth Fuel Cell, 15 Gallon
    SKU-91018664
    x
                

    Finally, a truly universal system that is built for street rods, drag racing, off-road, autocross, drifting and any other performance application you can think of! This complete unit has all the advantages of an in-tank fuel system; quiet cool operation, ideal fuel pump environments and a serious reduction in installation time and investment. In addition, this system eliminates the risk of fuel pump cavitation due to hard cornering, launching or braking thanks to innovative baffling built into each tank.

    • Includes Stealth 340 LPH in-tank fuel pump
    • Works with both carbureted and EFI systems
    • Return line provisions
    • Two AN8 vents with rollover valves
    • Universal 0-90 Ohm fuel level sender
    • Standard 12-bolt flush mount lid assembly
    • Natural aluminum finish
    • Ready to go simple installation

    Fuel Pump Flow Chart (GIF)

  • 1963-67 Corvette Fuel Tank Strap Set
    $41.99
    $51.99
    1963-67 Corvette Fuel Tank Strap Set
    SKU-9109255
    x
                Replace those missing, rusted, or worn out gas tank  straps with these new OEM replacement straps.  They are sure to keep  that new tank safe, secure, and where it belongs.
    • 1963-67 CORVETTE STRAP KIT
    • Original style tank straps with hardware
    • 30" long
    • Satin coated steel
    • Sold in sets of (2) straps
  • RCI 126 Replacement Flapper Valve, 16 Bolt
    RCI 126 Replacement Flapper Valve, 16 Bolt
    SKU-6007033
    x
                

    This fuel tank cap seal flapper is designed to retrofit all RCI Circle Track cells with the 16 bolt oval type 4" cap assemblies.

    This flapper is designed to slow the fuel leakage in the event of a vehicle roll over.

    A must have safety item! 

    • Replacement nylon flapper valve for all "16 bolt top" RCI fuel cells
    • Compatible with gas or alcohol
    • Overall Length: 4-3/8"
    • Overall Width: 3-3/4"
    • Overall Thickness: .03"
    • Clear plastic material

    Note: Per vendor, this flapper valve should be replaced on a yearly basis.

  • EMPI 17-2761 Billet Aluminum Gas Cap for Stainless Steel Tanks, Each
    EMPI 17-2761 Billet Aluminum Gas Cap for Stainless Steel Tanks, Each
    SKU-1412761
    x
                

    These fuel tank caps are designed for use with EMPI's stainless gas tanks but will work great with nearly any style filler neck.  They feature billet aluminum construction and add a perfect shine to top off your fuel tank.

    • For EMPI stainless steel fuel tanks
    • Rigid edge design for a sure grip
    • Billet aluminum
    • Sold each
  • 1964-67 Chevelle / Malibu Fuel Tank w/ Filler Neck, 20 Gallon
    1964-67 Chevelle / Malibu Fuel Tank w/ Filler Neck, 20 Gallon
    SKU-91072537
    x
                These OEM replacement gas tanks are designed to fit  in stock 1964-67 Chevelle/Malibu, except station wagon. They feature  quality satin coated steel construction with a natural finish.
    • 1964-67 CHEVELLE/MALIBU, EXCEPT STATION WAGON
    • With fill neck
    • High quality OEM replacement tanks
    • Satin coated steel
    • Complete your installation with a new fuel sender and straps
  • EMPI 3897 Pol. Stainless Steel Fuel Tank, 10x30 In., End Fill, 9.5 Gal
    EMPI 3897 Pol. Stainless Steel Fuel Tank, 10x30 In., End Fill, 9.5 Gal
    SKU-1413897
    x
                

    Highly Polished 100% Stainless Steel...Great looks and No Rust...ever!  Stronger with a more durable finish - that won't dull - like polished aluminum.  Available in 5 lengths, 10" diameter and include 2 polished stainless steel straps, stainless steel hardware, and a black plastic gas cap.

    • 10" x 30"
    • End location filler neck
    • 9-1/2 gallon capacity
    • Polished stainless steel
    • Designed for Off-Road use 
    • Cap and straps included

    Note: Gallon measurement is an approximation only.

    Note: When installing a fitting or shut-off valve, caution must be taken not to over-torque and crack or break the fuel outlet. (See alternate photo)

  • EMPI 3896 Pol. Stainless Steel Fuel Tank, 10x24 In., End Fill, 7.5 Gal
    EMPI 3896 Pol. Stainless Steel Fuel Tank, 10x24 In., End Fill, 7.5 Gal
    SKU-1413896
    x
                

    Highly Polished 100% Stainless Steel...Great looks and No Rust...ever!  Stronger with a more durable finish - that won't dull - like polished aluminum.  Available in 5 lengths, 10" diameter and include 2 polished stainless steel straps, stainless steel hardware, and a black plastic gas cap.

    • 10" x 24"
    • End location filler neck
    • 7-1/2 gallon capacity
    • Polished stainless steel
    • Designed for Off-Road use 
    • Cap and straps included

    Note: Gallon measurement is an approximation only.

    Note: When installing a fitting or shut-off valve, caution must be taken not to over-torque and crack or break the fuel outlet. (See alternate photo)

     

  • Tanks Inc. TM34I-T EFI Fuel Tank Kit, 1971-72 Pontiac GTO
    New
    Tanks Inc. TM34I-T EFI Fuel Tank Kit, 1971-72 Pontiac GTO
    SKU-91076223
    x
                

    These all-inlcusive EFI Ready steel fuel tanks from Tanks Inc. take the headache out of converting your classic to modern LS power.  Each kit comes complete with a high-flow (255 liters p/hr) in-tank Walbro pump that supports up to 630 hp.  Also included are a sending unit, fill neck, and hose (if applicable).

    • 20 Gallon Capacity
    • Steel Construction
    • Powder Coated Finish
    • Sold Individually
    • Only offered with a GPA-4 pump

    Fits:

    • 1971-1972 Pontiac GTO, Le Mans

     

  • 1968-70 Dodge / Chrysler Passenger Car Fuel Tank, 18 Gallon
    1968-70 Dodge / Chrysler Passenger Car Fuel Tank, 18 Gallon
    SKU-91072613
    x
                

    These OEM replacement gas tanks are designed to fit in stock 1968-70 Dodge/Chrysler passenger cars. They feature quality satin coated steel construction with a natural finish.

    • 1968-70 VALIANT / 68-69 CUDA
    • High quality OEM replacement tanks 
    • Without vent pipe
    • Satin coated steel
    • Complete your installation with a new fuel sender and straps
  • Stainless Steel Braided Hose, -8 AN
    From: $14.99
    Product Rating: 5.00 Stars
    Stainless Steel Braided Hose, -8 AN
    SKU-620308
    x
                

    This stainless steel braided hose can be used for low pressure applications like fuel, water, air or oil. Works great as a fuel line for gasoline or alcohol fuels.

    Note: This hose is >>NOT<< compatible with ETHANOL blended GAS including E85 ! ! !

    Not to be used for brake or power steering applications. Maximum operating pressure is 750 psi.

    Fitting Thread Application Chart (GIF)

  • Aeromotive 11141 340 Stealth Fuel Pump, Offset Inlet
    Aeromotive 11141 340 Stealth Fuel Pump, Offset Inlet
    SKU-91011141
    x
                

    The Aeromotive 340 Stealth Fuel Pump is a high-output, in-tank, electric fuel pump that fits most popular EFI applications. It is a compact, lightweight pump that bolts into many existing hanger assemblies.

    What sets the 340 Stealth Pump apart is its superior flow throughout a wide pressure range. Compared to other popular aftermarket pumps, at 40 psi the 340 boasts more than 340 lph. That’s over 30% more flow, making it ideal for applications requiring more flow while retaining the factory lines and mounting provisions available in the OE configuration. The 340 is also perfect for use as a universal replacement for applications that require more flow to support forced air power adders such as turbo and supercharged applications.

    • Fits most vehicles where popular aftermarket pumps are applicable
    • Designed for in-tank use only
    • Can be used in carbureted or EFI applications
    • Turbine pump mechanism increases durability and can be used in pulse modulated applications

    910-11141 Instructions (PDF)

  • Tanks Inc. TM41-T EFI Fuel Tank Kit, 1966-67 Chevy II/Nova
    New
    Tanks Inc. TM41-T EFI Fuel Tank Kit, 1966-67 Chevy II/Nova
    SKU-91076240
    x
                

    These all-inlcusive EFI Ready steel fuel tanks from Tanks Inc. take the headache out of converting your classic to modern LS power.  Each kit comes complete with a high-flow (255 liters p/hr) in-tank Walbro pump that supports up to 630 hp.  Also included are a sending unit, fill neck, and hose (if applicable).

    • Steel Construction
    • Powder Coated Finish
    • Sold Individually
    • 16 Gallon Capacity
    • Only offered with a GPA-4 pump

    Fits:

    •  1966-1967 Chevy II, Nova
  • EMPI 17-2760 Replacement Black Plastic Gas Cap, Each
    EMPI 17-2760 Replacement Black Plastic Gas Cap, Each
    SKU-1412760
    x
                

    These replacement fuel tank caps will work great with nearly any style filler neck.  They feature durable plastic construction and resemble OEM specifications.

    • Replacement fuel cap
    • Works with all EMPI fuel tanks and filler necks
    • Black, Plastic
    • Sold each
  • 1963-67 Corvette Fuel Tank, 20-1/2 Gallon, OEM Replacement
    1963-67 Corvette Fuel Tank, 20-1/2 Gallon, OEM Replacement
    SKU-91072492
    x
                These OEM replacement gas tanks are designed to fit  in stock 1963-67 Corvette. They feature quality satin coated steel  construction with a natural finish.
    • 1963-67 CORVETTE
    • High quality OEM replacement tanks
    • Satin coated steel
    • Complete your installation with a new fuel sender and straps
  • 1967-69 Camaro/Firebird Fuel Tank Strap Set
    1967-69 Camaro/Firebird Fuel Tank Strap Set
    SKU-9109256
    x
                

    Replace those missing, rusted, or worn out gas tank straps with these new OEM replacement straps.  They are sure to keep that new tank safe, secure, and where it belongs.

    • OEM replacement
    • Fits 1967-68 Chevy Camaro and Pontiac Firebird
    • 27-5/8" Long
    • Quality steel construction
    • Sold in sets of (2) straps
  • 1967-68 Camaro/Firebird Fuel Tank, 18 Gallon, OEM Replacement
    1967-68 Camaro/Firebird Fuel Tank, 18 Gallon, OEM Replacement
    SKU-91072601
    x
                

    These OEM replacement gas tanks are designed to fit in stock 1967-68 Camaro/Firebirds. They feature quality satin coated steel construction with a natural finish.

    • High quality OEM replacement tanks
    • Satin coated steel
    • Complete your installation with a new fuel sender and straps
  • Tanks Inc. TM34R-T EFI Fuel Tank Kit, 1970-72 Buick/Oldsmobile Cutlass
    New
    Tanks Inc. TM34R-T EFI Fuel Tank Kit, 1970-72 Buick/Oldsmobile Cutlass
    SKU-91076228
    x
                

    These all-inlcusive EFI Ready steel fuel tanks from Tanks Inc. take the headache out of converting your classic to modern LS power.  Each kit comes complete with a high-flow (255 liters p/hr) in-tank Walbro pump that supports up to 630 hp.  Also included are a sending unit, fill neck, and hose (if applicable).

    • Steel Construction
    • Powder Coated Finish
    • 20 Gallon Capacity
    • Sold Individually
    • Only offered with a GPA-4 pump

    Fits:

    • 1970-1972 Oldsmobile Cutlass
    • 1970 Buick Skylark
  • Aeromotive 18665 Stealth Fuel Cell, 20 Gallon
    Aeromotive 18665 Stealth Fuel Cell, 20 Gallon
    SKU-91018665
    x
                

    Finally, a truly universal system that is built for street rods, drag racing, off-road, autocross, drifting and any other performance application you can think of! This complete unit has all the advantages of an in-tank fuel system; quiet cool operation, ideal fuel pump environments and a serious reduction in installation time and investment. In addition, this system eliminates the risk of fuel pump cavitation due to hard cornering, launching or braking thanks to innovative baffling built into each tank.

    • Includes Stealth 340 LPH in-tank fuel pump
    • Works with both carbureted and EFI systems
    • Return line provisions
    • Two AN8 vents with rollover valves
    • Universal 0-90 Ohm fuel level sender
    • Standard 12-bolt flush mount lid assembly
    • Natural aluminum finish
    • Ready to go simple installation

    Fuel Pump Flow Chart (GIF)

  • 1967-68 Ford / Mercury Fuel Tank, 16 Gallon, OEM Replacement
    1967-68 Ford / Mercury Fuel Tank, 16 Gallon, OEM Replacement
    SKU-91072500
    x
                These OEM replacement gas tanks are designed to fit in stock 1964-68 Ford/Mercury passenger cars. They feature quality satin coated steel  construction  with a natural finish.
    • 1964-68 MUSTANG / 67-68 COUGAR, W/DRAIN PLUG
    • High quality OEM replacement tanks 
    • Satin coated steel
    • Complete your installation with a new fuel sender and straps
  • 1957 Chevy Passenger Car Fuel Tank, 16 Gallon, OEM Replacement
    1957 Chevy Passenger Car Fuel Tank, 16 Gallon, OEM Replacement
    SKU-91072400
    x
                These quality replacement fuel tanks are designed to fit 1957 Chevy passenger cars.  They feature square welds with a satin coated steel finish.
    • 1957 CHEVY CAR
    • SQUARE WELD
    • High quality OEM replacement tanks 
    • Satin coated steel
    • O-rings, seals, and screws included
    • Complete your installation with a new fuel sender and straps
  • Fuel Tank Prep Low VOC Acetone, 1 Pint
    $12.99
    $15.99
    Fuel Tank Prep Low VOC Acetone, 1 Pint
    SKU-910125551
    x
                Age, corrosion and storage are the enemies of every gas tank and   fuel pump. This  product is formulated to clean   the inside of  your fuel tank.  This procedure is required as a   preparation step before  re-lining the inside of your tank with fuel tank  liner. It eliminates contaminants and dirt from   the tank. 
    • Fuel tank prep is a low V.O.C. tank prep
    • Prepares tanks for use of tank liner
    • For cars, trucks, motorcycles and small engine fuel tanks
    • Sold in Pint Size, ea.

    Note: Air Shipping is not available for this item

    910125551 Material Safety Data Sheet (PDF)

    910125551 Tank Cleaner and Prep Instructions (PDF)

  • Fragola        Series 6000 P.T.F.E. Lined Hose, -8 AN, 3 FT Roll, Black
    Fragola Series 6000 P.T.F.E. Lined Hose, -8 AN, 3 FT Roll, Black
    SKU-61763028
    x
                Please view the product's page for more information
            
  • Tanks Inc. TM37H-T EFI Fuel Tank Kit, 1965-67 Pontiac GTO
    New
    Tanks Inc. TM37H-T EFI Fuel Tank Kit, 1965-67 Pontiac GTO
    SKU-91076235
    x
                

    These all-inlcusive EFI Ready steel fuel tanks from Tanks Inc. take the headache out of converting your classic to modern LS power.  Each kit comes complete with a high-flow (255 liters p/hr) in-tank Walbro pump that supports up to 630 hp.  Also included are a sending unit, fill neck, and hose (if applicable).

    • Steel Construction
    • Powder Coated Finish
    • Sold Individually
    • Only offered with a GPA-4 pump

    Fits:

    • 1965-1967 Pontiac GTO, Le Mans, Tempest
  • Russell Performance 639220 1/2 Inch Tubing to -8 AN Flare Adapter
    Russell Performance 639220 1/2 Inch Tubing to -8 AN Flare Adapter
    SKU-61763922
    x
                

    Tubing to AN female flare adapters are for use with aluminum tubing only (not steel tubing). 

    • Connects 1/2" aluminum tube to -8 AN female adapters
    • Unique crimp design eliminates tube flaring
    • Not for use with fuel injection

    Learn more about flaring lines and how to select proper automotive fittings by reading our tech article. The Principles of Automotive Fittings.

  • Russell Performance 639200 3/8 Inch Tubing - AN 6 Female Flare Adapter
    Russell Performance 639200 3/8 Inch Tubing - AN 6 Female Flare Adapter
    SKU-61763920
    x
                

    Tubing to AN flare adapters are for use with aluminum tubing only (not steel tubing). 

    • Connects 3/8" aluminum tube to -6 AN adapters
    • Unique crimp design eliminates tube flaring
    • Not for use with fuel injection

    Learn more about flaring lines and how to select proper automotive fittings by reading our tech article. The Principles of Automotive Fittings.

  • Tanks Inc. TM37G-T EFI Fuel Tank Kit, 1966-67 Oldsmobile Cutlass
    New
    Tanks Inc. TM37G-T EFI Fuel Tank Kit, 1966-67 Oldsmobile Cutlass
    SKU-91076234
    x
                

    These all-inlcusive EFI Ready steel fuel tanks from Tanks Inc. take the headache out of converting your classic to modern LS power.  Each kit comes complete with a high-flow (255 liters p/hr) in-tank Walbro pump that supports up to 630 hp.  Also included are a sending unit, fill neck, and hose (if applicable).

    • Steel Construction
    • Powder Coated Finish
    • Sold Individually
    • Only offered with a GPA-4 pump

    Fits:

    • 1966-1967 Oldsmobile Cutlass, 442
  • Tanks Inc. TM42A-T EFI Fuel Tank Kit, 1970-73 Camaro/Firebird
    New
    Tanks Inc. TM42A-T EFI Fuel Tank Kit, 1970-73 Camaro/Firebird
    SKU-91076241
    x
                

    These all-inlcusive EFI Ready steel fuel tanks from Tanks Inc take the headache out of converting your classic to modern LS power. Each kit comes complete with a high-flow (255 liters p/hr) in-tank Walbro pump that supports up to 630 hp. Also included are a sending unit, fill neck and hose (if applicable).

    • Steel Construction
    • Sold Individually
    • Powder Coated Finish
    • Only offered with a GPA-4 pump

    Fits:

    • 1970-1973 Chevy Camaro and Firebird
  • 1964-67 Chevelle/Malibu Fuel Tank Strap Set
    1964-67 Chevelle/Malibu Fuel Tank Strap Set
    SKU-9109248
    x
                

    Replace those missing, rusted, or worn out gas tank straps with these new OEM replacement straps.  They are sure to keep that new tank safe, secure, and where it belongs.

    • 1964-67 CHEVELLE/MALIBU STRAP KIT, EXCEPT STATION WAGON
    • Original style tank straps with hardware
    • 37-3/4" long
    • Satin coated steel
    • Sold in sets of (2) straps
  • Tanks Inc. TM37F-T EFI Fuel Tank Kit, 1964 Pontiac GTO
    New
    Tanks Inc. TM37F-T EFI Fuel Tank Kit, 1964 Pontiac GTO
    SKU-91076233
    x
                

    These all-inlcusive EFI Ready steel fuel tanks from Tanks Inc. take the headache out of converting your classic to modern LS power.  Each kit comes complete with a high-flow (255 liters p/hr) in-tank Walbro pump that supports up to 630 hp.  Also included are a sending unit, fill neck, and hose (if applicable).

    • Steel Construction
    • Powder Coated Finish
    • Sold Individually
    • Only offered with a GPA-4 pump

    Fits:

    • 1964 Pontiac GTO, Le Mans, Tempest
  • AN4 Hose Test Fitting
    $7.99
    AN4 Hose Test Fitting
    SKU-6176640
    x
                

    These hose test fittings simply screw into common AN hose ends and allow you to pressurize with air and submerge in water. Easy to use.

    Fitting Thread Application Chart (GIF)

  • 1968-70 Plymouth Valiant / 1968-69 Cuda Fuel Tank Strap Set
    1968-70 Plymouth Valiant / 1968-69 Cuda Fuel Tank Strap Set
    SKU-9109297
    x
                Replace those missing, rusted, or worn out gas tank  straps with these new OEM replacement straps.  They are sure to keep  that new tank safe, secure, and where it belongs.
    • 1968-70 VALIANT / 68-69 CUDA STRAP KIT
    • Original style tank straps with hardware
    • 35" long
    • Satin coated steel
    • Sold in sets of (2) straps
  • Tanks Inc. TM34B-T EFI Fuel Tank Kit, 1968-69 Chevelle
    New
    Tanks Inc. TM34B-T EFI Fuel Tank Kit, 1968-69 Chevelle
    SKU-91076217
    x
                

    These all-inlcusive EFI Ready steel fuel tanks from Tanks Inc. take the headache out of converting your classic to modern LS power.  Each kit comes complete with a high-flow (255 liters p/hr) in-tank Walbro pump that supports up to 630 hp.  Also included are a sending unit, fill neck, and hose (if applicable).

    • 20 Gallon Capacity
    • Steel Construction
    • Powder Coated Finish
    • Sold Individually
    • Only offered with a GPA-4 pump

    Fits:

    • 1968-1969 Chevelle, Beaumont
    • 1970 Buick Skylark
  • EMPI 3895 Pol Stainless Steel Fuel Tank, 10x16 In., Center Fill, 5 Gal
    EMPI 3895 Pol Stainless Steel Fuel Tank, 10x16 In., Center Fill, 5 Gal
    SKU-1413895
    x
                

    Highly Polished 100% Stainless Steel...Great looks and No Rust...ever!  Stronger with a more durable finish - that won't dull - like polished aluminum.  Available in 5 lengths, 10" diameter and include 2 polished stainless steel straps, stainless steel hardware, and a black plastic gas cap.

    • 10" x 16"
    • Center location filler neck
    • 5 gallon capacity
    • Polished stainless steel
    • Designed for Off-Road use 
    • Cap and straps included

    Note: Gallon measurement is an approximation only.

    Note: When installing a fitting or shut-off valve, caution must be taken not to over-torque and crack or break the fuel outlet. (See alternate photo)

  • Exo-Coat Exterior Fuel Tank Sealant, 1 Pint
    Exo-Coat Exterior Fuel Tank Sealant, 1 Pint
    SKU-910126
    x
                Use this external fuel tank sealer to protect and restore various applications such as fuel tanks, pontoon floats, floating docks, or barges.  It's as easy as brushing it on and letting it air dry.  Great for sealing minor rust and pin holes as well.
    • For use on external rust
    • Urethane coating formulated specifically for adhesion to metal fuel tanks
    • Just brush it on and let it air dry
    • Light rust and pin holes are sealed
    • 1 Pint covers 2 average size fuel tanks

    *Cannot Ship By Air*

    910126 Instructions (PDF)

    Exo-Coat Material Safety Data Sheet (PDF) 

    Tank Sealer FAQ (PDF)

     

  • Tanks Inc. TM34F-T EFI Fuel Tank Kit, 1970 Monte Carlo
    New
    Tanks Inc. TM34F-T EFI Fuel Tank Kit, 1970 Monte Carlo
    SKU-91076221
    x
                

    These all-inlcusive EFI Ready steel fuel tanks from Tanks Inc. take the headache out of converting your classic to modern LS power.  Each kit comes complete with a high-flow (255 liters p/hr) in-tank Walbro pump that supports up to 630 hp.  Also included are a sending unit, fill neck, and hose (if applicable).

    • 20 Gallon Capacity
    • Steel Construction
    • Powder Coated Finish
    • Sold Individually
    • Only offered with a GPA-4 pump

    Fits:

    •  1970 Chevrolet Monte Carlo
  • EMPI 3899 Pol Stainless Steel Fuel Tank, 10x40 In, End Fill, 13.5 Gal
    EMPI 3899 Pol Stainless Steel Fuel Tank, 10x40 In, End Fill, 13.5 Gal
    SKU-1413899
    x
                

    Highly Polished 100% Stainless Steel...Great looks and No Rust...ever!  Stronger with a more durable finish - that won't dull - like polished aluminum.  Available in 5 lengths, 10" diameter and include 2 polished stainless steel straps, stainless steel hardware, and a black plastic gas cap.

    • 10" x 40"
    • End location filler neck
    • 13-1/2 gallon capacity
    • Polished stainless steel
    • Designed for Off-Road use 
    • Cap and straps included

    Note: Gallon measurement is an approximation only.

    Note: When installing a fitting or shut-off valve, caution must be taken not to over-torque and crack or break the fuel outlet. (See alternate photo)

  • Aeromotive 13109 Rising Rate Fuel Pressure Regulator, 40-75 PSI
    Aeromotive 13109 Rising Rate Fuel Pressure Regulator, 40-75 PSI
    SKU-91013109
    x
                

    A stock fuel regulator may be fine for some, but they are not designed for performance or adjustability. The Aeromotive A1000 rising rate fuel pressure regulator allows you to adjust fuel pressure from 40-75 PSI and has a 1:1 boost referencing ratio if needed. EFI fuel pressure regulator has two -6 AN female O-ring inlet ports, and one outlet. There is also a 1/8" NPT port to mount a pressure gauge if desired. 

    • Base pressure adjustable from 40-75 PSI
    • Gasoline and alcohol compatible
    • Fuel pressure rises on a 1:1 ratio with boost
    • 1/8” NPT gauge port
    • Provides (2) ORB-06 inlet ports and (1) ORB-06 return port
    • Bypass fuel pressure regulator

    910-13109 Instructions (PDF)

  • Aluminum Fuel Cap Spanner Key for 617-9040 Kit
    Aluminum Fuel Cap Spanner Key for 617-9040 Kit
    SKU-6179039
    x
                

    Use this special aluminum spanner key for our fuel filler neck (617-9040).  They allow you to access your fuel with the ability to leave with a locked lid.

    • Aluminum replacement spanner key
    • For fuel filler neck/lid (6179040)
    • Access fuel from secured lid
  • Aeromotive 18661 A1000 Fuel Cell, 20 Gallon
    Aeromotive 18661 A1000 Fuel Cell, 20 Gallon
    SKU-91018661
    x
                

    Finally, a truly universal system that is built for street rods, drag racing, off-road, autocross, drifting and any other performance application you can think of! This complete unit has all the advantages of an in-tank fuel system; quiet cool operation, ideal fuel pump environments and a serious reduction in installation time and investment. In addition, this system eliminates the risk of fuel pump cavitation due to hard cornering, launching or braking thanks to innovative baffling built into each tank.

    • Includes an A1000 fuel pump w/ 100 micron stainless fuel filter (filter pre-installed into p/u tube)
    • Supports up to 1700HP
    • Works with both carbureted and EFI systems
    • Return line provisions
    • AN8 valve/vents and return port
    • AN10 pump outlet
    • Universal 0-90 Ohm fuel level sender
    • Standard 12-bolt flush mount lid assembly
    • Natural aluminum finish

    910-18661 Instructions (PDF)

Goto Previous PagePrevious Page
1 2 3 4