Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Muscle Car Fittings & Hose At Speedway Motors

Speedway Motors has the absolute best selection of muscle car automotive hose, fittings and plumbing components! Choose from hundreds of different AN fittings, NPT fittings, tube clamps, and push-on fittings available in multiple finishes to give your American muscle car that custom look you want. Insist on quality braided high pressure hose and hose ends.

Featured Products
90 Degree Socketless Push-On Hose End, -6 AN
90 Degree Socketless Push-On Hose End, -6 AN
x
            

90° socketless push-on hose ends for 37° fittings.

Socketless Push-On Hose Ends Application Chart (GIF)

90 Degree Socketless Push-On Hose End Fitting, -8 AN
90 Degree Socketless Push-On Hose End Fitting, -8 AN
x
            

90° socketless push-on hose ends for 37° fittings.

  • -8 AN female to push-on hose barb adapter
  • 90° fuel line hose connector
  • Lightweight aluminum hose ends are completely reusable, and interchangeable
  • 37° angled sealing surface guarantees a positive anti-leak seal
  • Available in a Red/Blue corrosion resistant finish

Socketless Push-On Hose Ends Application Chart (GIF)

Insulated Brake Line Tube Clamps, Bag/10
Insulated Brake Line Tube Clamps, Bag/10
x
            

You will need these rubber coated fuel line tube clamps and brake line clamps to finish your plumbing job. These tube clamps are made from zinc plated steel, are easy to work with, durable, and corrosion resistant. Choose from a full range of sizes.

10 clamps per package.

Aluminum Socketless Reusable Push-On Hose Barb Ends for AN Fittings
Aluminum Socketless Reusable Push-On Hose Barb Ends for AN Fittings
x
            

These lightweight socketless fittings are machined from aluminum alloy and anodized red and blue with a luster finish, the ultimate in professional appearance. Precision machine work ensures a positive seal when coupling Full Flow™ hose ends to your carburetor. They are ideal for use as fuel line connectors or adapters.

  • AN to hose barb 
  • Choose straight, 45°, 90°, 120° or 180°. Then choose -6, -8, -10 or -12 AN size.
  • Use with Aeroquip Special Application blue hose
  • For use with 37° AN style fittings

Socketless Fitting Application Chart (GIF)

AN Thread Size Guide (GIF)

Fitting Thread Size Guide (GIF)

"Muscle Car, Fittings and Hose" Page 1 of 7

  • Inverted Flare Thread Nuts for 3/16 Inch Tubing, 3/8-24
    Inverted Flare Thread Nuts for 3/16 Inch Tubing, 3/8-24
    x
                

    Steel 3/8"-24 IFM thread nuts for 3/16" brake line when double flared to 45°.

  • AN Fitting Plug, -8 AN
    $4.99
    AN Fitting Plug, -8 AN
    x
                These AN fitting plugs have always been hard-to-find items. Plugs are used when sealing spare race engines against dirt and water during transportation and storage. Each plug is reusable. Use on oil, fuel, or coolant lines. Four plugs per package.
            
  • Black 45 Degree Socketless Push-On Hose End, -8 AN
    Black 45 Degree Socketless Push-On Hose End, -8 AN
    x
                

    Black socketless push-on hose end fittings will give your engine compartment the look you are after. 45 degree fittings in multiple sizes.  For use with 37 degree flared ends.

  • Speedway Full Flow Swivel Hose End Fitting, 45 Degree, Red/Blue -12 AN
    Speedway Full Flow Swivel Hose End Fitting, 45 Degree, Red/Blue -12 AN
    x
                

    This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings.

    They are manufactured from the highest quality aluminum and are then red and blue anodized to give them a new high performance look. These full flow hose ends use a swivel head design, allowing the fitting to rotate as you are tightening or assembling the hose. These fittings come in a 45 degree angle and are available in a variety of sizes to fit your specific hose diameter. Upgrade your fittings to these full flow hose ends and see the difference.

    • -12 AN
    • 45 degree angle
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Available in a Red/Blue corrosion resistant finish

    Full Swivel Application Chart (GIF)

  • Quick Tight Hose Clamp, 3/4 - 1 Inch
    Quick Tight Hose Clamp, 3/4 - 1 Inch
    x
                Stainless steel quick-tight tube clamps eliminate the need for a screwdriver. Has hole for safety wire tie. Clamps over .75" to 1.00" O.D. hose.
            
  • AN16 Fitting Caps, 4/pk
    $5.99
    AN16 Fitting Caps, 4/pk
    x
                These AN fitting caps have always been hard-to-find items. Caps are used when sealing spare race engines against dirt and water during transportation and storage. 

    Each cap is reusable. Use on oil, fuel, or coolant lines. Four caps per package.

  • Speedway Full Flow Swivel Hose End Fitting, Straight, Anodized, -8 AN
    Speedway Full Flow Swivel Hose End Fitting, Straight, Anodized, -8 AN
    x
                

    This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings.

    They are manufactured from the highest quality aluminum and are then black anodized to give them a new sleek look. These full flow hose ends use a swivel head design, allowing the fitting to rotate as you are tightening or assembling the hose. These fittings come in a straight design and are available in a variety of sizes to fit your specific hose diameter. Upgrade your fittings to these full flow hose ends and see the difference.

    • -8 AN female to push-on adapter
    • Straight style fuel line hose connector/coupler
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Available in a Black corrosion resistant finish

    Full Swivel Application Chart (GIF)

  • Threaded Aluminum Weld Bung Fitting, 1/8 Inch NPT Female
    Threaded Aluminum Weld Bung Fitting, 1/8 Inch NPT Female
    x
                

    We offer these premium-quality weld-in bungs for a variety of uses. They're CNC-machined from solid aluminum and are great for oil or fuel tanks, radiators, valve covers, manifolds, and rear axle housings.

    Aluminum female pipe thread weld bung fitting.

    Threaded Aluminum Weld Bung Fitting

    • 1/8 Inch NPT

    Fitting Thread Application Chart (GIF)

     

  • Goodridge AN921-08D 90 Deg High-Flow O-Ring -8 AN Hose to Port Fitting
    Goodridge AN921-08D 90 Deg High-Flow O-Ring -8 AN Hose to Port Fitting
    x
                

    Goodridge high-flow 90° bend O-ring port adapter fitting for 37° AN flare. Blue anodized finish.

    Fitting Thread Application Chart (GIF)

  • Speedway Full Flow Swivel Hose End Fitting, 90 Degree, Black, -10 AN
    Speedway Full Flow Swivel Hose End Fitting, 90 Degree, Black, -10 AN
    x
                

    This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings.

    They are manufactured from the highest quality aluminum and are then black anodized to give them a new sleek look. These full flow hose ends use a swivel head design, allowing the fitting to rotate as you are tightening or assembling the hose. These fittings come in a 90 degree angle and are available in a variety of sizes to fit your specific hose diameter. Upgrade your fittings to these full flow hose ends and see the difference.

    • -10 AN
    • 90 degree angle
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Available in a Black corrosion resistant finish

    Full Swivel Application Chart (GIF)

  • AN8 Fitting Caps, 4/pk
    $4.99
    Product Rating: 5.00 Stars
    AN8 Fitting Caps, 4/pk
    x
                These AN fitting caps have always been hard-to-find items. Caps are used when sealing spare race engines against dirt and water during transportation and storage. 

    Each cap is reusable. Use on oil, fuel, or coolant lines. Four caps per package.

  • AN Fitting Plug, -6 AN
    $4.99
    AN Fitting Plug, -6 AN
    x
                These AN fitting plugs have always been hard-to-find items. Plugs are used when sealing spare race engines against dirt and water during transportation and storage. Each plug is reusable. Use on oil, fuel, or coolant lines. Four plugs per package.
            
  • Speedway Replacement Nitrile O-Rings for -4 AN Fittings, Pack/10
    Speedway Replacement Nitrile O-Rings for -4 AN Fittings, Pack/10
    x
                

    Speedway replacment "Nitrile 1" AN fitting O-rings are designed for standard fuel or oil applications.

    Bag of 10 O-rings.

    Fitting Thread Application Chart (GIF)

  • AN Fitting Plug, -4 AN
    $4.99
    AN Fitting Plug, -4 AN
    x
                These AN fitting plugs have always been hard-to-find items. Plugs are used when sealing spare race engines against dirt and water during transportation and storage. Each plug is reusable. Use on oil, fuel, or coolant lines. Four plugs per package.
            
  • Quick Tight Hose Clamp, 1-5/8 - 2-1/8 Inch
    Quick Tight Hose Clamp, 1-5/8 - 2-1/8 Inch
    x
                Stainless steel quick-tight tube clamps eliminate the need for a screwdriver. Has hole for safety wire tie. Clamps over 1.625" to 2.125" O.D. hose.
            
  • Blue Straight AN10 Flare Adapter to 3/4 Inch Aluminum Pipe Fitting
    Blue Straight AN10 Flare Adapter to 3/4 Inch Aluminum Pipe Fitting
    x
                

    These straight flare adaptors connect 3/4" pipe to straight -10 AN fittings. They are lightweight aluminum and feature a 37° sealing angle.  Order your desired size.

    • Precision machined to ensure precise thread engagement
    • Lightweight aluminum fitting
    • -10 AN to 3/4" aluminum pipe
    • 37° sealing angle guarantees a positive seal at maximum operating pressures
    • Available in Blue anodized finish for a custom look

    Fitting Thread Application Chart (GIF)

  • Gates 32915 Power Grip Hose Clamp, 1/2 Inch - 11/16 Inch OD
    Gates 32915 Power Grip Hose Clamp, 1/2 Inch - 11/16 Inch OD
    x
                

    These heatshrink tube clamps replace your ugly old hose clamps and give a much cleaner look. Conforms to any shape of hose or housing, even out of round fittings. They are easy to install with only a heat gun. Made from a heat-sensitive thermoplastic with a memory to prevent over/under-tightening. Unique indicator tells you when clamp has shrunk to seal.

    Temperature rating: -40° F to 302° F (-40° C to 150° C) 

    Gates Power Grip Hose Clamp, 1/2" - 11/16" OD

    Instruction Sheet (PDF)

  • Aluminum Black Tube Nut Sleeve, -10 AN, 5/8 Inch
    Aluminum Black Tube Nut Sleeve, -10 AN, 5/8 Inch
    x
                
    These tube nut sleeves, when used in conjunction with our tube nuts, allow you to attach hard lines to AN fittings. You need to flare the tube to 37° to match the AN fitting. Not for use with 45° flared lines.

    Fitting Thread Application Chart (GIF)

  • AFCO 40245 3/8 IFF to 1/8 NPT Female Adapter
    AFCO 40245 3/8 IFF to 1/8 NPT Female Adapter
    x
                Catalog Correction: This is a 1/8” female, not male, 3/8" IFF (inverted flare female) to 1/8" NPT brass adapter fitting.
            
  • 90 Degree Flare Adaptor, AN8 to 1/2 Inch NPT
    90 Degree Flare Adaptor, AN8 to 1/2 Inch NPT
    x
                

    Pipe to 90° flare adaptor. 37° AN. 

    Fitting Thread Application Chart (GIF)

  • AFCO 80128X10 Aluminum Weld-On Female Fitting, 3/8 Inch NPT Thread
    AFCO 80128X10 Aluminum Weld-On Female Fitting, 3/8 Inch NPT Thread
    x
                

    AFCO weld-on aluminum female fitting.

    • 3/8" NPT thread
  • Socketless Reusable Push-On Hose End for -4 AN Fitting, 90 Degree
    Socketless Reusable Push-On Hose End for -4 AN Fitting, 90 Degree
    x
                

    Push-on style with 90° steel hose ends for use with AN fittings. Special construction assures a tight, leak-proof connection with maximum operating pressures up to 350 psi. Covers a wide variety of automotive fluid conveying applications, including air, water, gasoline, and fuel and lubricating oils.

    Socketless Push-On Application Chart (GIF)

    Socketless Push-On Assembly (GIF)

    Fitting Thread Size Guide (GIF)

    NPT Thread Size Chart (GIF)

  • Aeroquip FBM4435 Black Hose End Coupler Fitting 90 Degree Angle -12 AN
    Aeroquip FBM4435 Black Hose End Coupler Fitting 90 Degree Angle -12 AN
    x
                

    This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings. Available in swivel with a black anodized finish. For use with Aeroquip AQP® Stainless Steel Racing Hose and Aeroquip StartLite® light-weight hose (part number 617312).

    • -12 AN 
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • Unique taper design ensures easy assembly
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Accepts a variety of lightweight aluminum AN style adapters & fittings
    • Available in a Black corrosion resistant finish

    90° Full Flow Ends come in sizes of AN6, AN8, AN10 and AN12.

    Fitting Thread Application Chart (GIF)

  • Gates 32954 Power Grip Hose Clamp, 2 Inch - 2 1/4 Inch OD
    Gates 32954 Power Grip Hose Clamp, 2 Inch - 2 1/4 Inch OD
    x
                

    These heatshrink tube clamps replace your ugly old hose clamps and give a much cleaner look. Conforms to any shape of hose or housing, even out of round fittings. They are easy to install with only a heat gun. Made from a heat-sensitive thermoplastic with a memory to prevent over/under-tightening. Unique indicator tells you when clamp has shrunk to seal.

    Temperature rating: -40° F to 302° F (-40° C to 150° C)

    Instruction Sheet (PDF) 

  • Speedway Replacement EPR2 O-Rings for -3 AN Fittings, Pack/5
    Speedway Replacement EPR2 O-Rings for -3 AN Fittings, Pack/5
    x
                

    Speedway replacement "EPR2" AN fitting O-rings are for use with alcohol or nitro fuels.

    Bag of 5 O-rings.

    Fitting Thread Application Chart (GIF)

  • Speedway Replacement EPR2 O-Rings for -12 AN Fittings, Pack/5
    Speedway Replacement EPR2 O-Rings for -12 AN Fittings, Pack/5
    x
                

    Speedway replacment "EPR2" AN fitting O-rings are for use with alcohol or nitro fuels.

    Bag of 5 O-rings.

    Fitting Thread Application Chart (GIF)

  • Straight Socketless Reuseable Push-On Hose End for -10 AN Fitting
    Straight Socketless Reuseable Push-On Hose End for -10 AN Fitting
    x
                

    Push-on straight brass hose ends for use with AN fittings. Special construction assures a tight, leak-proof connection with maximum operating pressures up to 350 psi. Covers a wide variety of automotive fluid conveying applications, including air, water, gasoline, and fuel and lubricating oils.

    Socketless Push-On Application Chart (GIF)

    Socketless Push-On Assembly (GIF)

  • Speedway Full Flow Swivel Hose End Fitting, 45 Degree, Red/Blue -10 AN
    Speedway Full Flow Swivel Hose End Fitting, 45 Degree, Red/Blue -10 AN
    x
                

    This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings.

    They are manufactured from the highest quality aluminum and are then red and blue anodized to give them a new high performance look. These full flow hose ends use a swivel head design, allowing the fitting to rotate as you are tightening or assembling the hose. These fittings come in a 45 degree angle and are available in a variety of sizes to fit your specific hose diameter. Upgrade your fittings to these full flow hose ends and see the difference.

    • -10 AN
    • 45 degree angle
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Available in a Red/Blue corrosion resistant finish

    Full Swivel Application Chart (GIF)

  • Speedway Replacement EPR2 O-Rings for -4 AN Fittings, Pack/5
    Speedway Replacement EPR2 O-Rings for -4 AN Fittings, Pack/5
    x
                

    Speedway replacment "EPR2" AN fitting O-rings are for use with alcohol or nitro fuels.

    Bag of 5 O-rings.

    Fitting Thread Application Chart (GIF)

  • Aeroquip FBM4033 Full Flow Hose End Coupler Fitting, 90 Degree, -8 AN
    Aeroquip FBM4033 Full Flow Hose End Coupler Fitting, 90 Degree, -8 AN
    x
                

    This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings. Available in swivel with a blue/red anodized finish. For use with Aeroquip AQP® Stainless Steel Racing Hose and Aeroquip StartLite® light-weight hose (part number 617308).

    • -8 AN 
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • Unique taper design ensures easy assembly
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Accepts a variety of lightweight aluminum AN style adapters & fittings
    • Available in Blue/Red corrosion resistant finish

    90° Full Flow Ends come in sizes of AN4, AN6, AN8, AN10, AN12 and AN16.

    Fitting Thread Application Chart (GIF)

  • ALuminum Tube Nut Coupler, -3 AN, 3/16 Inch, 6/Pack
    ALuminum Tube Nut Coupler, -3 AN, 3/16 Inch, 6/Pack
    x
                
    Use these tube nut couplers in conjunction with our tube sleeves (sold seperately) to seal bulkhead fittings to fuel cells, oil tanks and other applications using hard line fitting situations. You need to flare the tube to 37° to match the AN fittings. Not for use with 45° flared lines.

    Fitting Thread Application Chart (GIF)

  • Insulated Brake Line Tube Clamps, Bag/10
    Insulated Brake Line Tube Clamps, Bag/10
    x
                

    You will need these rubber coated fuel line tube clamps and brake line clamps to finish your plumbing job. These tube clamps are made from zinc plated steel, are easy to work with, durable, and corrosion resistant. Choose from a full range of sizes.

    10 clamps per package.

Goto Previous PagePrevious Page
1 2 3 4 5 6 7