Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Muscle Car Battery, Starter, Alternator, Drives At Speedway Motors

The last thing you want to worry about when you're in your muscle car is whether or not it's going to start!  Let Speedway Motors help by providing some of the best muscle car batteries, starters and alternators in the business.  Bringing you top brands like Braille, Odyssey, Optima and Powermaster is just what we do at Speedway Motors.  Don't trust any old battery to power your muscle car, get the best at Speedway Motors.

"Muscle Car, Alternators and Components" Page 1 of 4

  • King Chrome GM One Wire Alternator, 100 Amp
    King Chrome GM One Wire Alternator, 100 Amp
    x
                

    Streamline engine compartment by eliminating excess wires with this 1-wire alternator.  It fit most GM applications and feature a beautiful chrome plated finish.  This one wire alternator simply needs hook up direct to the main battery lead or power source. The internal regulator picks up the available current and kicks the alternator into the charge mode at pre set voltage.

    • 100 amp, one-wire
    • Chrome plated finish
    • Quick, easy hook-up with supplied instructions
    • Attaches to all popular GM alternator brackets
  • Billet FM2121PC SBC Mid Mount Serpentine Conversion Kit, Keyway Shaft
    Billet FM2121PC SBC Mid Mount Serpentine Conversion Kit, Keyway Shaft
    x
                Please view the product's page for more information
            
  • Billet Specialties 13220 Tru Trac Serpentine Systems - Small Block Chevy
    Billet Specialties 13220 Tru Trac Serpentine Systems - Small Block Chevy
    x
                

    Billet Specialties Tru Trac serpentine systems for Small Block Chevy come complete with all attaching hardware and a comprehensive installation manual.

    • Polished 105 amp Powermaster 1-wire alternator
    • Cast finish Edelbrock reverse rotation water pump
    • Polished Sanden SD-7 compressor
    • Cast finish Maval power steering pump w/ AN fittings
    • All pulleys and brackets completely polished
    • Polished ARP 12-point stainless steel hardware
    • Goodyear Gatorback 6-rib serpentine belt

    Note: Requires the use of a remote power steering fluid reservoir. Vehicles that use front style motor mounts must be converted to side motor mounts when using the Tru Trac system.

    Small Block Chevy Serpentine System Installation Instructions (PDF)

    Get the correct pulleys for your application by learning which water pump you have as explained in our tech article. SBC - Short vs Long Water Pump.  

  • Chrome Steel Alternator Fan
    $12.99
    Chrome Steel Alternator Fan
    x
                

    This chrome plated alternator fan replaces the stock stamped steel fan necessary for cooling and gives the alternator a superior look. Fits most GM-Delco and Ford alternators.                      

  • Holley 21-2 LS Accessory Drive Bracket Installation Kit, Middle Align
    Holley 21-2 LS Accessory Drive Bracket Installation Kit, Middle Align
    x
                Please view the product's page for more information
            
  • Mallory Ignition 700 Ballast Resistor, .75-1.50 Ohm
    Mallory Ignition 700 Ballast Resistor, .75-1.50 Ohm
    x
                

    Stabilize coil current and prolong point life with Mallory ballast resistors. Computer-wound to ensure resistance value. Premium ceramic bodies provide maximum durability and superior heat transfer. Recommended when a new coil is installed.

    Mallory Unilite distributors include self-contained modules that require a ballast resistor, loom resistance wire, or internally resisted coil (ex. when using HyFire CD Ignitions). Using a heavy duty porcelain resistor and threaded terminal connectors, this resistor is rated at 200 watts and 0.75 (cold) – 1.5 (hot) ohms.

  • Alternator Wiring Harness
    $17.99
    Product Rating: 5.00 Stars
    Alternator Wiring Harness
    x
                If you're hanging a common internally regulated GM alternator on your  ride, you had better cough up the bucks for this problem solver. If you just wire-up  the alternator with any old "parts store" plug you will have a nasty little  surprise in store for you... the engine won't shut off! 

    When wired correctly the alternator will back feed juice to the ignition switch and keep your hot rod running. NOT COOL! This harness fixes that problem and will make you the hero of the drive-in.

    This adapter plug does not work with "one-wire" alternators. It is not needed. This adapter plug works with GM alternators with the built-in regulator, typically from 1971 or newer cars and trucks, like our 91367163 or 91067150.

  • Powermaster 170 Serpentine Alternator Drive Kit / Water Pump Drive System
    Powermaster 170 Serpentine Alternator Drive Kit / Water Pump Drive System
    x
                Convert your Powermaster 50 or 75 amp mini alternator to a 3 groove serpentine style belt. This system will not interfere with any other pulleys being used, as it mounts on the front of the water pump pulley. Comes complete with alternator and water pump pulleys and a 24" belt.
    • Includes 2 pulleys and 24" belt
    Note: Serpentine style belts are not approved for IMCA Northern Sport Mods
  • GM Alternator, 5/8 Inch Wide Alternator Belt Pulley, Plain
    GM Alternator, 5/8 Inch Wide Alternator Belt Pulley, Plain
    x
                

    So you've converted your Flathead-powered rod over to 12 volts and bolted a GM alternator in place. Now it's time to install the belt, but your engine pulley is 5/8" and the alternator is 1/2"!

    Don’t worry, Speedway has you covered. This alternator pulley allows the use of a 5/8" wide Flathead-style belt on GM externally regulated, SI and one-wire alternators.

  • Gates K060722 Belt for LS High Mount Alternator & P/S Bracket
    Gates K060722 Belt for LS High Mount Alternator & P/S Bracket
    x
                

    These Gates replacement belts are for use with our LS1/Vortec V8 high mount accessory brackets.

    • 395-60722 is for the alternator & power steering pump relocation bracket.
    • Effective Length (In.)     72.17
    • Outside Circumference (In.)   72.74
    • Top Width (In.)   .807
    • Top Width (mm)   20
  • Money Saver Alternator Dress Up Kit, Ford
    Money Saver Alternator Dress Up Kit, Ford
    x
                Money saver kit includes chrome housing, chrome bolts, chrome fan and chrome pulley.
            
  • Small Block Chevy Inboard Drive Kits, Alternator
    Small Block Chevy Inboard Drive Kits, Alternator
    x
                

    We all know what a pain it is to come up with a pulley, bracket, and belt combination to work on your small block Chevy engine. We have pre-engineered our package to include the nuts, bolts, polished billet aluminum brackets and belts to make this a simple installation. Each kit also includes a new short style aluminum water pump, aluminum pulleys, one wire chrome alternator and if chosen, a chrome A/C compressor. 

    Inboard (high) mount brackets for early cars.

    Alternator only kits include single groove pulleys.

    Note: S/B Chevy, short style water pump only.

  • Chrome Universal Alternator Bracket Arm
    Chrome Universal Alternator Bracket Arm
    x
                

    Chrome plated steel arm can be shortened and redrilled for specific application.

    • 13-1/4" from bottom mount hole to max adjustment
    • 10-5/8" from bottom mount hole to min adjustment

     

  • Tuff Stuff Silver Bullet One Wire Alternators - 100 Amp GM V-Belt Pulley
    Tuff Stuff Silver Bullet One Wire Alternators - 100 Amp GM V-Belt Pulley
    x
                

    The Silver Bullet 1-wire alternators are 100% new construction with a distinctive billet fan and pulley for good looks and increased performance. They are a one-wire hook-up with ultra low cut-in regulator which charges from a idle up to highway speeds.

    Fits GM mounts with V-belt pulley. 100 amp rating. Available in black powder coated or chrome finish.

  • Small Block Chevy Upper Alternator Bracket, Plain
    Small Block Chevy Upper Alternator Bracket, Plain
    x
                

    Positions alternator just above the intake, between passenger side valve cover and water outlet. Designed to mount GM "Delco" alternators on S/B Chevy V8 using '55-'68 short style water pumps.

    Alternator Bracket Illustration (GIF)

    916-67899 Instructions (PDF)

  • King Chrome One Wire Alternator, 65 Amp
    King Chrome One Wire Alternator, 65 Amp
    x
                Streamline engine compartment by eliminating excess wires with this 1-wire alternator. Quick, easy hook-up with supplied instructions. Attaches to all popular GM alternator brackets.
            
  • Ford Mount One Wire Alternator, Chrome
    Ford Mount One Wire Alternator, Chrome
    x
                

    Ford-powered cars can now have chrome 1-wire alternator too! Delco style with 100 amp capacity with mounting bosses that fit nearly all Ford-type mounting brackets. Includes chrome single-groove v-belt pulley.

    • Replaces 1961 - 85 Small Case Alternators and 1986 - 93 Mustangs
    • Smooth Back (True 1 Wire)
    • No more messy wire harness
    • Bolts right up!
  • Small Block Chevy Chrome Alternator Base Brackets
    Small Block Chevy Chrome Alternator Base Brackets
    x
                

    Late 1950's and early 1960's S/B Chevys had the generator attached to the left exhaust manifold. With headers installed, our brackets are needed to reattach your generator/alternator. Bracket base attaches at #1 cylinder exhaust port and works in conjunction with slide bracket 720-9008.

    • Chrome plated steel
    • Requires slide bracket 720-9008
    • Mounts to driver side of engine
    • Not for use with stock exhaust manifolds
    • For '55-'68 S/B Chevy w/short water pumps

    Alternator Bracket Illustration (GIF)

  • Small Block Chevy Alternator Slide Bracket
    Small Block Chevy Alternator Slide Bracket
    x
                

    Late 1950's and early 1960's S/B Chevys had the generator attached to the left exhaust manifold. With headers installed, our brackets are needed to reattach your alternator. Slide bracket attaches at #1 cylinder exhaust port and works in conjunction with base bracket 720-9254.

    • Chrome plated steel
    • Requires base bracket 720-9254 & arm 910-67850
    • Mounts to driver side of engine
    • Not for use with original generators 
    • For '55-'68 S/B Chevy w/short water pumps

    Alternator Bracket Illustration (GIF)

  • American Autowire 500511 70 Amp Relay and Plug w/ 12 Inch Pigtail Only
    American Autowire 500511 70 Amp Relay and Plug w/ 12 Inch Pigtail Only
    x
                

    American Autowire 70 Amp Relay and Plug w/ 12 Inch Pigtail Only

  • Chrome Dual Goove Alternator Pulley
    Chrome Dual Goove Alternator Pulley
    x
                Chrome plated steel pulley for GM or Ford alternators. Pulley works with 3/8" wide V-belts.
            
  • GM Chrome One Wire Alternator, 60 Amp
    GM Chrome One Wire Alternator, 60 Amp
    x
                

    Streamline engine compartment by eliminating excess wires with this 1-wire alternator.  They fit most GM applications and feature a beautiful chrome plated finish.  This one wire alternator simply needs hook up direct to the main battery lead or power source. The internal regulator picks up the available current and kicks the alternator into the charge mode at pre set voltage.  High output 60 amp 1-wire chrome alternator.

    • High output 60 amp
    • 1-wire alternator
    • Chrome finish
    • Quick, easy hook-up with supplied instructions
    • Attaches to all popular GM alternator brackets
  • Small Block Chevy Upper Alternator Bracket, Chrome
    Small Block Chevy Upper Alternator Bracket, Chrome
    x
                

    Positions alternator just above the intake, between passenger side valve cover and water outlet. Designed to mount GM "Delco" alternators on S/B Chevy V8 using '55-'68 short style water pumps.

    Alternator Bracket Illustration (GIF)

    916-67905 Instructions (PDF)

  • Small Block Chevy Low Mount Alternator Bracket, Chrome
    Small Block Chevy Low Mount Alternator Bracket, Chrome
    x
                

    These low mount alternator brackets mount common Delco alternators below the frost plug at the left front corner (driver's side) of your small block Chevy using bolt holes next to the timing cover. They are ideal for custom builds, street rods, and tube chassis cars that do not have power steering and work with short ('55-'68 S/B Chevy) water pumps. These brackets will support a standard full-size GM alternator which is sold separately.  Includes bracket, bolts and spacers. 

    • Mounts common Delco alternators below frost plug
    • Left front corner (driver's side) of engine
    • Bolt holes next to the timing cover
    • Includes bracket, bolts and spacers
    • For:
      • small block Chevy
      • 1955-1968 short water pumps

    Note: Watch for steering box clearance!

    Alternator Bracket Illustration (GIF)

  • Small Block Chevy Lower Alternator Bracket, Plain
    Small Block Chevy Lower Alternator Bracket, Plain
    x
                

    Mounts GM "Delco" style alternators beside oil pan at left front corner of your small block Chevy V8. Works with the short ('55-'68) water pump. Includes bracket and spacer.

    Note: Watch for steering box clearance!

    Alternator Bracket Illustration (GIF)

  • 1973-86 GM Chrome Alternator, Internal Regulator, 60 Amp
    1973-86 GM Chrome Alternator, Internal Regulator, 60 Amp
    x
                

    All-new high output 60 amp 1973-86 GM style 3-wire internally regulated chrome alternator.

  • Small Block Chevy Low Mount Alternator Bracket, Plain
    Small Block Chevy Low Mount Alternator Bracket, Plain
    x
                

    These low mount alternator brackets mount common Delco alternators below the frost plug at the left front corner (driver's side) of your small block Chevy using bolt holes next to the timing cover. They are ideal for custom builds, street rods, and tube chassis cars that do not have power steering and work with short ('55-'68 S/B Chevy) water pumps. These brackets will support a standard full-size GM alternator which is sold separately.  Includes bracket, bolts and spacers. 

    • Mounts common Delco alternators below frost plug
    • Left front corner (driver's side) of engine
    • Bolt holes next to the timing cover
    • Includes bracket, bolts and spacers
    • For:
      • small block Chevy
      • 1955-1968 short water pumps

    Note: Watch for steering box clearance!

    Alternator Bracket Illustration (GIF)

  • King Chrome 1969-Up GM Alternator, 63 Amp, 3-Wire, Internal Regulator
    King Chrome 1969-Up GM Alternator, 63 Amp, 3-Wire, Internal Regulator
    x
                

    These brand new alternators will fit most GM applications and feature a beautiful chrome plated finish.  The internal regulator picks up the available current and kicks the alternator into the charge mode at pre set voltage.  They are designed as replacements for 1969-Up GM vehicles. 

    • 63 amp, 3-wire
    • Chrome plated finish
    • 1969-Up GM applications
    • Quick, easy hook-up with supplied instructions
    • Attaches to all popular GM alternator brackets

     

  • Holley 20-131 R4 Compressor LS Accessory Drive AC, PS, Alt Bracket Kit
    Holley 20-131 R4 Compressor LS Accessory Drive AC, PS, Alt Bracket Kit
    x
                

    These accessory drive brackets from Holley are great when swapping a GM LS engine into a muscle car, truck, hot rod or other vehicle. These brackets were designed to deliver a factory style appearance, correct belt alignment, and factory stability.  Holley's kits supply the required brackets and hardware needed for installation.

    To determine correct application, these three easy steps will help get you going:

    • Step one is to determine your belt alignment based on your crank Pulley position on the engine you have.
    • Step two is to choose the Holley accessory drive brackets that you need (A/C, Alt & P/S or both).
    • Step three is to see which Holley installation kit your set–up requires to line up your accessories with your crank Pulley position. An application specific installation kit (part # 425211, 425212, or 425213) is REQUIRED for most applications.

    Note: When referring to guide links below, keep in mind that part numbers shown are MFG numbers without "425" prefix.

    Fitment and Required Components Guide for 20-131 Bracket Kit (PDF)  

    Assembly Instructions for Holley 20-131 Accessory Drive Kit (PDF)   

  • Bills Hot Rod Co. Power Steering Pump Brackets for Small Block Chevy
    Bills Hot Rod Co. Power Steering Pump Brackets for Small Block Chevy
    x
                

    Fabricated from 1/4" mild steel with stainless/chrome Allen head hardware. Simple installation; all brackets are pre-assembled. Drilling or tapping is not required. Attaches to the lower left front of the block using the two lower bolt holes located by the timing cover (the old front motor mount holes). The adjusting arm mounts to the lower water pump hole.

    • Mounts low on driver's side
    • Two positions for superior adjustability 
    • Works with short or long style water pumps
    • Use with GM Saginaw pumps with attached reservoir, "type 1" p.s. pumps
    • Works with stock steel or aluminum aftermarket pulleys
    • Choose black or chrome finish

    Power Steering Tech Questions/Tips (Link)

    Power Steering Application Tech Questions/Tips (Link)

  • Bills Hot Rod Co. Sanden or Sankyo 508 AC Brackets
    Bills Hot Rod Co. Sanden or Sankyo 508 AC Brackets
    x
                

    For S/B Chevy with short water pump. Fabricated from mild steel, with all stainless fasteners. Accepts Sanden or Sankyo #508 air conditioner unit.

    Simple installation. Attaches to accessory bolt holes on front face of head. Available in black or chrome.

     

     S/B Chevy Alternator Bracket Illustration

  • Bills Hot Rod Co. Big Block Chevy Power Steering Brackets
    Bills Hot Rod Co. Big Block Chevy Power Steering Brackets
    x
                

    Fabricated from 1/4" mild steel with stainless/chrome Allen head hardware. Simple installation; all brackets are pre-assembled. Drilling or tapping is not required. Attaches to the lower left front of the block using the two lower bolt holes located by the timing cover (the old front motor mount holes). The adjusting arm mounts to the lower water pump hole. Accepts stock GM Saginaw power steering pumps with attached reservoir.

    Available in chrome or black painted.

  • Powermaster 57297 GM 12SI 150 Amp Smooth Look Alternator, Black
    New
    Powermaster 57297 GM 12SI 150 Amp Smooth Look Alternator, Black
    x
                Please view the product's page for more information
            
  • Early Ford Powergen One Wire Alternator, 75 Amp
    Early Ford Powergen One Wire Alternator, 75 Amp
    x
                

    These Powermaster Powergens allow you to keep the authentic looks of a generator with the efficiency of a 1-wire alternator. They put out 75 amps maximum with 60 amps at idle and are a simple one wire design.

    Fits all 1951-1959 engines (except Flathead) and 1960-1964 V-8's. Choose plain or polished. 

    910-67167 Instructions (PDF)

  • Small Block Chevy Outboard Alternator Bracket
    Small Block Chevy Outboard Alternator Bracket
    x
                

    We all know what a pain it is to come up with a pulley, bracket, and belt combination to work on your small block Chevy engine. We have pre-engineered our package to include the nuts, bolts, and polished billet aluminum brackets to make this a simple installation.

     

    Outboard mount for fat fendered cars.


    Note: S/B Chevy, short style water pump only.  Not to be used in conjunction with power steering due to belt interference with the power steering pump.  

  • Small Block Chevy Black Alternator Bracket
    Small Block Chevy Black Alternator Bracket
    x
                

    These rugged, hi-tech aluminum alternator brackets feature a painted black finish. They attach to front of cylinder head of any Small Block Chevy with a short water pump. Mounting hardware is included.

    • Rugged, hi-tech aluminum bracket with a painted black finish.
    • Attaches to front of cylinder head of Small Block Chevy.
    • Mounting hardware included
    • Fully adjustable
    • For use with short water pump 
  • Billet FM2221PC BBC Mid Mount Serpentine Conversion Kit, Keyway Shaft
    Billet FM2221PC BBC Mid Mount Serpentine Conversion Kit, Keyway Shaft
    x
                Please view the product's page for more information
            
  • Big Block Chevy Lower Alternator Bracket, Chrome
    Big Block Chevy Lower Alternator Bracket, Chrome
    x
                

    Chrome plated steel bracket mounts Delco alternators beside oil pan at left front corner (driver side) of 396-454 big block Chevy V8s. Uses early front motor mount holes.

    • Works with the short water pump
    • Will NOT work with Speedway T-Bucket frames (too narrow)
    • Measures 10.3" to 12.3" from centerline of crankshaft to outside edge of alternator
  • Tuff Stuff Silver Bullet One Wire Alternator, 100 Amp Rating
    Tuff Stuff Silver Bullet One Wire Alternator, 100 Amp Rating
    x
                

    The Silver Bullet 1 wire alternators are 100% new construction with a distinctive billet fan and pulley for good looks and increased performance. They are a one-wire hook-up with ultra low cut-in regulator which charges from a idle up to highway speeds.

    Fits GM mounts with six groove serpentine pulley. 100 amp rating. Available in black powder coated or chrome finish.

  • Small Block Chevy Outboard Bracket Kit
    $199.99
    $219.99
    New
    Small Block Chevy Outboard Bracket Kit
    x
                

    We all know what a pain it is to come up with a pulley, bracket, and belt combination to work on your small block Chevy engine. We have pre-engineered our package to include the nuts, bolts, and polished billet aluminum brackets to make this a simple installation.

    Outboard mount for fat fendered cars.

Goto Previous PagePrevious Page
1 2 3 4