Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Muscle Brakes At Speedway Motors

Speedway Motors is the #1 authority on disc brakes conversion kits. With the most experience in the American muscle car business, you can be assured that you are getting a quality and precise fitting kit. Insist on a Speedway front disc brake conversion kit for your classic Chevy, Ford or Mopar muscle car. Don't forget to check out our huge selection of dropped spindles, master cylinders, flaring tools and proportioning valves. Stock up on all the essential brake lines, brake rotors, brake pads and fittings, too!

"Muscle Car, Disc Brakes and Accessories" Page 1 of 10

  • Wilwood 120-13529-BK Forged Dynalite-M Disc Brake Caliper, Black
    New
    Wilwood 120-13529-BK Forged Dynalite-M Disc Brake Caliper, Black
    x
                

    The Forged Billet Dynalite-M is specifically designed to enhance outboard clearance and is the basis for Wilwood’s new Classic Style brake kits. The latest applied developments and innovations in caliper design and manufacturing processes have resulted in substantial improvements in strength and performance over all comparable models.

    • Aluminum construction
    • Black Powder coat finish
    • 3.3 Pounds
    • Mount Center: 5.25 Inches
    • Mount Type: Lug
    • Mount Side: Universal
    • Type: Stainless
    • 4 Piston
    • Minimum Rotor Diameter: 10.00"
    • Maximum Rotor Diameter: 13.06"
    • Rotor Width: 1"
    • Piston Bore: 1.75"
    • Inlet Thread Size: 1/8-27 NPT
    • Strongest calipers in it's class, with weights starting at 2.80 pounds
  • Hawk HB119A.594 Performance 1978-Up HPS Brake Pads, DTC-15
    Hawk HB119A.594 Performance 1978-Up HPS Brake Pads, DTC-15
    x
                

    Get superior stopping power with Hawk Performance! Hawk Performance brake pads have been successful in virtually all forms of motorsports for over 16 years. This success helps Hawk Performance enjoy the benefits of the “Win on Sunday, Sell on Monday,” philosophy. Hawk is one of few brake pad manufacturers that can deliver on the promise, “Race Proven – Street Legal.”

    • Increased stopping power
    • High friction/torque hot or cold
    • Gentle on rotors
    • Extended pad life
    • Low dust
    • Virtually noise-free

    Tech Tip:  Only use full metallic pads on coated rotors.

    Sold as a set of 4, 1 set will be needed to outfit 2 calipers.

    Brake Pad Brand Guide (Link) 

    Learn how to properly Bed-In your brake pads by reading our tech article.  Bedding-In Brake Pad Procedure.

     

  • Wilwood 140-2111-B Rear Brake Kit - Olds/Pontiac, 2.81 Offset
    Wilwood 140-2111-B Rear Brake Kit - Olds/Pontiac, 2.81 Offset
    x
                

    Wilwood FDL Pro-Series rear disc brake kits provide a complete solution for the uncommon Olds/Pontiac rear axles on applications where parking brake assemblies are not required. Forged billet Dynalite four piston calipers, two-piece hat and rotor assemblies, and high friction pads provide optimized and balanced braking for all types of customized applications.

    • Piston Area (in²): 3
    • 1/8" NPT inlet
    • Minimum Wheel Diameter (in): 15
    • BP-10 Smart pads

    These kits do not have emergency brake provisions.

    Dynalite Rear Axle Kit Installation Instructions (PDF)

    Exploded Installation Schematic 

    Kit fits some 15" wheels. Check wheel clearance diagram in kit installation instructions before purchase.

    Axle Flange Identification Chart 

  • Basic Disc Brake Kit, 1955-64 Chevy Fullsize Car, Stock Spindle
    Basic Disc Brake Kit, 1955-64 Chevy Fullsize Car, Stock Spindle
    x
                

    This kit allows you to put front disc brakes on your 1955-64 fullsize Chevy passenger car (Bel-Air, Biscayne, Impala, 150 Series, 210 Series) OEM spindles (will NOT work with dropped spindles). It will work with 14" wheels intended for disc brakes, as well as most 15" (or larger) wheels. Works with 5 on 4-3/4 inch bolt patterns.

    Use with our 11" rotor 910-65390 and metric caliper 910-31045 (see Notes). This kit will increase track width 3/8" per side or or 3/4" total when installed.

    Kit Includes:

    • Brake brackets
    • Hardware
    916-31931 Instructions (PDF)
  • GM Caliper Slider Bolt
    $2.99
    Product Rating: 4.50 Stars
    GM Caliper Slider Bolt
    x
                The overall length of these slide bolts is 4-3/8".  The underhead length is 3-3/8".  The thread on the bolts is 7/16-20 (US fine). 
            
  • Wilwood 140-7675 FDL 12.19 Inch Front Brake Hub Kit, 1967-72 GM
    Wilwood 140-7675 FDL 12.19 Inch Front Brake Hub Kit, 1967-72 GM
    x
                

    Need a big brake package that can scrub off serious speed and look great doing it?Wilwood's Forged Dynalite Pro-Series Front Hub Kits offer complete disc brake upgrade solutions for traditionaldisc brakespindle applications onclassic Chevymuscle cars. All kits can be used with manual or power boost master cylinders.

    12.19" Big Brake Series features:

    • Forged 4-pistonDynalite Calipers - black finish
    • 12.19" diameter Ultralite HP 32 Vane rotors - plain finish
    • Wilwood BP-10SmartPads - low noise, low dust
    • Lightweight anodized aluminum Pro Street hubs
    • Minimum wheel diameter of 16"

    All kits include calipers, hubs, rotors, brackets and hardware needed. Brake hoses sold separately.

    835-1407675 Instructions (PDF)

     

  • Wilwood 120-13529-RD Forged Dynalite-M Disc Brake Caliper, Red
    New
    Wilwood 120-13529-RD Forged Dynalite-M Disc Brake Caliper, Red
    x
                

    The Forged Billet Dynalite-M is further enhancement of the venerable Forged Dynalite series calipers. Specifically designed to enhance outboard clearance and is the basis for Wilwood’s new Classic Style brake kits. The latest applied developments and innovations in caliper design and manufacturing processes have resulted in substantial improvements in strength and performance over all comparable models.

    • Aluminum construction
    • Red Powder coat finish
    • 3.3 Pounds
    • Mount Center: 5.25 Inches
    • Mount Type: Lug
    • Mount Side: Universal
    • Type: Stainless
    • 4 Piston
    • Minimum Rotor Diameter: 10.00"
    • Maximum Rotor Diameter: 13.06"
    • Rotor Width: 1"
    • Piston Bore: 1.75"
    • Inlet Thread Size: 1/8-27 NPT
    • Strongest calipers in it's class, with weights starting at 2.80 pounds
  • Wilwood 150-8936K BP-10 GM Metric 1978-Up Brake Pads
    Wilwood 150-8936K BP-10 GM Metric 1978-Up Brake Pads
    x
                

    Speedway Motors is your one-stop shop for GM 1978-Up Midsize caliper brake pads.

    • Medium friction, smooth engagement, low abrasion on iron rotors.
    • Flat torque curve.
    • Low to medium wear rate, increases as temperature increases.

    Brake Pad Brochure (PDF)

    Tech Tip:  Only use full metallic pads on coated rotors.

    Tech Tip: You can fine tune your car's brake system by selecting different compounds for the front and rear, or side to side. 

    Sold as a set of 4, 1 set will be needed to outfit 2 calipers.

    Brake Pad Brand Guide (Link) 

    Learn how to properly Bed-In your brake pads by reading our tech article.  Bedding-In Brake Pad Procedure.

  • 1969-1972 GM Midsize 11 Inch Brake Rotor, 5 on 4 3/4 Inch
    1969-1972 GM Midsize 11 Inch Brake Rotor, 5 on 4 3/4 Inch
    x
                

    We stock those hard-to-find replacement brake rotors for your 1969-1972 GM midsize car. These rotors are specifically designed for the rigors of dirt track racing.  Drilled with a 5-on-4.75" bolt circle. Includes 7/16" fine quick-start wheel studs (installed).

    • 1969-1972 GM Midsize
    • 11 Inch Brake Rotor
    • 5 on 4-3/4 Inch
    • 7/16" fine studs installed
    • 11" diameter x 1"
    • IMCA Approved

    This rotor is designed for dirt track applications and should NOT be used for asphalt racing.

     

     

  • Speedway Pro-Lite Vented Brake Rotor, 11.75 x .81 Inch
    Speedway Pro-Lite Vented Brake Rotor, 11.75 x .81 Inch
    x
                

    Every rotor is cast from premium grade, long grain carbon iron which exhibits long wear, high thermal stability, and excellent resistance to distortion in high heat. Modern foundry and machining techniques hold close tolerances on face and vane thickness. Combining the correct face thickness with a 32 vane casting provides superior heat management and long service life with low rotating and unsprung weight. The straight vane design also makes it possible to use the same rotor on left or right hand mounting locations.

    • Thickness: GM .810"
    • Outside Diameter: 11.75"
    • # Holes: 8
    • Bolt Circle: 7"
    • Thread: Thru
    • Weight: 8.00 lbs

    Pro-Lite Rotor Application Chart (GIF)

  • Speedway Deluxe 1964-74 GM Car Front Disc Brake Kit
    Speedway Deluxe 1964-74 GM Car Front Disc Brake Kit
    x
                

    Front disc brakes provide a significant improvement in braking performance versus the drum brakes your car came with. This complete front disc brake conversion kit fits 1964-72 GM A-Body, 1967-69 GM F-Body and 1968-74 X-Body using your stock disc brake spindles or our new replacement stock height disc brake spindles # 910-34900.

    Kit includes 11" diameter vented brake rotor with 5 on 4-3/4" wheel bolt pattern, '69-'77 GM style calipers (7/16"-20 inlets), caliper brackets, brake pads, backing plates, rubber brake lines, and all necessary bearings, seals and hardware for an easy, complete installation onto factory disc brake spindles.

    Note:  Brake kit will not fit our 2" dropped spindles # 910-34906 or stock drum brake spindles. Must be used with stock style disc brake spindles and 15" diameter or larger wheels.

    910-31958 Instructions (PDF)

  • GM 10 & 12 Bolt Bolt-On Rear Disc Brake Kit
    GM 10 & 12 Bolt Bolt-On Rear Disc Brake Kit
    x
                

    If you don't want to spend an arm and a leg on a rear disc brake kit and still have to weld the bracket on, we've got you covered. This complete kit includes two bolt-on caliper brackets, two 11-1/4" vented rotors, two GM metric style calipers, brake pads and hardware.

    • Rotors have both 5 on 4-1/2" and 5 on 4-3/4" bolt circles
    • Fits axle with a maximum flange diameter of 6-1/4" O.D.
    • 2.780" rotor center hole
    • Does not fit all 10 & 12 bolt axles. Check Application tab for details. 

    Axle Flange Identification Chart (GIF)

    910-31919 Instructions (PDF)

  • Wilwood Gator 1969-77 GM Mid-Size Brake Pads
    Wilwood Gator 1969-77 GM Mid-Size Brake Pads
    x
                

    Speedway Motors is your one-stop shop for GM 1969-77 Midsize caliper brake pads.

    Brake Pad Brochure (PDF)

    Tech Tip:  Only use full metallic pads on coated rotors.

    Sold as a pair of 2. One pair will outfit 1 caliper.

    Brake Pad Brand Guide (Link) 

    Learn how to properly Bed-In your brake pads by reading our tech article.  Bedding-In Brake Pad Procedure.

  • Wilwood 140-2117-B Rear Brake Kit - Mopar/Dana Axle, 2.36 Offset
    Wilwood 140-2117-B Rear Brake Kit - Mopar/Dana Axle, 2.36 Offset
    x
                

    Wilwood FDL Pro-Series rear disc brake kits provide a complete solution for the popularMopar/Danarear axles on applications where parking brake assemblies are not required. Forged billet Dynalite four piston calipers, two-piece hat and rotor assemblies, and high friction pads provide optimized and balanced braking for all types of customized applications.

    • Ultralite HP 32 Curved Vane Vented Rotor - 12.19" x .810"
    • Forged billet Dynalite four-piston calipers
      • Piston Area (in²): 3
      • 1/8" NPT inlet
    • Minimum Wheel Diameter (in): 15
    • BP-10 Smart pads
    • Aluminum mounting brackets and hardware

    This kit will fit Mopar 8 3/4" and Dana 60 rear axlesequipped with green non-adjustable bearings (Mopar P/N RP400). These kits do not have emergency brake provisions.

    Wilwood Rear Brake Kit Installation Instructions (PDF)

    Axle Flange Identification Chart

    Exploded Installation Schematic

  • AFCO 7250-0200 Complete Rear Disc Brake Kit, 2-1/2 Inch Piston
    AFCO 7250-0200 Complete Rear Disc Brake Kit, 2-1/2 Inch Piston
    x
                Complete kit with standard GM metric calipers. Mounts vented rotors and calipers to 3" tube rearend. Complete with rotors, hats, calipers, brackets, brake pads and slide bolts. Hat fits 4-1/2", 4-3/4" and 5" bolt circle. 
            
  • Speedway 156 1969-77 GM Mid-Size Brake Pads
    Speedway 156 1969-77 GM Mid-Size Brake Pads
    x
                

    Speedway Motors is your one-stop shop for GM 1969-77 Midsize caliper brake pads.

    Tech Tip:  Only use full metallic pads on coated rotors.

    Sold as a pair of 2. One pair will outfit 1 caliper.

    Brake Pad Brand Guide (Link) 

    Learn how to properly Bed-In your brake pads by reading our tech article.  Bedding-In Brake Pad Procedure.

     

  • Wilwood 150-9764K BP-10 Street Performance Pads
    Wilwood 150-9764K BP-10 Street Performance Pads
    x
                

    Medium friction compound with the low noise and low dust of a street performance compound and the increased friction characteristics of a semi-metallic race compound. Smooth engagement with consistent response from a flat torque curve throughout its entire effective temperature range.  Good low to middle temperature wear rates.  Beds quickly and provides fast response without excessive abrasion on vented iron rotors.

    Learn how to properly Bed-In your brake pads by reading our tech article.  Bedding-In Brake Pad Procedure.

  • Mustang II Disc Brake Rotor, 5 on 4-1/2 Inch
    Mustang II Disc Brake Rotor, 5 on 4-1/2 Inch
    x
                

    Vented stock 9-1/4" diameter brake rotors for 1974-1980 Mustang II, Pinto, or Bobcat spindles (or Speedway brake kits using '49-'54 Chevy spindles). Brake rotors are new, not plugged or re-drilled. Has a 5 on 4-1/2" bolt pattern with corresponding 1/2" diameter fine thread wheel studs.

    • Outside Diameter of rotor disc - 9.256"
    • Thickness of vented disc - .884"
    • I.D. of back side of rotor - 6.256"
    • Rear rotor face to bearing hub - .290"
    • Outer hub diameter where wheel will mount - 5.834"
    • Outer hub height - 1.450"
    • Bearing snout is 1.60" tall, 2.55" diameter at bottom and 2.384" at outer
      end.

    Be sure to install new bearings and seals (910-31000) with your new disc brake rotors.

  • Ford 9 Inch Bolt-On Rear Disc Brake Kit w/ E-Brake
    Ford 9 Inch Bolt-On Rear Disc Brake Kit w/ E-Brake
    x
                

    If you don't want to spend an arm and a leg on a rear disc brake kit and still have to weld the bracket on, we've got you covered. This kit includes bolt-on caliper brackets, 11-1/4" vented rotors, '78-'88 GM emergency brake calipers, brake pads and hardware.

    • Fits both 5 on 4-1/2" and 5 on 4-3/4" bolt circles
    • For Ford passenger car axles ONLY 
    • Fits axle with maximum flange diameter of 6-1/4" O.D.
    • For 15" and larger wheel applications ONLY

    NOTE: This bolt on brake kit is designed to be used on 8" and 9" housings using 3/8" retaining bolts. If you want to use it on a 9" housing with 1/2" bolts, you will need to use the 3/8" hardware to do so. Fits "old" and "new" style big bearing (3.150" bearing O.D.) Ford housings and with axle offsets of a minimum 2-3/8" to 2-1/2".

    Axle Flange Identification Chart (GIF)

    910-31921 Instructions (PDF)

  • Wilwood 15E-6102K Poly-E 1969-77 GM Mid-Size Brake Pads
    Wilwood 15E-6102K Poly-E 1969-77 GM Mid-Size Brake Pads
    x
                

    Speedway Motors is your one-stop shop for GM 1969-77 Midsize caliper brake pads.

    Brake Pad Brochure (PDF)

    Tech Tip:  Only use full metallic pads on coated rotors.

    Sold as a set of 4, 1 set will be needed to outfit 2 calipers.

    Brake Pad Brand Guide (Link) 

    Learn how to properly Bed-In your brake pads by reading our tech article.  Bedding-In Brake Pad Procedure.

  • Wilwood 160-13500 GT 48 Curved Vane Spec-37 LH Iron Rotor, 11.75 Inch
    New
    Wilwood 160-13500 GT 48 Curved Vane Spec-37 LH Iron Rotor, 11.75 Inch
    x
                

    Wilwood's GT 48 Curved Vane Spec-37 rotors are manufactured from a proprietary iron alloy developed to withstand extreme temperatures with the highest possible degree of resistance against distortion, warping, cracking, and wear. The formulation for this alloy is a derivative of technology and materials that were significant in the development of the extreme duty military spec rotors that are manufactured by Wilwood. Every Spec 37 rotor is precision machined to less than .001" run-out, flatness, and parallelism. Combined with the proven GT Series asymmetrical face slot pattern and individual dynamic balancing, you are assured the smoothest, vibration free performance at any speed. These rotors provide the highest cooling capacity and longest service life for extreme braking short tracks and road course competition.

    • Spec-37 Iron
    • 10.4 Pounds
    • Width: 1.21 Inch
    • Diameter: 11.75 Inch
    • Mount Side: LH
    • Vane Count: 48 CV
    • Type: GT
    • Style: GT Slotted
    • Surface Finish: Plain
    • Balanced
    • Suitable for high temperature racing to street use

    Notes:

    Proper Break-In Procedure for Steel or Cast Iron Rotors

    New steel/iron rotors should be bedded in before being used in racing conditions. Proper bedding will prepare the rotor surface, prolong the rotor's life, and make it more

  • AFCO 7250-0300 Basic Rear Disc Brake Kit
    AFCO 7250-0300 Basic Rear Disc Brake Kit
    x
                Kits for metric calipers. These basic kits include brackets, steel vented rotors, hats and bolts. Caliper brackets weld to 3" tube rearend. Hat fits 4-1/2", 4-3/4" and 5" bolt circle. 
            
  • Deluxe Disc Brake Kit 1965-1968 Chevy Full Size Car
    Deluxe Disc Brake Kit 1965-1968 Chevy Full Size Car
    x
                

    These kits allow you to put disc brakes on your full size 1965-68 Chevy cars such as Bel Air, Biscayne, or Impala. Works with most 15" wheels. Kit increases front track width by 11/16" per side and 1-3/8" overall.

    Kit Includes:

    • 11" brake rotor, 5 x 4-3/4"
    • Brake pads
    • GM Caliper slide bolts
    • Rebuilt 1969-1977 calipers (7/16"-20 inlets)
    • Brake brackets
    • Rubber Brake Lines
    • Hardware
    • Seals
    • Outer bearing cones
    • Inner bearing cones
    • Spacers
    • Dust caps

    Instructions (PDF)

     

  • Wilwood 140-10996 FDL 11 Inch Pro Series Front Brake Kit, 1967-72 GM
    Wilwood 140-10996 FDL 11 Inch Pro Series Front Brake Kit, 1967-72 GM
    x
                

    Need a big brake package that can scrub off serious speed and look great doing it?Wilwood's Forged Dynalite Pro-Series Front Hub Kits offer complete disc brake upgrade solutions for traditionaldisc brakespindle applications onclassic Chevymuscle cars. All kits can be used with manual or power boost master cylinders.

    11.00" Pro Series Brakes feature:

    • Forged 4-pistonDynalite Calipers - black finish
    • 11.00" diameter Ultralite HP 30 Vane rotors - plain finish
    • Wilwood BP-10SmartPads - low noise, low dust
    • Lightweight anodized aluminum Pro Street hubs
    • Provides plenty of clearance inside popular 15” wheels.

    All kits include calipers, hubs, rotors, brackets and hardware needed. Brake hoses sold separately.

    835-14010996 Instructions (PDF)

     

  • 1967-1969 Mustang Disc Brake Kit
    1967-1969 Mustang Disc Brake Kit
    x
                

    Replace those outdated and inadequate drum brakes on your Ford Mustang with this complete, easy-to-install disc brake conversion kit. This manual, non-power disc brake kit for 1967-1969 Mustang uses a 5 on 4-1/2" bolt pattern and will fit inside 14" x 7" or larger wheels.

    • Works on 6-cylinder or V8 drum brake spindles
    • Master cylinder will not bolt to stock booster on vehicles with O.E. power drum brakes
    • Fits inside 14" x 7" or larger wheels

    Kit Includes:

    • 43mm 4-Piston Calipers
    • Vented Rotors
    • Pads
    • Mounting Brackets
    • Proportioning Valves
    • Dual Bowl Master Cylinder
    • Flex Hoses
    • Lines
    • Bearings & Seals
    • All hardware included
  • Wilwood 160-13498 HD 48 Curved Vane Spec-37 LH Iron Rotor, 11.75 Inch
    New
    Wilwood 160-13498 HD 48 Curved Vane Spec-37 LH Iron Rotor, 11.75 Inch
    x
                

    Wilwood's HD 48 Curved Vane Spec-37 rotors are are manufactured from a proprietary iron alloy developed to withstand extreme temperatures with the highest possible degree of resistance against distortion, warping, cracking, and wear. The formulation for this alloy is a derivative of technology and materials that were significant in the development of the extreme duty military spec rotors that are manufactured by Wilwood. Every Spec 37 rotor is precision machined to less than .001" run-out, flatness, and parallelism. The HD Series preparation includes full detail machining and smooth pad contact faces without slots.

    • Width: 1.21 Inches
    • Diameter: 11.75 Inches
    • Spec-37 Iron
    • 10.4 Pounds
    • Mount Side: LH
    • Vane Count: 48 CV
    • Style: Plain Face
    • Surface Finish: Plain
    • Type: HD Heavy Duty
    • Suitable for high temperature racing to street use

    Notes:

    Proper Break-In Procedure for Steel or Cast Iron Rotors

    New steel/iron rotors should be bedded in before being used in racing conditions. Proper bedding will prepare the rotor surface, prolong the rotor's life, and make it more resistant to thermal checking or cracking under severe braking conditions. The following procedures should be performed when bedding in both steel and cast iron rotors. It is best

  • Wilwood 140-2118-B Rear Brake Kit - New Big Bearing Ford, 2.5 Offset
    Wilwood 140-2118-B Rear Brake Kit - New Big Bearing Ford, 2.5 Offset
    x
                

    Wilwood FDL Pro-Series rear disc brake kits provide a complete solution for the popular Ford big bearing rear axles on applications where parking brake assemblies are not required. Forged billet Dynalite four piston calipers, two-piece hat and rotor assemblies, and high friction pads provide optimized and balanced braking for all types of customized applications.

    These kits do not have emergency brake provisions.

    835-1402118 Instructions (PDF)

    Axle Flange Identification Chart

  • GM Metric Disc Brake Kit for 910-34921 1955-57 2" Drop Spindles
    GM Metric Disc Brake Kit for 910-34921 1955-57 2" Drop Spindles
    x
                

    Disc brake kit features 10-½” GM vented cast iron rotors and 1978-88 GM metric single piston calipers.

    • 10-1/2" rotors (O.E. on 1979-81 GM Midsize: Malibu, Monte Carlo, Cutlass, Regal, etc.) 
    • 5 x 4-3/4" bolt pattern
    • Rubber Brake Lines
    • 1978-88 GM Metric Calipers
    • 7/16"-20 inlet fitting
    • Includes all hardware: pads, slide bolts, seals, inner & outer wheel bearings, spindle nuts, dust caps

    Spindles sold separately.

    910-31992 Instructions (PDF)

  • 1979-1981 GM Midsize 10 1/2 Inch Disc Brake Rotors
    1979-1981 GM Midsize 10 1/2 Inch Disc Brake Rotors
    x
                We stock those hard-to-find replacement brake rotors for your '79-'81 GM "midsize" cars (Malibu, Monte Carlo, El Camino, Cutlass, Century, Regal, etc.).
            
  • Weld-On 1978-88 GM Flat Mount Caliper Bracket
    Weld-On 1978-88 GM Flat Mount Caliper Bracket
    x
                

    These caliper brackets mount flat and must be welded onto your 3" diameter axle tube. Designed to mount a 1978-1988 GM metric car front caliper for use with an 11.75" diameter rotor. Brackets are 1/4" thick.

    IMCA APPROVED

  • Ford 9 Inch Bolt-On Rear Disc Brake Kit
    Ford 9 Inch Bolt-On Rear Disc Brake Kit
    x
                

    If you don't want to spend an arm and a leg on a rear disc brake kit and still have to weld the bracket on, we've got you covered. This kit includes bolt-on caliper brackets, 11-1/4" vented rotors, '78-'88 GM metric style calipers, brake pads and hardware.

    • Fits both 5 on 4-1/2" and 5 on 4-3/4" bolt circles
    • For Ford passenger car axles ONLY 
    • Fits axle with maximum flange diameter of 6-1/4" O.D.
    • For 15" and larger wheel applications ONLY

    NOTE: This bolt on brake kit is designed to be used on 8" and 9" housings using 3/8" retaining bolts. If you want to use it on a 9" housing with 1/2" bolts, you will need to use the 3/8" hardware to do so. Fits "old" and "new" style big bearing (3.150" bearing O.D.) Ford housings and with axle offsets of a minimum 2-3/8" to 2-1/2".

    Axle Flange Identification Chart (GIF)

    910-31902 Instructions (PDF)

  • Speedway 156 1978-Up GM Metric Brake Pads
    Speedway 156 1978-Up GM Metric Brake Pads
    x
                

    The Speedway 156 brake pad works with aluminum or steel rotors. Best pad for aluminum rotors. Features a low metallic compound for long life and excellent street performance.

    Sold as one pair (PR); outfits one caliper.

    Tech Tip: You can fine tune your car's brake system by selecting different compounds for the front and rear, or side to side.

    Tech Tip:  Only use full metallic pads on coated rotors.

    Brake Pad Brand Guide (Link) 

    Learn how to properly Bed-In your brake pads by reading our tech article.  Bedding-In Brake Pad Procedure.

     

  • 1988-92 Camaro 1LE 12 Inch Brake Rotor
    1988-92 Camaro 1LE 12 Inch Brake Rotor
    x
                

    O.E. for '88-'92 Camaro with 1LE performance package. Has a 5 on 4-3/4" bolt pattern with 7/16" diameter wheel studs. Used as a conversion rotor for '58-'64 Chevy car brake kit 910-31918 for use with 2" drop spindles.

    Note: This rotor has 7/16" wheel studs, NOT the '88-'92 factory-style metric wheel studs.

  • Wilwood 150-8939K BP-10 1969-77 GM Mid-Size Brake Pads
    Wilwood 150-8939K BP-10 1969-77 GM Mid-Size Brake Pads
    x
                

    Speedway Motors is your one-stop shop for GM 1969-77 Midsize caliper brake pads.

    Brake Pad Brochure (PDF)

    Tech Tip:  Only use full metallic pads on coated rotors.

    Sold as a set of 4, 1 set will be needed to outfit 2 calipers.

    Brake Pad Brand Guide (Link) 

    Learn how to properly Bed-In your brake pads by reading our tech article.  Bedding-In Brake Pad Procedure.

  • Wilwood 170-0357 Rear Brake Drag Hat, 1.77 Inch Offset, Multi-5 Lug
    Wilwood 170-0357 Rear Brake Drag Hat, 1.77 Inch Offset, Multi-5 Lug
    x
                

    Willwood brake hats have a long standing reputation for fit, performance, and durability. Manufactured from premium grade aluminum alloys offering high strength and low weight.

    Wilwood Brake Hat Chart (Link)

  • Hawk HB103H.590 Performance 1969-1977 GM HPS Brake Pads
    Hawk HB103H.590 Performance 1969-1977 GM HPS Brake Pads
    x
                

    Get superior stopping power with Hawk Performance! Hawk Performance brake pads have been successful in virtually all forms of motorsports for over 16 years. This success helps Hawk Performance enjoy the benefits of the “Win on Sunday, Sell on Monday,” philosophy. Hawk is one of few brake pad manufacturers that can deliver on the promise, “Race Proven – Street Legal.”

    Increasing the performance of your vehicles braking system is easy when you choose Hawk Performance’s HPS braking compound. This unique Ferro-Carbon formula was developed for street performance using the safety and quality of Motorsports severe-duty friction technology.

    • Higher coefficient of friction over stock brake pads
    • Provides 20-40% more stopping power and higher resistance to brake fade than most standard replacement pads
    • Less fade means a highly durable brake pad with less brake dust

    Upgrade your 1969-77 GM Midsize braking system with these premium pads. Sold as a set of 4, 1 set will be needed to outfit 2 calipers.

    Brake Pad Brand Guide (Link) 

    Learn how to properly Bed-In your brake pads by

Goto Previous PagePrevious Page
1 2 3 4 5 ... 10