Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products

Speedway Motors is the #1 authority on disc brakes conversion kits. With the most experience in the American muscle car business, you can be assured that you are getting a quality and precise fitting kit. Insist on a Speedway front disc brake conversion kit for your classic Chevy, Ford or Mopar muscle car. Don't forget to check out our huge selection of dropped spindles, master cylinders, flaring tools and proportioning valves. Stock up on all the essential brake lines, brake rotors, brake pads and fittings, too!

"Muscle Car, Brake Pedal" Page 1 of 1

  • Wilwood 340-1290 Forward Swing Mount Single Master Cylinder Pedal
    Wilwood 340-1290 Forward Swing Mount Single Master Cylinder Pedal
    x
                

    This pedal is often used as a clutch pedal with a single outlet master cylinder, or as a brake pedal in conjunction with dual outlet, tandem master cylinders on four wheel brake equipped vehicles. The pedal features all aluminum frame and arm construction with steel pivots, mounting studs, and an anti-skid pedal pad.

    Swing mount has a 7.00 to 1 pedal ratio.

    Pedal Dimensions (Link)

    Detailed Schematic of Pedal 

  • Threaded Steel Weld Bung Fitting, 1/4 Inch NPT Female
    Threaded Steel Weld Bung Fitting, 1/4 Inch NPT Female
    x
                

    We offer these premium-quality weld-in bungs for a variety of uses. They're CNC-machined from steel and are great for oil or fuel tanks, radiators, valve covers, manifolds, and rear axle housings.

    Female weld bung fittings available in steel.  1/4 Inch NPT works well with rubber round pedal pad (part number 91031200) to mount pedal stud. 

    Threaded Steel Weld Bung Fitting

    • 1/4 Inch NPT

    Fitting Thread Application Chart (GIF)

     

  • Wilwood 340-1289 Floor Mount Clutch Pedal
    Wilwood 340-1289 Floor Mount Clutch Pedal
    x
                This pedal can be used for either a hydraulic clutch release or brake master cylinder when used with Wilwood's tandem feed master cylinder and adapter kit. 
    • 6:1 pedal ratio
    • All aluminum frame and arm with steel pivots
    • Anti-skid pedal pad
    • Mounting flange is a vertical pattern on a 2-1/4" on center

    835-3401289 Dimensions (Link)

  • Lokar SG-6017 X-Large Steel Brake Pedal Pad w/Rubber Inserts, Chromed
    Lokar SG-6017 X-Large Steel Brake Pedal Pad w/Rubber Inserts, Chromed
    x
                

    Lokar's chrome steel brake pedal cover is EXTRA LARGE for those seeking more substance under foot.  The brake pedal pads mount with a 1/2 - 20 stud built into the back of the pad.

    • Chrome finish
    • Designed after OEM pedals
    • EXTRA LARGE for those seeking more substance under foot
    • Mount with a 1/2 - 20 stud built into the back of the pad
    • 3-3/4" x 2-3/4"

    Brake and Clutch Pedal Pad Installation Instructions (PDF)

  • Lokar BAG-6121 1964-1970 Mustang Billet Aluminum Clutch and Brake Pad
    Lokar BAG-6121 1964-1970 Mustang Billet Aluminum Clutch and Brake Pad
    x
                • 6061-T6 Aluminum
    • CNC machined for looks and durability
    • Direct replacement for stock assemblies
    • Spring-loaded Throttle Pedal
    • Delrin bushings for smooth pedal movement
    • Rubber inserts on all pads for traction
    • 3M black adhesive included for installing rubber inserts
    • Easy to install with basic hand tools
    • For Manual Transmissions Only
  • 1933-1934 Ford Frame Master Cylinder & Frame Rail Mount
    1933-1934 Ford Frame Master Cylinder & Frame Rail Mount
    x
                

    The ideal combination for a clean and simple 1933-1934 Ford. The master cylinder has been remanufactured and is suitable for 4-wheel disc or disc/drum brake setups. The bracket can be bolted or welded to the left frame rail (boxed or stock).

    Kit includes a dual feed master cylinder, frame bracket, steel pedal arm that can be easily modified for driver comfort and hardware.

    916-31933 Instructions (pdf) 

    Brake System Builder's Tip (Link)

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.  

  • Lokar BAG-6094 67-69 Camaro/Firebird Automatic Brake Pedal Pad, Rubber
    Lokar BAG-6094 67-69 Camaro/Firebird Automatic Brake Pedal Pad, Rubber
    x
                

    Billet aluminum brake and clutch pedal covers are designed to match the throttle pedal assemblies and are machined to fit over the stock steel pads with Lokar's exclusive mounting design, no drilling is needed and installation is simple. Traditional brake pedal covers are available with rubber inserts and a brushed finish.

    • Billet aluminum
    • Machined to fit over the stock steel brake pedal pads
    • No drilling is needed
    • Quick and easy installation
    • Rubber inserts
    • Brushed finish

    4916094 Installation Instructions (PDF)

  • Lokar BAG-6163 64-75 Chevelle Curved Billet Aluminum E-Brake Pedal Pad
    Lokar BAG-6163 64-75 Chevelle Curved Billet Aluminum E-Brake Pedal Pad
    x
                

    For a compact and clean look, Lokar has put a modern bend on classic brake/clutch pedal pads. These curved brake/clutch pedal covers add style and function to your classic car. Designed with hidden screws, these brake pedal pads are curved to match and bolt directly to the factory steel brake/clutch pedal. Each brake/clutch pedal cover has been fashioned after its corresponding factory rubber pad and is available in a brushed finish.

    • Direct replacement
    • Billet aluminum
    • Machined to fit over the stock steel pads
    • No drilling is needed
    • Quick and easy installation
    • Rubber inserts
    • Brushed finish

    E-Brake Pedal Pad Installation Instructions (PDF)

  • Lokar BFG-6013 Billet Aluminum XL Series Brake Pedal Pad w/Rubber
    New
    Lokar BFG-6013 Billet Aluminum XL Series Brake Pedal Pad w/Rubber
    x
                Lokar's billet aluminum brake pedal cover is EXTRA LARGE for those  seeking  more substance under foot.  These brake pedal pads mount with  a 1/2 - 20  stud built into the back of the pad. 
    • XL Series Pad Size, measures 3-3/4" wide x 2-3/4" tall
    • Rubber Insert Design Pad
    • Brushed Aluminum Finish

    Brake and Clutch Pedal Pad Installation Instructions (PDF)

  • Lokar BAG-6137 55-57 Chevy Curved Power Billet Alum Brake Pedal Pad
    Lokar BAG-6137 55-57 Chevy Curved Power Billet Alum Brake Pedal Pad
    x
                

    For a compact and clean look, Lokar has put a modern bend on classic brake pedal pads. These curved brake/clutch pedal covers add style and function to your classic car. Designed with hidden screws, these pads are curved and pocketed to match and bolt directly to the factory steel brake pedal. Each brake pedal cover has been fashioned after its corresponding factory rubber pad and is available in a brushed finish.

    • Billet aluminum
    • Machined to fit over the stock steel pads
    • Quick and easy installation
    • Rubber inserts
    • Brushed finish

    4916137 Installation Instructions (PDF)

  • Lokar BAG-6152 Lakester Steel Brake/Clutch Pedal Pad, Chromed
    Lokar BAG-6152 Lakester Steel Brake/Clutch Pedal Pad, Chromed
    x
                

    Lakester hot rod pedal styling is a continuation of the many nostalgic products offered at Lokar. The brake pedal covers have the same quality you have come to expect from its sister steel spoon throttle pedal and round brake/clutch pedal pad. Lakester pedals feature curved pads and arms.

    These new nostalgic style pedals are available in a chromed finish. This unique pedal design will give your favorite vehicle an all new look.

    • Hot rod styling
    • Chrome finish
    • Quality steel construction
    • Quick and easy installation
    • 2" x 3-1/2"

    4916152 Installation Instructions (PDF)

     

  • Lokar BAG-6133 67-69 Camaro/Firebird Clutch and Manual Brake Pedal Pad
    Lokar BAG-6133 67-69 Camaro/Firebird Clutch and Manual Brake Pedal Pad
    x
                These billet aluminum pedal pads are the perfect finishing touch for your dream car. The pedal pads attach to your existing manual brake and clutch pedals. 
            
  • Lokar SPO-6071 Chrome Round Steel Brake/Clutch Pedal Pad with Rubber
    Lokar SPO-6071 Chrome Round Steel Brake/Clutch Pedal Pad with Rubber
    x
                

    Lokar's steel round 3" brake/clutch pedal pad is equipped with rubber inserts to complete the ensemble. The brake/clutch pedal cover is available in a chromed finish.

    • Nostalgic hot rod style
    • Equipped with rubber inserts 
    • Chrome finish
    • 3" Round

    Steel Brake/Clutch Pedal Pad Installation Instructions (PDF)

  • Universal Under Dash 90 Degree Pedal Assembly
    Universal Under Dash 90 Degree Pedal Assembly
    x
                
    • Universal right angle bracket
    • Converts front to back pedal motion into left to right
    • Accepts our 7" boosters
  • Lokar BAG-6102 67-69 Camaro/Firebird Brake/Clutch Pedal Pad w/Rubber
    Lokar BAG-6102 67-69 Camaro/Firebird Brake/Clutch Pedal Pad w/Rubber
    x
                

    Billet aluminum brake and clutch pads are designed to match the throttle pedal assemblies and are machined to fit over the stock steel pads with Lokar's exclusive mounting design, no drilling is needed and installation is simple. Traditional pads are available with rubber inserts and a brushed finish.

    • Billet aluminum
    • Machined to fit over the stock steel pads
    • No drilling is needed
    • Quick and easy installation
    • Rubber inserts
    • Brushed finish

    4916102 Installation Instructions (PDF)

     

  • Lokar BAG-6080 1955-57 Chevy Billet Non-Power Brake Pedal Pad
    Lokar BAG-6080 1955-57 Chevy Billet Non-Power Brake Pedal Pad
    x
                

    These brake pedal covers go over your 1955-57 Chevy non-power brake pedals and are retained by 4 allen head button bolts that screw into the back side.

    Outside measurement of 6" x 2-3/4" fits 3-1/4" x 1-5/8" original steel pedal.

  • Lokar XBFG-6013 XL Series Billet Aluminum Brake Pedal Pad w/Rubber
    Lokar XBFG-6013 XL Series Billet Aluminum Brake Pedal Pad w/Rubber
    x
                

    Billet aluminum brake pedal covers are designed to match the throttle pedal assemblies and are machined to fit over the stock steel pads with Lokar's exclusive mounting design, no drilling is needed and installation is simple. Traditional brake pedal pads are available with rubber inserts and a brushed finish. Lokar's billet aluminum brake pedal cover is designed with a 1/2 - 20 thread and includes a 1/2 - 20 stud in kit. These pedals can be mounted centered or off center.

    • Billet aluminum 
    • Machined to fit over the stock steel brake pedal pads
    • No drilling is needed
    • Quick and easy installation
    • Rubber inserts
    • 3-3/4" wide x 2-3/4" tall

    XL and Standard Pedal Comparison Chart (Link) 

    49106013 Installation Instructions (PDF)

     

  • Lokar BAG-6135 1964-72 GM Automatic Brake Pedal Pad
    Lokar BAG-6135 1964-72 GM Automatic Brake Pedal Pad
    x
                Get rid of those ugly original pedals and replace them with these billet aluminum throttle pedals and brake pedal covers. The throttle pedal assembly replaces the original while the brake pedal pads attach to your existing brake and clutch pedals.
            
  • Lokar BAG-6132 1964-72 GM Clutch and Manual Brake Pads
    Lokar BAG-6132 1964-72 GM Clutch and Manual Brake Pads
    x
                Get rid of those ugly original pedals and replace them with these billet aluminum throttle pedals and pedal pads. The throttle pedal assembly replaces the original while the pedal pads attach to your existing brake and clutch pedals.
            
  • Lokar BAG-6138 55-57 Chevy Curved XL Non-Power Alum Brake Pedal Pad
    Lokar BAG-6138 55-57 Chevy Curved XL Non-Power Alum Brake Pedal Pad
    x
                

    For a compact and clean look, Lokar has put a modern bend on classic brake pedal pads. These curved brake/clutch pedal covers add style and function to your classic car. Designed with hidden screws, these pads are curved and pocketed to match and bolt directly to the factory steel brake pedal. Each brake pedal cover has been fashioned after its corresponding factory rubber pad and is available in a brushed finish.

    • Extra Large Non-Power Brake Pedal Pad
    • Billet aluminum
    • Machined to fit over the stock steel pads
    • Quick and easy installation
    • Rubber inserts
    • Brushed finish

    4916138 Installation Instructions (PDF)

  • Lokar XBAG-6005 Standard Black Billet Alum Brake Pedal Pad w/Rubber
    Lokar XBAG-6005 Standard Black Billet Alum Brake Pedal Pad w/Rubber
    x
                

    Billet aluminum brake pedal covers are designed to match the throttle pedal assemblies and are machined to fit over the stock steel pads with Lokar's exclusive mounting design, no drilling is needed and installation is simple. Traditional brake pedal pads are available with rubber inserts and a brushed finish. Lokar's billet aluminum brake pedal cover is designed with a 1/2 - 20 thread and includes a 1/2 - 20 stud in kit. These pedals can be mounted centered or off center.

    • Billet aluminum 
    • Machined to fit over the stock steel pads
    • No drilling is needed
    • Quick and easy installation
    • Rubber inserts
    • 3" x 2"

    XL and Standard Pedal Comparison Chart (Link) 

    49106005 Installation Instructions (PDF)

  • TCI 600-6570-56 Under-Floor Power Brake / Hydraulic Clutch Assembly
    TCI 600-6570-56 Under-Floor Power Brake / Hydraulic Clutch Assembly
    x
                

    Want to put a manual transmission in your street rod?  These universal pedal assemblies offer a clean, simple way to mount your brake master cylinder and hydraulic clutch master cylinder to the frame, under the floor.  Kits include a bracket and pedals, plus new brake and clutch master cylinders.  Power brake kit has a 7” brake booster and matching master cylinder.

    • Overall length from front of pedal arm to back of master cylinder is 25-1/2"
    • Overall width from frame rail to right side of booster is 11-1/8"
    • Height from top of pedal assembly to bottom of booster is 6-3/4"
    • Top of pedal assembly to center of pedal pad mounting hole is 8-1/2"

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.

     

  • TCI 600-6571-56 Under-Floor Manual Brake / Hydraulic Clutch Assembly
    TCI 600-6571-56 Under-Floor Manual Brake / Hydraulic Clutch Assembly
    x
                

    Want to put a manual transmission in your street rod?  These universal pedal assemblies offer a clean, simple way to mount your brake master cylinder and hydraulic clutch master cylinder to the frame, under the floor.  Kits include a bracket and pedals, plus new brake and clutch master cylinders.  Maximum brake pedal throw is 6", clutch pedal is 5.6".

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection

  • Lokar BAG-6076 1955-57 Chevy Billet Brake/Clutch Pedal Cover
    Lokar BAG-6076 1955-57 Chevy Billet Brake/Clutch Pedal Cover
    x
                

    These pedal covers go over your 1955-57 Chevy clutch and non-power brake pedals and are retained by 4 allen head button bolts that screw into the back side.

    • Outside measurement of 3-7/8" x 2-5/8" fits 4-3/4" x 2-3/8" original steel pedal.
    • Thickness of billet is approximately 1-2”
    • Rubber insets extend an additional 1/16”
    • Recess in back is 3-¼” long and 1-5/8” tall by 5/16” deep
  • Lokar BAG-6107 Standard Oval Billet Aluminum Brake Pedal Pad, Brushed
    Lokar BAG-6107 Standard Oval Billet Aluminum Brake Pedal Pad, Brushed
    x
                

    These oval billet aluminum brake pads come in a standard size. The brake pedal covers are designed with a 1/2 - 20 thread and includes a 1/2 - 20 stud in the kit. Can be mounted centered or off center.

    • 1/2 - 20 thread with stud included
    • Mounted either centered or off center
    • 3-3/4" x 1-3/4"

    4916107 Installation Instructions (PDF)

  • Lokar BAG-6123 64-68 Mustang Billet Aluminum Automatic Brake Pedal Pad
    Lokar BAG-6123 64-68 Mustang Billet Aluminum Automatic Brake Pedal Pad
    x
                • 6061-T6 Billet Aluminum
    • CNC machined for looks and durability
    • Direct replacement for stock assemblies
    • Spring-loaded Throttle Pedal
    • Delrin bushings for smooth pedal movement
    • Rubber inserts on all brake pedal covers for traction
    • 3M black adhesive included for installing rubber inserts
    • Easy to install with basic hand tools
  • Lokar BAG-6125 69-70 Mustang Billet Aluminum Automatic Brake Pedal Pad
    Lokar BAG-6125 69-70 Mustang Billet Aluminum Automatic Brake Pedal Pad
    x
                • 6061-T6 Aluminum
    • CNC machined for looks and durability
    • Direct replacement for stock assemblies
    • Spring-loaded Throttle Pedal
    • Delrin bushings for smooth pedal movement
    • Rubber inserts on all brake pedal covers for traction
    • 3M black adhesive included for installing rubber inserts
    • Easy to install with basic hand tools
  • Lokar BAG-6134 1967-69 Camaro/Firebird Automatic Brake Pedal Pad
    Lokar BAG-6134 1967-69 Camaro/Firebird Automatic Brake Pedal Pad
    x
                

    For a compact and clean look, Lokar has put a modern bend on classic brake pedal pads. These curved brake pedal covers add style and function to your classic car. Designed with hidden screws, these pads are curved to match and bolt directly to the factory steel brake pedal. Each brake pedal cover has been fashioned after its corresponding factory rubber pad and features a brushed finish.

  • Lokar BAG-6078 1955-57 Chevy Billet Power Brake Pedal Pad
    Lokar BAG-6078 1955-57 Chevy Billet Power Brake Pedal Pad
    x
                

    These brake pedal covers go over your 1955-57 Chevy power brake pedals and are retained by 4 allen head button bolts that screw into the back side.

    Outside measurement of 5" x 2-3/4" fits 4-3/4" x 2-3/8" original steel pedal.

  • Lokar BAG-6153 Lakester Steel Automatic Brake Pedal Pad, Chromed
    Lokar BAG-6153 Lakester Steel Automatic Brake Pedal Pad, Chromed
    x
                

    Lakester hot rod pedal styling is a continuation of the many nostalgic products we offer at Lokar. The brake pedal covers have the same quality you have come to expect from its sister steel spoon throttle pedal and round brake/clutch pad. Lakester pedals feature curved pads and arms.

    These new nostalgic style pedal covers are available in a chromed finish. This unique pedal design will give your favorite vehicle an all new look.

    • Hot rod styling
    • Quality steel construction
    • No drilling is needed
    • Quick and easy installation
    • Chromed finish
    • 5" x 2-3/4"

    4916153 Installation Instructions (PDF)

  • Lokar BAG-6131 1962-67 Chevy II / Nova Automatic Brake Pedal Pad
    Lokar BAG-6131 1962-67 Chevy II / Nova Automatic Brake Pedal Pad
    x
                

    For a compact and clean look, Lokar has put a modern bend on classic brake pedal pads. These curved brake pedal covers add style and function to your classic car. Designed with hidden screws, these pads are curved to match and bolt directly to the factory steel brake pedal. Each brake pedal cover has been fashioned after its corresponding factory rubber pad.

  • Lokar BAG-6130 1962-67 Chevy II / Nova Clutch/Manual Brake Pedal Pads
    Lokar BAG-6130 1962-67 Chevy II / Nova Clutch/Manual Brake Pedal Pads
    x
                

    For a compact and clean look, Lokar has put a modern bend on classic brake/clutch pedal pads. These curved brake/clutch pedal pads add style and function to your classic car. Designed with hidden screws, these pads are curved to match and bolt directly to the factory steel brake/clutch pedal. Each brake/clutch pedal pad has been fashioned after its corresponding factory rubber pad.

  • Garage Sale - 1947-54 Chevy Pickup Frame Pedal Mount Bracket
    Garage Sale
    Garage Sale - 1947-54 Chevy Pickup Frame Pedal Mount Bracket
    x
                

    This is the same bracket that comes with our 1947-54 brake pedal assembly.

     

    These brackets are garage sale priced because we do not usually sell them separately.  What you see is what you get. 

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

     

  • Garage Sale - Brake Pad Arm & Booster Plate
    Garage Sale
    Garage Sale - Brake Pad Arm & Booster Plate
    x
                

    Clearance!

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

  • Garage Sale - Under Dash Brake Pedal Assembly
    Garage Sale
    Garage Sale - Under Dash Brake Pedal Assembly
    x
                Please view the product's page for more information
            
  • Garage Sale - Brake Pedal 35-40 Ford X-MNT
    Garage Sale
    Garage Sale - Brake Pedal 35-40 Ford X-MNT
    x
                

    This is garage sale priced because it is missing the pedal pad and was installed.

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS  

     

    Plain steel 1935-40 crossmember mounted brake pedal.