Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Muscle Car Headers & Exhaust At Speedway Motors

Speedway Motors has the muscle car headers and mufflers you need, at a price you can afford. Check out our huge inventory of chassis headers, LS1 swap headers and tight-fit block hugger headers, all available with durable ceramic AHC coating, polished, or stainless steel. Don't forget about our cast iron exhaust manifolds and dual exhaust kits as well. With an awesome selection of high performance Flowmaster mufflers, exhaust wrap, glasspacks, and exhaust tips, Speedway can help you get the roar you want from your muscle car without the roar from your wife for spending too much money!

"Muscle Car, Exhaust Pipes" Page 1 of 6

  • Exhaust Reducer, 3 Inch I.D. to 2-1/2 Inch O.D.
    Exhaust Reducer, 3 Inch I.D. to 2-1/2 Inch O.D.
    x
                

    Mild steel exhaust reducer to repair or build your own exhaust system. The swedge for the reduction occurs midway at 2-1/4”.

  • Combo Exhaust Bend, 2 Inch
    $14.99
    Product Rating: 4.87 Stars
    Combo Exhaust Bend, 2 Inch
    x
                Mild steel combo exhaust bends for building or  repairing headers. 16-gauge tubing with 2" O.D.
            
  • Mild Steel Exhaust Bend Kit, 2-1/2 Inch
    Mild Steel Exhaust Bend Kit, 2-1/2 Inch
    x
                

    Sometimes it's just easier to do it yourself than have someone else screw it up for you. These exhaust bend kits include enough tubing to allow you to run your own exhaust system the way you want it. Each pipe is expanded on one end to allow easy installation. Clamps sold separately. Natural, uncoated finish. Not aluminized.

    • Four 48" Straight Pipes
    • Four 90 Degree Pipes
    • Four 45 Degree Pipes 
    • Four 180 Degree U-Bends
  • Mild Steel Exhaust U-Bend, 2 Inch
    Mild Steel Exhaust U-Bend, 2 Inch
    x
                

    16-gauge mandrel bent mild steel U-bends for building your own headers or replacing a bent or damaged tube.

    Size listed is outside diameter.

  • Exhaust Dump Tubes
    From: $12.99
    Product Rating: 5.00 Stars
    Exhaust Dump Tubes
    x
                Build your own open exhaust with our 16" long tube with end cap and bolts. 2" O.D. inlet. Choose black, chrome or stainless steel finish.
            
  • Kickout Pipes, 3-1/2 x 7 Inch
    Kickout Pipes, 3-1/2 x 7 Inch
    x
                Raw steel kickouts are professionally cut and mandrel bent.
            
  • Combo Exhaust Bend, 2-1/2 Inch Diameter
    Combo Exhaust Bend, 2-1/2 Inch Diameter
    x
                These mild steel combo exhaust bends are perfect for building or repairing headers.  They feature smooth mandrel bends with a bend radius of 7" and an outside diameter of 2-1/2". 
    • Mild steel
    • For building or repairing headers
    • 16-gauge (0.06" thick)
    • 2-1/2" O.D

  • Combo Exhaust Bend, 1-3/4 Inch
    Combo Exhaust Bend, 1-3/4 Inch
    x
                
    Mild steel combo exhaust bends for building or repairing headers. 16-gauge tubing with 1-3/4" O.D.
  • Combo Exhaust Bend, 1-1/2 Inch
    Combo Exhaust Bend, 1-1/2 Inch
    x
                
    Mild steel combo exhaust bends for building or repairing headers. 16-gauge tubing with 1-1/2" O.D.
  • Mild Steel Exhaust U-Bend, 2-1/2 Inch
    Mild Steel Exhaust U-Bend, 2-1/2 Inch
    x
                

    18-gauge mandrel bent mild steel U-bends for building your own headers or replacing a bent or damaged tube.

    Size listed is outside diameter.

  • Stainless Steel Oval Exhaust Tip, 2-1/2 Inch Inlet
    Stainless Steel Oval Exhaust Tip, 2-1/2 Inch Inlet
    x
                

    These weld-on, polished stainless steel oval exhaust tips are universal to fit 2-1/2" diameter pipes.  They have a 3" x 5-3/4" outlet and are 11-3/8" long.

    • Weld-on
    • Universal
    • Highly Polished Stainless Steel
    • Oval Design
    • Fit 2-1/2" Diameter Pipes
    • 3" x 5-3/4" outlet
    • 11-3/8" long

     

  • Tight-Tubes Extension Kit, Mild Steel
    Tight-Tubes Extension Kit, Mild Steel
    x
                Using this kit makes the hook-up of your exhaust system a snap! The 2-1/2" diameter, 16-gauge, mandrel-bent tubes curve back at a 90° angle and are offset outward to clear the bellhousing and starter. They drop 10-1/2" from the header flange and they extend backward 17-1/2" after the 90 degree bend. 

    Just trim the length, weld on the 3/8" thick collector flange (included, with gaskets) and you're all set! Works great with any tight-fit headers. Header not included.

  • Dougs Headers H1130 Exhaust Cut-Out Hook-Up Kit, 2-1/2 Inch
    Dougs Headers H1130 Exhaust Cut-Out Hook-Up Kit, 2-1/2 Inch
    x
                

    Avoid an expensive trip to the muffler shop by using this cut-out hookup kit when installing our electric exhaust cut outs. Some fabrication required but no welding nescessary. Kits are sold as a pair and come with mounting hardware.

    These hook-up kits are made for our electric cut-outs but can be used for other applications.

    • Overall length of pipe = 9.00"
    • Length of stepped pipe splicing into exhaust = 2.00" each side
    • Center pipe length (between stepped pipes) = 5.00"
    • Cut out length (center of weld to edge of flange) = 5.50"
    • 40.4 degree angle
  • Combo Exhaust Bend, 1-5/8 Inch
    Combo Exhaust Bend, 1-5/8 Inch
    x
                Mild steel combo exhaust bends for building or repairing headers. 16-gauge tubing with 1-5/8" O.D.
            
  • Mild Steel Exhaust Bend Kit, 2-1/4 Inch
    Mild Steel Exhaust Bend Kit, 2-1/4 Inch
    x
                

    Sometimes it's just easier to do it yourself than have someone else screw it up for you. These exhaust bend kits include enough tubing to allow you to run your own exhaust system the way you want it. Each pipe is expanded on one end to allow easy installation. Clamps sold separately.Tubing has a natural, uncoated finish. (Not Aluminized)

    • Four 48" Straight Pipes
    • Four 90 Degree Pipes
    • Four 45 Degree Pipes 
    • Four 180 Degree U-Bends
  • Combo Exhaust Bend, 1-7/8 Inch
    Combo Exhaust Bend, 1-7/8 Inch
    x
                Mild steel combo exhaust bends for building or  repairing headers. 16-gauge tubing with 1-7/8" O.D.
            
  • Plain Steel Exhaust Megaphone, 1-5/8 x 3-1/2 x 30 Inch
    Plain Steel Exhaust Megaphone, 1-5/8 x 3-1/2 x 30 Inch
    x
                A great looking, great sounding addition to any street rod. Made from 18 gauge mild steel.
            
  • Kickout Pipes, 3 x 7 Inch
    $22.99
    Kickout Pipes, 3 x 7 Inch
    x
                Raw steel kickouts are professionally cut and mandrel bent.
            
  • Mild Steel Exhaust U-Bend, 1-1/2 Inch
    Mild Steel Exhaust U-Bend, 1-1/2 Inch
    x
                

    18-gauge mandrel bent mild steel U-bends for building your own headers or replacing a bent or damaged tube.

    3" Bend Radius 

    Size listed is outside diameter.

  • Mild Steel Exhaust U-Bend, 1-3/4 Inch
    Mild Steel Exhaust U-Bend, 1-3/4 Inch
    x
                

    18-gauge mandrel bent mild steel U-bends for building your own headers or replacing a bent or damaged tube.

    Size listed is outside diameter.

  • Exhaust Elbow, 90 Degree, 3 Inch O.D.
    Exhaust Elbow, 90 Degree, 3 Inch O.D.
    x
                

    3" O.D. mild steel, mandrel bent tubular exhaust elbows to complete your custom exhaust system. Has a 4" centerline radius.

  • Mild Steel Exhaust U-Bend, 1-5/8 Inch
    Mild Steel Exhaust U-Bend, 1-5/8 Inch
    x
                

    18-gauge mandrel bent mild steel U-bends for building your own headers or replacing a bent or damaged tube.

    Size listed is outside diameter.

  • Exhaust Elbow, 90 Degree, 3-1/2 Inch O.D.
    Exhaust Elbow, 90 Degree, 3-1/2 Inch O.D.
    x
                

    3-1/2" O.D. mild steel, mandrel bent tubular exhaust elbows to complete your custom exhaust system. Has a 4" centerline radius.

    • 3.5" O.D.
    • 90 degree angle
    • 4" center line
    • A length: 5 1/4"
    • B length: 2 3/4"
  • Mild Steel Exhaust U-Bend, 1-7/8 Inch
    Mild Steel Exhaust U-Bend, 1-7/8 Inch
    x
                

    18-gauge mandrel bent mild steel U-bends for building your own headers or replacing a bent or damaged tube.

    Size listed is outside diameter.

  • Exhaust Reducer, 3-1/2 Inch I.D. to 3 Inch O.D.
    Exhaust Reducer, 3-1/2 Inch I.D. to 3 Inch O.D.
    x
                

    Mild steel exhaust reducer to repair or build your own.

    • 4-1/2” overall length 
    • Swedge for the reduction occurs midway at 2-1/4”
     

     

  • Stainless Steel Exhaust Bend Kit, 2-1/2 Inch
    Stainless Steel Exhaust Bend Kit, 2-1/2 Inch
    x
                

    Sometimes it's just easier to do it yourself than have someone else screw it up for you. These exhaust bend kits include enough tubing to allow you to run your own exhaust system the way you want it. Each pipe is expanded on one end to allow easy installation. Clamps sold separately. Natural, uncoated finish.

    • Four 48" Straight Pipes
    • Four 90° Pipes
    • Four 45° Pipes 
    • Four 180° U-Bends
  • Polished Stainless Exhaust Tubing
    From: $17.99
    Product Rating: 4.78 Stars
    Polished Stainless Exhaust Tubing
    x
                

    Our fully polished 304 grade stainless steel tubing has a wall thickness of .07". Sizes available are listed by the outside diameter (O.D.) dimension.

    • Available in 1"-3" O.D., sold by the foot
    • Made of 100% polished stainless steel
    • Seamed 15 gauge
    • UPS up to 7'
    • Priced per ft.
    1. If you want us to cut the tubing into smaller lengths than you are ordering, please tell us the lengths of tubing you need by keying that information into our comment area located just above the payment information of Step 2 of the Checkout Process.
    2. If your tubing can be cut in 3 ft. or 4 ft. lengths, the price will be discounted $1.00/ft.
    3. Please keep in mind that the longest piece that can ship by UPS is 7 feet. The longest piece that can ship by truck is 10 feet.
    4. There are no returns on this stainless steel exhaust tubing.

     

  • Chrome Side Exhaust Pipes w/ Mufflers, 60 Inch
    Chrome Side Exhaust Pipes w/ Mufflers, 60 Inch
    x
                

    Give your vehicle that custom look with a classic chrome shielded side exhaust system. Large chrome 2-1/4" I.D. inlet, 3" O.D. chrome outlet pipes and low back pressure six-sided louvered core painted black mufflers guarantee performance and produce a distinctive power tone. Complete installation flexibility is built in with the full 360° rotation feature on both inlet and outlet pipes. Includes mounting hardware.

    Not legal for sale or use in California on pollution controlled motor vehicles.

  • Mild Steel Exhaust Bend, 45 Degree, 2-1/2 Inch
    Mild Steel Exhaust Bend, 45 Degree, 2-1/2 Inch
    x
                

    Each pipe is expanded on one end to allow easy installation. 16-gauge mild steel. Natural, uncoated finish. Not Aluminized.

  • Mild Steel Exhaust U-Bend, 2-1/4 Inch
    Mild Steel Exhaust U-Bend, 2-1/4 Inch
    x
                

    18-gauge mandrel bent mild steel U-bends for building your own headers or replacing a bent or damaged tube.

    Size listed is outside diameter.

  • Dynatech   794-60207 Mild Steel J-Bend, 2-1/4 Inch
    Dynatech 794-60207 Mild Steel J-Bend, 2-1/4 Inch
    x
                

    Dynatech® stocks a complete inventory of mandrel bent J-bends. These are made from premium grade mild steel tubing. The bend radius of each tube is 1.5 times the O.D. of the tubing.

  • Dougs Headers DEC300A Stainless Steel Electric Exhaust Cut-Outs-3 Inch
    Dougs Headers DEC300A Stainless Steel Electric Exhaust Cut-Outs-3 Inch
    x
                These rugged Doug's Headers electric exhaust  cutouts allow you to convert to a wide-open, unobstructed exhaust system  with the flip of a dash-mounted switch. Doug's electric exhaust cutouts  are built to last; they feature full stainless steel construction with a  heavy-duty Dayton gear reduction rack and pinion electric drive  mechanism. Best of all, these cutouts use a self-cleaning, knife-edge  seat for a leakproof seal every time, whether open or closed. Doug's  Headers electric exhaust cutouts include a pre-wired harness, a toggle  switch, and fuses for an easy installation.
    • 3.000 in.
    • Stainless steel
    • Sold as a pair
    • Includes wiring harness
  • Stainless Steel Exhaust Bend, 90 Degree, 2-1/2 Inch
    Stainless Steel Exhaust Bend, 90 Degree, 2-1/2 Inch
    x
                

    Each pipe is expanded on one end to allow easy installation. 16-gauge T304 stainless material. Natural, uncoated finish.

  • Stainless Steel Exhaust Bend, 90 Degree, 2-1/4 Inch
    Stainless Steel Exhaust Bend, 90 Degree, 2-1/4 Inch
    x
                

    Each pipe is expanded on one end to allow easy installation. 16-gauge T304 stainless material. Natural, uncoated finish.

  • SuperMaxx 1998-02 Camaro/Trans Am Intermediate Tubes w/o Cats
    SuperMaxx 1998-02 Camaro/Trans Am Intermediate Tubes w/o Cats
    x
                

    Gain up to 19 HP and 15 Ft. Lbs. over the factory exhaust system! Dynatech® SuperMaxx stainless steel exhaust systems are engineered to give your car winning performance both on and off the track. Designed to be a direct replacement fit for restrictive factory exhaust and catalytic converter systems, these systems are a great way to get that extra power you are looking for.

    • 3/8" laser-cut and machine-ground flanges for a long-lasting, tight seal
    • Computer-designed collectors for maximum air flow
    • Low-profile four-bolt collectors
    • "OEM-style" triple-layer stainless steel gaskets included for long-term, leak-free service

    Fits 1998-1999 and 2000-2002 Chevy Camaro and Pontiac Firebird LS1 (4th Gen. F-Body).

    Warning: Will NOT fit convertible models

    311-71573210 Instructions (PDF)

    311-71573310 Instructions (PDF)

     

  • Dynatech   794-60209 Mild Steel J-Bend, 2-1/2 Inch
    Dynatech 794-60209 Mild Steel J-Bend, 2-1/2 Inch
    x
                

    Dynatech® stocks a complete inventory of mandrel bent J-bends. These are made from premium grade mild steel tubing. The bend radius of each tube is 1.5 times the O.D. of the tubing.

  • Dynatech   SuperMaxx 1997-03 Corvette C5 Intermediate Tubes w/o Cats
    Dynatech SuperMaxx 1997-03 Corvette C5 Intermediate Tubes w/o Cats
    x
                

    Gain up to 30 HP and 30 Ft. Lbs. over factory exhaust! Dynatech® SuperMaxx stainless steel exhaust systems are engineered to give your car winning performance both on and off the track. Designed to be a direct replacement fit for restrictive factory exhaust and catalytic converter systems, these systems are a great way to get that extra power you are looking for.

    • 3/8" laser-cut and machine-ground flanges for a long-lasting, tight seal
    • Computer-designed collectors for maximum air flow
    • Low-profile four-bolt collectors
    • "OEM-style" triple-layer stainless steel gaskets included for long-term, leak-free service
    • Collector Size: 3"
    • System Tube Size: 2-1/2"
    • Material: T-304 Stainless Steel
    • OBD II Compliant: Yes
    • Hardware Included: Gaskets, Bolts, O2 Extensions
    • Fit: Direct Bolt-Up to any factory or aftermarket cat back
    • Install Time: 4-6 hours

    Corvette C5 Installation Instructions (PDF)

  • Mild Steel Exhaust Bend, 180 Degree, 2-1/2 Inch
    Mild Steel Exhaust Bend, 180 Degree, 2-1/2 Inch
    x
                
    • Each pipe is expanded on one end to allow easy installation
    • 16-gauge mild steel
    • Natural, uncoated finish
    • Not aluminized
  • Dynatech   SuperMaxx 2004 Corvette C5 Intermediate Tubes w/ Cats
    Dynatech SuperMaxx 2004 Corvette C5 Intermediate Tubes w/ Cats
    x
                

    Gain up to 30 HP and 30 Ft. Lbs. over factory exhaust! Dynatech® SuperMaxx stainless steel exhaust systems are engineered to give your car winning performance both on and off the track. Designed to be a direct replacement fit for restrictive factory exhaust and catalytic converter systems, these systems are a great way to get that extra power you are looking for.

    • 3/8" laser-cut and machine-ground flanges for a long-lasting, tight seal
    • Computer-designed collectors for maximum air flow
    • Low-profile four-bolt collectors
    • "OEM-style" triple-layer stainless steel gaskets included for long-term, leak-free service
    • Collector Size: 3"
    • System Tube Size: 2-1/2"
    • Material: T-304 Stainless Steel
    • OBD II Compliant: Yes
    • Hardware Included: Gaskets, Bolts, O2 Extensions
    • Fit: Direct Bolt-Up to any factory or aftermarket cat back
    • Install Time: 4-6 hours

    Corvette C5 Installation Instructions (PDF)

  • Chrome Echo Can Tips
    From: $36.99
    Product Rating: 5.00 Stars
    Chrome Echo Can Tips
    x
                These are a blast from the past! Everyone ran echo cans on their flatties in the good 'ol days, now you can too. Big 3-1/2" chrome tips will give you that sound you have been looking for. 2" I.D. inlet, and available in 12" or 18" tips.
            
Goto Previous PagePrevious Page
1 2 3 4 5 6