Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Muscle Car Headers & Exhaust At Speedway Motors

Speedway Motors has the muscle car headers and mufflers you need, at a price you can afford. Check out our huge inventory of chassis headers, LS1 swap headers and tight-fit block hugger headers, all available with durable ceramic AHC coating, polished, or stainless steel. Don't forget about our cast iron exhaust manifolds and dual exhaust kits as well. With an awesome selection of high performance Flowmaster mufflers, exhaust wrap, glasspacks, and exhaust tips, Speedway can help you get the roar you want from your muscle car without the roar from your wife for spending too much money!

"Muscle Car, Clamps" Page 1 of 2

  • Stainless Steel Exhaust/Muffler Tube Clamps
    Stainless Steel Exhaust/Muffler Tube Clamps
    x
                

    These superior quality muffler tube clamps/u-bolts are 100% stainless steel. They are ideal for any exhaust system and feature a saddle-type clamp for added strength. Choose plain or polished. Choose from 1-1/2", 1-5/8", 1-3/4", 1-7/8", 2", 2-1/8", 2-1/4", and 2-1/2" sizes available. Thread size on tube clamps is 8mm-1.25.

    • Stainless steel
    • Ideal for any exhaust system 
    • Saddle-type clamp for added strength
    • Thread size on clamps is 8mm-1.25
    • Choose plain or polished
    • Choose from 1-1/2", 1-5/8", 1-3/4", 1-7/8", 2", 2-1/8", 2-1/4", and 2-1/2" pipe diameter
  • DEi 010127 Titanium Exhaust Wrap, 2 Inch x 50 Ft Roll
    DEi 010127 Titanium Exhaust Wrap, 2 Inch x 50 Ft Roll
    x
                

    This exhaust wrap by Design Engineering, Inc. is made from pulverized lava rock and can stand 1800 degrees directly or 2500 degrees indirectly. Perfect for those extreme conditions and you don't need to use any spray-on coatings with it. Resists abrasion for longer life.

    • Constructed from pulverized lava rock - titanium-like strength and toughness
    • Reduces underhood temps resulting in cooler air intake for improved performance 
    • Able to handle 25% more heat than conventional wrap
    • Capable of handling more heat than any other wrap found in the market today
    • It’s pliable - no need to wet the wrap when wrapping tubing
    • Will not shrink
    • More resistant to temperature/vibration break-down, abrasions, chemical and hot oil spills
    • Very cool carbon fiber look

    Works best on Stainless Steel headers.

    Instruction Sheet (PDF)

    Frequently Asked Questions (PDF)

  • Thermo Tec 13101 Snap Strap
    $29.99
    Product Rating: 2.50 Stars
    Thermo Tec 13101 Snap Strap
    x
                

    Snap strap stainless steel tie wraps. Enough to install wrap on two headers.  V-8 kit contains eight 9" straps and four 18" straps.

  • Speedway Header and Exhaust Wrap, 2 Inch x 50 Ft, Black Color
    Speedway Header and Exhaust Wrap, 2 Inch x 50 Ft, Black Color
    x
                

    If your exhaust runs too close to your brake lines, master cylinder, steering box or even the body, you will cook that item. This easy to use wrap will protect your investment. 

    • Retains exhaust heat within the tube for increased flow and horsepower
    • Reduced underhood temperatures
    • Protects surronding components from excessive heat
    • Made from a durable, specially treated woven glass fiber material

    For a Small Block V8 engine, you will need approximately (2) 2" x 50' rolls. Big Blocks and 180° style headers may require one additional 2" x 50' roll.

  • DEi 010129 Titanium Exhaust Wrap, 2 Inch x 15 Ft Roll
    DEi 010129 Titanium Exhaust Wrap, 2 Inch x 15 Ft Roll
    x
                

    This exhaust wrap by Design Engineering, Inc. is made from pulverized lava rock and can stand 1800 degrees directly or 2500 degrees indirectly. Perfect for those extreme conditions and you don't need to use any spray-on coatings with it. Resists abrasion for longer life.

    Works best on Stainless Steel headers.

    • Constructed from pulverized lava rock - titanium-like strength and toughness
    • Reduces underhood temps resulting in cooler air intake for improved performance 
    • Able to handle 25% more heat than conventional wrap
    • Capable of handling more heat than any other wrap found in the market today
    • It’s pliable - no need to wet the wrap when wrapping tubing
    • Will not shrink
    • More resistant to temperature/vibration break-down, abrasions, chemical and hot oil spills
    • Very cool carbon fiber look

    Instruction Sheet (PDF)

    Frequently Asked Questions (PDF)

  • DEi 010201 8 Inch Stainless Steel Locking Ties, 8 Pack
    DEi 010201 8 Inch Stainless Steel Locking Ties, 8 Pack
    x
                

    These locking ties are designed to secure DEi's exhaust wrap but the uses are endless. Made of high grade stainless steel they will withstand temperatures in excess of 2500 degrees and have a tensile strength over 100 lbs. These locking ties will provide a finished look to any job quickly and easily. 

  • Speedway Header and Exhaust Wrap, 1 Inch x 50 Ft, Black Color
    Speedway Header and Exhaust Wrap, 1 Inch x 50 Ft, Black Color
    x
                

    If your exhaust runs too close to your brake lines, master cylinder, steering box or even the body, you will cook that item. This easy to use wrap will protect your investment. 

    • Retains exhaust heat within the tube for increased flow and horsepower
    • Reduced underhood temperatures
    • Protects surronding components from excessive heat
    • Made from a durable, specially treated woven glass fiber material

    For a Small Block V8 engine, you will need approximately (2) 2" x 50' rolls. Big Blocks and 180° style headers may require one additional 2" x 50' roll.

  • Dynatech   794-91225 V-Clamp Collar Assembly Kit, 2-1/2 Inch
    Dynatech 794-91225 V-Clamp Collar Assembly Kit, 2-1/2 Inch
    x
                Kit includes two weld-on mild steel V-clamp rings and a stainless steel V-band clamp. Works great for header to muffler connections.
            
  • Speedway Header and Exhaust Wrap, 2 Inch x 100 Ft, Black Color
    Speedway Header and Exhaust Wrap, 2 Inch x 100 Ft, Black Color
    x
                

    If your exhaust runs too close to your brake lines, master cylinder, steering box or even the body, you will cook that item. This easy to use wrap will protect your investment. 

    • Retains exhaust heat within the tube for increased flow and horsepower
    • Reduced underhood temperatures
    • Protects surronding components from excessive heat
    • Made from a durable, specially treated woven glass fiber material

    For a Small Block V8 engine, you will need approximately (2) 2" x 50' rolls. Big Blocks and 180° style headers may require one additional 2" x 50' roll.

  • Speedway Header and Exhaust Wrap, 1 Inch x 100 Ft, Black Color
    Speedway Header and Exhaust Wrap, 1 Inch x 100 Ft, Black Color
    x
                

    If your exhaust runs too close to your brake lines, master cylinder, steering box or even the body, you will cook that item. This easy to use wrap will protect your investment. 

    • Retains exhaust heat within the tube for increased flow and horsepower
    • Reduced underhood temperatures
    • Protects surronding components from excessive heat
    • Made from a durable, specially treated woven glass fiber material

    For a Small Block V8 engine, you will need approximately (2) 2" x 50' rolls. Big Blocks and 180° style headers may require one additional 2" x 50' roll.

  • Thermo Tec 11003 Header Wrap, 2 Inch x 100 Ft, White Color
    Thermo Tec 11003 Header Wrap, 2 Inch x 100 Ft, White Color
    x
                

    Thermo-Tec® header wrap keeps heat in the exhaust stream.  This increases exhaust velocity and engine efficiency, as well as reducing  under-hood temperature up to 70%.  Available in three different roll sizes.

    Please consider the Snap Strap Kit For V-8 and the Hi-Heat Coating when using this product.

    Typical Small Block Chevy Headers Need:

    • (2)  704-11002/11022 Wraps
    • (1)  704-13101 Strap Kit
    • (2)  70412001 High Heat Coatings

    Typical Big Block Chevy and 180 Degree Headers Need:

    • (2-3)  704-11002/11022 Wraps
    • (1)     704-13101 Strap Kit
    • (2-3)  704-12001 High Heat Coatings
  • Thermo Tec 11021 Header Wrap, 1 Inch x 50 Ft, Black Color
    Thermo Tec 11021 Header Wrap, 1 Inch x 50 Ft, Black Color
    x
                

    Thermo-Tec® header wrap keeps heat in the exhaust stream.  This increases exhaust velocity and engine efficiency, as well as reducing  under-hood temperature up to 70%.  Available in three different roll sizes.

    Installation Instructions (PDF)

    Typical Small Block Chevy Headers Need:

    • (2)  704-11002/11022 Wraps
    • (1)  704-13101 Strap Kit
    • (2)  70412001 High Heat Coatings

    Typical Big Block Chevy and 180 Degree Headers Need:

    • (2-3)  704-11002/11022 Wraps
    • (1)     704-13101 Strap Kit
    • (2-3)  704-12001 High Heat Coatings

     

  • Speedway Header and Exhaust Wrap, 1 Inch x 100 Ft, Titanium Color
    Speedway Header and Exhaust Wrap, 1 Inch x 100 Ft, Titanium Color
    x
                

    If your exhaust runs too close to your brake lines, master cylinder, steering box or even the body, you will cook that item. This easy to use wrap will protect your investment. 

    • Retains exhaust heat within the tube for increased flow and horsepower
    • Reduced underhood temperatures
    • Protects surronding components from excessive heat
    • Made from a durable, specially treated woven glass fiber material

    For a Small Block V8 engine, you will need approximately (2) 2" x 50' rolls. Big Blocks and 180° style headers may require one additional 2" x 50' roll.

  • Speedway Header and Exhaust Wrap, 1 Inch x 50 Ft, Titanium Color
    Speedway Header and Exhaust Wrap, 1 Inch x 50 Ft, Titanium Color
    x
                

    If your exhaust runs too close to your brake lines, master cylinder, steering box or even the body, you will cook that item. This easy to use wrap will protect your investment. 

    • Retains exhaust heat within the tube for increased flow and horsepower
    • Reduced underhood temperatures
    • Protects surronding components from excessive heat
    • Made from a durable, specially treated woven glass fiber material

    For a Small Block V8 engine, you will need approximately (2) 2" x 50' rolls. Big Blocks and 180° style headers may require one additional 2" x 50' roll.

  • Speedway Header and Exhaust Wrap, 1 Inch x 100 Ft, White Color
    Speedway Header and Exhaust Wrap, 1 Inch x 100 Ft, White Color
    x
                

    If your exhaust runs too close to your brake lines, master cylinder, steering box or even the body, you will cook that item. This easy to use wrap will protect your investment. 

    • Retains exhaust heat within the tube for increased flow and horsepower
    • Reduced underhood temperatures
    • Protects surronding components from excessive heat
    • Made from a durable, specially treated woven glass fiber material

    For a Small Block V8 engine, you will need approximately (2) 2" x 50' rolls. Big Blocks and 180° style headers may require one additional 2" x 50' roll.

  • Speedway Header and Exhaust Wrap, 2 Inch x 100 Ft, Titanium Color
    Speedway Header and Exhaust Wrap, 2 Inch x 100 Ft, Titanium Color
    x
                

    If your exhaust runs too close to your brake lines, master cylinder, steering box or even the body, you will cook that item. This easy to use wrap will protect your investment. 

    • Retains exhaust heat within the tube for increased flow and horsepower
    • Reduced underhood temperatures
    • Protects surronding components from excessive heat
    • Made from a durable, specially treated woven glass fiber material

    For a Small Block V8 engine, you will need approximately (2) 2" x 50' rolls. Big Blocks and 180° style headers may require one additional 2" x 50' roll.

  • DEi 010123 Exhaust Pipe Wrap and Locking Ties Kit, 2 Inch x 25 Ft, Titan
    DEi 010123 Exhaust Pipe Wrap and Locking Ties Kit, 2 Inch x 25 Ft, Titan
    x
                DEI Pipe Wrap is used in many types of  applications for reducing  unwanted and harmful heat under the hood and  from entering the driver  compartment while improving horsepower. 

    Pipe wrap improves performance and can be used on everyday vehicles, motorcycles, street rods, muscle cars, SUV's, RV's, heavy duty truck & tow vehicles, as well as in many non-automotive applications.

    Wrapping uses include:

    • Header tubes to protect plug wires
    • Downpipes to improve velocity
    • Sections of exhaust & tail pipe to reduce heat from entering vehicle interior
    • Protect under hood components from direct heat
    • Prevent burns from HOT motorcycle pipes
    • Strategically wrap sections of pipe to block heat from entering vehicle
    • Everything needed in one easy-to-install kit
    • Titanium wrap withstands heat up to 1800°F (980°C)
    • 25 foot roll of pipe wrap
    • Locking ties made of 304 stainless steel

    Kit includes one roll of 2" x 25' exhaust wrap & four 8" stainless steel locking ties to secure wrap.

  • Speedway Header and Exhaust Wrap, 2 Inch x 100 Ft, White Color
    Speedway Header and Exhaust Wrap, 2 Inch x 100 Ft, White Color
    x
                

    If your exhaust runs too close to your brake lines, master cylinder, steering box or even the body, you will cook that item. This easy to use wrap will protect your investment. 

    • Retains exhaust heat within the tube for increased flow and horsepower
    • Reduced underhood temperatures
    • Protects surronding components from excessive heat
    • Made from a durable, specially treated woven glass fiber material

    For a Small Block V8 engine, you will need approximately (2) 2" x 50' rolls. Big Blocks and 180° style headers may require one additional 2" x 50' roll.

  • DEi 010330 Motorcycle Exhaust Pipe Wrap Kit, Black
    DEi 010330 Motorcycle Exhaust Pipe Wrap Kit, Black
    x
                

    A simple and effective way to control heat, protect against serious leg burns and improve performance. Pipe wrap kits contain everything needed to wrap a set of pipes all in one convenient package.

    Each kit includes two 2" x 15 foot rolls of Black exhaust wrap, eight 8" & four 14" stainless steel Locking Ties to secure wrap and Black HT Silicone Coating spray that penetrates, seals, protects and preserves wrap.

    A proprietary coating is applied to all DEI wrap to act as a bonding agent and to increase durability levels under extreme heat.

    • Prevent burns
    • Improve exhaust flow for better performance
    • Offers a custom style
    • Increase horsepower!
    • Asbestos free & easy to install
    • Significant cost savings by bundling as a kit
    • Withstands direct continuous heat up to 1200°F
    • Protects against abrasions, hot oil spills, road grime and more!

    35610330 Pipe Wrap Instructions (PDF)

    Exhaust Wrap Frequently Asked Questions (PDF) 

  • Thermo Tec 11001 Header Wrap, 1 Inch x 50 Ft, White Color
    Thermo Tec 11001 Header Wrap, 1 Inch x 50 Ft, White Color
    x
                

    Thermo-Tec® header wrap keeps heat in the exhaust stream.  This increases exhaust velocity and engine efficiency, as well as reducing  under-hood temperature up to 70%.  Available in three different roll sizes.

    Please consider the Snap Strap Kit For V-8 and the Hi-Heat Coating when using this product.

    Typical Small Block Chevy Headers Need:

    • (2)  704-11002/11022 Wraps
    • (1)  704-13101 Strap Kit
    • (2)  70412001 High Heat Coatings

    Typical Big Block Chevy and 180 Degree Headers Need:

    • (2-3)  704-11002/11022 Wraps
    • (1)     704-13101 Strap Kit
    • (2-3)  704-12001 High Heat Coatings
  • Dynatech   60-905001 Tube Clamp Collar Kit, 5 Inch
    Dynatech 60-905001 Tube Clamp Collar Kit, 5 Inch
    x
                These are like the U-tab kits except one half is a clamp collar. They allow easy removal without welding a tab on the pipe. 
            
  • HushMat 40100 Ultra H-2-O Damping and Sealing Paste
    HushMat 40100 Ultra H-2-O Damping and Sealing Paste
    x
                

    HushMat Ultra H-2-O is a water based formula that is designed to maintain flexibility when cured. Ultra H-2-O is perfect for damping trunk lids, hard to reach areas and for sealing floor pan seams between welds. HushMat Ultra H-2-O is water based so it cleans up with a damp rag. Each HushMat Ultra H-2-O tube comes with a custom designed, flat “EZ Squeeze” nozzle that can be cleaned out with water and re-used. HushMat Ultra H-2-O is:

    • Paintable and sandable when cured
    • Cures in 3 hours or less
    • One Part Water Based formula
    • No Ventilation, tools or other application equipment required
    • Outperforms spray damping materials by over 10 times

    HushMat Ultra H-2-O is great for damping those hard to reach areas inside the door frame and rear quarter panels and for sealing body panels and enclosures. HushMat Ultra H-2-O’s chemistry allows for adhesion to sheet metal, wood and fiberglass surfaces and maintains flexibility when cured.

    See the GoodGuys Article.

    910-80518 Details (PDF)

  • Dynatech   789-70275 Stepped Band Tube Clamp, 2-3/4 Inch
    Dynatech 789-70275 Stepped Band Tube Clamp, 2-3/4 Inch
    x
                

    Smooth transition taper allows proper fit to seal expanded slip-fit connections. Great for muffler, tailpipe, merge pipe connections.

    One tube clamp per package.

  • Dynatech   789-70300 Stepped Band Tube Clamp, 3 Inch
    Dynatech 789-70300 Stepped Band Tube Clamp, 3 Inch
    x
                

    Smooth transition taper allows proper fit to seal expanded slip-fit connections. Great for muffler, tailpipe, merge pipe connections.

    One clamp per package.

  • Speedway Header and Exhaust Wrap, 1 Inch x 50 Ft, White Color
    Speedway Header and Exhaust Wrap, 1 Inch x 50 Ft, White Color
    x
                

    If your exhaust runs too close to your brake lines, master cylinder, steering box or even the body, you will cook that item. This easy to use wrap will protect your investment. 

    • Retains exhaust heat within the tube for increased flow and horsepower
    • Reduced underhood temperatures
    • Protects surronding components from excessive heat
    • Made from a durable, specially treated woven glass fiber material

    For a Small Block V8 engine, you will need approximately (2) 2" x 50' rolls. Big Blocks and 180° style headers may require one additional 2" x 50' roll.

  • DEi 010128 Titanium Exhaust Wrap, 1 Inch x 15 Ft Roll
    DEi 010128 Titanium Exhaust Wrap, 1 Inch x 15 Ft Roll
    x
                

    This exhaust wrap by Design Engineering, Inc. is made from pulverized lava rock and can stand 1800 degrees directly or 2500 degrees indirectly. Perfect for those extreme conditions and you don't need to use any spray-on coatings with it. Resists abrasion for longer life.

    Works best on Stainless Steel headers.

    • Constructed from pulverized lava rock - titanium-like strength and toughness
    • Reduces underhood temps resulting in cooler air intake for improved performance 
    • Able to handle 25% more heat than conventional wrap
    • Capable of handling more heat than any other wrap found in the market today
    • It’s pliable - no need to wet the wrap when wrapping tubing
    • Will not shrink
    • More resistant to temperature/vibration break-down, abrasions, chemical and hot oil spills
    • Very cool carbon fiber look

    Instruction Sheet (PDF)

    Frequently Asked Questions (PDF)

  • Speedway Header and Exhaust Wrap, 2 Inch x 50 Ft, White Color
    Speedway Header and Exhaust Wrap, 2 Inch x 50 Ft, White Color
    x
                

    If your exhaust runs too close to your brake lines, master cylinder, steering box or even the body, you will cook that item. This easy to use wrap will protect your investment. 

    • Retains exhaust heat within the tube for increased flow and horsepower
    • Reduced underhood temperatures
    • Protects surronding components from excessive heat
    • Made from a durable, specially treated woven glass fiber material

    For a Small Block V8 engine, you will need approximately (2) 2" x 50' rolls. Big Blocks and 180° style headers may require one additional 2" x 50' roll.

  • Thermo Tec 11002 Header Wrap, 2 Inch x 50 Ft, White Color
    Thermo Tec 11002 Header Wrap, 2 Inch x 50 Ft, White Color
    x
                

    Thermo-Tec® header wrap keeps heat in the exhaust stream.  This increases exhaust velocity and engine efficiency, as well as reducing  under-hood temperature up to 70%.  Available in three different roll sizes.

    Please consider the Snap Strap Kit For V-8 and the Hi-Heat Coating when using this product.

    Typical Small Block Chevy Headers Need:

    • (2)  704-11002/11022 Wraps
    • (1)  704-13101 Strap Kit
    • (2)  70412001 High Heat Coatings

    Typical Big Block Chevy and 180 Degree Headers Need:

    • (2-3)  704-11002/11022 Wraps
    • (1)     704-13101 Strap Kit
    • (2-3)  704-12001 High Heat Coatings
  • Dynatech   789-70250 Stepped Band Tube Clamp, 2-1/2 Inch
    Dynatech 789-70250 Stepped Band Tube Clamp, 2-1/2 Inch
    x
                

    Smooth transition taper allows proper fit to seal expanded slip-fit connections. Great for muffler, tailpipe, merge pipe connections.

    One clamp per package.

  • Thermo Tec 11022 Header Wrap, 2 Inch x 50 Ft, Black Color
    Thermo Tec 11022 Header Wrap, 2 Inch x 50 Ft, Black Color
    x
                

    Thermo-Tec® header wrap keeps heat in the exhaust stream.  This increases exhaust velocity and engine efficiency, as well as reducing  under-hood temperature up to 70%.  Available in three different roll sizes.

    Installation Instructions (PDF)

    Typical Small Block Chevy Headers Need:

    • (2)  704-11002/11022 Wraps
    • (1)  704-13101 Strap Kit
    • (2)  70412001 High Heat Coatings

    Typical Big Block Chevy and 180 Degree Headers Need:

    • (2-3)  704-11002/11022 Wraps
    • (1)     704-13101 Strap Kit
    • (2-3)  704-12001 High Heat Coatings

     

  • Dynatech   789-70350 Stepped Band Tube Clamp, 3-1/2 Inch
    Dynatech 789-70350 Stepped Band Tube Clamp, 3-1/2 Inch
    x
                

    Smooth transition taper allows proper fit to seal expanded slip-fit connections. Great for muffler, tailpipe, merge pipe connections.

    One clamp per package.

  • Speedway Header and Exhaust Wrap, 2 Inch x 50 Ft, Titanium Color
    Speedway Header and Exhaust Wrap, 2 Inch x 50 Ft, Titanium Color
    x
                

    If your exhaust runs too close to your brake lines, master cylinder, steering box or even the body, you will cook that item. This easy to use wrap will protect your investment. 

    • Retains exhaust heat within the tube for increased flow and horsepower
    • Reduced underhood temperatures
    • Protects surronding components from excessive heat
    • Made from a durable, specially treated woven glass fiber material

    For a Small Block V8 engine, you will need approximately (2) 2" x 50' rolls. Big Blocks and 180° style headers may require one additional 2" x 50' roll.

  • Dynatech   60-904001 Tube Clamp Collar Kit, 4 Inch
    Dynatech 60-904001 Tube Clamp Collar Kit, 4 Inch
    x
                These are like the U-tab kits except one half is a clamp collar. They allow easy removal without welding a tab on the pipe. 
            
  • Dynatech   794-91235 V-Clamp Collar Assembly Kit, 3-1/2 Inch
    Dynatech 794-91235 V-Clamp Collar Assembly Kit, 3-1/2 Inch
    x
                Kit includes two weld-on mild steel V-clamp rings and a stainless steel V-band clamp. Works great for header to muffler connections.
            
  • Dynatech   794-91230 V-Clamp Collar Assembly Kit, 3 Inch
    Dynatech 794-91230 V-Clamp Collar Assembly Kit, 3 Inch
    x
                Kit includes two weld-on mild steel V-clamp rings and a stainless steel V-band clamp. Works great for header to muffler connections.
            
  • DEi 010119 Exhaust Pipe Wrap and Locking Ties Kit, 2 Inch x 25 Ft, Black
    DEi 010119 Exhaust Pipe Wrap and Locking Ties Kit, 2 Inch x 25 Ft, Black
    x
                DEI Pipe Wrap is used in many types of  applications for reducing unwanted and harmful heat under the hood and  from entering the driver compartment while improving horsepower. 

    Pipe wrap improves performance and can be used on everyday vehicles, motorcycles, street rods, muscle cars, SUV's, RV's, heavy duty truck & tow vehicles, as well as in many non-automotive applications.

    Wrapping uses include:

    • Header tubes to protect plug wires
    • Downpipes to improve velocity
    • Sections of exhaust & tail pipe to reduce heat from entering vehicle interior
    • Protect under hood components from direct heat
    • Prevent burns from HOT motorcycle pipes
    • Strategically wrap sections of pipe to block heat from entering vehicle
    • Everything needed in one easy-to-install kit
    • Titanium wrap withstands heat up to 1800°F (980°C)
    • 25 foot roll of pipe wrap
    • Locking ties made of 304 stainless steel

    Kit includes one roll of 2" x 25' exhaust wrap & four 8" stainless steel locking ties to secure wrap.

  • HushMat 30300 Quiet Tape Kit
    $19.99
    HushMat 30300 Quiet Tape Kit
    x
                Please view the product's page for more information
            
  • DEi 010202 14 Inch Stainless Steel Locking Ties, 4 Pack
    DEi 010202 14 Inch Stainless Steel Locking Ties, 4 Pack
    x
                

    These locking ties are designed to secure DEi's exhaust wrap but the uses are endless. Made of high grade stainless steel they will withstand temperatures in excess of 2500 degrees and have a tensile strength over 100 lbs. These locking ties will provide a finished look to any job quickly and easily. 

  • DEi 010126 Titanium Exhaust Wrap, 1 Inch x 50 Ft Roll
    DEi 010126 Titanium Exhaust Wrap, 1 Inch x 50 Ft Roll
    x
                

    This exhaust wrap by Design Engineering, Inc. is made from pulverized lava rock and can stand 1800 degrees directly or 2500 degrees indirectly. Perfect for those extreme conditions and you don't need to use any spray-on coatings with it. Resists abrasion for longer life.

    • Constructed from pulverized lava rock - titanium-like strength and toughness
    • Reduces underhood temps resulting in cooler air intake for improved performance 
    • Able to handle 25% more heat than conventional wrap
    • Capable of handling more heat than any other wrap found in the market today
    • It’s pliable - no need to wet the wrap when wrapping tubing
    • Will not shrink
    • More resistant to temperature/vibration break-down, abrasions, chemical and hot oil spills
    • Very cool carbon fiber look

    Works best on Stainless Steel headers.

    Instruction Sheet (PDF)

    Frequently Asked Questions (PDF)

  • Garage Sale - Dynatech 789-70250 Stepped Band Tube Clamp, 2-1/2 Inch
    Garage Sale
    Garage Sale - Dynatech 789-70250 Stepped Band Tube Clamp, 2-1/2 Inch
    x
                

    Smooth transition taper allows proper fit to seal expanded slip-fit connections. Great for muffler, tailpipe, merge pipe connections.

    One clamp per package.

     

    This clamp is garage sale priced because it is missing the hardware and it is dented, what you see is what you get.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

Goto Previous PagePrevious Page
1 2