Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop 1970-88 Monte Carlo At Speedway Motors

The first four generations of Chevy's Monte Carlo have been a favorite of auto enthusiasts and short track racers alike for years. This two door classic was one of Chevys best selling models and Speedway Motors is proud to carry a huge selection of Monte Carlo parts and accessories. From brake kits to headers, we've got all the Monte Carlo parts you need to keep your classic on the road and out of the garage.

"Muscle Car, 1970-88 Monte Carlo" Page 1 of 2

  • Hawk HB119A.594 Performance 1978-Up HPS Brake Pads, DTC-15
    Hawk HB119A.594 Performance 1978-Up HPS Brake Pads, DTC-15
    SKU-919119A
    x
                

    Get superior stopping power with Hawk Performance! Hawk Performance brake pads have been successful in virtually all forms of motorsports for over 16 years. This success helps Hawk Performance enjoy the benefits of the “Win on Sunday, Sell on Monday,” philosophy. Hawk is one of few brake pad manufacturers that can deliver on the promise, “Race Proven – Street Legal.”

    • Increased stopping power
    • High friction/torque hot or cold
    • Gentle on rotors
    • Extended pad life
    • Low dust
    • Virtually noise-free

    Tech Tip:  Only use full metallic pads on coated rotors.

    Sold as a set of 4, 1 set will be needed to outfit 2 calipers.

    Brake Pad Brand Guide (Link) 

    Learn how to properly Bed-In your brake pads by reading our tech article.  Bedding-In Brake Pad Procedure.

     

  • IMCA 1978-88 GM Metric Chassis 9 Inch Ford Axle Bracket Kit
    IMCA 1978-88 GM Metric Chassis 9 Inch Ford Axle Bracket Kit
    SKU-91095347
    x
                

    You can weld these brackets to your 9" Ford housing and install it in your 1978-88 GM Metric chassis. Includes upper and lower control arm mounts. Welding required. Designed for 3-1/2" axle tubes, but can be fit to 3" tubes.

  • AFCO 5-1/2 x 12 Inch Street Stock Rear Springs, 1973-88 GM Passenger
    AFCO 5-1/2 x 12 Inch Street Stock Rear Springs, 1973-88 GM Passenger
    SKU-106514
    x
                

    There's a lot riding on your springs-literally. Springs are your car's connection to the ground, and their performance is directly related to all other suspension components. Inconsistent, weak springs can cause a multitude of handling problems , and, in some cases, dangerous situations. When it comes to choosing coil springs, there are many alternatives, but if you want the best you can get, the choice is clear: CHOOSE AFCOILS. 

    All AFCOILS carry a lifetime warranty to remain within 2% of the original nominal free height. Choose your rate. 

    Fits 1973-1983 Chevelle/Malibu; 1973-1988 Monte Carlo, Cutlass, Regal, and Grand Prix.

    • Coil spring is machine-ground on both ends to tolerances within 1 degree and then pressed to solid height and "pre-set" to eliminate any potential for additional set
    • Optimized material thickness and coil spacing to achieve the best possible design for each rate and height of spring in the product line
    • Super-high tensile strength chrome silicon wire for long life and and a consistent rate
    • Springs are cold wound on the latest automated coiling equipment and heat treated twice during manufacturing to withstand the most abusive conditions
    • To enhance durability, AFCOILS are shot-peened and coated with a durable finish
  • GM Disc/Drum Proportioning Valve for 1/2-20, 9/16-18 Outlets
    GM Disc/Drum Proportioning Valve for 1/2-20, 9/16-18 Outlets
    SKU-91031351
    x
                

    These proportioning valves are similar to what GM used on many cars in the 70's. They are non-adjustable and may require an adjustable valve in the rear brakes (if needed). Block incorporates metering (for front brakes) and proportioning (for rear brakes) into one unit. For use with front disc, rear drum brake systems.

    Includes hard lines to connect to a master cylinder with 1/2"-20 and 9/16"-18 outlets.

    GM Proportioning Valve Plumbing Instructions (PDF)

  • Wilwood 140-7675 FDL 12.19 Inch Front Brake Hub Kit, 1967-72 GM
    Wilwood 140-7675 FDL 12.19 Inch Front Brake Hub Kit, 1967-72 GM
    SKU-8351407675
    x
                

    Need a big brake package that can scrub off serious speed and look great doing it?Wilwood's Forged Dynalite Pro-Series Front Hub Kits offer complete disc brake upgrade solutions for traditionaldisc brakespindle applications onclassic Chevymuscle cars. All kits can be used with manual or power boost master cylinders.

    12.19" Big Brake Series features:

    • Forged 4-pistonDynalite Calipers - black finish
    • 12.19" diameter Ultralite HP 32 Vane rotors - plain finish
    • Wilwood BP-10SmartPads - low noise, low dust
    • Lightweight anodized aluminum Pro Street hubs
    • Minimum wheel diameter of 16"

    All kits include calipers, hubs, rotors, brackets and hardware needed. Brake hoses sold separately.

    835-1407675 Instructions (PDF)

     

  • GM Disc/Disc Proportioning Valve for 3/8-24 Outlets
    GM Disc/Disc Proportioning Valve for 3/8-24 Outlets
    SKU-91031366
    x
                

    These proportioning valves are similar to what GM used on many cars in the 70's. They are non-adjustable and may require an adjustable valve in the rear brakes (if needed). Block incorporates metering (for front brakes) and proportioning (for rear brakes) into one unit. For use with four-wheel disc brake systems.

    Includes hard lines to connect to a master cylinder with 3/8"-24 outlets.

    910-31366 Instructions (PDF)

  • AFCO 3840CF Pro Touring Double Adj Front Shock, Chevy/GM/Dodge Truck
    AFCO 3840CF Pro Touring Double Adj Front Shock, Chevy/GM/Dodge Truck
    SKU-1063840CF
    x
                

    AFCO Pro Touring Shocks provide bolt-on high performance handing for every generation. These twin-tube shocks are built around a lightweight billet aluminum body housing a low friction rod guide for consistent, fade-free performance. Adjustments are made with a simple click of the knob.

    • 4" Stroke - 10.90" Comp - 14.90" Ext
    • 12.25"-13.25" Shock eye-to-eye Length @ Ride Height
    • 100% Bolt On (Stock Mount)
    • Gives you Total Control over your cars handling capabilities
    • Compression adjustment controls bump and "front end feel" during cornering
    • Rebound adjustment controls body roll and properly dampens spring for overall handling synergy 
    • Factory Dyno Tested for performance
    • Made in the USA

    Note: You may need to "slot" the tie bar mount.  

    For application information see Application tab. 

     

  • 1965-89 Small Block Chevy Fullsize Car Long Tube Headers, Chrome
    1965-89 Small Block Chevy Fullsize Car Long Tube Headers, Chrome
    SKU-9300110C
    x
                Please view the product's page for more information
            
  • Wilwood 140-10996 FDL 11 Inch Pro Series Front Brake Kit, 1967-72 GM
    Wilwood 140-10996 FDL 11 Inch Pro Series Front Brake Kit, 1967-72 GM
    SKU-83514010996
    x
                

    Need a big brake package that can scrub off serious speed and look great doing it?Wilwood's Forged Dynalite Pro-Series Front Hub Kits offer complete disc brake upgrade solutions for traditionaldisc brakespindle applications onclassic Chevymuscle cars. All kits can be used with manual or power boost master cylinders.

    11.00" Pro Series Brakes feature:

    • Forged 4-pistonDynalite Calipers - black finish
    • 11.00" diameter Ultralite HP 30 Vane rotors - plain finish
    • Wilwood BP-10SmartPads - low noise, low dust
    • Lightweight anodized aluminum Pro Street hubs
    • Provides plenty of clearance inside popular 15” wheels.

    All kits include calipers, hubs, rotors, brackets and hardware needed. Brake hoses sold separately.

    835-14010996 Instructions (PDF)

     

  • GM Aluminum Woodgrain Steering Wheel Horn Button, 9 Bolt
    GM Aluminum Woodgrain Steering Wheel Horn Button, 9 Bolt
    SKU-9115500
    x
                These billet aluminum horn buttons are designed for use with 1967-1994 GM car and pickup factory steering columns.  They simply press into the steering wheel adapter.
    • Plated billet aluminum steering wheel horn button fits our 9 billet bolt steering wheel setups
    • Presses into steering wheel adapter
    • Wood grain hydrographic design, smooth finish
    • Mounting pattern: 9 hole. Diameter: 4-5/8"
  • QA1 1210-109 K6145 Style Lower Ball Joint Kit w/ Extended Length Stud
    QA1 1210-109 K6145 Style Lower Ball Joint Kit w/ Extended Length Stud
    SKU-721101091
    x
                Please view the product's page for more information
            
  • 1979-1981 GM Midsize 10 1/2 Inch Disc Brake Rotors
    1979-1981 GM Midsize 10 1/2 Inch Disc Brake Rotors
    SKU-91031081
    x
                We stock those hard-to-find replacement brake rotors for your '79-'81 GM "midsize" cars (Malibu, Monte Carlo, El Camino, Cutlass, Century, Regal, etc.).
            
  • 1978-88 GM Polyurethane Lower Control Arm Bushings
    1978-88 GM Polyurethane Lower Control Arm Bushings
    SKU-91634445
    x
                

    Installing polyurethane front control arm bushings is one of the simplest ways to improve your car's handling and cornering capabilities. These are direct replacements for your GM vehicle's stock rubber bushings, but are more durable and decrease suspension flex for optimum performance.

    These black bushings are sold in sets of four to fit two lower control arms.

    Note: When using lower bushings 916-34445, your frame must be drilled for 1/2 inch bolts.

    Fits:

    • 1978-1988 Malibu & Monte Carlo
  • Tanks Inc. TM34F-T EFI Fuel Tank Kit, 1970 Monte Carlo
    New
    Tanks Inc. TM34F-T EFI Fuel Tank Kit, 1970 Monte Carlo
    SKU-91076221
    x
                

    These all-inlcusive EFI Ready steel fuel tanks from Tanks Inc. take the headache out of converting your classic to modern LS power.  Each kit comes complete with a high-flow (255 liters p/hr) in-tank Walbro pump that supports up to 630 hp.  Also included are straps, sending unit, fill neck, and hose (if applicable).

    • 20 Gallon Capacity
    • Steel Construction
    • Powder Coated Finish
    • Sold Individually
    • Only offered with a GPA-4 pump

    Fits:

    •  1970 Chevrolet Monte Carlo
  • Ididit 1955-1968 Horn Adapter Kit
    Ididit 1955-1968 Horn Adapter Kit
    SKU-44626121
    x
                
    • Horn adapter kit for 1955-68 stock/original equipment steering wheel to a '69-up GM/IDIDIT column

    Instructions (PDF)

  • GM Aluminum Carbon Fiber Steering Wheel Adapter, 9 Bolt
    GM Aluminum Carbon Fiber Steering Wheel Adapter, 9 Bolt
    SKU-9115503
    x
                

    These billet aluminum horn buttons are designed for use with 1967-1994 GM car and pickup factory steering columns.  They simply press into the steering wheel adapter.

    • Smooth carbon fiber hydrographic billet aluminum steering wheel adapter
    • Fits 1967-1994 Chevy/GM cars and trucks
    • Mounting pattern: 9 hole
    • Diameter: 3-1/4"
  • Hawk HB119N.594 Performance 1978-Up GM Metric HP Plus Brake Pads
    Hawk HB119N.594 Performance 1978-Up GM Metric HP Plus Brake Pads
    SKU-919D154P
    x
                Please view the product's page for more information
            
  • 1968-1988 GM A/G Body Center Drag Links
    1968-1988 GM A/G Body Center Drag Links
    SKU-91032211
    x
                We stock these hard to find replacement center drag links that are a must when    rebuilding your classic vehicle.  They will give your 1968-1988 GM A/G Body vehicle  overall   better handling and a positive feel while cruising the strip or on the race track.  
    • Meets or exceeds factory OEM specifications
    • Overall better handling and a positive feel

    We stock these hard-to-find stock-style center drag links for:

    • 1968-72 A-Body
    • 1973-77 A-Body
    • 1978-88 A and G-Body
  • 1970 Chevelle / GTO / LeMans / Tempest Fuel Tank, 20 Gallon
    1970 Chevelle / GTO / LeMans / Tempest Fuel Tank, 20 Gallon
    SKU-91072648
    x
                These OEM replacement gas tanks are designed to fit  in stock 1970-72 Chevelle. They feature quality satin coated steel  construction with a natural finish.
    • 1970-72 CHEVELLE / MALIBU / MONTE CARLO  EXCEPT STATION WAGON & EL CAMINO
    • Without EEC
    • 2 VENTS
    • High quality OEM replacement tanks
    • Satin coated steel
    • Complete your installation with a new fuel sender and straps
  • GM Disc/Drum Proportioning Valve for 3/8-24 Outlets
    GM Disc/Drum Proportioning Valve for 3/8-24 Outlets
    SKU-91031364
    x
                

    These proportioning valves are similar to what GM used on many cars in the 70's. They are non-adjustable and may require an adjustable valve in the rear brakes (if needed). Block incorporates metering (for front brakes) and proportioning (for rear brakes) into one unit. For use with front disc, rear drum brake systems.

    Includes hard lines to connect to a master cylinder with 3/8"-24 outlets.

    910-31364 Instructions (PDF)

  • GM Aluminum Woodgrain Steering Wheel Adapter, 9 Bolt
    GM Aluminum Woodgrain Steering Wheel Adapter, 9 Bolt
    SKU-9115502
    x
                These billet aluminum steering wheel adapters are designed for use with 1967-1994 GM car and pickup factory steering columns and common 9 bolt steering wheel setups.
    • Wood grain hydrographic billet aluminum steering wheel adapter
    • Fits our billet 9 bolt steering wheel setups
    • Mounting pattern: 9 hole
    • Diameter: 3-1/4"
  • Tanks Inc. TM34P-T EFI Fuel Tank Kit, 1971-72 Monte Carlo
    New
    Tanks Inc. TM34P-T EFI Fuel Tank Kit, 1971-72 Monte Carlo
    SKU-91076227
    x
                

    These all-inlcusive EFI Ready steel fuel tanks from Tanks Inc. take the headache out of converting your classic to modern LS power.  Each kit comes complete with a high-flow (255 liters p/hr) in-tank Walbro pump that supports up to 630 hp.  Also included are straps, sending unit, fill neck, and hose (if applicable).

    • 20 Gallon Capacity
    • Steel Construction
    • Powder Coated Finish
    • Sold Individually
    • Only offered with a GPA-4 pump

    Fits:

    •  1971-1972 Chevrolet Monte Carlo
  • 1968-72 GM Passenger Car Fuel Tank Strap Set
    1968-72 GM Passenger Car Fuel Tank Strap Set
    SKU-9109249
    x
                

    Replace those missing, rusted, or worn out gas tank straps with these new OEM replacement straps.  They are sure to keep that new tank safe, secure, and where it belongs.

    • 1970-72 CHEVELLE / MALIBU / MONTE CARLO STRAP KIT, EXCEPT STATION WAGON & EL CAMINO
    • Original style tank straps with hardware
    • 31-7/8" long
    • Satin coated steel
    • Sold in sets of (2) straps
  • Hawk HB119W.594 Performance 1978-Up HPS Brake Pads, DTC-30
    Hawk HB119W.594 Performance 1978-Up HPS Brake Pads, DTC-30
    SKU-919119W
    x
                

    Get superior stopping power with Hawk Performance! Hawk Performance brake pads have been successful in virtually all forms of motorsports for over 16 years. This success helps Hawk Performance enjoy the benefits of the “Win on Sunday, Sell on Monday,” philosophy. Hawk is one of few brake pad manufacturers that can deliver on the promise, “Race Proven – Street Legal.”

    • Increased stopping power
    • High friction/torque hot or cold
    • Gentle on rotors
    • Extended pad life
    • Low dust
    • Virtually noise-free

    Tech Tip:  Only use full metallic pads on coated rotors.

    Sold as a set of 4, 1 set will be needed to outfit 2 calipers.

    Brake Pad Brand Guide (Link) 

    Learn how to properly Bed-In your brake pads by reading our tech article.  Bedding-In Brake Pad Procedure.

  • QA1 1210-104 K5208 Style Upper Ball Joint Kit w/ Extended Length Stud
    QA1 1210-104 K5208 Style Upper Ball Joint Kit w/ Extended Length Stud
    SKU-721101041
    x
                Please view the product's page for more information
            
  • Small Block Chevy Clipster Headers, Chrome
    Small Block Chevy Clipster Headers, Chrome
    SKU-9300108C
    x
                

    These S/B Chevy Clipster headers are for 1964-87 GM A*, F* and G-Body cars and fit many street rod applications with uni-body front clip suspensions. Clipster headers use longer primaries than Tight Tucks, yet shorter than full length headers. Collectors exit toward the rear of the engine compartment providing excellent ground clearance on "slammed" applications as well as clearing steering and suspension components.

    1-5/8" primaries and 3" collectors. Fits straight or angle plug heads.

    Header Sizing Chart (GIF)

     * See NOTES tab for chassis fitment details.

    Chrome Warning: Due to a revised chroming process brought on by recent EPA regulations and high labor costs, today's chrome is not the quality of days gone by. Be Aware: Exhaust components which are chrome plated are now much more susceptible to blueing, blistering, peeling & corrosion. No warranty or returns on chrome exhaust items once them have been installed.

    Not legal for sale or use in California on pollution controlled vehicles

     

  • Pro Shocks C200/GM450 70-87 GM B/B Coilover Front Shock Conversion Kit
    Pro Shocks C200/GM450 70-87 GM B/B Coilover Front Shock Conversion Kit
    SKU-58231001
    x
                

    Pro Coilover conversion kits feature a steel-body coilover front shock which bolts directly in place of your factory front shock. Requires no welding, cutting or modifications to your original frame. Sold as a PAIR.

    Fits the following applications:

    • Regal '73-'87
    • Camaro '70-'81
    • El Camino/Chevelle '73-'83
    • Monte Carlo '73-'88
    • Nova/Chevy II '75-'79
    • S-10/S-15 2WD '84-'04
    • Full Size Chevy '58-'93
    • Cutlass '73-'87
    • Omega '79-'79
    • Firebird/Gran Prix '70-'81
    • LeMans '73-'87
    • GTO/Ventura '74-'77
  • AFCO 20147-2 GM Shock Mount Tie Bar Kit, 2.375 Inch Bar
    AFCO 20147-2 GM Shock Mount Tie Bar Kit, 2.375 Inch Bar
    SKU-106201472
    x
                These tie bar shock mount kits will convert your bearing end shocks to a bar mount. For all AFCO shocks except K-Series.
            
  • Hawk HB119H.594 Performance 1978-Up GM Metric HPS Brake Pads
    Hawk HB119H.594 Performance 1978-Up GM Metric HPS Brake Pads
    SKU-919D154
    x
                

    Get superior stopping power with Hawk Performance! Hawk Performance brake pads have been successful in virtually all forms of motorsports for over 16 years. This success helps Hawk Performance enjoy the benefits of the “Win on Sunday, Sell on Monday,” philosophy. Hawk is one of few brake pad manufacturers that can deliver on the promise, “Race Proven – Street Legal.”

    Increasing the performance of your vehicles braking system is easy when you choose Hawk Performance’s HPS braking compound. This unique Ferro-Carbon formula was developed for street performance using the safety and quality of Motorsports severe-duty friction technology.

    • Higher coefficient of friction over stock brake pads
    • Provides 20-40% more stopping power and higher resistance to brake fade than most standard replacement pads
    • Less fade means a highly durable brake pad with less brake dust

    Tech Tip:  Only use full metallic pads on coated rotors.

    Sold as a set of 4, 1 set will be needed to outfit 2 calipers.

    Brake Pad Brand Guide (Link) 

    Learn how to properly B

  • AFCO Direct Fit 1978-88 GM Radiators
    From: $543.99
    AFCO Direct Fit 1978-88 GM Radiators
    SKU-10680258
    x
                Please view the product's page for more information
            
  • AFCO 1967-79 GM LS Swap Radiator
    From: $575.99
    AFCO 1967-79 GM LS Swap Radiator
    SKU-10684253
    x
                

    These LS conversion radiators are built with the correct inlet and outlet required for the engine swap. They are 100% TIG welded, 100% pressure tested and use no epoxy or sealers. These double pass radiators were designed for the rigors of racing, but we added the mounts to allow their superior design on the street. After all, there are more important things to be doing than installing your radiator - like enjoying your car on the road!  Be sure to check the Application tab for vehicle fitment!

    • Uses the same tools to install your new radiator as you did to remove the old one
    • Factory fan shroud provisions on many models
    • Drain plugs included
    • Billet filler neck offers strength and higher quality appearance over stamped
    • TIG welded by skilled craftsmen in the USA
    • Inlets and outlets are positioned correctly for ease of flow

    1967-1979 GM LS Swap Radiator Installation Instructions (PDF)

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance

  • AFCO 200-1002 Low Friction 1978-88 GM A/G-Body Front Suspension
    AFCO 200-1002 Low Friction 1978-88 GM A/G-Body Front Suspension
    SKU-1062001002
    x
                

    This Low Friction kit from AFCO frees up your front suspension and allows it to work the way it was designed. The kit includes low friction ball joints, lightweight lower arm bushings with nylon inserts, and solid steel upper arm bushings. Due to the superior materials used, this kit promotes front end alignment during usage (unlike O.E. soft rubber bushings). Perfect or ProTouring, SCCA, and Drag Racing cars.

    • Assembled kits for easy ordering
    • No modifications necessary-simply choose your application and go
    • Reduced suspension "stiction"
    • Increases ability to transfer weight
    • Precision machining promotes front end alignment during usage (unlike O.E. rubber bushings)
    • Kits contain lightweight lower bushings (nylon inserts for reduced weight and less friction) 

    Each kit contains: (4) ball joints, (4) upper control arm bushings, and (4) lower control arm bushings.

  • 1955-57 Chevy Dropped Spindle Kit for GM Midsize Calipers
    1955-57 Chevy Dropped Spindle Kit for GM Midsize Calipers
    SKU-91034923
    x
                

    Dropped spindles will not only enhance the rake of your Tri-Five Chevy, they will also improve handling due to the lower roll center. These spindles are designed like the original only they have 2” of drop built in. Plus, dropped spindles maintain factory steering & suspension geometry so original steering arms can be used.

    The optional disc brake kit features 10 ½” GM vented cast iron rotors and 1969-77 GM single piston calipers. Brake kit sold separately.

    • 2" drop
    • Completes both sides
    • Maintains factory steering & suspension geometry
    • Includes midsize caliper bracket & bolts

    Note: These spindles cannot be used with stock drums or brake conversions for stock spindles.

    910-34923 Instructions (PDF)

  • GM Rear Sway Bar Kit, 1 Inch
    $171.99
    New
    GM Rear Sway Bar Kit, 1 Inch
    SKU-113690
    x
                Please view the product's page for more information
            
  • Pro Shocks C200/GM300 Coilover Front Shock Conversion Kit, 1970-87 GM
    Pro Shocks C200/GM300 Coilover Front Shock Conversion Kit, 1970-87 GM
    SKU-58231000
    x
                

    Pro Coilover conversion kits feature a steel-body coilover front shock which bolts directly in place of your factory front shock. Requires no welding, cutting or modifications to your original frame. Sold as a PAIR.

    Fits the following applications:

    • Regal '73-'87
    • Camaro '70-'81
    • El Camino/Chevelle '73-'83
    • Monte Carlo '73-'88
    • Nova/Chevy II '75-'79
    • S-10/S-15 2WD '84-'04
    • Full Size Chevy '58-'93
    • Cutlass '73-'87
    • Omega '79-'79
    • Firebird/Gran Prix '70-'81
    • LeMans '73-'87
    • GTO/Ventura '74-'77
  • 1967-1987 Small Block Chevy Shorty Headers, Manual Trans, AHC Coated
    1967-1987 Small Block Chevy Shorty Headers, Manual Trans, AHC Coated
    SKU-9300109H
    x
                

    These S/B Chevy headers are a shorty design that give maximum ground clearance and work with floor-shift manual transmissions only. Features 1-5/8" primary tubes and 3" collectors. Built with surface machined thick steel flanges for a great seal and mandrel bent mild steel tubing.

    Available with metallic ceramic coating. Unlike paint or chrome, metallic ceramic coating is easy to keep clean, resists rust and corrosion and will not discolor. Metallic ceramic coating also reduces underhood temperatures.

    Headers come with installation hardware, collector reducers, gaskets and instructions.  

    • 1968-87 Camaro, Chevelle, Malibu and El Camino
    • Must use non-shell style motor mounts
    • Manual Transmissions Only

    Header Dimensions Chart (JPEG)

  • GM Aluminum Carbon Fiber Steering Wheel Horn Button, 9 Bolt
    GM Aluminum Carbon Fiber Steering Wheel Horn Button, 9 Bolt
    SKU-9115501
    x
                These billet aluminum horn buttons are designed for use with 1967-1994  GM car and pickup factory steering columns.  They simply press into the  steering wheel adapter.
    • Billet aluminum steering wheel horn button fits our billet 9 bolt steering wheel setups
    • Presses into steering wheel adapter
    • Carbon fiber hydrographic design
    • Mounting pattern: 9 hole
    • Diameter: 4-5/8"
  • Hawk HB119M.594 Performance Black 1978-Up GM Metric Brake Pads
    Hawk HB119M.594 Performance Black 1978-Up GM Metric Brake Pads
    SKU-919D154M
    x
                

    Get superior stopping power with Hawk Performance! Hawk Performance brake pads have been successful in virtually all forms of motorsports for over 16 years. This success helps Hawk Performance enjoy the benefits of the “Win on Sunday, Sell on Monday,” philosophy. Hawk is one of few brake pad manufacturers that can deliver on the promise, “Race Proven – Street Legal.”

    Hawk Black Pads:

    Medium torque and temperature compound designed to be a good, all-purpose low- cost racing brake pad. Can be used as a Dirt Circle Track and Stock Car application.

    Tech Tip:  Only use full metallic pads on coated rotors.

    Sold as a set of 4, 1 set will be needed to outfit 2 calipers.

    Brake Pad Brand Guide (Link) 

    Learn how to properly Bed-In your brake pads by reading our tech article.  Bedding-In Brake Pad Procedure.

     

  • Cooling Components CCI-1780 Cooling Machine Electric Fan, Style 80
    Cooling Components CCI-1780 Cooling Machine Electric Fan, Style 80
    SKU-91015682
    x
                At one time or another we all have had a car overheat. These fan/shroud combos are just the ticket to avoid having it happen again. These 2500 CFM pull-type fans measure 2-5/8" deep at the motor, 2-3/8" at the mounting brackets and 1-1/2" at the high impact shroud.
    • 26" wide x 20" high
    • Can be easily reduced in size to 23-1/4" wide x 18-1/2" high
    • 12 volt operation
    • Lower engine operating temperatures
    • Saves horsepower
    • Better fuel mileage
    • Constructed of high-impact ABS material

    Note:  This fan motor requires the use of a 70 amp or larger relay.

    Fan Application Chart (GIF)

    Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance.

  • 1955-57 Chevy Dropped Spindle Kit for GM Metric Calipers
    1955-57 Chevy Dropped Spindle Kit for GM Metric Calipers
    SKU-91034921
    x
                

    Dropped spindles will not only enhance the rake of your Tri-Five Chevy, they will also improve handling due to the lower roll center. These spindles are designed like the original only they have 2” of drop built in. Plus, dropped spindles maintain factory steering & suspension geometry so original steering arms can be used.

    • 2" drop
    • Completes both sides
    • Maintains factory steering & suspension geometry
    • Includes Metric Caliper bracket & bolts

    Brake kit sold separately. Track width is increased over stock O/E front end width by 3/4" overall or 3/8" per side.

    Note: These spindles cannot be used with stock drums or brake conversions for stock spindles.

    910-34921 Instructions (PDF)

Goto Previous PagePrevious Page
1 2