Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Muscle Car Body, Interior, Gauges At Speedway Motors

There is no denying that muscle cars are the hottest rides on the street right now. Speedway Motors has the high performance muscle car parts to take you back to the '60s and '70s! Whether you run a Chevy, Ford or Mopar, you can find the right stuff for it here! Similar to your muscle car, Speedway Motors leaves our competitors in the dust when it comes to prices and selection.

Featured Products
Dynamat 10455 Xtreme Bulk Pack, Cut-to-Fit Thermal and Sound Insulation
Dynamat 10455 Xtreme Bulk Pack, Cut-to-Fit Thermal and Sound Insulation
x
            

Reduce road noise and vibration while making your stereo sound twice as good fast with Dynamat. By first laying down a layer of Dynamat Xtreme, you will make your car quiet and cooler. Add another layer of Dynaliner and you will make it even cooler. Or a layer of Dynapad and make it quieter. A Dyna-Roller will make installation easy. 

Kit contains nine 18" x 32" pieces (36 square feet) of Dynamat Xtreme (.067" thick) for rear decks, doors, floors and trunk floors. Unlike Dynamat Original, Dynamat Xtreme is also recommended for trunk lids, roofs, quarter panels, under-hood installations and multi-purpose use.

Simply measure your application to order the necessary amount. This product dramatically cuts heat and noise from inside the vehicle for more enjoyable cruising and every day driving.

  • Use to get more bass, more music, lower road noise and better sound
  • Kit contains (9) nine 18" x 32" pieces (36 square feet)
  • Simply measure and cut to fit your application

Dynamat Information Sheet (PDF)

Dynamat Tech Spec Sheet (PDF)

Dynamat 10465 Xtreme Mega Pack
$399.99
Product Rating: 4.50 Stars
Dynamat 10465 Xtreme Mega Pack
x
            

You may not be Chip Foose, but you can use the same Dynamat products Chip does. By first laying down a layer of Dynamat Xtreme, you will make your car quiet and cooler. Add another layer of Dynaliner and you will make it even cooler. Or a layer of Dynapad and make it quieter. A Dyna-Roller will make installation easy. 

This industrial-sized Mega Pak contains nine 24" x 48" flat sheets of Dynamat Xtreme for a total of 72 sq. ft. For complete coverage on rear decks, doors, floors and trunks.

Dynamat Mega Pak Contents: (9) 24"x 48" (609mm x 1219mm) sheets of Dynamat Xtreme and is .067 thick.

Application: Use on rear decks, doors, floors and the trunk to get more bass, more music, lower road noise and better sound. Create a solid, quiet luxury-car feel.

Dynamat Information Sheet

Dynamat Tech Spec Sheet 

Speedway Universal 20 Circuit Wiring Harness
Speedway Universal 20 Circuit Wiring Harness
x
            Whether you're building an option loaded car or just want to have extra circuits available for future updates, this harness is perfect and makes any job painless. Compact 5-1/2"L x 4-1/2"W x 3-1/4"H  fuse block holds 18 standard push-in fuses and can be mounted almost anywhere. 

Each high temperature wire is color coded and labeled every six inches. Also includes GM type steering column connectors. To keep costs down and the quality high, this harness does not include any switches, light sockets or plugs that you would normally already have.

  • Harness has 20 circuits, of which 18 are fused
  • Taillight leads measure 17' long
  • Includes plug for GM column, headlight switch, dimmer switch, and signal flashers

Wiring Harness Installation Instructions (PDF)

Speedway 6 Gauge Set
$209.99
Product Rating: 5.00 Stars
Speedway 6 Gauge Set
x
            
  • Stainless steel bezel
  • Backlit white face
  • Includes:
    • 3-3/8” Mechanical Speedometer       
    • 2-1/16” gauges
    • Six gauge set includes 3 3/8” electric tach as well
  • Mechanical oil pressure gauge and line kit
  • Voltmeter
  • Mechanical water temp gauge
  • Fuel gauge and sender
  • Tachometer NOT for use with solid core wires
  • Tachometer MUST be used with a resistor core wire wire and plugs
  • Repacement light socket assembly available #s 910-65075 & 910-65071

"Muscle Car, Body" Page 1 of 20

  • Rubber GM Transmission Cushion
    Rubber GM Transmission Cushion
    x
                

    OEM-style rubber transmission cushion for many '58-'82 GM transmissions including TH350 auto, Muncie, Saginaw, and others.

    • Meets or exceeds OEM specifications 
    • Rubber formulation provides abrasion resistance and aging stability
    • Tough, hardened steel plate & inserts
    • Chemlock® bonding agent ensures superior rubber-to-metal bond
  • Speedway 5 Gauge Set
    $159.99
    Speedway 5 Gauge Set
    x
                
    • Stainless steel bezel
    • Backlit white face
    • Includes:
      • 3-3/8” Mechanical Speedometer       
      • 2-1/16” gauges
    • Mechanical oil pressure gauge and line kit
    • Voltmeter
    • Mechanical water temp gauge
    • Fuel gauge and sender
    • Replacement light socket assembly available #s 910-65075 & 910-65071
  • Tubular Transmission Mount with 2 Inch Drop
    Tubular Transmission Mount with 2 Inch Drop
    x
                

    Universal rear transmission mounts and heavy duty tube crossmember. Fit most GM, Ford, and Mopar manual and auto transmissions. Black powder coated finish. Crossmember must be welded directly into frame or to 3 hole mounting flanges for bolt-in application. Fits frames up to 38" wide.

     

    Note: May require re-drilling of the mount holes when used with Ford C4/C6 trans cushion 910-18017.

  • DEi 050501 Floor and Tunnel Shield II, Heat and Sound Insulation, 2 Ft. x 21 Inch
    DEi 050501 Floor and Tunnel Shield II, Heat and Sound Insulation, 2 Ft. x 21 Inch
    x
                

    Designed to provide the best possible heat protection in areas where high temperatures are always present and problematic, Floor & Tunnel Shield II limits heat transfer on fire walls, transmission tunnels, floor boards, fuel cells and other areas where heat is an issue.  Floor & Tunnel Shield II provides excellent light weight thermal protection, acts as a guard against track and road debris, and provides sound deadening as well.

    Constructed with an embossed 10 mil aluminum face bonded to 1/8” composite glass-fiber core and backed with a high temp super strong pressure sensitive backing, Floor & Tunnel Shield II withstands up to 1750°F of direct continuous heat. The adhesive side holds past 450°F. Its improved multifaceted modern aluminum surface offers improved reflectivity and rigidity and allows for ease of installation. At only 3/16” thick, this product can be shaped and trimmed for a custom fit and is ideal for minimal clearance areas.

    With a unique and patented finely woven glass-fiber backing, Floor & Tunnel Shield II is the easiest, most cost effective way to control thermal transfer while protecting expensive components and vehicle occupants from extreme heat situations and sound.

    Floor & Tunnel Shield II can be used on any number of surfaces including, metal, aluminum, carbon fiber, plastic, and more. Multiple uses include: fire walls, under hoods, transmission tunnels, fl

  • Auto Meter 3357 Transmission Temperature Gauge
    Auto Meter 3357 Transmission Temperature Gauge
    x
                

    Sport Comp temperature gauge features air-core meter movement with a 2-1/16" O.D. Temperature meter includes 1/8" NPT sender with 3/8" NPT and 1/2" NPT adapter fittings.

    If mounting temperature sender in a steel pan, use bung 617-6701. Aluminum pans use bung 617-6801.

  • Adjustable Seat Riser
    $39.99
    Adjustable Seat Riser
    x
                
    • Cadmium plated steel
    • Sold in a set of 2 pairs
    • Three mounting hole options to adjust height
  • Stewart Warner 82310 Deluxe Ammeter Gauge, 2-1/16 Inch, 30-0-30 Amps
    Stewart Warner 82310 Deluxe Ammeter Gauge, 2-1/16 Inch, 30-0-30 Amps
    x
                Stewart Warner Deluxe 2-1⁄16" diameter ammeter gauges feature a black face, white letters and chrome bezel. A 12 volt light is included.
            
  • Auto Meter 2268 LS Series Oil Pressure Sender Adapter
    Auto Meter 2268 LS Series Oil Pressure Sender Adapter
    x
                

    This LS Series oil pressure sender fitting allows your aftermarket 1/8" NPT oil pressure sending unit to be installed in place of the OEM oil pressure sender.

    When installing aftermarket gauges, the OEM oil pressure sender is not required by the PCM and may be replaced by the aftermarket sender of your choice.

  • Hood Saver Protective Clear Hood and Body Tape, 12 Ft. Roll
    Hood Saver Protective Clear Hood and Body Tape, 12 Ft. Roll
    x
                

    Hood Saver is the world's finest transparent protective tape. This multi-purpose, waterproof super clear tape protects painted body parts and chrome from rock chips, tar and bugs. Hood Saver tape is easy to apply and remove. Provides an invisible protective film that is safe for all painted surfaces.

    Comes in a 12 ft long roll that is 5" wide.

  • Body Savers, .433 Inch Hole, 10/Bag
    Body Savers, .433 Inch Hole, 10/Bag
    x
                
    • Extend the life of your fiberglass body parts by eliminating ovaling
    • Mount using 1/8" rivets
    • 430 Stainless steel 
    • .433" diameter
    • Pack of 10
  • Replacement Lap Seat Belts
    $14.99
    Product Rating: 4.62 Stars
    Replacement Lap Seat Belts
    x
                Before you floor it...BUCKLE UP! These replacement seat belts will allow you to upgrade your car to a modern lap seat belt. Handy push button buckle is attached to 1-7/8" wide belt. This seatbelt allows the mounting tabs to be installed at different distances from the buckle and still allows the buckle to be positioned at a place (over the wearers' midsection) of the installers' choosing. 74" long to fit most applications. Black.

    Meets DOT and federal standards.

    910-72050 Instructions (PDF)

  • HushMat Ultra Floor/Dash Kit-Thermal & Sound Insulation
    HushMat Ultra Floor/Dash Kit-Thermal & Sound Insulation
    x
                Please view the product's page for more information
            
  • Auto Meter 2301 3-3/4 Inch 8000 RPM Tach, Chrome
    Auto Meter 2301 3-3/4 Inch 8000 RPM Tach, Chrome
    x
                

    These 3-3/4" diameter Autogage Series tachs by Auto Meter have a 8000 RPM range and include a backlight. Also includes a pedestal mount which can be mouted to your steering column or any flat surface. Operates on 4, 6, or 8 cylinder engines with points, electronic, and most 12V high performance racing ignitions. 

    Auto Meter Tach Application Chart (GIF)

    Tach Wiring Guide (GIF)

    3-3/4" Tachometer Installation Instructions (PDF)

  • Longacre 50888 Air Density Gauge
    Longacre 50888 Air Density Gauge
    x
                

    Get precise carb jetting every race! This gauge from Longacre helps you set air/fuel ratios to compensate for changes in barometric pressure and air temperature. As air density changes with weather conditions, you should rejet your carb to keep to horsepower and sharp response.

    Comes complete with case and jetting chart. 2-1/4" gauge face, 2-7/8" bezel O.D.

    Cannot ship by air.

    Air Density Gauge Installation Instructions

  • Clip-In Conversion Kit
    $19.99
    Product Rating: 4.00 Stars
    Clip-In Conversion Kit
    x
                

    Convert your harness from bolt-in to clip-in with this kit. All heavy duty hardware and snap hook. Two bolts, two washers, two clips.

    • Shank diameter is .434 or 7/16 X 20 threads per inch
    • Shank thread length is approximately 1 5/8"
    • Overall length including the eye is 3 1/8"
    • Washer diameter is 2 1/2" with 7/16" hole
    • Fits 2 inch wide belts

     

  • Speedway Universal 20 Circuit Wiring Harness
    Speedway Universal 20 Circuit Wiring Harness
    x
                Whether you're building an option loaded car or just want to have extra circuits available for future updates, this harness is perfect and makes any job painless. Compact 5-1/2"L x 4-1/2"W x 3-1/4"H  fuse block holds 18 standard push-in fuses and can be mounted almost anywhere. 

    Each high temperature wire is color coded and labeled every six inches. Also includes GM type steering column connectors. To keep costs down and the quality high, this harness does not include any switches, light sockets or plugs that you would normally already have.

    • Harness has 20 circuits, of which 18 are fused
    • Taillight leads measure 17' long
    • Includes plug for GM column, headlight switch, dimmer switch, and signal flashers

    Wiring Harness Installation Instructions (PDF)

  • Small Block Ford Crossmember Motor Mount
    Small Block Ford Crossmember Motor Mount
    x
                Universal mount allows 260-289-302-351W S/B Fords and 1970-1974 Cleveland engines with front sump oil pan to be installed into most frames up to 38" wide. Cut for frame width, then bolt or weld in.   

    Note: We've found a lot of variation in width of Ford blocks. Bolt the cushion to the block first to get proper width measurement. Mounts are not returnable once they've been altered or installed!

  • Speedway Liquid Filled Fuel Pressure Gauge
    Speedway Liquid Filled Fuel Pressure Gauge
    x
                

    High quality, liquid-filled stainless steel fuel pressue gauge for remote mounting.

    • 0-15 psi
    • 1-3/4" face
    • 1/8" NPT connection

    910-11852 Instructions (PDF)

  • 1949-1964 Early Chevy Car Interior Window Hand Cranks
    1949-1964 Early Chevy Car Interior Window Hand Cranks
    x
                

    These reproduction handles and cranks are what you need to finish up your pride and joy. They feature a beautiful chrome finish, classic styling, and secure around window regulator with original style retaining clip.

    • Chrome Side Window Crank
    • 1949-60 Full Size Passenger Car (Exclusive 1958 Impala)
    • 1961-64 Biscayne
  • Speedway 6 Gauge Set
    $209.99
    Product Rating: 5.00 Stars
    Speedway 6 Gauge Set
    x
                
    • Stainless steel bezel
    • Backlit white face
    • Includes:
      • 3-3/8” Mechanical Speedometer       
      • 2-1/16” gauges
      • Six gauge set includes 3 3/8” electric tach as well
    • Mechanical oil pressure gauge and line kit
    • Voltmeter
    • Mechanical water temp gauge
    • Fuel gauge and sender
    • Tachometer NOT for use with solid core wires
    • Tachometer MUST be used with a resistor core wire wire and plugs
    • Repacement light socket assembly available #s 910-65075 & 910-65071
  • Warmseats Seat Heater, Waterproof Orange Unit
    Warmseats Seat Heater, Waterproof Orange Unit
    x
                

    Perfect for a roadster or any car without a heater.  These state of the art seat heaters are OEM applications.  Easy to install heaters fit between the foam and upholstery of the seats bottom and back.  The pre-wired heater has a Hi/Lo/Off switch and only draws 3-1/2 amps.  You will need one heater for each vehicle occupant.  12 volt.

  • Electric Trunk Lift Kit
    $159.99
    Product Rating: 5.00 Stars
    Electric Trunk Lift Kit
    x
                

    It's cool to open your trunk with just the flip of a switch! This kit includes the motor, gear box, mounting kit, switch and instructions. Must be used with existing trunk hinges.

    • Primary arm is 8-1/2" long
    • Secondary arm is 6" long center to center of pivot point
    • Shaft with arm protrudes 2-1/2" from main body
    • Total travel of the arm is 13" (measured at knee pivot)
    • Overall dimensions with flange, but not including arm, are 10-1/2" x 9-1/16" x 1-3/4" thick
    • The main body without flange for mounting is 8-1/2" x 9-1/16" x 1-3/4" thick

    Mounting flange on arm is 1" from center to mounting surface 

    Max working capacity is approximately 61 pounds. Does not have a limit switch up or down. 

    Trunk Lift Kit Installation Instructions (pdf) 

  • Speedway Fender Cover
    $14.99
    $16.99
    Product Rating: 4.83 Stars
    Speedway Fender Cover
    x
                Protect your fenders. Pressure laminated, one piece vinyl construction. Back is a resilient, embossed rubber that is resistant to gasoline, grease and other solvents. Big size 40" x 26".
            
  • 1953-1964 Early Chevy Interior Vent Window Hand Cranks
    1953-1964 Early Chevy Interior Vent Window Hand Cranks
    x
                

    These reproduction handles and cranks are what you need to finish up your pride and joy. They feature a beautiful chrome finish, classic styling, and secure around window regulator with original style retaining clip.

    • Chrome Vent Window Crank
    • 1953-60 Full Size Passenger Car (Exclusive 1958 Impala)
    • 1961-64 Biscayne

     

  • Lokar 0401024 6-Position Adjustable Hood Prop, Polished
    Lokar 0401024 6-Position Adjustable Hood Prop, Polished
    x
                

    Constructed of high quality billet aluminum and stainless steel, this 6 position Adjustable-Level Hood and Trunk Prop will offer great looks as well as functionality to your ride.  When the hood or trunk is raised, the Hood and Trunk Prop will automatically lock itself into position.  This eliminates the need for two hands when opening your hood or trunk.  A quick release allows the hood to be opened to its max for easy engine access.  Each level of the six-level prop increases the opening of the hood or trunk by approximately 6 inches.

    Collapsed:  14"

    Extended:  19-3/4"

    Level Spacing:  1-1/8"

    491-40102 Instructions (PDF)

  • Lokar HR-1100U Hood Release Cable Kit, Black Housing
    Lokar HR-1100U Hood Release Cable Kit, Black Housing
    x
                

    This kit comes complete with billet aluminum handle assembly and cables. The cables are "U-Cut-to-Fit", designed with specially extruded liner for extended life of the cable, with billet aluminum fittings and stainless steel inner wire. Hood release kit includes aluminum firewall fittings and cable stop. The outer housing is 18 inches inside the vehicle and 6 feet under the hood. The inner wire is 9 feet long. Requires cable-operated latches.

    • Comes complete with billet aluminum handle assembly and cables
    • Specially extruded liner for extended life of the cable
    • Billet aluminum fittings and stainless steel inner wire
    • Includes aluminum firewall fittings and cable stop
    • Outer housing is 18 inches inside the vehicle and 6 feet under the hood
    • Inner wire is 9 feet long
    • Requires cable-operated latches
  • Stewart Warner 82303 Deluxe 2-1/16 In Elec Fuel Level Gauge-240/33 Ohm
    Stewart Warner 82303 Deluxe 2-1/16 In Elec Fuel Level Gauge-240/33 Ohm
    x
                

    Stewart Warner Deluxe Series gauges feature black faces with white lettering, polished stainless steel bezels and back lighting for night time visibility.

    Individual Deluxe Series gauges do not come with sending units.

    • 12 Volt
    • 2-1/16" O.D.
    • Electric
    • Lighted back
    • Stainless bezel
    • Black face
    • Requires sender, (sold separately)

    Note: This gauge requires a sending unit operating from 33-240 ohms. Most GM senders are 0-90 ohms and will not operate the gauge correctly.

  • Aluminized Heat and Noise Insulation Shield, 2-Ply
    Aluminized Heat and Noise Insulation Shield, 2-Ply
    x
                

    Aluminized heat shield is constructed of two layers of 99.5% pure grade industrial aluminum, laminated to 3/8" fiber tech padding to achieve highest reflection of radiant heat and sound deadening. 

    • Insulates against heat, noise and cold 
    • Mold and mildew proof
    • Fire retardent
    • Reflects 97% of infrared energy
    • Fiberglass reinforced
    • Double-sided aluminum backing
    • 4' x 6' sheet
  • Heidts PX-325 1964-66 Mustang Inner Fender Panels
    Heidts PX-325 1964-66 Mustang Inner Fender Panels
    x
                

    These stamped steel inner fender panels are replacements for 1964-66 Ford Mustangs with Mustang II style front suspension.  They feature a smooth surface finish with no bead rolls.

    • Stamped steel
    • 1964-66 Ford Mustangs with Mustang II style front suspension
    • Smooth surface with no bead rolls
    • Hardware included

     

  • Classic Instruments Shift Indicator for 3-Speed Auto, 1955-56 Chevy
    Classic Instruments Shift Indicator for 3-Speed Auto, 1955-56 Chevy
    x
                These shift indicators are the perfect companion to go with Bel Era & Bel Era II gauge packages. 
    • '55-'56 Chevy
    • Shift indicator
    • For 3 speed automatic applications
    • 2-1/8"
    • Available in white, black, gray, or tan
  • Docs Kustom 930132 Omega Clock, 2-1/16, Black Face
    Docs Kustom 930132 Omega Clock, 2-1/16, Black Face
    x
                

    Made in the USA. Stainless steel bezels, glass lens, precision movements and adjustable brackets. These gauges have panel lights. Has a 3 year warranty. 

    Gauge Mounting Information (PDF)

  • DEi 050220 Boom Mat Spray On Sound Deadening, 18 oz. Can
    DEi 050220 Boom Mat Spray On Sound Deadening, 18 oz. Can
    x
                
    Reduce unwanted road noise and deaden vibrations in hard to reach places with Boom Mat's new Spray On sound deadener. Works perfect for trunk interiors, fender wells, undercarriage, body panels, rear quarters, inside door panels, and many more. Boom Mat Spray On also works as a thermal barrier to insulate against unwanted heat. Will eliminate any unwanted sound, vibration, or heat in any vehicle!
    • Reduce unwanted road noise and vibration
    • Won't crack or chip
    • Can be applied in multiple layers
    • Helps prevent rust
    • Paintable in 6 hours
    • Single can will cover approximately 20 sq. ft.
    • Handles temperatures up to 300 F
  • Garage Sale - Carl Edwards Hitch Cover
    Garage Sale
    Garage Sale - Carl Edwards Hitch Cover
    x
                

    Whether you're tailgating at the races or the big game, or simply hanging out at your favorite garage, you'll always have a bottle opener handy with one of these custom hitch covers.

    Designed to fit in standard Class III trailer hitch receivers, these covers are a fun way to pop the top off your favorite bottled beverages.

     

    This is garage sale priced because it has been discontinued. 

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

  • Omega Kustom 911053 White 5-Gauge Set, Mechanical Speedometer, 3-3/8
    Omega Kustom 911053 White 5-Gauge Set, Mechanical Speedometer, 3-3/8
    x
                

    These Omega Kustom Kool White Series gauges are made in the good ol' USA and feature stainless steel bezels, glass lens, precision movements, and adjustable brackets. These five gauge sets have a 3-3/8"  mechanical speedometer which uses the standard 5/8"-18 GM style speedometer cable connection and 2-1/16" fuel level, volt, oil pressure and water temperature gauges.

    Each set includes:

    • Speedometer (mechanical)
    • Fuel Level (with sender)
    • Water Temp (electric w/ sender)
    • Oil Pressure (electric w/ sender)
    • Voltmeter

    Omega 5-Gauge Set Installation Instructions (PDF)

    Gauge Mounting Information (PDF)

  • Omega Kustom OK-21053 Tan 5-Gauge Set, Mechanical Speedometer, 3-3/8
    Omega Kustom OK-21053 Tan 5-Gauge Set, Mechanical Speedometer, 3-3/8
    x
                

    These Omega Kustom Timeless Tan Series gauges are made in the good ol' USA and feature stainless steel bezels, glass lens, precision movements, and adjustable brackets. These five gauge sets have a 3-3/8"  mechanical speedometer which uses the standard 5/8"-18 GM style speedometer cable connection and 2-1/16" fuel level, volt, oil pressure and water temperature gauges.

    Each set includes:

    • Speedometer (mechanical)
    • Fuel Level (with sender)
    • Water Temp (electric w/ sender)
    • Oil Pressure (electric w/ sender)
    • Voltmeter

    Docs Kustom 5-Gauge Set Installation Instructions (PDF)

    Gauge Mounting Information (PDF)

  • Lift Latch Lap Belt
    $24.99
    Product Rating: 4.59 Stars
    Lift Latch Lap Belt
    x
                Seat belts in six popular colors. Chrome lift latch with  standard belt.  Red, black, maroon, gray, dark blue, or tan.   Lap belts adjustable from 60" to 74". DOT approved. 

    Includes 1.5" long mounting bolts and hardware. These are 1-13/16" wide.
  • Dynamat 10455 Xtreme Bulk Pack, Cut-to-Fit Thermal and Sound Insulation
    Dynamat 10455 Xtreme Bulk Pack, Cut-to-Fit Thermal and Sound Insulation
    x
                

    Reduce road noise and vibration while making your stereo sound twice as good fast with Dynamat. By first laying down a layer of Dynamat Xtreme, you will make your car quiet and cooler. Add another layer of Dynaliner and you will make it even cooler. Or a layer of Dynapad and make it quieter. A Dyna-Roller will make installation easy. 

    Kit contains nine 18" x 32" pieces (36 square feet) of Dynamat Xtreme (.067" thick) for rear decks, doors, floors and trunk floors. Unlike Dynamat Original, Dynamat Xtreme is also recommended for trunk lids, roofs, quarter panels, under-hood installations and multi-purpose use.

    Simply measure your application to order the necessary amount. This product dramatically cuts heat and noise from inside the vehicle for more enjoyable cruising and every day driving.

    • Use to get more bass, more music, lower road noise and better sound
    • Kit contains (9) nine 18" x 32" pieces (36 square feet)
    • Simply measure and cut to fit your application

    Dynamat Information Sheet (PDF)

    Dynamat Tech Spec Sheet (PDF)

  • Classic Instruments MT-51 Chrome Tach Cup
    Classic Instruments MT-51 Chrome Tach Cup
    x
                

    Nothing says "hot rod" like a tachometer strapped to the steering column or perched atop the dash. This chrome-plated mounting cup accepts 3-3/8" tachs and will help you mount your tach where you want it.

    Works well with Classic Instruments and Omega 3-3/8" tachs.

  • Speedway Carbon Fiber Shark Hood Scoop
    $129.99
    $179.99
    Speedway Carbon Fiber Shark Hood Scoop
    x
                
    This carbon fiber hood scoop is ultra lightweight and strong. It is a great 1960's dragster style hood scoop which has a smooth bottom and can be configured for most carburetor combinations. This carbon fiber shark scoop measures at 24 inches long, 14.5 inches wide at front, 7 inches wide at rear, and 5.25 inches tall at the opening.
    • Made from genuine carbon fiber
    • Great '60's Dragster style    
    • Ultra lightweight and strong
    • 24" long, 14.5" wide at front, 7" wide at rear, 5.25" tall at opening
    • Smooth bottom can be configured for most carb combos
  • Stewart Warner 82306 2-1/16 Inch Deluxe Electric Water Temp Gauge
    Stewart Warner 82306 2-1/16 Inch Deluxe Electric Water Temp Gauge
    x
                Stewart Warner Deluxe Series gauges feature black faces with white lettering,  polished stainless steel bezels and back lighting for night time visibility.

    Individual Deluxe Series gauges do not come with sending units.

Goto Previous PagePrevious Page
1 2 3 4 5 ... 20