Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Filter

Page 1 of 6

Products

Brake Pedal

Shop Muscle Brakes At Speedway Motors

Speedway Motors is the #1 authority on disc brakes conversion kits. With the most experience in the American muscle car business, you can be assured that you are getting a quality and precise fitting kit. Insist on a Speedway front disc brake conversion kit for your classic Chevy, Ford or Mopar muscle car. Don't forget to check out our huge selection of dropped spindles, master cylinders, flaring tools and proportioning valves. Stock up on all the essential brake lines, brake rotors, brake pads and fittings, too!

Featured Products
  • Threaded Steel Weld Bung Fitting, 1/4 Inch NPT Female
    Threaded Steel Weld Bung Fitting, 1/4 Inch NPT Female
    (Part #6176702)
    x
                

    We offer these premium-quality weld-in bungs for a variety of uses. They're CNC-machined from steel and are great for oil or fuel tanks, radiators, valve covers, manifolds, and rear axle housings.

    Female weld bung fittings available in steel.  1/4 Inch NPT works well with rubber round pedal pad (part number 91031200) to mount pedal stud. 

    Threaded Steel Weld Bung Fitting

    • 1/4 Inch NPT

    Fitting Thread Application Chart (GIF)

     

  • Wilwood 340-1290 Swing Mount Clutch/Brake Pedal, Single M/C, 7:1
    Wilwood 340-1290 Swing Mount Clutch/Brake Pedal, Single M/C, 7:1
    (Part #8353401290)
    x
                

    This pedal is often used as a clutch pedal with a single outlet master cylinder, or as a brake pedal in conjunction with dual outlet, tandem master cylinders on four wheel brake equipped vehicles. The pedal features all aluminum frame and arm construction with steel pivots, mounting studs, and an anti-skid pedal pad.

    Swing mount has a 7.00 to 1 pedal ratio.

    Pedal Dimensions (Link)

    Detailed Schematic of Pedal 

    835-3401290 Instructions (PDF) 

     

  • Lokar BAG-6076 1955-57 Chevy Billet Brake/Clutch Pedal Cover
    Lokar BAG-6076 1955-57 Chevy Billet Brake/Clutch Pedal Cover
    (Part #4916076)
    x
                

    These pedal covers go over your 1955-57 Chevy clutch and non-power brake pedals and are retained by 4 allen head button bolts that screw into the back side.

    • Outside measurement of 3-7/8" x 2-5/8" fits 4-3/4" x 2-3/8" original steel pedal.
    • Thickness of billet is approximately 1-2”
    • Rubber insets extend an additional 1/16”
    • Recess in back is 3-¼” long and 1-5/8” tall by 5/16” deep
  • Garage Sale - Lokar XBAG-6080 Midnight Series 55-57 Chevy XL Non-PWR Brake Pad w/Rub
    Garage Sale - Lokar XBAG-6080 Midnight Series 55-57 Chevy XL Non-PWR Brake Pad w/Rub
    (Part #UP48005)
    x
                

    This pedal pad is garage sale priced because we do not usually stock it.   

     NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

    Brake and Clutch Pads are designed to match the Throttle Pedal assemblies. With Lokar's exclusive mounting design, no drilling is needed to mount pads, which allows easy installation.
    XL Non-Power Brake Pads:

    • Outside measurement of 6 x 2 3/4 and fits 3 1/4 x 1 5/8 original steel brake pedal
  • Lokar SG-6017 X-Large Steel Brake Pedal Pad w/Rubber Inserts, Chromed
    Lokar SG-6017 X-Large Steel Brake Pedal Pad w/Rubber Inserts, Chromed
    (Part #4916017)
    x
                

    Lokar's chrome steel brake pedal cover is EXTRA LARGE for those seeking more substance under foot.  The brake pedal pads mount with a 1/2 - 20 stud built into the back of the pad.

    • Chrome finish
    • Designed after OEM pedals
    • EXTRA LARGE for those seeking more substance under foot
    • Mount with a 1/2 - 20 stud built into the back of the pad
    • 3-3/4" x 2-3/4"

    Brake and Clutch Pedal Pad Installation Instructions (PDF)

  • Wilwood 340-1289 Floor Mount Clutch/Brake Pedal, Single M/C, 6:1
    Wilwood 340-1289 Floor Mount Clutch/Brake Pedal, Single M/C, 6:1
    (Part #8353401289)
    x
                This pedal can be used for either a hydraulic clutch release or brake master cylinder when used with Wilwood's tandem feed master cylinder and adapter kit. 
    • 6:1 pedal ratio
    • All aluminum frame and arm with steel pivots
    • Anti-skid pedal pad
    • Mounting flange is a vertical pattern on a 2-1/4" on center

    835-3401289 Dimensions (Link)

    Brake Pedal and Blanace Bar Instruction Guide (PDF) 

  • Lokar BAG-6130 1962-67 Chevy II / Nova Clutch/Manual Brake Pedal Pads
    Lokar BAG-6130 1962-67 Chevy II / Nova Clutch/Manual Brake Pedal Pads
    (Part #4916130)
    x
                

    For a compact and clean look, Lokar has put a modern bend on classic brake/clutch pedal pads. These curved brake/clutch pedal pads add style and function to your classic car. Designed with hidden screws, these pads are curved to match and bolt directly to the factory steel brake/clutch pedal. Each brake/clutch pedal pad has been fashioned after its corresponding factory rubber pad.

  • Lokar BAG-6107 Standard Oval Billet Aluminum Brake Pedal Pad, Brushed
    Lokar BAG-6107 Standard Oval Billet Aluminum Brake Pedal Pad, Brushed
    (Part #4916107)
    x
                

    These oval billet aluminum brake pads come in a standard size. The brake pedal covers are designed with a 1/2 - 20 thread and includes a 1/2 - 20 stud in the kit. Can be mounted centered or off center.

    • 1/2 - 20 thread with stud included
    • Mounted either centered or off center
    • 3-3/4" x 1-3/4"

    4916107 Installation Instructions (PDF)

Filter

"Muscle Car, Brake Pedal" Page 1 of 6

Page 1 of 6

  • Lokar BAG-6005 Billet Aluminum Brake Pad w/Rubber, Brushed
    Lokar BAG-6005 Billet Aluminum Brake Pad w/Rubber, Brushed
    (Part #491BAG6005)
    x
                
    • Made to cover the factory brake pad. Billet aluminum construction with hardware included. Made in the U.S.A. Lifetime warranty.
    • Designed w/1/2 X 20 Thread
    • Incl. 1/2 X 20 Stud In Kit
    • Can Be Mounted Centered Or Off Center
    • Rubber Insert Designed Pad
    • Made In The U.S.A.
    • Lifetime Warranty
  • Lokar XBAG-6143 Midnight Series 68-72 Nova Billet Auto Brake Pad w/Rub
    Lokar XBAG-6143 Midnight Series 68-72 Nova Billet Auto Brake Pad w/Rub
    (Part #491XBAG6143)
    x
                

    Direct replacement Throttle Pedal Assemblies for 1962-1972 Chevy II/Nova with ball-milled pads or rubber inserts eliminate the factory rod linkage, are designed to mount in the original firewall location and utilize a modern Lokar Throttle Cable system. The arms are splined for fine adjustment and can be switched for right and left adjustment of the throttle pad, which is spring-loaded and measures 2"x5". For a compact and clean look, Lokar has put a modern bend on classic brake/clutch pedal pads.

    • Our Curved Brake/Clutch Pedal Pads add style and function to your classic car.
    • Designed with hidden screws, these pads are curved to match and bolt directly to the factory steel brake/clutch pedal.
    • Each brake/clutch pedal pad has been fashioned after its corresponding factory rubber pad and is available in brushed or black finish.


    Tech Note:
    Lokar's 1968-1972 Nova Throttle Pedal is designed to replace rod style throttle linkage only. Part Nos. BAG-6142 and XBAG-6142. To complete the installation use Lokar's Throttle Cables and Mounting Brackets.

  • Lokar XBAG-6078 Midnight Series 55-57 Chevy Power Brake Pad w/Rubber
    Lokar XBAG-6078 Midnight Series 55-57 Chevy Power Brake Pad w/Rubber
    (Part #491XBAG6078)
    x
                Brake and Clutch Pads are designed to match the Throttle Pedal assemblies. With Lokar's exclusive mounting design, no drilling is needed to mount pads, which allows easy installation.
    Power Brake Pads:
    • Outside measurement of 5 x 2 3/4 fits 4 3/4 x 2 3/8 original steel brake pedal

  • Threaded Steel Weld Bung Fitting, 1/4 Inch NPT Female
    Threaded Steel Weld Bung Fitting, 1/4 Inch NPT Female
    (Part #6176702)
    x
                

    We offer these premium-quality weld-in bungs for a variety of uses. They're CNC-machined from steel and are great for oil or fuel tanks, radiators, valve covers, manifolds, and rear axle housings.

    Female weld bung fittings available in steel.  1/4 Inch NPT works well with rubber round pedal pad (part number 91031200) to mount pedal stud. 

    Threaded Steel Weld Bung Fitting

    • 1/4 Inch NPT

    Fitting Thread Application Chart (GIF)

     

  • Lokar BAG-6094 67-69 Camaro/Firebird Automatic Brake Pedal Pad, Rubber
    Lokar BAG-6094 67-69 Camaro/Firebird Automatic Brake Pedal Pad, Rubber
    (Part #4916094)
    x
                

    Billet aluminum brake and clutch pedal covers are designed to match the throttle pedal assemblies and are machined to fit over the stock steel pads with Lokar's exclusive mounting design, no drilling is needed and installation is simple. Traditional brake pedal covers are available with rubber inserts and a brushed finish.

    • Billet aluminum
    • Machined to fit over the stock steel brake pedal pads
    • No drilling is needed
    • Quick and easy installation
    • Rubber inserts
    • Brushed finish

    4916094 Installation Instructions (PDF)

  • Lokar BAG-6163 64-75 Chevelle Curved Billet Aluminum E-Brake Pedal Pad
    Lokar BAG-6163 64-75 Chevelle Curved Billet Aluminum E-Brake Pedal Pad
    (Part #4916163)
    x
                

    For a compact and clean look, Lokar has put a modern bend on classic brake/clutch pedal pads. These curved brake/clutch pedal covers add style and function to your classic car. Designed with hidden screws, these brake pedal pads are curved to match and bolt directly to the factory steel brake/clutch pedal. Each brake/clutch pedal cover has been fashioned after its corresponding factory rubber pad and is available in a brushed finish.

    • Direct replacement
    • Billet aluminum
    • Machined to fit over the stock steel pads
    • No drilling is needed
    • Quick and easy installation
    • Rubber inserts
    • Brushed finish

    E-Brake Pedal Pad Installation Instructions (PDF)

  • Lokar BCA-9505 180 Billet Direct Fit Auto Brake Pedal Arm, XL Pad
    Lokar BCA-9505 180 Billet Direct Fit Auto Brake Pedal Arm, XL Pad
    (Part #491BCA9505)
    x
                
    • Billet Brake Pedal Arm
  • Lokar BFG-6013 Billet Aluminum XL Series Brake Pedal Pad w/Rubber
    Lokar BFG-6013 Billet Aluminum XL Series Brake Pedal Pad w/Rubber
    (Part #4916013)
    x
                Lokar's billet aluminum brake pedal cover is EXTRA LARGE for those  seeking  more substance under foot.  These brake pedal pads mount with  a 1/2 - 20  stud built into the back of the pad. 
    • XL Series Pad Size, measures 3-3/4" wide x 2-3/4" tall
    • Rubber Insert Design Pad
    • Brushed Aluminum Finish

    Brake and Clutch Pedal Pad Installation Instructions (PDF)

  • Lokar XBAG-6110 Midnight Series 58/62 Corvette Brake/Clutch Pedal Pads
    Lokar XBAG-6110 Midnight Series 58/62 Corvette Brake/Clutch Pedal Pads
    (Part #491XBAG6110)
    x
                Made to cover the factory brake pad. Billet aluminum construction with hardware included. Made in the U.S.A. Lifetime warranty.
    • Black Anodized Billet Aluminum Brake Pad w/Rubber
    • Made In The U.S.A.
    • Lifetime Warranty
  • Lokar SG-6008 Steel Brake Pad w/Rubber, Chromed
    Lokar SG-6008 Steel Brake Pad w/Rubber, Chromed
    (Part #491SG6008)
    x
                Lokar's Steel Throttle Pedals are the first spring-loaded steel pedal in the industry and designed after OEM pedals. Removable lower arm is splined for versatility in mounting to the right or left of the mounting bracket.
    • Lokar offers these steel assemblies in both our standard pad size and our larger, XL pad.
    • The XL pad is EXTRA  LARGE for those seeking more substance under foot.
    • Matching Steel Brake Pads mount with a 1/2 - 20 stud built into the back of the pad.
    • Matching Dimmer Switch Cover fits both Chevy and Ford.
    • Available in chromed finish
  • Lokar XBAG-6107 Midnight Series Standard Oval Billet Alum Brake Pad
    Lokar XBAG-6107 Midnight Series Standard Oval Billet Alum Brake Pad
    (Part #491XBAG6107)
    x
                
    • Brake pads are designed with a 1/2 - 20 thread.
    • Includes a 1/2 - 20 stud in the kit.
    • Can be mounted centered or off center.
  • Lokar BAG-6137 55-57 Chevy Curved Power Billet Alum Brake Pedal Pad
    Lokar BAG-6137 55-57 Chevy Curved Power Billet Alum Brake Pedal Pad
    (Part #4916137)
    x
                

    For a compact and clean look, Lokar has put a modern bend on classic brake pedal pads. These curved brake/clutch pedal covers add style and function to your classic car. Designed with hidden screws, these pads are curved and pocketed to match and bolt directly to the factory steel brake pedal. Each brake pedal cover has been fashioned after its corresponding factory rubber pad and is available in a brushed finish.

    • Billet aluminum
    • Machined to fit over the stock steel pads
    • Quick and easy installation
    • Rubber inserts
    • Brushed finish

    4916137 Installation Instructions (PDF)

  • Lokar XBAG-6135 Midnight Series 64-72 Chevelle Auto Brake Pad w/Rubber
    Lokar XBAG-6135 Midnight Series 64-72 Chevelle Auto Brake Pad w/Rubber
    (Part #491XBAG6135)
    x
                

    Direct replacement Throttle Pedal Assemblies for 1964 - 1975 Chevelle with ball-milled pad or with rubber inserts eliminate the factory rod linkage, are designed to mount in the original firewall location and utilize a modern Lokar Throttle Cable system. The arms are splined for fine adjustment and can be switched for right and left adjustment of the throttle pad, which is spring-loaded and measures 2"x5". 

    • Lokar has put a modern bend on classic brake/clutch pedal pads.
    • Our Curved Brake/Clutch Pedal Pads add style and function to your classic car.
    • Designed with hidden screws, these pads are curved to match and bolt directly to the factory steel brake/clutch pedal.
    • Each brake/clutch pedal pad has been fashioned after its corresponding factory rubber pad.
  • Lokar XBAG-6141 Midnight Series 58-65 Chevy Billet Auto Brake w/Rubber
    Lokar XBAG-6141 Midnight Series 58-65 Chevy Billet Auto Brake w/Rubber
    (Part #491XBAG6141)
    x
                
    • 1958-1962 Corvette billet aluminum Curved Brake/Clutch Cover is machined to fit over the stock Corvette steel brake/clutch pads.
    • 1997 & later Corvette and 2005 - 2006 GTO throttle pads are designed as a direct fit replacement.
    • Available in brushed or black finish.
  • Lokar XBCA-9511 Midnight Series 55-57 Chevy Direct-Fit Brake Pedal Arm
    Lokar XBCA-9511 Midnight Series 55-57 Chevy Direct-Fit Brake Pedal Arm
    (Part #491XBCA9511)
    x
                
    • Splined Arms For Fine Adjustment
    • Windowed Arms Match Other Lokar Products
    • Powder coated Black
    • No Unsightly Set Screws
    • Made In The U.S.A.
  • Lokar XBAG-6153 Midnight Series Lakester Steel Auto Brake Pedal Pad
    Lokar XBAG-6153 Midnight Series Lakester Steel Auto Brake Pedal Pad
    (Part #491XBAG6153)
    x
                

    Lakester hot rod pedal styling is a continuation of the many nostalgic products we offer at Lokar. The pedals have the same quality you have come to expect from its sister steel spoon throttle pedal and round brake/clutch pad. The removable lower arm is splined for versatility in mounting to the right or left of the mounting bracket.

    • Lakester pedals feature curved pads and arms.
    • This unique pedal design will give your favorite vehicle an all new look.
    • The throttle pedal is designed using Delrin bushings for smooth operation when throttling up or down during daily use.
Goto Previous PagePrevious Page
1 2 3 4 5 6