Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Filter

Page 1 of 50

Products

Air and Fuel Delivery

Shop Muscle Car Air & Fuel Delivery At Speedway Motors

Speedway Motors stocks all the best names in American muscle car carburetors and intake manifolds! Plus, we have a great selection of fuel cells and gas pedals, as well as electric and mechanical fuel pumps. Don't forget to let your engine breath with filters from K&N and R2C. Speedway can fuel your need for speed!

Featured Products
  • MSD 2922 Fuel Pump Return Kit
    $291.99
    MSD 2922 Fuel Pump Return Kit
    (Part #5472922)
    x
                If you plan to run a return line with your Atomic EFI system, this kit provides a regulator, 15 ft of 3/8" line and the fittings to assemble.

    Installation Instructions (PDF)

    • Regulator included
    • Ready to assemble
  • Open 4 Barrel Carburetor Base Gasket
    Open 4 Barrel Carburetor Base Gasket
    (Part #55054)
    x
                Open base gaskets.
            
  • Fragola 4919461-BL O-Ring Boss Carb Adapter, -8 AN to -8 AN, Short
    New
    Fragola 4919461-BL O-Ring Boss Carb Adapter, -8 AN to -8 AN, Short
    (Part #6174919461)
    x
                
    Fragola Performance is proud to offer this made in the USA, O-ring Boss carburetor adapter. This is just one of the many top quality fluid delivery products offered by Fragola.
    • -8 AN Male to 3/4"-16 (-8AN) port fitting
    • Fuel line adapter fitting
    • Black anodized finish
    • Made in the USA
  • Sure Seal O-Ring Air Cleaner Spacer
    From: $4.99
    Product Rating: 4.91 Stars
    Sure Seal O-Ring Air Cleaner Spacer
    (Part #91011063)
    x
                

    This unique sealing ring spacer has O-ring on the carburetor side to prevent dust from entering past the filter base. Also allows you to raise the filter up for additional clearance.

    Available in three heights: 1/2", 1" or 2".

  • Aluminum Fuel Line, 3/8 Inch O.D.
    From: $10.99
    Product Rating: 4.75 Stars
    Aluminum Fuel Line, 3/8 Inch O.D.
    (Part #91011430)
    x
                Where else can you buy aluminum fuel line in the size and length you need? This easy-to-flare and bend tubing will save weight and money. 
    • Use with tube nut couplers, sleeves and 37° flared AN fittings
    • Rated to 250 psi
    • Not recommended for high pressure (brake) applications
    • Available in 10 ft., 20 ft., or 30 ft. coils

    Learn more about flaring lines and how to select proper automotive fittings by reading our tech article. The Principles of Automotive Fittings.

  • Fuel Filter Mounting Bracket
    Fuel Filter Mounting Bracket
    (Part #910117)
    x
                

    These fuel filter mounting brackets are CNC machined aluminum. Available in 1-3/8", 1-1/2", or 1-3/4" round tubing.

    These brackets are designed to be used with our filters. Hole is 2" inner diameter. 

  • Demon 491978 Carb To -8 AN Fuel Line Fitting
    Demon 491978 Carb To -8 AN Fuel Line Fitting
    (Part #6172111)
    x
                

    AN 8 fitting for Demon carburetor.

     

  • Afco 4# Fuel Pressure Sending Unit (1/8 Inch Pipe)
    Afco 4# Fuel Pressure Sending Unit (1/8 Inch Pipe)
    (Part #10685284)
    x
                

    Afco 4# Fuel Pressure Sending Unit

    • 1/8 Inch Pipe

Filter

"Muscle Car, Air and Fuel Delivery" Page 1 of 50

Page 1 of 50

  • AFCO 10171 Bushing Kit w/ RH Threaded Female Rod End
    AFCO 10171 Bushing Kit w/ RH Threaded Female Rod End
    (Part #10610171)
    x
                AFCO Throttle Rod Components
            
  • Weiand 7530 Team G Chevy Small Block Manifold
    Weiand 7530 Team G Chevy Small Block Manifold
    (Part #8057530)
    x
                

    The Weiand Team G is a 360° single-plane, open plenum manifold developed for competition S/B Chevy V8s. Features an isolated plenum and isolated water cross-over to keep the incoming air/fuel charge cooler for improved power. Effective power range is 2800-7200 RPM.

    Square carburetor mounting flange.

    Chevy Small Block Team G Manifold Installation Instructions (PDF)

     

  • Tanks Inc. TM34H-T EFI Fuel Tank Kit, 1971-72 Buick Skylark
    Tanks Inc. TM34H-T EFI Fuel Tank Kit, 1971-72 Buick Skylark
    (Part #91076222)
    x
                

    These all-inlcusive EFI Ready steel fuel tanks from Tanks Inc. take the headache out of converting your classic to modern LS power.  Each kit comes complete with a high-flow (255 liters p/hr) in-tank Walbro pump that supports up to 630 hp.   Also included are a sending unit (Ohms will match the make/model/year application of tank), fill neck, and hose (if applicable).

    • 20 Gallon Capacity
    • Steel Construction
    • Powder Coated Finish
    • Sold Individually
    • Only offered with a GPA-4 pump
      • Made in the USA
      • Heavy 10 gauge no-warp mounting plate
      • 1/4" NPT Supply and Return Line
      • Barbed Vent Fitting
      • Oven brazed fittings
      • Up to 100 PSI
      • In-tank wire harness 
      • Genuine Walbro Fuel Pumps

    Fits:

    • 1971-1972 Buick Skylark ,GS, GS 455
  • MPD Racing 94-73800 BLACK Fuel Shut Off Valve for Fuel Filter, -12 AN
    MPD Racing 94-73800 BLACK Fuel Shut Off Valve for Fuel Filter, -12 AN
    (Part #546738)
    x
                Replacement fuel shut off valve for Speedway aluminum fuel filters. Has a -12 AN outlet with O-ring. Teflon sealed ball valve inside.
            
  • Aeromotive 18664 Stealth Fuel Cell, 15 Gallon
    Aeromotive 18664 Stealth Fuel Cell, 15 Gallon
    (Part #91018664)
    x
                

    Finally, a truly universal system that is built for street rods, drag racing, off-road, autocross, drifting and any other performance application you can think of! This complete unit has all the advantages of an in-tank fuel system; quiet cool operation, ideal fuel pump environments and a serious reduction in installation time and investment. In addition, this system eliminates the risk of fuel pump cavitation due to hard cornering, launching or braking thanks to innovative baffling built into each tank.

    • Includes Stealth 340 LPH in-tank fuel pump
    • Works with both carbureted and EFI systems
    • Return line provisions
    • Two AN8 vents with rollover valves
    • Universal 0-90 Ohm fuel level sender
    • Standard 12-bolt flush mount lid assembly
    • Natural aluminum finish
    • Ready to go simple installation

    Fuel Pump Flow Chart (GIF)

  • Edelbrock 1413 Performer 4 Barrel Carburetor, 800 CFM, Electric Choke
    Edelbrock 1413 Performer 4 Barrel Carburetor, 800 CFM, Electric Choke
    (Part #3251413)
    x
                

    Edelbrock Performer Series four barrel carbs have proven themselves to be easy to tune with great drivability. Whether you need to replace an aging stock carb or are looking for a performance carb to top off your hot rod, the Edelbrock Performer Series carbs are the best choice for performance and value. All Edelbrock products are proudly made in the U.S.A.

    Designed and calibrated for maximum street performance with most Performer RPM, RPM Air-Gap and Torker II manifolds and with Performer manifolds on large cubic-inch engines. Includes an electric choke and detailed instructions. Ford/Mopar throttle adapter arms sold separately.

    • Electric choke 
    • Smooth throttle response throughout the power band
    • Uses metering rods to transition between circuits - rods can be changed in seconds without carburetor removal or draining fuel
    • Float levels are factory set; adjustments are rarely needed
    • Change jets, adjust floats & replace needles/seats without draining fuel or removing carb
    • Lightweight all-aluminum body is compatible with gasohol and blended fuels
    • Includes both timed and full vacuum ports for ignition advance

    Edelbrock 800 CFM 4 Barrel Carburetor Installation Instructions (PDF)

     

  • Lokar XDBW-6004 Midnight Series Drive-by-Wire Aluminum Throttle Pedal
    Lokar XDBW-6004 Midnight Series Drive-by-Wire Aluminum Throttle Pedal
    (Part #491XDBW6004)
    x
                Lokar has partnered with Williams Controls the world leader in heavy duty electronic throttle pedals.
    Features:
    • The first programmable electronic throttle pedal (Drive- By- Wire) for the automotive aftermarket
    • Programmable Non-Contact (Solid State) hall effect sensor for most GM, Ford & Mopar applications
    • Splined pedal arm for versatile mounting
    • All metal construction; Aluminum and Stainless Steel
    • 3 times better performance over standard OEM pedals
    • Over 90 years of combined throttle pedal experience
    • Sensor programmed on pedal to optimize electrical output for quick throttle response (No pedal lag)
    • Brushed or black finish
  • Aeromotive 11140 340 Stealth Fuel Pump, Centered Inlet
    Aeromotive 11140 340 Stealth Fuel Pump, Centered Inlet
    (Part #91011140)
    x
                

    The Aeromotive 340 Stealth Fuel Pump is a high-output, in-tank, electric fuel pump that fits most popular EFI applications. It is a compact, lightweight pump that bolts into many existing hanger assemblies.

    What sets the 340 Stealth Pump apart is its superior flow throughout a wide pressure range. Compared to other popular aftermarket pumps, at 40 psi the 340 boasts more than 340 lph. That’s over 30% more flow, making it ideal for applications requiring more flow while retaining the factory lines and mounting provisions available in the OE configuration. The 340 is also perfect for use as a universal replacement for applications that require more flow to support forced air power adders such as turbo and supercharged applications.

    • Fits most vehicles where popular aftermarket pumps are applicable
    • Designed for in-tank use only
    • Can be used in carbureted or EFI applications
    • Turbine pump mechanism increases durability and can be used in pulse modulated applications

    910-11140 Instructions (PDF)

  • Lokar XSRK-4001 Black Stainless Steel Carburetor Bracket
    Lokar XSRK-4001 Black Stainless Steel Carburetor Bracket
    (Part #49104001)
    x
                

    Stainless bracket mounts to rear of Holley, Edelbrock, AFB, Quadrajet, Demon, and In-Line Dual Quads.  Design provides improved clearance on Edelbrock carbs. Design includes tension screw to prevent bracket from movement under extreme pressure on a kickdown cable, such as with a 700-R4 transmission.

    • Mounts to rear of Holley, Edelbrock, AFB, Quadrajet, Demon, and In-Line Dual Quads
    • Stainless steel
    • Improved clearance on Edelbrock carbs
    • Includes tension screw to prevent bracket movement under extreme pressure

    49104001 Installation Instructions (PDF) 

  • Lokar TRP-4005 Stainless Pontiac Tri-Power Throttle Cable Bracket Kit
    Lokar TRP-4005 Stainless Pontiac Tri-Power Throttle Cable Bracket Kit
    (Part #491TRP4005)
    x
                

    Designed for Rochester Tri-Power. Kit includes Stainless Steel Throttle Cable Bracket and Stainless Steel Springs.

    • Stainless bracket mounts under rear carburetor on Rochester 3-2 set-up.
    • Cables operate from center carburetor.
    • Stainless Bracket and Dual Stainless Springs are used to mount Lokar's Throttle Cable and Kickdown assemblies.
  • Waterman 935566D Dash Mount Fuel Shut Off Valve, -6 AN
    Waterman 935566D Dash Mount Fuel Shut Off Valve, -6 AN
    (Part #9109355661)
    x
                Dash mount is AN6 male with offset style handle. Fuel cell ball valve   mounts in plate. Required for many  Sprint cars. They are designed to be  plumbed inline and mount close to the driver.
    • Engineered specifically for sprint car applications
    • -6 AN male to male fuel shut off valve
    • Designed to be plumbed inline and mount close to the driver
  • Russell Performance 641605 LS/Hemi EFI Fuel System Retrofit Kit
    Russell Performance 641605 LS/Hemi EFI Fuel System Retrofit Kit
    (Part #325641605)
    x
                

    This fuel pump kit provides a complete electronic fuel system for GM LS-series and Chrysler 5.7 Hemi engine swaps in muscle cars, street rods and off-road vehicles. Kit features an Edelbrock EFI fuel pump, regulator/filter, relay, Russell Pro Flex hose, an assortment of silver and black AN hose end fittings, and all mounting hardware. When using with OEM fuel tank sending units, an additional adapter to -6 male AN is required.

    • For GM/Chevy LS and Chrysler 5.7 Hemi engine swaps into older non-EFI vehicles
    • Includes Edelbrock Electric Fuel Pump # 3594
    • Includes Edelbrock Fuel Pressure Regulator
    • Returnless Fuel System
    • Supports up to 450 HP
  • Lokar TCP-1000TPVU Polished Universal 36 Inch Vortec Throttle Cable
    Lokar TCP-1000TPVU Polished Universal 36 Inch Vortec Throttle Cable
    (Part #491TCP1000TPVU)
    x
                

    Looking for more shine in your engine compartment? Try Lokar's Polished Hi-Tech Throttle Cables. Lokar's polished cables are available in stainless steel braided housing or black housing. They are designed with a specially extruded liner for extended life of the cable – not to be confused with ordinary braided brake hose.

    • Cables are equipped with polished aluminum fittings and polished aluminum ferrule to eliminate fraying.
    • "U-Cut-to-Fit" outer housing is available in 24" or 36" lengths with a "U-Cut-to-Fit" stainless inner wire.
    • Clevis is designed without cotter pins or set screws.
    • Adapts to factory and aftermarket pedals.
    • Cables mount nicely with Lokar's array of Bracket and Return Springs (sold separately).
    • Kits complete with installation instructions.
    • Pair up with a Polished Kickdown
  • Lokar XTCB-40RJ1 Midnight Series 502 Ram Jet Throttle Cable Bracket
    Lokar XTCB-40RJ1 Midnight Series 502 Ram Jet Throttle Cable Bracket
    (Part #491XTCB40RJ1)
    x
                
    • Brackets fit the GM ramjet engine.
    • These brackets along with Lokar Throttle Cables will allow the ramjet to work properly in any vehicle.
    • When used with an automatic transmission, be sure to use the transmission specific Lokar Kickdown Cable.
    • Uses TC-1000RJ throttle cable.
  • Holley 0-80670 Avenger 670 CFM 4 Barrel Carburetor, Electric Choke
    Holley 0-80670 Avenger 670 CFM 4 Barrel Carburetor, Electric Choke
    (Part #42580670)
    x
                

    The Holley Street Avenger Model 4150 four barrel carb is the ultimate vacuum secondary street performance upgrade. This 4 barrel carb is street ready right out of the box and features a calibrated electric choke, air and fuel adjustments and built in fuel filters. There are clear sights for easy float adjustments, adjustable vacuum secondaries and four vacuum ports. Plus it has a million mile power valve, is 100% wet flow tested and includes fittings.

    • No Trouble quick change vacuum secondaries - up to 6% more acceleration or 5% better fuel economy with simple spring change (springs included) 
    • Vacuum secondaries allow use on wide variety of vehicles
    • Tuneable fuel metering system
    • Dual feed fuel inlet
    • 1 timed (spark) port, 2 full vacuum, and 1 PCV port
    • Ford A/T kickdown, does not work with A.O.D. transmissions
    • Calibrated for monster low-end torque, awesome acceleration, & unmatched top-end horsepower
    • Bolt on & go design
    • Electric choke

    Holley 670 CFM 4 Barrel Carburetor Installation Instructions (PDF)

  • OTB Gear 4660 Orbit Cast Spun Aluminum Air Cleaner
    New
    OTB Gear 4660 Orbit Cast Spun Aluminum Air Cleaner
    (Part #9104660)
    x
                

    This Orbit cast heavy aluminum spun air cleaner from OTB Gear has a truly unique look. The spun shell can be painted or clear coated.

    • Polished casting countersunk into heavy wall satin aluminum spinning
    • Outer shell can be painted or clear coated
    • Washable permanent filter
    • Fits standard 5" four bbl. Carb
    • Diameter 12" - height 4-1/2" 
    • Made in the USA

     

  • Edelbrock 5001 Small Block Chevy Torker II Intake Manifold
    Edelbrock 5001 Small Block Chevy Torker II Intake Manifold
    (Part #3255001)
    x
                

    Designed for 1955-86 high-performance 262-400 c.i.d. small-block Chevy V8s operating in the 2500-6500 RPM range. The Torker II is an updated version of original Torker offering better performance. Manifold accepts late-model waterneck, air-conditioning, alternator and H.E.I. distributor.

    Will fit Corvette and 1987 and later stock aluminum heads. Will NOT fit 1987 and later cast iron heads and will NOT cover port openings of Chevrolet Bowtie or LT1 heads.

    NOT intended for use on heavy vehicles (trucks, vans etc.).

    Torker II Intake Manifold Installation Instructions (PDF)

  • Speedway Aluminum Fuel Log for Demon Carburetor
    Speedway Aluminum Fuel Log for Demon Carburetor
    (Part #91011600)
    x
                

    Ensures adequate fuel pressure to carburetor and helps eliminate fuel starvation problems. Fuel pressure is regulated after carburetor has been supplied and not before. Must use return fuel line to take full advantage of benefits.

    Features AN8 inlet and two AN8 outlets.  Threaded 3/4" NPT (plugged) on back that can be used for a return line. Also has 1/8" NPT outlet for fuel pressure gauge, fittings sold separately. 

  • (3) 9 Super 7 Carbs on Small Block Chevy Edelbrock Vortec Intake, Chrome
    (3) 9 Super 7 Carbs on Small Block Chevy Edelbrock Vortec Intake, Chrome
    (Part #925123)
    x
                

    This kit uses the Edelbrock S/B Chevy '96-up Vortec-style 3x2 intake with 3-bolt carbs. It includes a progressive linkage to give you excellent driveability and economy, with power when you need it. It includes three Speedway 9 Super 7® carbs, the intake manifold, air cleaners, linkage kit, fuel block, fittings, and red fuel line. 

    Assembly required.

    9 Super 7® Linkage Instructions (PDF)

     

  • Speedway Holley Mechanical Fuel Pump Fuel Line Kit
    Speedway Holley Mechanical Fuel Pump Fuel Line Kit
    (Part #6174090)
    x
                

    This pump-to-carb fuel line kit will get you the -8 AN hose, hose end fittings and mechanical fuel pump fitting if required. Choose from push-on steel or aluminum fittings with blue hose, or aluminum fittings with stainless steel braided hose. Comes with -8 AN hose only.

    Fitting sizes listed indicate fuel pump outlet fitting size.

    Style Choice Guide:

    • ALU - aluminum fittings with blue hose
    • SS  - aluminum fittings with stainless hose
    • STL - steel fittings with blue hose 
Goto Previous PagePrevious Page
1 2 3 4 5 ... 50