Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Muscle Car Electrical Wiring & Lights At Speedway Motors

Speedway Motors is your one stop shop for muscle wiring and lighting. Make wiring your hot rod simple with easy-to-use wiring harnesses and step by step instructions. Finish off your muscle car with specialty headlights, LED dome lights, and LED tail lights. Find anything from various switches and relays to hidden radio antennas and let Speedway Motors eliminate any and all of your American muscle car electrical system problems!

Featured Products
Two Post Battery Disconnect Switch
Two Post Battery Disconnect Switch
SKU-91064500
x
            Remote battery disconnect switch for safety and theft protection. A battery kill switch is required for use with alternators by the NHRA. Battery shut off switch can be remote mounted or where specified for saftey and  convenience.
  • 180 amp continuous, 1000 amp instantaneous
  • Die cast lever
  • Fits panel through 3/16" thick

910-64500 Instructions (PDF)

Heavy Duty Turn Signal Switch
Heavy Duty Turn Signal Switch
SKU-91062860
x
            

For early autos not equipped with right and left turn signals. Chrome plated finish. Switch works with 6 or 12 volt systems. Includes wiring diagram. Clamps to any steering column with included stainless hose clamp. Switch has four-way flashers and does not self cancel.

You will need to purchase a three-prong flasher to use with this switch (part number 910-64046 or install kit 91062861). For LED light applications, you will also need a LED dummy load resistor (part number 910-03030).

910-62860 Instructions (PDF)

Universal Headlight Switch With Hi/Low
Universal Headlight Switch With Hi/Low
SKU-91080154
x
            

This headlight switch has four positions. In is off, out one notch is park lights, out another notch is lows beams, and all the way out is high beams. Screw type terminals. 3/8" mounting hole.

910-80154 Instructions (PDF) 

Power Window Kit
$149.99
Product Rating: 4.80 Stars
Power Window Kit
SKU-91123333
x
            
  • Kit for 2 doors
  • Works for all flat glass windows
  • Straight up and down travel only
  • 6"-24" Glass height
  • Includes: Switches, wiring and crossover kit

Instructions (PDF)

"Muscle Car, Electrical, Lighting and Body" Page 1 of 10

  • Lokar SG-6009 Chrome Dimmer Switch Cover, Chevy/Ford
    Lokar SG-6009 Chrome Dimmer Switch Cover, Chevy/Ford
    SKU-4916009
    x
                Brighten up that old dimmer switch with one of these new dimmer switch covers from Lokar!  Made from steel and feature a beautiful chrome finish and a textured rubber pad. 
            
  • Modern Driveline Reverse Switch Harness for GM T5, T56 Transmissions
    Modern Driveline Reverse Switch Harness for GM T5, T56 Transmissions
    SKU-91070002
    x
                

    These harnesses for transmission neutral safety switch/reverse light switches are designed for use with GM T5 and T56 transmissions.

    • Factory style
    • For GM T5 and T56 transmissions

     

  • 1968 Belair/Biscayne LED Tail/Stop Lights
    1968 Belair/Biscayne LED Tail/Stop Lights
    SKU-91137075
    x
                

    Face it, it's hard to see those tail lights on older cars. Now is the time to change out those broken or faded tail lights for new LED versions. 

    • 40 Super Bright LEDS
    • Polycarbonate Lens
    • Epoxy Coated, Fully Sealed Electronics, 1157 Plug
    • Solid State Circuit Boards Designed for 7.7 - 14.0 VDC

     

  • Stewart Warner 279B-F Deluxe Electrical Oil Pressure Sender
    Stewart Warner 279B-F Deluxe Electrical Oil Pressure Sender
    SKU-665279B
    x
                

    Designed to make sure that you get fast, accurate information from your Stewart Warner gauges. 

    • 1/8-27 NPT
    • Electrical
    • Designed to be used with 90° sweep gauges
  • American Autowire 37788 1955 Chevy OEM Style Turn Signal Switch
    American Autowire 37788 1955 Chevy OEM Style Turn Signal Switch
    SKU-91037788
    x
                

    If you're still running the stock column in your 1955 Chevy car, you'll probably need one of these OEM style turn signal switches.  They come complete with the male connector body.

    • 1955 Chevrolet passenger car
    • OEM style replacement
    • Complete with male connector body

     

  • Fuse Block for Glass Fuses
    $9.99
    Product Rating: 5.00 Stars
    Fuse Block for Glass Fuses
    SKU-91064004
    x
                

    Allows easy installation of extra fuses or for use in basic electrical systems. Accepts 7 glass fuses. Also included is two connector strips, one ties three fuses to a common power source and one ties two fuses to a common power source.

  • MSD 8183 2-Pin Deutsch Connector, 16 gauge
    New
    MSD 8183 2-Pin Deutsch Connector, 16 gauge
    SKU-5478183
    x
                There is absolutely no excuse for losing a race due to a poor wiring connection. MSDs Deutsch Connectors are sealed and lock together making them perfect for harsh racing applications. The compact housing of the connectors are molded from a durable plastic material that will not harden or crack. Each housing is indexed to prevent any chance of mismatching the ends plus they have a molded channel to secure another connector for a tidy appearance.The terminals grip to the wire with strong crimp tabs then lock into position inside the housing. The connections are protected with thick seals that will keep water, mud and debris away from the contacts. These terminals can handle more current than conventional connectors and do not require special tools. Supplied with terminals, seals and housings.

    Installation Instructions (PDF)

  • Painless Wiring 50302 6-Switch Fused Panel with Wiring and Hardware
    New
    Painless Wiring 50302 6-Switch Fused Panel with Wiring and Hardware
    SKU-91050302
    x
                

    This heavy duty lightweight switch panel from Painless Performance is designed to mount to a roll bar using standard metal hose clamps. Lighted rocker switches are color coded for quick reference.  All of the circuits are individually fused and are easily accessible for quick testing and replacement. This kit comes complete with 18 ft. of TXL wire, using fully insulated terminals. Made in the USA!

    Installation Instructions (PDF) 

    The Kit Controls:

    • Start
    • Ignition
    • Fuel pump
    • Electric fan/water pump (Switch up position - fan on only / Switch middle position - all off / Switch down position - fan & water pump on)
    • Two accessories

     

     

  • Lokar CC-1600U Carbureted Cruise Control Cable, Black
    Lokar CC-1600U Carbureted Cruise Control Cable, Black
    SKU-491CC1600U
    x
                
    • Lokar cruise control cable is for use with Rostra control kits. Kit includes 4 foot stainless outer housing designed with a specialty extruded liner for extended life of the cable and 5 feet of stainless inner wire, which replaces black plastic cable in Rostra kits. Cables are u-cut-to-fit inside and outside of the firewall. All billet aluminum fittings, stainless hold down clip and mounting bracket. Mount cable to carburetor with Lokar's stainless carburetor bracket and return springs.
    • For Use w/Rostra Control Kits
    • Stainless Housing
    • 5 in. Stainless Inner Wire/4 in. Outer Housing
    • U-Cut-To-Fit Inside And Outside Of Firewall
    • Billet Aluminum Fittings
    • Incl. Hold Down Clip/Mounting Bracket
    • Made In The U.S.A.
    • Lifetime Warranty
  • Stewart Warner 82623B GM Sender for Wings Electronic Speedometer
    Stewart Warner 82623B GM Sender for Wings Electronic Speedometer
    SKU-66582623B
    x
                

    This sending unit for electronic speedometers has a .894" (7/8”) female attachment nut to attach it to the transmission or out-drive unit.  This is similar to the female threaded ring on mechanical speedometer cables. Most customers will need to purchase part number 66582629, square drive tip, to attach this sender to a GM transmission.

  • 1957 Chevy LED Tail Light Conversion Kit
    1957 Chevy LED Tail Light Conversion Kit
    SKU-91131040
    x
                The 1957 Chevy cars were not known to have very bright or visible tail lights. The cure is the addition of LED conversion kits. 

    These replace old 1157 style bulbs with 14 LED bulbs that are much brighter, don't put out much heat and last up to 100,000 hours. Stainless steel hardware and easy 30 minute installation.

    1957 Chevy LED Tail Light Conversion Instructions (pdf)

  • MSD 8961 MSD High Current Relay, SPST
    $26.99
    $29.99
    New
    MSD 8961 MSD High Current Relay, SPST
    SKU-5478961
    x
                MSDs High Current Relays are what you need to activate accessories that draw high current. These Relays are very reliable due to the fully automated manufacturing process and sophisticated coil winding procedure. The SPST High Current Relay is rated at 30 amps with an input voltage of 12 volts DC. The relay is ideal for use with the MSD RPM Activated Switch when 12 volts are responsible for activating a high current device such as a nitrous solenoid.The DPST relay is also rated at 30 amps with a 12 volt input voltage. This Relay is the best choice when 12 volts are required to activate multiple high current devices at the same time such as multiple stage nitrous solenoids.

    Installation Instructions (PDF)

  • MSD 8190 10 Male Pins and Seals
    $8.99
    $9.99
    New
    MSD 8190 10 Male Pins and Seals
    SKU-5478190
    x
                Male pins and seals for use with Weathertight Connectors.
            
  • MSD 8187 4-Pin Deutsch Connector, 12-14 gauge
    New
    MSD 8187 4-Pin Deutsch Connector, 12-14 gauge
    SKU-5478187
    x
                There is absolutely no excuse for losing a race due to a poor wiring connection. MSDs Deutsch Connectors are sealed and lock together making them perfect for harsh racing applications. The compact housing of the connectors are molded from a durable plastic material that will not harden or crack. Each housing is indexed to prevent any chance of mismatching the ends plus they have a molded channel to secure another connector for a tidy appearance.The terminals grip to the wire with strong crimp tabs then lock into position inside the housing. The connections are protected with thick seals that will keep water, mud and debris away from the contacts. These terminals can handle more current than conventional connectors and do not require special tools. Supplied with terminals, seals and housings.

    Installation Instructions (PDF)

    • Sealed Connectors
  • EMPI 16-2059 Bullet Light Assembly, Convex Red, Each
    EMPI 16-2059 Bullet Light Assembly, Convex Red, Each
    SKU-1412059
    x
                

    EMPI Bullet lights feature a high power 12-Volt 50 watt halogen bulb with a mirror finish reflector. The compact (approximately 3-1/2" tall by 2-1/2" diameter) housing is made of precision machined aluminum.

    • Bullet Light w/ Red Lens
    • Precision machined aluminum housing
    • Mounts on flat or slightly rounded surfaces
    • Sold Each

  • MSD 8184 2-Pin Deutsch Connector, 12-14 gauge
    New
    MSD 8184 2-Pin Deutsch Connector, 12-14 gauge
    SKU-5478184
    x
                There is absolutely no excuse for losing a race due to a poor wiring connection. MSDs Deutsch Connectors are sealed and lock together making them perfect for harsh racing applications. The compact housing of the connectors are molded from a durable plastic material that will not harden or crack. Each housing is indexed to prevent any chance of mismatching the ends plus they have a molded channel to secure another connector for a tidy appearance.The terminals grip to the wire with strong crimp tabs then lock into position inside the housing. The connections are protected with thick seals that will keep water, mud and debris away from the contacts. These terminals can handle more current than conventional connectors and do not require special tools. Supplied with terminals, seals and housings.

    Installation Instructions (PDF)

    • Waterproof
    • Quick Connect
  • MSD 8910 Tach Adapter
    $42.99
    $50.99
    New
    MSD 8910 Tach Adapter
    SKU-5478910
    x
                If, after installing an MSD Ignition Control, your ta�chometer, fuel pump relay or electronic fuel injection (in foreign vehicles) doesnt operate correctly, your ap�plication may require a Tach Adapter. This is due to the trigger signal not being strong enough to trigger both the MSD and the factorys components.There are a few Tach Adapters available and for more information see pages 152 and 153. Each Adapter is simple to wire in and will have your MSD and vehicle firing away in no time! If you are triggering an MSD Blaster, 5, 6, SCI, or 7 Series Ignition with its white wire or points terminal, you will need the PN 8910 Tach Adapter. The PN 8910 will correct the operation of most voltage-triggered tachometers or fuel injection systems that do not work directly off the tach output terminal of the MSD Ignition Unit.

    Installation Instructions (PDF)

    Installation Instructions (PDF)

    • Lokar SP-1506U Early Ford Speedo Cable Kit w/Ford End, Black Housing
      Lokar SP-1506U Early Ford Speedo Cable Kit w/Ford End, Black Housing
      SKU-491SP1506U
      x
                  Premium housing designed with a specially extruded liner for extended life of the cable and billet aluminum fittings. Inner cable and outer housing are "U-Cut-to-Fit". Kit comes complete with all fittings and is available for GM, Ford and Chrysler applications. (Gauges not included)
      Lokar Speedometer Cables are designed to work with most cable driven aftermarket speedometer gauges (such as Auto Meter, Stewart Warner, VDO, Classic Instruments, etc.) or factory speedometer.
      Lokar Speedometer Cables are designed to fit into the transmission gear adapter (not supplied in Chevy or Chrysler Lokar Kit). Customer must have the trans end adapter and speedometer gear for all Chevy and Chrysler applications. For Ford applications, the gear adapter is supplied in the Lokar Kit. Customer must supply the speedo gear and speedo gear retainer clip.
      • All Lokar Speedometer Cables are seven feet (7') long
      • Designed to be "U-Cut-to-Fit".
      • Additional length cable in black or stainless housing is available upon request for an additional charge.
      • Must have a 3/4 - 20 female thread at the speedometer
    • 1955 Chevy LED Tail Light Conversion Kit
      1955 Chevy LED Tail Light Conversion Kit
      SKU-91131030
      x
                  The 1955 Chevy cars were not known to have very bright or visible tail lights. The cure is the addition of LED tail light conversion kits. 

      These replace old 1157 style bulbs with 14 LED bulbs that are much brighter, don't put out much heat and last up to 100,000 hours. Stainless steel hardware and easy 30 minute installation.

      1955 Chevy LED Tail Light Conversion Instructions (pdf)

    • Lokar XBAG-6109 Midnight Series Oval Billet Aluminum Dimmer Cover
      Lokar XBAG-6109 Midnight Series Oval Billet Aluminum Dimmer Cover
      SKU-491XBAG6109
      x
                  
      • Oval Billet Aluminum Dimmer Cover – Brushed
      • Black Anodized Billet Aluminum 
      • Made In The U.S.A.

       

    • Safety Kill Switch
      $19.99
      Product Rating: 4.50 Stars
      Safety Kill Switch
      SKU-91364384
      x
                  

      This is the best kill switch we've found! Works with standard ignition only. Water resistant with O-ring shaft seal. Pull on, push off with silver contacts.

      20 amp rating at 12 VDC.

    • MSD 8180 6- Pin Deutsch Connector, 16 gauge
      New
      MSD 8180 6- Pin Deutsch Connector, 16 gauge
      SKU-5478180
      x
                  There is absolutely no excuse for losing a race due to a poor wiring connection. MSDs Deutsch Connectors are sealed and lock together making them perfect for harsh racing applications. The compact housing of the connectors are molded from a durable plastic material that will not harden or crack. Each housing is indexed to prevent any chance of mismatching the ends plus they have a molded channel to secure another connector for a tidy appearance.The terminals grip to the wire with strong crimp tabs then lock into position inside the housing. The connections are protected with thick seals that will keep water, mud and debris away from the contacts. These terminals can handle more current than conventional connectors and do not require special tools. Supplied with terminals, seals and housings.

      Installation Instructions (PDF)

      • Waterproof
      • Heat Shrinkable
      • Battery Quick Disconnects
      • Special Tools
      • Perma-Seal
      • Weather Pack
      • Deutsch
      • Quick Connect
    • MSD 8956 Window RPM Activated Switch
      $87.99
      $112.99
      New
      MSD 8956 Window RPM Activated Switch
      SKU-5478956
      x
                  These RPM-Activated Switches will perform a variety of different functions from turning on a bulb or solenoid to activating an MSD Timing Control at a desired rpm.The RPM-Activated Switch, PN 8950, has two activation wires; one to ground a circuit and the other to open a circuit. Simply plug in an rpm module and wire the Switch to the circuit you want to activate. When the engine rpm reaches that amount, the circuit is activated and will remain on until the rpm falls below that amount.The RPM Window Switch, PN 8956, has two rpm adjustments; one to activate a circuit, while the other deactivates the same circuit. This Switch will supply then remove ground to a circuit. This is a great feature to deactivate nitrous before the engines rev limit is reached. Both Switches can be used with stock inductive ignitions or an MSD Ignition and can handle up to 1.5 amps. No rpm modules are supplied so they must be ordered from the selection of Modules shown here. For use on 4, 6, or 8-cylinder engines.

      Installation Instructions (PDF)

      • 2 RPM Adjustments
      • Activate a circuit
      • Deactivate a circuit
    • Speedway 2005-2006 LS2/4L65E Wiring Harness, Extended
      Speedway 2005-2006 LS2/4L65E Wiring Harness, Extended
      SKU-91050064
      x
                  

      Take the fear out of electronic fuel injection! These engine wiring harnesses are designed to make your engine transplant effortless. Each new harness contains in-depth application-specific instruction sheets, clearly marked factory GM connectors, labeled GXL jacketed wire, GM color coding, and pre-fitted corrugated slit loom for an extra value and professional look. All un-needed emissions wiring is eliminated to make the install as simple and reliable as possible.

      2005-2006 LS2/E40 24X Reluctor and 4L65E Transmission

      • Made from premium grade GXL jacketed automotive wire
      • Most wiring is larger gauge than stock application for durability
      • No splices to reduce points of failure
      • All primary grounding is done at the head or block and grounding points are isolated from each other to reduce electrical interference and minimize ground looping
      • Harness wiring matches GM wiring configuration and jacket colors follow GM color coding for easy identification
      • All electrical connectors are made by Delphi or Packard and are direct fit for GM cars and trucks
      • Can be installed to run engine in 20 minutes, but figure 4-6 hours for a professional installation
      • Diagnostic connector or OBD2 port for connection to scanners and tuning tools
      • Made in the USA.
    • Modern Driveline GM Reverse Lock Out Wiring Harness, T-56 Transmission
      Modern Driveline GM Reverse Lock Out Wiring Harness, T-56 Transmission
      SKU-91070003
      x
                  New reverse lockout connector for LS1 and LT1 vehicles equipped with a T56 6 speed manual transmission.    
      • Manufactured from original GM components
      • Terminals crimped with proper GM tooling
      • GM's quality standards
      • Fits GM applications
    • Replacement 12 Volt Vintage Style Fog Light Bulb, Amber Lens
      New
      Replacement 12 Volt Vintage Style Fog Light Bulb, Amber Lens
      SKU-911364003
      x
                  

      These vintage style fog lights are replacement for our fog light assemblies (91130653, 91130654, 911364007, and 911364008).  They feature an amber lens, and are perfect for your vintage street rod or custom ride.

      • Replacement for our 12 volt fog light assemblies
      • Amber lens
      • Vintage Lens Pattern Design From the 1940's
      • Quartz Halogen with Replaceable H3 Bulb, 35 Watt

       

    • MSD 8920 Tach Adapter, Magnetic Trigger
      $60.99
      $77.99
      New
      MSD 8920 Tach Adapter, Magnetic Trigger
      SKU-5478920
      x
                  If, after installing an MSD Ignition Control, your ta�chometer, fuel pump relay or electronic fuel injection (in foreign vehicles) doesnt operate correctly, your ap�plication may require a Tach Adapter. This is due to the trigger signal not being strong enough to trigger both the MSD and the factorys components.There are a few Tach Adapters available and for more information see pages 152 and 153. Each Adapter is simple to wire in and will have your MSD and vehicle firing away in no time! If you are using the magnetic pick-up input (green and violet wires) to trigger your MSD Ignition, you will need the PN 8920 Tach Adapter. The PN 8920 will correct the operation of most voltage-triggered tachometers that do not work directly off the tach output terminal of the MSD Control. This Adapter should also be used on current-triggered tachs (hooked in series with the ignition switch).

      Installation Instructions (PDF)

      • If you are connecting a tachometer to an MSD Ignition, or your application is equipped with electronic fuel injection then you may need to use this Tach/Fuel Injection Adapter to ensure correct operation. This Adapter will correct the operation of most tachometers and fuel injection pump relays that do not work directly off of the MSD Ignitions 12 volt square wave tach output terminal.
    • Lokar CC-1603HT Tuned-Port Cruise Control Cable, Stainless
      Lokar CC-1603HT Tuned-Port Cruise Control Cable, Stainless
      SKU-491CC1603HT
      x
                  
      • Lokar cruise control cable is for use with Rostra control kits. Kit includes 4 foot stainless outer housing designed with a specialty extruded liner for extended life of the cable and 5 feet of stainless inner wire, which replaces black plastic cable in Rostra kits. Cables are u-cut-to-fit inside and outside of the firewall. All billet aluminum fittings, stainless hold down clip and mounting bracket. Mount cable to carburetor with Lokar's stainless carburetor bracket and return springs.
      • For Use w/Rostra Control Kits
      • Stainless Steel Housing
      • 5 in. Stainless Inner Wire/4 in. Outer Housing
      • U-Cut-To-Fit Inside And Outside Of Firewall
      • Billet Aluminum Fittings
      • Incl. Hold Down Clip/Mounting Bracket
      • Made In The U.S.A.
      • Lifetime Warranty
    • Painless Wiring 70402 Two Wire Weatherpack Connectors
      Painless Wiring 70402 Two Wire Weatherpack Connectors
      SKU-91012212
      x
                  

      A real water-tight connection. Each number consists of one male and one female component. Accepts 14 - 16 gauge wire.

    • Universal Headlight Switch With Hi/Low
      Universal Headlight Switch With Hi/Low
      SKU-91080154
      x
                  

      This headlight switch has four positions. In is off, out one notch is park lights, out another notch is lows beams, and all the way out is high beams. Screw type terminals. 3/8" mounting hole.

      910-80154 Instructions (PDF) 

    • MSD 8812 Universal, Push Button, Alt. Action Switch
      New
      MSD 8812 Universal, Push Button, Alt. Action Switch
      SKU-5478812
      x
                  This switch is designed to be used as an auxiliary ignition On/Off but�ton. It can be mounted to the steering wheel within easy reach of the driver and can be used in a Normally Open or Normally Closed position. Assembled and constructed for harsh racing conditions.

      Installation Instructions (PDF)

      • Lokar SP-1505HT Pre-1948 Ford Speedometer Cable Kit, Stainless Housing
        Lokar SP-1505HT Pre-1948 Ford Speedometer Cable Kit, Stainless Housing
        SKU-491SP1505HT
        x
                    

        Premium housing designed with a specially extruded liner for extended life of the cable and billet aluminum fittings. Inner cable and outer housing are "U-Cut-to-Fit". Kit comes complete with all fittings and is available for GM, Ford and Chrysler applications. (Gauges not included)
        Lokar Speedometer Cables are designed to work with most cable driven aftermarket speedometer gauges (such as Auto Meter, Stewart Warner, VDO, Classic Instruments, etc.) or factory speedometer.
        Lokar Speedometer Cables are designed to fit into the transmission gear adapter (not supplied in Chevy or Chrysler Lokar Kit). Customer must have the trans end adapter and speedometer gear for all Chevy and Chrysler applications. For Ford applications, the gear adapter is supplied in the Lokar Kit. Customer must supply the speedo gear and speedo gear retainer clip.

        Installation Instructions (PDF) 

        • All Lokar Speedometer Cables are seven feet (7') long
        • Designed to be "U-Cut-to-Fit".
        • Additional length cable in black or stainless housing is available upon request for an additional charge.
        • Must have a 3/4 - 20 female thread at the speedometer
      • Auto Meter 2258 Sending Unit, Water Temperature
        Auto Meter 2258 Sending Unit, Water Temperature
        SKU-1822258
        x
                    

        1/8" npt sending unit that includes both 3/8" npt and 1/2" npt fitting adapters.

      • Painless Wiring 60218 1999-2005 GM Vortec Engine Harness, Extended
        Painless Wiring 60218 1999-2005 GM Vortec Engine Harness, Extended
        SKU-91060218
        x
                    Please view the product's page for more information
                
      • Turn Signal Switch for Speedway Tilt Steering Columns
        New
        Turn Signal Switch for Speedway Tilt Steering Columns
        SKU-91053237
        x
                    

        This is a replacement turn signal switch assembly for Speedway tilt steering columns. It fits most GM '69-up and aftermarket tilt columns.

        Includes:

        • Complete pigtail
        • Hazard knob and spring
        • Adapter for earlier GM vehicle connection
      • Universal Electric Window Switch
        Universal Electric Window Switch
        SKU-9100679
        x
                    
        • Fits All Vehicles
        • Includes 5 Shafts to Fit All Window Cranks
        • 15 Degrees Up Or Down Activates The Switch
        • Billet Aluminum
        • Dead Lock Stop Design Will Not Break
        • Works With All Power Window Systems
        • Ultra Thin Design
        • Designed In The USA
        • Manufacturer Lifetime Warranty
        • Smallest System On The Market
        Instructions (PDF)
      • Universal Dash Harness for Mechanical Speedometer
        Universal Dash Harness for Mechanical Speedometer
        SKU-91064025
        x
                    

        If you want to keep your under-dash area organized or you think that you will need to remove gauges from time to time, then you need to install this universal gauge harness. It will connect to all major brand gauges including Auto Meter and VDO and works with most dash layouts and sizes.

        Includes all connections for volt meter, oil pressure, temperature, tachometer, speedometer and fuel gauges, plus high beams and turn signals. For cable drive speedometer only.

        Universal Dash Mechanical Speedometer Wiring Instructions (PDF) 

      • American Autowire 35785 1957 Chevy O/E Wiring Harness
        American Autowire 35785 1957 Chevy O/E Wiring Harness
        SKU-446574
        x
                    

        This wiring harness adapts the OEM 1957 harness to the aftermarket Ididit column. The Ididit column uses the flat ribbon plug common to the later GM columns and should be adaptable to work with the later GM columns and other aftermarket columns using the GM ribbon style flat plug in. As always, wiring layout and sequence will need to be verified for each circuit.

        • Stock o/e harness to an Ididit steering column
        • Chevrolet Passenger 1957
        • For 1969-74 GM column to stock dash

        Note: Adapts horn, directionals, hazard flasher to stock dash

         

      • Modern Driveline Electric Speedometer Harness, Ford TKO Transmission
        Modern Driveline Electric Speedometer Harness, Ford TKO Transmission
        SKU-910700020
        x
                    

        This is a new electric speedometer pigtail harness connector for Ford TKO 500, 600 transmissions.

        • Manufactured from quality components
        • Factory quality standards
        • Fits Ford applications
        • TKO 500, 600 transmissions

         

      • Modern Driveline Electric Speedometer Harness for GM TKO Transmission
        Modern Driveline Electric Speedometer Harness for GM TKO Transmission
        SKU-910700021
        x
                    

        This is a new electric speedometer pigtail harness connector for GM TKO transmissions.

        • Manufactured from quality components
        • Factory quality standards
        • Fits GM applications
        • TKO transmissions
      Goto Previous PagePrevious Page
      1 2 3 4 5 ... 10