Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Muscle Car Air & Fuel Delivery At Speedway Motors

Speedway Motors stocks all the best names in American muscle car carburetors and intake manifolds! Plus, we have a great selection of fuel cells and gas pedals, as well as electric and mechanical fuel pumps. Don't forget to let your engine breath with filters from K&N and R2C. Speedway can fuel your need for speed!

"Muscle Car, Fuel Storage" Page 1 of 13

  • Aluminum Flare Union Adapter Fitting, Black, -10 AN
    Aluminum Flare Union Adapter Fitting, Black, -10 AN
    x
                

    Aluminum 37° flare AN union fitting. Black anodized finish will give your engine compartment the look you are after.

  • Aeroquip FBM4255 Starlite Crimp Fitting, 150 Degree, -12 AN
    Aeroquip FBM4255 Starlite Crimp Fitting, 150 Degree, -12 AN
    x
                

    Aeroquip's incredible Starlite racing hose and fittings are up to 45% lighter than stainless steel braided hose and reusable fittings. Can be used with fuel, lube and coolants. Working temperature is -45° to +300°F and have a 200 psi working pressure.

    Starlite hose can be used with either crimp style or reusable hose fittings. Crimp style fitting must be used only with Starlite hose and installed by qualified personnel using an Aeroquip ProCrimp 1380 crimping machine.

    There are only two ways to order these fittings and hose:

    1. Bring or mail us your old hose to match.
    2. We will send you the fittings and hose you think will work. You cut the hose to length and send it back to us for crimping.

    Fitting Thread Application Chart (GIF)

  • Aeromotive 18664 Stealth Fuel Cell, 15 Gallon
    Aeromotive 18664 Stealth Fuel Cell, 15 Gallon
    x
                

    Finally, a truly universal system that is built for street rods, drag racing, off-road, autocross, drifting and any other performance application you can think of! This complete unit has all the advantages of an in-tank fuel system; quiet cool operation, ideal fuel pump environments and a serious reduction in installation time and investment. In addition, this system eliminates the risk of fuel pump cavitation due to hard cornering, launching or braking thanks to innovative baffling built into each tank.

    • Includes Stealth 340 LPH in-tank fuel pump
    • Works with both carbureted and EFI systems
    • Return line provisions
    • Two AN8 vents with rollover valves
    • Universal 0-90 Ohm fuel level sender
    • Standard 12-bolt flush mount lid assembly
    • Natural aluminum finish
    • Ready to go simple installation

    Fuel Pump Flow Chart (GIF)

  • Blue Push-On Hose, -6 AN
    From: $9.99
    Product Rating: 5.00 Stars
    Blue Push-On Hose, -6 AN
    x
                
    • Blue push-on hose available in AN6, 8, 10 and 12 sizes
    • Working temperature of -40 to +200 deg
    • 150 psi max pressure
    • Ideal for fuel line applications only
    • Not suited for oil or water applications exceeding temperatures of 200 degrees
    • Use with Speedway brand push-on fittings
    • When using at temp and pressures at the high end fo the parameter, hose clamps should be utilized.

    Hose Fitting Sizing Chart (GIF)

  • Speedway 90 -12 AN Flare to 1/2 Inch NPT Pipe Adapter Fitting
    Speedway 90 -12 AN Flare to 1/2 Inch NPT Pipe Adapter Fitting
    x
                

    Many street rodders find that red or blue anodized aluminum AN hose fittings look too racy on their cars, but standard steel versions are just too plain. Speedway offers a great looking alternative with these nickel plated aluminum hose fittings and adapters. Lighter and more affordable than stainless steel, these electoless nickel plated aluminum pieces combine great corrosion resistance with a neutral color and classy appearance.

    Aluminum pipe thread to 37° AN adapter fitting with a 90° bend.

    Fitting Thread Application Chart (GIF)

  • Black Straight -12 AN Flare to 1/2 Inch NPT Pipe Adapter Fitting
    Black Straight -12 AN Flare to 1/2 Inch NPT Pipe Adapter Fitting
    x
                

    These straight flare adaptors connect 1/2" pipe to straight -12 AN fittings. They are lightweight aluminum and feature a 37° sealing angle.  Black finish will give your engine compartment the look you are after.  Order your desired size.

    • Precision machined to ensure precise thread engagement
    • Lightweight aluminum fitting
    • -12 AN to 1/2" aluminum pipe
    • 37° sealing angle guarantees a positive seal at maximum operating pressures
    • Available in Black anodized finish for a custom look

    Fitting Thread Application Chart (GIF)

  • Aluminum Flare Union Adapter Fitting, Blue, -12 AN
    Aluminum Flare Union Adapter Fitting, Blue, -12 AN
    x
                

    Aluminum 37° flare AN union fitting. Blue anodized finish.

    Fitting Thread Application Chart (GIF)

  • Aluminum Tee Flare Adapter Fitting, Black, -12 AN
    Aluminum Tee Flare Adapter Fitting, Black, -12 AN
    x
                

    Aluminum tee adapter for 37° AN flared fittings. Black anodized finish will give your engine compartment the look you are after.

    Fitting Thread Application Chart (GIF)

  • Socketless Reusable Push-On Hose End for -8 AN Fitting, 45 Degree
    Socketless Reusable Push-On Hose End for -8 AN Fitting, 45 Degree
    x
                

    45° push-on style steel hose ends for use with AN fittings. Special construction assures a tight, leak-proof connection with maximum operating pressures up to 350 psi. Covers a wide variety of automotive fluid conveying applications, including air, water, gasoline, and fuel and lubricating oils. 

    Socketless Push-On Application Chart (GIF)

    Socketless Push-On Assembly (GIF)

  • Aeroquip FCE1524 Nickel 45 Deg Push-On Hose Socketless Fitting, -10 AN
    Aeroquip FCE1524 Nickel 45 Deg Push-On Hose Socketless Fitting, -10 AN
    x
                

    Many street rodders find that red or blue anodized aluminum AN hose fittings look too racy on their cars, but standard steel versions are just too plain.

    Speedway offers a great looking alternative with these nickel plated aluminum hose fittings and adapters from Aeroquip. Lighter and more affordable than stainless steel, these electoless nickel plated pieces combine great corrosion resistance with a neutral color and classy appearance.

    Socketless Fitting Application Chart (GIF)

  • Aeroquip FBM4043 Hose End Coupler Fitting, 120 Degree, Blue/Red, -8 AN
    Aeroquip FBM4043 Hose End Coupler Fitting, 120 Degree, Blue/Red, -8 AN
    x
                

    Aeroquip reusable hose ends are easier to install than cutter-style fittings and are more user-friendly.  With their compression-style design, they can be reused without damaging the fitting, and the nipple pilot prevents damage to the inner tube.  Their one-piece design allows for improved flow and eliminates two potential leak points (brazed joints).  They're available in red/blue anodized finishes.

    • 120 Degree 
    • Aluminum
    • Hose End Size: -8 AN
    • Fitting Style: Reusable non-swivel
    • Adapter Size: -8 AN
    • Adapter Attachment: Female threads
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • Unique taper design ensures easy assembly
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Accepts a variety of lightweight aluminum AN style adapters & fittings
    • Available in Blue/Red corrosion resistant finish

    Fitting Thread Application Chart (GIF)

  • Aluminum -12 AN Female to -8 AN Male Reducer Fitting
    Aluminum -12 AN Female to -8 AN Male Reducer Fitting
    x
                

    Aluminum female to male adapter for 37° AN fittings. Blue anodized finish.

    Fitting Thread Application Chart (GIF)

  • Aluminum Straight Thread Fitting Plug, Black, -8 AN
    Aluminum Straight Thread Fitting Plug, Black, -8 AN
    x
                

    Aluminum male straight thread plug with O-ring seal for AN fitting. Black anodized finish.

    Fitting Thread Application Chart (GIF)

  • Black 45 Degree -8 AN Flare to 3/8 Inch NPT Pipe Adapter Fitting
    Black 45 Degree -8 AN Flare to 3/8 Inch NPT Pipe Adapter Fitting
    x
                

    Aluminum pipe thread to 37° AN flare adapter fitting with a 45° bend. Black anodized finish will give your engine compartment the look you are after.

    Fitting Thread Application Chart (GIF)

  • Aeroquip FBM4062 Hose End Coupler Fitting, 180 Degree, Blue/Red, -6 AN
    Aeroquip FBM4062 Hose End Coupler Fitting, 180 Degree, Blue/Red, -6 AN
    x
                

    Aeroquip reusable hose ends are easier to install than cutter-style fittings and are more user-friendly.  With their compression-style design, they can be reused without damaging the fitting, and the nipple pilot prevents damage to the inner tube.  Their one-piece design allows for improved flow and eliminates two potential leak points (brazed joints).  They're available in red/blue anodized finishes.

    • 180 Degree 
    • Aluminum
    • Hose End Size: -6 AN
    • Fitting Style: Reusable non-swivel
    • Adapter Size: -6 AN
    • Adapter Attachment: Female threads
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • Unique taper design ensures easy assembly
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Accepts a variety of lightweight aluminum AN style adapters & fittings
    • Available in a Red/Blue corrosion resistant finish

    Fitting Thread Application Chart (GIF)

  • Aeroquip Straight Full Flow Swivel Hose End Coupler Fitting, -4 AN
    Aeroquip Straight Full Flow Swivel Hose End Coupler Fitting, -4 AN
    x
                

    This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings. Available in swivel with a red and silver anodized finish. For use with Aeroquip AQP® Stainless Steel Racing Hose and Aeroquip StartLite® light-weight hose (part number 617304).

    • -4 AN female to push-on adapter
    • Straight style fuel line hose connector/coupler
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • Unique taper design ensures easy assembly
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Accepts a variety of lightweight aluminum AN style adapters & fittings
    • Available in Red/Silver corrosion resistant finish

    Straight full flow ends come in sizes of AN4, AN6, AN8, AN10, AN12, and AN16.

    Fitting Thread Application Chart (GIF)

  • Aluminum Flare Fitting Plug, Blue, -8 AN
    Aluminum Flare Fitting Plug, Blue, -8 AN
    x
                

    Aluminum flare plugs. 37° AN.

    Fitting Thread Application Chart (GIF)

  • Aeroquip FCE4035 Nickel Plated -12 AN Hose End Fitting, 90 Degree
    Aeroquip FCE4035 Nickel Plated -12 AN Hose End Fitting, 90 Degree
    x
                

    Many street rodders find that red or blue anodized aluminum AN hose fittings look too racy on their cars, but standard steel versions are just too plain.

    Speedway offers a great looking alternative with these nickel plated aluminum hose fittings and adapters from Aeroquip. Lighter and more affordable than stainless steel, these electoless nickel plated pieces combine great corrosion resistance with a neutral color and classy appearance.

    These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings. Available in swivel with a nickel-plated finish. For use with Aeroquip AQP® Stainless Steel Racing Hose and Aeroquip StartLite® light-weight hose (part number 617312).

    • -12 AN Aluminum
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Available in a Nickel corrosion resistant finish

    Fitting Thread Application Chart (GIF)

  • Aluminum Tee Bulkhead Fitting, -4 AN
    Aluminum Tee Bulkhead Fitting, -4 AN
    x
                

    Aluminum tee bulkhead for 37° flare AN fittings.

    AN Thread Sizing Guide (GIF)

    Fitting Thread Application Chart (GIF)

  • Aeroquip FBM4242 Starlite Crimp Fitting, 120 Degree, -6 AN
    Aeroquip FBM4242 Starlite Crimp Fitting, 120 Degree, -6 AN
    x
                

    Aeroquip's incredible Starlite racing hose and fittings are up to 45% lighter than stainless steel braided hose and reusable fittings. Can be used with fuel, lube and coolants. Working temperature is -45° to +300°F and have a 200 psi working pressure.

    Starlite hose can be used with either crimp style or reusable hose fittings. Crimp style fitting must be used only with Starlite hose and installed by qualified personnel using an Aeroquip ProCrimp 1380 crimping machine.

    There are only two ways to order these fittings and hose:

    1. Bring or mail us your old hose to match.
    2. We will send you the fittings and hose you think will work. You cut the hose to length and send it back to us for crimping.

    Fitting Thread Application Chart (GIF)

  • 1963-67 Corvette Fuel Tank Strap Set
    $41.99
    $51.99
    1963-67 Corvette Fuel Tank Strap Set
    x
                Replace those missing, rusted, or worn out gas tank  straps with these new OEM replacement straps.  They are sure to keep  that new tank safe, secure, and where it belongs.
    • 1963-67 CORVETTE STRAP KIT
    • Original style tank straps with hardware
    • 30" long
    • Satin coated steel
    • Sold in sets of (2) straps
  • Black 45 Degree -12 AN Flare to 3/4 Inch NPT Pipe Adapter Fitting
    Black 45 Degree -12 AN Flare to 3/4 Inch NPT Pipe Adapter Fitting
    x
                

    Aluminum pipe thread to 37° AN flare adapter fitting with a 45° bend. Black anodized finish will give your engine compartment the look you are after.

    Fitting Thread Application Chart (GIF)

  • Aeroquip FBM4463 Black Hose End Coupler Fitting 180 Degree Angle -8 AN
    Aeroquip FBM4463 Black Hose End Coupler Fitting 180 Degree Angle -8 AN
    x
                

    Aeroquip reusable hose ends are easier to install than cutter-style fittings and are more user-friendly.  With their compression-style design, they can be reused without damaging the fitting, and the nipple pilot prevents damage to the inner tube.  Their one-piece design allows for improved flow and eliminates two potential leak points (brazed joints).  They're available in black anodized finish.

    • 180 Degree 
    • Aluminum
    • Hose End Size: -8 AN
    • Fitting Style: Reusable non-swivel
    • Adapter Size: -8 AN
    • Adapter Attachment: Female threads
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • Unique taper design ensures easy assembly
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Accepts a variety of lightweight aluminum AN style adapters & fittings
    • Available in a Black corrosion resistant finish

    Fitting Thread Application Chart (GIF)

  • RCI 126 Replacement Flapper Valve, 16 Bolt
    RCI 126 Replacement Flapper Valve, 16 Bolt
    x
                

    This fuel tank cap seal flapper is designed to retrofit all RCI Circle Track cells with the 16 bolt oval type 4" cap assemblies.

    This flapper is designed to slow the fuel leakage in the event of a vehicle roll over.

    A must have safety item! 

    • Replacement nylon flapper valve for all "16 bolt top" RCI fuel cells
    • Compatible with gas or alcohol
    • Overall Length: 4-3/8"
    • Overall Width: 3-3/4"
    • Overall Thickness: .03"
    • Clear plastic material

    Note: Per vendor, this flapper valve should be replaced on a yearly basis.

  • Aeroquip FBM4045 120   Hose End Coupler Fitting, Blue/Red, -12 AN
    Aeroquip FBM4045 120 Hose End Coupler Fitting, Blue/Red, -12 AN
    x
                

    Aeroquip reusable hose ends are easier to install than cutter-style fittings and are more user-friendly.  With their compression-style design, they can be reused without damaging the fitting, and the nipple pilot prevents damage to the inner tube.  Their one-piece design allows for improved flow and eliminates two potential leak points (brazed joints).  They're available in red/blue anodized finishes.

    • 120 Degree 
    • Aluminum
    • Hose End Size: -12 AN
    • Fitting Style: Reusable non-swivel
    • Adapter Size: -12 AN
    • Adapter Attachment: Female threads
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • Unique taper design ensures easy assembly
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Accepts a variety of lightweight aluminum AN style adapters & fittings
    • Available in Blue/Red corrosion resistant finish

    Fitting Thread Application Chart (GIF)

  • Female Aluminum Swivel Coupler, -3 AN
    Female Aluminum Swivel Coupler, -3 AN
    x
                

    Female aluminum swivel coupler for 37° AN fittings.

    Fitting Thread Application Chart (GIF)

  • EMPI 17-2761 Billet Aluminum Gas Cap for Stainless Steel Tanks, Each
    EMPI 17-2761 Billet Aluminum Gas Cap for Stainless Steel Tanks, Each
    x
                

    These fuel tank caps are designed for use with EMPI's stainless gas tanks but will work great with nearly any style filler neck.  They feature billet aluminum construction and add a perfect shine to top off your fuel tank.

    • For EMPI stainless steel fuel tanks
    • Rigid edge design for a sure grip
    • Billet aluminum
    • Sold each
  • Aeroquip FCE1533 Nickel 90 Degree Push-On Socketless Fitting, -8 AN
    Aeroquip FCE1533 Nickel 90 Degree Push-On Socketless Fitting, -8 AN
    x
                

    Many street rodders find that red or blue anodized aluminum AN hose fittings look too racy on their cars, but standard steel versions are just too plain.

    Speedway offers a great looking alternative with these nickel plated aluminum hose fittings and adapters from Aeroquip. Lighter and more affordable than stainless steel, these electoless nickel plated pieces combine great corrosion resistance with a neutral color and classy appearance.

    Socketless Fitting Application Chart (GIF)

  • Black 45 Degree -10 AN Flare to 1/2 Inch NPT Pipe Adapter Fitting
    Black 45 Degree -10 AN Flare to 1/2 Inch NPT Pipe Adapter Fitting
    x
                

    Aluminum pipe thread to 37° AN flare adapter fitting with a 45° bend. Black anodized finish will give your engine compartment the look you are after.

    Fitting Thread Application Chart (GIF)

  • Fragola 684506-BL Real-Street 45 Degree PTFE Hose End Fitting, -6 AN, Black
    Fragola 684506-BL Real-Street 45 Degree PTFE Hose End Fitting, -6 AN, Black
    x
                

    Fragola's Real-Street reusable hose ends for P.T.F.E. hose offer a bright dip anodized black finish and eliminate the permeation issues common with aftermarket racing hose.  A unique "double-swivel" design allows for clocking adjustment during installation.

    • 45° hose end
    • -6 AN
    • Black anodized finish
    • Double-swivel design
    • Reusable
    • For P.T.F.E. hose
  • Aluminum Flare Fitting Cap, Black, -8 AN
    Aluminum Flare Fitting Cap, Black, -8 AN
    x
                

    Aluminum caps to seal 37° flare AN male fittings. Black anodized finish.

    Fitting Thread Application Chart (GIF)

  • Aeroquip FBM4234 Starlite Crimp Fitting, 90 Degree, -10 AN
    Aeroquip FBM4234 Starlite Crimp Fitting, 90 Degree, -10 AN
    x
                

    Aeroquip's incredible Starlite racing hose and fittings are up to 45% lighter than stainless steel braided hose and reusable fittings. Can be used with fuel, lube and coolants. Working temperature is -45° to +300°F and have a 200 psi working pressure.

    Starlite hose can be used with either crimp style or reusable hose fittings. Crimp style fitting must be used only with Starlite hose and installed by qualified personnel using an Aeroquip ProCrimp 1380 crimping machine.

    There are only two ways to order these fittings and hose:

    1. Bring or mail us your old hose to match.
    2. We will send you the fittings and hose you think will work. You cut the hose to length and send it back to us for crimping.

    Fitting Thread Application Chart (GIF)

  • 1964-67 Chevelle / Malibu Fuel Tank w/ Filler Neck, 20 Gallon
    1964-67 Chevelle / Malibu Fuel Tank w/ Filler Neck, 20 Gallon
    x
                These OEM replacement gas tanks are designed to fit  in stock 1964-67 Chevelle/Malibu, except station wagon. They feature  quality satin coated steel construction with a natural finish.
    • 1964-67 CHEVELLE/MALIBU, EXCEPT STATION WAGON
    • With fill neck
    • High quality OEM replacement tanks
    • Satin coated steel
    • Complete your installation with a new fuel sender and straps
  • EMPI 3897 Polished Stainless Steel Fuel Tank, 10 x 30 Inch, End Fill, 9.5 Gallon
    EMPI 3897 Polished Stainless Steel Fuel Tank, 10 x 30 Inch, End Fill, 9.5 Gallon
    x
                

    Highly Polished 100% Stainless Steel...Great looks and No Rust...ever!  Stronger with a more durable finish - that won't dull - like polished aluminum.  Available in 5 lengths, 10" diameter and include 2 polished stainless steel straps, stainless steel hardware, and a black plastic gas cap.

    • 10" x 30"
    • End location filler neck
    • 9-1/2 gallon capacity
    • Polished stainless steel
    • Designed for Off-Road use 
    • Cap and straps included

    Note: Gallon measurement is an approximation only.

    Note: When installing a fitting or shut-off valve, caution must be taken not to over-torque and crack or break the fuel outlet. (See alternate photo)

  • Aeroquip FCE4032 Nickel 90 Degree Hose End Coupler Fitting, -6 AN
    Aeroquip FCE4032 Nickel 90 Degree Hose End Coupler Fitting, -6 AN
    x
                

    Many street rodders find that red or blue anodized aluminum AN hose fittings look too racy on their cars, but standard steel versions are just too plain.

    Speedway offers a great looking alternative with these nickel plated aluminum hose fittings and adapters from Aeroquip. Lighter and more affordable than stainless steel, these electoless nickel plated pieces combine great corrosion resistance with a neutral color and classy appearance.

    These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings. Available in swivel with a nickel-plated finish. For use with Aeroquip AQP® Stainless Steel Racing Hose and Aeroquip StartLite® light-weight hose (part number 617306).

    • -6 AN Aluminum
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Available in a Nickel corrosion resistant finish

    Fitting Thread Application Chart (GIF)

  • Aeroquip Straight Full Flow Swivel Hose End Coupler Fitting, -16 AN
    Aeroquip Straight Full Flow Swivel Hose End Coupler Fitting, -16 AN
    x
                

    This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings. Available in swivel with a red and blue anodized finish. For use with Aeroquip AQP® Stainless Steel Racing Hose and Aeroquip StartLite® light-weight hose (part number 617316).

    • -16 AN 
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • Unique taper design ensures easy assembly
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Accepts a variety of lightweight aluminum AN style adapters & fittings
    • Available in Red/Blue corrosion resistant finish

    Straight full flow ends come in sizes of AN4, AN6, AN8, AN10, AN12, and AN16.

    Fitting Thread Application Chart (GIF)

Goto Previous PagePrevious Page
1 2 3 4 5 ... 13