Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Muscle Car Body, Interior, Gauges At Speedway Motors

There is no denying that muscle cars are the hottest rides on the street right now. Speedway Motors has the high performance muscle car parts to take you back to the '60s and '70s! Whether you run a Chevy, Ford or Mopar, you can find the right stuff for it here! Similar to your muscle car, Speedway Motors leaves our competitors in the dust when it comes to prices and selection.

Featured Products
Dynamat 10455 Xtreme Bulk Pack, Cut-to-Fit Thermal and Sound Insulation
Dynamat 10455 Xtreme Bulk Pack, Cut-to-Fit Thermal and Sound Insulation
x
            

Reduce road noise and vibration while making your stereo sound twice as good fast with Dynamat. By first laying down a layer of Dynamat Xtreme, you will make your car quiet and cooler. Add another layer of Dynaliner and you will make it even cooler. Or a layer of Dynapad and make it quieter. A Dyna-Roller will make installation easy. 

Kit contains nine 18" x 32" pieces (36 square feet) of Dynamat Xtreme (.067" thick) for rear decks, doors, floors and trunk floors. Unlike Dynamat Original, Dynamat Xtreme is also recommended for trunk lids, roofs, quarter panels, under-hood installations and multi-purpose use.

Simply measure your application to order the necessary amount. This product dramatically cuts heat and noise from inside the vehicle for more enjoyable cruising and every day driving.

  • Use to get more bass, more music, lower road noise and better sound
  • Kit contains (9) nine 18" x 32" pieces (36 square feet)
  • Simply measure and cut to fit your application

Dynamat Information Sheet (PDF)

Dynamat Tech Spec Sheet (PDF)

Dynamat 10465 Xtreme Mega Pack
$399.99
Product Rating: 4.50 Stars
Dynamat 10465 Xtreme Mega Pack
x
            

You may not be Chip Foose, but you can use the same Dynamat products Chip does. By first laying down a layer of Dynamat Xtreme, you will make your car quiet and cooler. Add another layer of Dynaliner and you will make it even cooler. Or a layer of Dynapad and make it quieter. A Dyna-Roller will make installation easy. 

This industrial-sized Mega Pak contains nine 24" x 48" flat sheets of Dynamat Xtreme for a total of 72 sq. ft. For complete coverage on rear decks, doors, floors and trunks.

Dynamat Mega Pak Contents: (9) 24"x 48" (609mm x 1219mm) sheets of Dynamat Xtreme and is .067 thick.

Application: Use on rear decks, doors, floors and the trunk to get more bass, more music, lower road noise and better sound. Create a solid, quiet luxury-car feel.

Dynamat Information Sheet

Dynamat Tech Spec Sheet 

Speedway Universal 20 Circuit Wiring Harness
Speedway Universal 20 Circuit Wiring Harness
x
            Whether you're building an option loaded car or just want to have extra circuits available for future updates, this harness is perfect and makes any job painless. Compact 5-1/2"L x 4-1/2"W x 3-1/4"H  fuse block holds 18 standard push-in fuses and can be mounted almost anywhere. 

Each high temperature wire is color coded and labeled every six inches. Also includes GM type steering column connectors. To keep costs down and the quality high, this harness does not include any switches, light sockets or plugs that you would normally already have.

  • Harness has 20 circuits, of which 18 are fused
  • Taillight leads measure 17' long
  • Includes plug for GM column, headlight switch, dimmer switch, and signal flashers

Wiring Harness Installation Instructions (PDF)

Speedway 6 Gauge Set
$209.99
Product Rating: 5.00 Stars
Speedway 6 Gauge Set
x
            
  • Stainless steel bezel
  • Backlit white face
  • Includes:
    • 3-3/8” Mechanical Speedometer       
    • 2-1/16” gauges
    • Six gauge set includes 3 3/8” electric tach as well
  • Mechanical oil pressure gauge and line kit
  • Voltmeter
  • Mechanical water temp gauge
  • Fuel gauge and sender
  • Tachometer NOT for use with solid core wires
  • Tachometer MUST be used with a resistor core wire wire and plugs
  • Repacement light socket assembly available #s 910-65075 & 910-65071

"Muscle Car, Body" Page 1 of 20

  • EMPI 62-2310 High Back Bucket Seat Cover, Black w/Square Pattern, Each
    EMPI 62-2310 High Back Bucket Seat Cover, Black w/Square Pattern, Each
    x
                

    Add these thickly padded high grade vinyl seat covers for that one-off custom look and added comfort to your Poly High Back bucket seat (141-2300).  EMPI's seat covers are available in Black and come with snap fasteners secure and install easily. These covers also come with two harness slots, making them usable on many other manufacturers' poly seats.

    • Thick padded high grade vinyl construction
    • Designed for use with EMPI's Poly High Back seat (141-2300)
    • Black with square pattern
    • Snap fasteners
    • Dual harness slots
  • Speedway Fuel Level Gauge with Sender, 2-1/16 Inch
    Speedway Fuel Level Gauge with Sender, 2-1/16 Inch
    x
                

    These fuel level gauge/sender kits feature a domed lens and a stainless steel bezel and a backlit white face.  The fuel sender comes with seal and and all mounting hardware.

    • 2-1/16”
    • Overall Diameter: 2.25"
    • Overall Length: 9.25"
    • Includes sender
    • 240 ohms empty, 33 ohms full
    • Stainless steel bezel
    • Backlit white face
    • Replacement light socket assembly available # 910-65071

    Learn more about selecting the proper fuel sending unit by reading our tech article, Fuel Sending Units.

  • Auto Meter 201009 Cobra Voltmeter Gauge, Short Sweep Electric, 2 Inch
    Auto Meter 201009 Cobra Voltmeter Gauge, Short Sweep Electric, 2 Inch
    x
                

    This vintage instrument series is designed to accurately re-create the period correct details of the instruments used in the original Cobra Roadster while incorporating the latest technology advancements in performance gauges from Auto Meter. These black dial face instruments feature incandescent through the dial backlighting with white pointers, traditional numbers and tick marks, and are finished with flat glass and scalloped chrome bezels.

    • Short Sweep Electric Voltmeter
    • 8-18 V
    • Mounts in 2-1/16" Hole
    • Includes mounting hardware and Incandescent Backlighting
    • Requires 18 gauge electrical wire and ring or spade terminal connections for installation (not included)
  • Classic Instruments CH01BSLF Tetra Series 1957 Chevy Gauge Set, Black
    Classic Instruments CH01BSLF Tetra Series 1957 Chevy Gauge Set, Black
    x
                

    Classic Instruments designed these gauges specifically for your '57 Chevy car. This package replaces your original gauges and incorporates a 140 mph speedometer, 8000 rpm tachometer, oil pressure, volt, water temperatrure, fuel level plus high beam indicator. Classic has built the essential electronic circuit boards right into the gague. Electronic speedometer calibration no longer requires knuckle busting or removal of the dash panel! No remote sender needed.

    The fuel gauge is calibrated 0-30 ohms so it will work with your original '57 sending unit and all other sending units are included. Dash bezel not included, reuse your original.

    • Fuel gauge set up for 1957 stock fuel sending unit (0-30 ohms)
    • Includes mounting bracket to mount in stock 1957 gauge bezel
    • Polished stainless gauge bezels over flat glass face
    • Electric programmable speedometer
    This gauge set includes:
    • Programmable, electronic speedometer (includes GM style speedo sender)
    • Electronic oil pressure gauge (plus sender)
    • Electronic temperature gauge (plus sender)
    • Fuel level gauge that is compatible with stock Chevy sending unit (does NOT include the fuel sender. You will need to re-use your original fuel sending unit.)

    Classic Instruments Installation Manual (PDF)

  • DEi 050200 Boom Mat Damping Material, 12 x 12-1/2 Inch, 2 Sheets
    DEi 050200 Boom Mat Damping Material, 12 x 12-1/2 Inch, 2 Sheets
    x
                Please view the product's page for more information
            
  • Classic Instruments Speedometer Gauge Set, V8 Speedster Face
    Classic Instruments Speedometer Gauge Set, V8 Speedster Face
    x
                

    Tom Gale, formerly Chief Designer of the Daimler Chrysler Corporation, has led the Classic Instruments design team in the production of a beautiful new series. Designed with unique dial faces that are spun and engine turned aluminum. The pointers for this series is a new design and each pointer is chrome painted. The face has a chrome V8 emblem signifying American Hot Rod Heritage. The light diffusers have laser etched indices lining up with the indices on the gauge faces.

    The V8 Red Steelie series features a vivid red background with spun aluminum numbers and accent graphics that brightly bounce off the red background. The series also features the uniquely designed pointer for the V8 line which is chrome plated and balanced for precision accuracy. Additional details within the instruments are laser etched markings on the light diffuser ring which add a level of dimension and functionality. The etching corresponds with the indices on the face and flow into a polished stainless high step bezel that is crimped around a optic grade curved lens to complete the overall design.

    • Black "V8 Speedster" face design or Red "V8 Red Steelie" face design
    • Kit includes 3-3/8" Speedo & Tach, 2-1/8" Fuel, Oil, Temp, Volts
    • Standard GM sender pack included

    Classic Instruments Installation Manual (PDF)

  • EMPI 62-2408 Poly Low Back Bucket Seat Cover, Black w/Square Pattern, Each
    EMPI 62-2408 Poly Low Back Bucket Seat Cover, Black w/Square Pattern, Each
    x
                

    Add these thickly padded high grade vinyl seat covers for that one-off custom look and added comfort to your Poly Low Back bucket seat (141-2400).  EMPI's seat covers are available in Black and come with snap fasteners secure and install easily. These covers also come with two harness slots, making them usable on many other manufacturers' poly seats.

    • Thick padded high grade vinyl construction
    • Designed for use with EMPI's Poly Low Back seat (141-2400)
    • Black with square pattern
    • Snap fasteners
    • Dual harness slots
  • DEi 010393 Reflect-A-GOLD Heat Reflective Tape, 24 x 24 Inch Sheet
    DEi 010393 Reflect-A-GOLD Heat Reflective Tape, 24 x 24 Inch Sheet
    x
                Reflect-A-GOLD is a metalized polyamide  polymer laminated glass cloth with a high temperature pressure sensitive  adhesive for use in extreme temperature swing environments. It is  lightweight and easy to apply and remove. 

    Highly effective material for firewalls, fuel cells, engine covers, under hoods, engine compartment, bulk heads, seat bottoms – anything or area that needs protection from heat.

    • For firewalls, bulkheads, engine covers, floors, seat bottoms & more
    • Capable of handling continual temperatures up to 850°F
    • Resists UV degradation for long-term performance
    • Virtually NO clearance needed
    • Adhesive protected by a release liner rated up to 325°F
    • Light weight and flexible-Trim to size
    • Space age polymer material
    • Reflects up to 850°F! Reflecting 80% of heat!
    • Ultra light weight and self adhesive
  • Omega Kustom 20235 8000 RPM Tach, 5 Inch, Tan Face
    Omega Kustom 20235 8000 RPM Tach, 5 Inch, Tan Face
    x
                

    Omega Kustom tachometers are made in the U.S.A. with a 3 year warranty. Features a stainless steel bezel, anti-scratch glass lens, precision movements, plastic case, and adjustable brackets.

    Omega Kustom Tach Gauge Installation Instructions (PDF)

    Gauge Mounting Information (PDF)

  • HushMat 20200 Silencer Megabond 1/4 In. Sound & Thermal Insulation Kit
    HushMat 20200 Silencer Megabond 1/4 In. Sound & Thermal Insulation Kit
    x
                

    A HushMat Silencer Megabond ¼” Sound and Thermal Insulating Kit is universal and designed to treat two full size doors or one full sized headliner. HushMat Silencer Megabond reduces airborne noise and radiant heat through absorption.

    • Silencer Megabond is formulated to withstand the automotive environment
    • Withstands temperatures from -30 degrees up to +280 degrees Fahrenheit
    • Absorbs airborne noise from 600 – 4000 Hz frequency
    • Easy to mold around uneven surfaces
    • Self Adhesive peel and stick – no secondary glue and NO spray
    • Trims with razor knife or household scissors
    HushMat Door Kit contains two (2) 23” x 36” sheets or 11.5 Square Feet of OEM Approved foam insulating material.

    Use HushMat Silencer Megabond 1/4" foam on the back side of the door trim panel and HushMat Ultra Door Kit (Speedway Part #

  • '64-'70 Mustang Crossmember
    $299.99
    Product Rating: 5.00 Stars
    '64-'70 Mustang Crossmember
    x
                Please view the product's page for more information
            
  • Stewart Warner 82311 Deluxe Ammeter Gauge, 2-1/16 Inch, 60-0-60 Amps
    Stewart Warner 82311 Deluxe Ammeter Gauge, 2-1/16 Inch, 60-0-60 Amps
    x
                Stewart Warner Deluxe 2-1⁄16" diameter ammeter gauges feature a black face, white letters and chrome bezel. A 12 volt light is included.
            
  • Morris Classic Concepts 3-Point Seat Belt Kit for 1968 Firebird, Floor Mount
    Morris Classic Concepts 3-Point Seat Belt Kit for 1968 Firebird, Floor Mount
    x
                Safety and comfort come first with these seat belts. Kits come complete  with instructions, Grade 8 mounting hardware and powder-coated mounting  brackets, assembled and ready to bolt into your car. These seat belt  systems mount in the factory mounting holes; no modifications needed.  The top soft sash design looks like "stock" and comes with plastic  clamshell covers. All belts have been safety tested and meet FMVSS  standards! 
    • For front seats
    • Floor mount
    • Modern safety for your classic GM, assembled and ready to bolt into your car
    • Chrome plated buckle with "GM" button
    • Officially licensed product
    • OEM type retractor
    • Black webbing
    • Mount in the factory mounting holes; no modifications needed
    • Kits come complete with:
      • Instructions
      • Grade 8 mounting hardware
      • Powder-coated mounting brackets
  • Omega Kustom 22085 Tan Face 5-Gauge Set, Electric Speedometer, 4-3/8
    Omega Kustom 22085 Tan Face 5-Gauge Set, Electric Speedometer, 4-3/8
    x
                

    Omega Kustom Instruments produces the most advanced speedometers and auxilary gauges available anywhere. All of Omega Kustom’s instruments have the finest movements available today and the latest lighting technology. Each gauge in the kit is surrounded by polished stainless steel bezels and real glass lenses.

    Each Timeless Tan Series set includes:

    • 4-3/8" Speedometer (electric w/ GM style sender)
    • 2-1/16" Fuel Level (w/ sender)
    • 2-1/16" Water Temp (electric w/ sender)
    • 2-1/16" Oil Pressure (electric w/ sender)
    • 2-1/16" Voltmeter

    Omega Gauge Installation Instructions (PDF)

    Gauge Mounting Information (PDF)

  • Speedway Electric Speedometer, 3-3/8 Inch Diameter
    Speedway Electric Speedometer, 3-3/8 Inch Diameter
    x
                These electric speedometers are perfect for your rod or race project. They feature a white face with bold black lettering and a bright orange needle for quick monitoring.  Our 0-160 mph speedometers also come with a stainless steel bezel and a complete installation kit. 
    • 3-3/8” body diameter
    • 3-3/4 ” bezel
    • Overall Diameter: 3-3/4"
    • Body Length: 1.60"
    • Stud Length: 1.00"
    • Backlit white face with black lettering
    • Orange needle
    • Electric
    • 0-160 mph range
    • Stainless steel bezel
    • Includes installation kit
    • SENDER NOT Included
    • Replacement light socket assembly available # 910-65075

    Instructions (PDF)

  • Lokar XIDH-2025 Midnight Series Lakester Door Handles, GM/Ford 1949-Up
    Lokar XIDH-2025 Midnight Series Lakester Door Handles, GM/Ford 1949-Up
    x
                
    • Nostalgia Styling
    • Steel Splined Arms for a full 360 fine adjustment
    • Hidden set screws
    • Available in chrome, black and raw finish
    • Matches Lakester Throttle Pedal and Brake Pedal sets
    • Available for most Ford and GM Applications
    • Windowed Arms match other quality Lokar products
    • Hidden set screws
  • Painless Wiring 20120 1964-1966 Mustang 22 Circuit Wiring Harness
    Painless Wiring 20120 1964-1966 Mustang 22 Circuit Wiring Harness
    x
                

    One thing to never forget - the wiring in your muscle car is forty years old and updating to modern and safe components is easy. Owners and restorers of 1964 to 1966 first generation Mustangs can take comfort in the fact that there is now an electrical system upgrade from Painless to completely rewire this classic car. These Painless wiring harnesses feature many pre-wired connections and are color coded to make installation a snap.

    This 22 circuit direct fit 1965-1966 Mustang harness has many of the factory connectors already installed on the harness out of the box.  This harness uses our unique covered micro-fuse block.  Also featured is an auxiliary circuit with 20 amp relay for accessories such as fog lights, or an electric fuel pump. Each wire is custom printed with the circuit identification as well as using Ford color codes for easy installation.  NOTE: THIS WILL NOT FIT 1964 1/2 MUSTANGS

    1964-1966 Mustang Wiring Instructions (PDF)

    Note: Some firewall modifications required.

  • Classic Instruments AN80SHC All American Series Nickel Tach
    Classic Instruments AN80SHC All American Series Nickel Tach
    x
                

    Classic Instruments teamed up with Tom Gale, who was Chief Designer at Chrysler, to produce these beautiful gauges. They feature curved glass, polished stainless bezel, a raised logo and the vintage appearance you are looking for. The tach is 3-3/8".

     Classic Instruments Installation Manual (PDF)

  • Rubber GM Transmission Cushion
    Rubber GM Transmission Cushion
    x
                

    OEM-style rubber transmission cushion for many '58-'82 GM transmissions including TH350 auto, Muncie, Saginaw, and others.

    • Meets or exceeds OEM specifications 
    • Rubber formulation provides abrasion resistance and aging stability
    • Tough, hardened steel plate & inserts
    • Chemlock® bonding agent ensures superior rubber-to-metal bond
  • Lokar IDP-2005 Polished Billet Arm Rest Door Pulls, Pair
    Lokar IDP-2005 Polished Billet Arm Rest Door Pulls, Pair
    x
                Two screw installation, Stainless Screws included
    • Deep pocket - 4 finger width
    • Designed to recess in arm rest
    • Mounting bracket included
    • Sold in pairs
    • Complements Lokar Door Handles, Pedals and Dash Inserts
  • Auto Meter 1202 American Muscle Five Gauge Set
    Auto Meter 1202 American Muscle Five Gauge Set
    x
                

    Auto Meter has hit a home run with their new American Muscle gauge kit. The distinctive look features LED illumination, glowing red pointers, chrome bezel and spun aluminum dials. The five gauge set includes a 3-3/8" electric speedometer and 2-1/16" water, oil, volt and fuel gauges.

    • Gauge Ranges: 160 MPH / 100 PSI / 100-250 deg. F / 8-18 Volts / 240ΩE-33ΩF
    • Tach (sold separately) operates on 4, 6, or 8 cylinder engines with points, electronic, and most 12V high performance racing ignitions

    Includes all sending units.

    In-Dash Gauge Installation Instructions (PDF)

  • Scat ProCar Rally Seats with Houndstooth Inserts
    Scat ProCar Rally Seats with Houndstooth Inserts
    x
                The ProCar Rally Seat by Scat Enterprizes features OEM grade fabric and vinyl with map pockets and easy adjustment reclining levers.  Available in left or right side styles.
    • Sliders included
    • Adjustable headrest
    • Adjustable incline or recline
    • High quality TIG welded steel frame
    • High quality injected molded foam
    • Seat adaptors available for most models
    • OEM grade houndstooth center
    • Choose left or right side versions
  • Morris Classic Concepts 3-Point Seat Belt Kit, 1970-73 Firebird, Front Seats
    Morris Classic Concepts 3-Point Seat Belt Kit, 1970-73 Firebird, Front Seats
    x
                Safety and comfort come first with these seat belts. Kits come complete  with instructions, Grade 8 mounting hardware and powder-coated mounting  brackets, assembled and ready to bolt into your car. These seat belt  systems mount in the factory mounting holes; no modifications needed.  The top soft sash design looks like "stock" and comes with plastic  clamshell covers. All belts have been safety tested and meet FMVSS  standards! 
    • For front seats
    • Modern safety for your classic GM, assembled and ready to bolt into your car
    • Chrome plated buckle with "GM" button
    • Officially licensed product
    • OEM type retractor
    • Black webbing
    • Mount in the factory mounting holes; no modifications needed
    • Kits come complete with:
      • Instructions
      • Grade 8 mounting hardware
      • Powder-coated mounting brackets
  • TH350 Transmission Cushion Mount-Polyurethane
    TH350 Transmission Cushion Mount-Polyurethane
    x
                

    Heavy duty Turbo 350 polyurethane replacement for original GM mounts. Features a built-in safety lock to prevent separation. For race or street race use.

    Fits "most" GM transmissions having a mount on the tailshaft. The bolt spacing for the tranny mount will accomodate 3-3/4" to 4-1/4" bolt pattern on the transmission. For TH350 application.

  • Fuelab 71501 Fuel Pressure Gauge, 0-120 PSI
    Fuelab 71501 Fuel Pressure Gauge, 0-120 PSI
    x
                

    FueLab mechanical fuel pressure gauges featurea black housing with a white face and black text.

    • For use on regulators or fuel rails with gauge ports
    • Direct mount 1/8” NPT fitting
    • 1.5” diameter gauge face
    • Not for use in passenger or driver’s compartments
  • Lokar IDH-2026 Lakester Chromed Steel Door Handles, Ford Pre-1949
    Lokar IDH-2026 Lakester Chromed Steel Door Handles, Ford Pre-1949
    x
                 
    • Steel Splined Arms for a full 360 fine adjustment
    • Matches Lakester Throttle Pedal and Brake Pedal sets
    • Available for most GM and Ford applications
    • Windowed Arms match other quality Lokar products
    • Hidden set screws
  • Auto Meter 880088 Ford Series 3-1/8 Tachometer
    Auto Meter 880088 Ford Series 3-1/8 Tachometer
    x
                

    Won’t this gauge look sweet in your Ford hot rod? This 3-1/8" diameter Auto Meter tachometer has a vintage look that includes the Ford logo. Features a vintage-style domed lens and white gauge face. Designed to mount into your dash.

    Operates on 4, 6, or 8 cylinder engines with points, electronic, and most 12V high performance racing ignitions.

    Tach Wiring Guide (Link)

     

     

  • Stewart Warner 82307 2-1/16 Inch Deluxe Electric Water Temp Gauge
    Stewart Warner 82307 2-1/16 Inch Deluxe Electric Water Temp Gauge
    x
                Stewart Warner Deluxe Series gauges feature black faces with white lettering,  polished stainless steel bezels and back lighting for night time visibility.

    Individual Deluxe Series gauges do not come with sending units.

  • Painless 10123 1966-1976 Ford Muscle Car 21 Circuit Wiring Harness
    Painless 10123 1966-1976 Ford Muscle Car 21 Circuit Wiring Harness
    x
                

    One thing to never forget - the wiring in your muscle car is forty years old and updating to modern and safe components is easy. These Painless wiring harnesses feature many pre-wired connections and are color coded to make installation a snap. This customizable 21 circuit harness can be used in almost any application where you want Ford color coded wires. This harness uses our unique covered micro-fuse block.  Also featured is an auxiliary circuit with 20 amp relay for accessories such as fog lights, or an electric fuel pump. Each wire is custom printed with the circuit identification for easy installation.

    Designed for 1966-1976 Ford muscle cars including Galaxie, LTD, Falcon, Fairlane, Mustang, Maverick, Torino, and Ranchero.

    NOTE: Will not work with Thunderbirds. 

    1966-1976 Ford Muscle Car Wiring Instructions (PDF)

  • Omega Kustom 930233 8000 RPM Tachometer, 3-3/8, Black Face
    Omega Kustom 930233 8000 RPM Tachometer, 3-3/8, Black Face
    x
                

    Omega Kustom tachometers are made in the U.S.A. with a 3 year warranty. Features a stainless steel bezel, anti-scratch glass lens, precision movements, plastic case, and adjustable brackets.

    Omega Tach Gauge Installation Instructions (PDF)

    Gauge Mounting Information (PDF)

  • Stewart Warner 284-C72 HD 2-1/16 In. Oil Temperature Gauge, Mechanical
    Stewart Warner 284-C72 HD 2-1/16 In. Oil Temperature Gauge, Mechanical
    x
                

    Stewart Warner Heavy Duty Series gauges feature bold white graphics on black face, 270° sweep dials with white pointers. The black raised bezel has a distinctive brushed bright rim and the patented 12 volt light ring provides excellent night-time visibility.

    Includes a 72" capillary tube.

    665-284C Instructions (PDF)

  • Lokar XIDH-2014 Midnight Series Billet Window Cranks, GM/Ford 1949-Up
    Lokar XIDH-2014 Midnight Series Billet Window Cranks, GM/Ford 1949-Up
    x
                
    • Splined Arms for fine adjustment
    • Available for most GM and Ford Applications
    • Windowed Arms match other quality Lokar products
    • Hidden set screws
    • Available in brushed, polished or black finish
  • Stewart Warner 82202 Standard Ammeter Gauge-2-1/16 Inch, 60-0-60 Amps
    Stewart Warner 82202 Standard Ammeter Gauge-2-1/16 Inch, 60-0-60 Amps
    x
                Stewart Warner 2-1/16" diameter ammeter gauge with black face and white letters. Chrome bezel without backlight.
                       
  • Omega Kustom 911053 White 5-Gauge Set, Mechanical Speedometer, 3-3/8
    Omega Kustom 911053 White 5-Gauge Set, Mechanical Speedometer, 3-3/8
    x
                

    These Omega Kustom Kool White Series gauges are made in the good ol' USA and feature stainless steel bezels, glass lens, precision movements, and adjustable brackets. These five gauge sets have a 3-3/8"  mechanical speedometer which uses the standard 5/8"-18 GM style speedometer cable connection and 2-1/16" fuel level, volt, oil pressure and water temperature gauges.

    Each set includes:

    • Speedometer (mechanical)
    • Fuel Level (with sender)
    • Water Temp (electric w/ sender)
    • Oil Pressure (electric w/ sender)
    • Voltmeter

    Omega 5-Gauge Set Installation Instructions (PDF)

    Gauge Mounting Information (PDF)

  • Hagan M-ARM-N Fattie Noodle Rear-View Mirror Arms, Pair
    Hagan M-ARM-N Fattie Noodle Rear-View Mirror Arms, Pair
    x
                

    Finish off your custom street rod right with these exterior rear-view mirror arms from Hagan Street Rods.  They bolt to your vehicle with two 10-24 screws and each arm raises the mirror up 4" and out from body 4".  Comes in a show polished finish.

    • Arms are 5-1/2" 
    • Mount base is 1" x 1/2"
    • Mount holes are 5/8" apart
    • Comes with rubber gasket
    • Sold in pairs
  • DEi 050503 Floor and Tunnel Shield II, Heat and Sound Insulation, 4 Ft. x 42 Inch
    DEi 050503 Floor and Tunnel Shield II, Heat and Sound Insulation, 4 Ft. x 42 Inch
    x
                

    Designed to provide the best possible heat protection in areas where high temperatures are always present and problematic, Floor & Tunnel Shield II limits heat transfer on fire walls, transmission tunnels, floor boards, fuel cells and other areas where heat is an issue.  Floor & Tunnel Shield II provides excellent light weight thermal protection, acts as a guard against track and road debris, and provides sound deadening as well.

    Constructed with an embossed 10 mil aluminum face bonded to 1/8” composite glass-fiber core and backed with a high temp super strong pressure sensitive backing, Floor & Tunnel Shield II withstands up to 1750°F of direct continuous heat. The adhesive side holds past 450°F. Its improved multifaceted modern aluminum surface offers improved reflectivity and rigidity and allows for ease of installation. At only 3/16” thick, this product can be shaped and trimmed for a custom fit and is ideal for minimal clearance areas.

    With a unique and patented finely woven glass-fiber backing, Floor & Tunnel Shield II is the easiest, most cost effective way to control thermal transfer while protecting expensive components and vehicle occupants from extreme heat situations and sound.

    Floor & Tunnel Shield II can be used on any number of surfaces including, metal, aluminum, carbon fiber, plastic, and more. Multiple uses include: fire walls, under hoods, transm

  • Auto Meter 2242 Oil Pressure Sending Unit
    Auto Meter 2242 Oil Pressure Sending Unit
    x
                

    Auto Meter sending unit for 100 psi oil pressure gauge.  For use with Short Sweep Electric Oil Pressure Gauges. 1/8" NPT Male Thread. Includes 1/4" NPT Adapter fitting.

  • Classic Instruments Gauge Set Dash Assembly, 1967-68 Chevy Camaro
    Classic Instruments Gauge Set Dash Assembly, 1967-68 Chevy Camaro
    x
                Classic Instruments '67-'68 Camaro Package gauge  sets dress your classic muscle with modern technology and authentic  looks. Classic combines their 5 in. SpeedTachular and Quad gauges in a  premium OEM reproduction dash bezel to provide you and your Camaro with  all of the accurate data that you need for the roads ahead! This package  is ready to bolt in, come complete with instrument harnesses, and  feature black aluminum bezels, real curved glass, and LED turn signals.  Give your first-generation Camaro or Firebird back its original look,  but with updated precision--add Classic Instruments '67-'68 F-Body  Package gauge sets to your American classic. 
    • Black "Velocity" face design - Blk
    • Black & Green "G-Stock" face design - Gstk
    • For 67-68 Camaro and Firebird
    • Set includes mounting face bezel, pre-assembled bracketry, pre wired, t/s, high beam installed
    • Standard GM sender pack included
    • Fuel level gauge pre-programmed 0-90 ohm to allow stock fuel tank sender to be used
    • No fuel sender included

    Classic Instruments Installation Manual (PDF)

  • Omega Kustom 12085 White Face 5-Gauge Set, Electric Speedometer, 4-3/8
    Omega Kustom 12085 White Face 5-Gauge Set, Electric Speedometer, 4-3/8
    x
                

    Omega Kustom Instruments produces the most advanced speedometers and auxilary gauges available anywhere. All of Omega Kustom’s instruments have the finest movements available today and the latest lighting technology. Each gauge in the kit is surrounded by polished stainless steel bezels and real glass lenses.

    Each Kool White Series set includes:

    • 4-3/8" Speedometer (electric w/ GM style sender)
    • 2-1/16" Fuel Level (w/ sender)
    • 2-1/16" Water Temp (electric w/ sender)
    • 2-1/16" Oil Pressure (electric w/ sender)
    • 2-1/16" Voltmeter

    Gauge Set Installation Instructions (PDF)

    Gauge Mounting Information (PDF)

  • Universal Round Face Fiberglass Overhead Console
    Universal Round Face Fiberglass Overhead Console
    x
                With these do-it-yourself interior components there's no limit to the  creative uses you'll find! These fiberglass overhead consoles allow you  to customize your street rod's interior to suit your style. 
    • Fiberglass construction
    • Overhead console with rounded face
    • Black gel coat
    • Trim as desired for radio or other components
Goto Previous PagePrevious Page
1 2 3 4 5 ... 20