Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products

Banner

From the moment the Ford Mustang galloped into production, the muscle car scene would never be the same. The first generation mustang remains one of the most popular cars of all time. Speedway Motors carries a huge line of 1964-73 Mustang parts to keep your pony running at full speed. From roaring headers to complete wiring harnesses, we've got you covered - all at the best prices around.

"Muscle Car, 1964-73 Mustang" Page 1 of 2

New (0)

Garage Sale (0)

  • O-Ring to Inverted Flare Power Steering Adapter
    O-Ring to Inverted Flare Power Steering Adapter
    x
                

    If you have a power steering pump using late model style O-ring sealed hoses that you need to adapt to traditional inverted flare hoses, this inverted flare adapter is a simple fix. Simply insert the adapter into the flow control fitting and then install your inverted flare hose.

    Use to convert from 16mm o-ring to 5/8" inverted flare style.

  • Gates 353300 1967-1970 Mustang Power Steering Cylinder Hose
    Gates 353300 1967-1970 Mustang Power Steering Cylinder Hose
    x
                

    These power steering pressure hoses from Gates are authentic reproductions of the originals. They work on 1967-70 Mustang applications and include fittings already assembled.

    • Male inverted flare ends
    • End diameter: .3125"
    • Length: 10.375"
    • Pressure hose with control valve end for:
      • 390/428 V-8 - 1968 Mustang
      • 300/351/390/428/429 V-8 - 1969-70 Mustang

    Note: Two of these hoses are required for Mustang applications.

    1964-70 Mustang Power Steering Hose Application Guide (GIF)

  • Gates 362690 1964-1966 Mustang Power Steering Return Hose
    Gates 362690 1964-1966 Mustang Power Steering Return Hose
    x
                

    These power steering return hoses from Gates are cut to fit and work on 1964-66 Mustang applications.

    • Male inverted flare end
    • End (1) Diameter: 3/8"
    • Length: 51"

    *Double check "Application" tab to make sure this item will work with your correct engine.

    1964-70 Mustang Power Steering Hose Application Guide (GIF)

  • Single Groove Power Steering Pump Pulley, Machined Aluminum
    Single Groove Power Steering Pump Pulley, Machined Aluminum
    x
                

    These power steering pump pulleys for a long water pump are available in plain(Pln), polished(Pol), or chrome(Chr).  Pulley listed is 5-3/4" in diameter.

    • Works only with the long pump and matching long pump pulleys
    • Works with our Saginaw pump (91032908)
    • Bolt-on pulley
    • 5-3/4" in diameter
    • Measures .852" from the front of the pulley to the center of the V-belt groove just as it would be mounted on the pump
    • Choose from plain, polished, or chome finish.
  • Unisteer 8001090-01 68-70 Mustang Manual Rack & Pinion Conversion Kit
    Unisteer 8001090-01 68-70 Mustang Manual Rack & Pinion Conversion Kit
    x
                

    This rack & pinion conversion kit will finally give your classic 1968-70 Mustang the ease of steering and road feel modern cars have. Each kit is engineered to bolt in without sacrificing steering geometry or safety. The custom steering gear is engineered to match the stock suspension, and has NO BUMP STEER. Installation is extremely simple, since the unit is a true bolt-on.

    Each kit includes everything needed to do a complete installation on a Mustang with the original column.

  • Gates 350110 1967-1970 Mustang Power Steering Return Hose Fitting
    Gates 350110 1967-1970 Mustang Power Steering Return Hose Fitting
    x
                

    These power steering return hose fittings from Gates are furnished separately and work on 1967-70 Mustang applications.  They feature inverted flare threads and a zinc-dichromate plated finish to resist corrosion.

    • Male inverted flare end
    • End (1) Diameter: 3/8"
    • Works with standard 3/8" hose
    • Zinc-dichromate plated finish to resist corrosion

    *Double check "Application" tab to make sure this item will work with your correct engine.

    1964-70 Mustang Power Steering Hose Application Guide (GIF)

  • Gates 353120 1964-1966 Mustang Power Steering Cylinder Hose
    Gates 353120 1964-1966 Mustang Power Steering Cylinder Hose
    x
                

    These power steering cylinder hoses from Gates are authentic reproductions of the originals. They work on 1964-66 Mustang applications and include fittings already assembled.

    • Male inverted flare ends
    • End diameter: .3125"
    • Length: 9-3/4"

    Note: Two of these hoses are required for Mustang applications.

    1964-70 Mustang Power Steering Hose Application Guide (GIF)

  • Ididit 1120642020 1964-66 Mustang Tilt Steering Column, Chrome
    Ididit 1120642020 1964-66 Mustang Tilt Steering Column, Chrome
    x
                

    Wouldn't it be nice to have a tilt column in your Mustang and still be able to use your original steering wheel? These columns bolt to the original dash mount and include a new lower column mount. The wiring is also easy to hook-up. Requires you to modify the original input shaft on the steering box and you will need coupler 446-3449 that is sold separately.

    • Chrome plated steel finish 
    • Accepts stock steering wheels 
    • Self-Canceling Turn Signals
    • 8-Position Tilt
    • 4-Way Flashers
    • Knobs and Handles
    • Ford Turn Signal Switch
    • Ford Top Shaft
    • Floor Mount included
    • 3/4"-36 Lower Shaft

    446-6466C Instructions (PDF)

  • Elgin Industries DS791 1971-73 Mustang Inner Tie Rod End
    Elgin Industries DS791 1971-73 Mustang Inner Tie Rod End
    x
                High quality 1971-73 Mustang inner tie rod end.
            
  • Ididit 1300644020 1968 Mustang Tilt Steering Column, Chrome
    Ididit 1300644020 1968 Mustang Tilt Steering Column, Chrome
    x
                

    Wouldn't it be nice to have a tilt column in your Mustang and still be able to use your original steering wheel? These columns bolt to the original dash mount and include a new lower column mount. The wiring is also easy to hook-up. Column is a straight bolt-in when used with the new rag joint (also sold separately). 

    • Accepts stock steering wheels 
    • Self-Canceling Turn Signals
    • 8-Position Tilt
    • 4-Way Flashers
    • Knobs and Handles
    • Ford Turn Signal Switch
    • Ford Top Shaft
    • Floor Mount included
    • 3/4" 36 Lower Shaft
    • Collapsible
    • Chrome plated steel finish

    446-6869C Instructions (PDF)

  • Unisteer 8001110-01 64-66 Mustang Manual Rack & Pinion Conversion Kit
    Unisteer 8001110-01 64-66 Mustang Manual Rack & Pinion Conversion Kit
    x
                

    This rack & pinion conversion kit will finally give your classic 64'-66 Mustang the ease of steering and road feel modern cars have. Each kit is engineered to bolt in without sacrificing steering geometry or safety.The custom steering gear is engineered to match the stock suspension, and has NO BUMP STEER. Installation is extremely simple, since the unit is a true bolt-on.

    Each kit includes everything needed to do a complete installation on a Mustang with the original column.

    910-32301 Instructions (PDF)

     

  • Elgin Industries 3K8158 1967-70 Mustang Power Steering Idler Arm
    Elgin Industries 3K8158 1967-70 Mustang Power Steering Idler Arm
    x
                

    We stock these hard to find components.  These replacement stock idler arms for 1967-70 Ford Mustang power steering cars are just like the originals.  They will improve overall vehicle handling and increase the life of other steering and suspension components. These idler arms are manufactured to meet or exceed OEM.

    • Replacement stock OEM
    • 1967-70 Ford Mustang
    • Manual power cars
    • Improve overall vehicle handling
    • Increase life of other components

     

  • Gates 353100 1964 Mustang Power Steering Pressure Hose
    Gates 353100 1964 Mustang Power Steering Pressure Hose
    x
                

    These power steering pressure hoses from Gates are authentic reproductions of the originals. They work on 1964 Mustang applications and include fittings already assembled.

    • Male inverted flare ends
    • End (1) diameter: 1/4"
    • End (2) diameter: 3/8"
    • Length: 42.5"

    Note: These pressure hoses work with Ford style pumps.

    *Double check "Application" tab to make sure this item will work with your correct engine.

    1964-70 Mustang Power Steering Hose Application Guide (GIF)

  • Gates 353000 1967-1970 Mustang Power Steering Return Hose
    Gates 353000 1967-1970 Mustang Power Steering Return Hose
    x
                

    These power steering return hoses from Gates are cut to fit and work on 1967-70 Mustang applications.

    • Male inverted flare end
    • End (1) Diameter: .375"
    • Length: 51.75"

    *Double check "Application" tab to make sure this item will work with your correct engine.

    1964-70 Mustang Power Steering Hose Application Guide (GIF)

  • Ididit 1300646010 1969 Mustang Tilt Steering Column, Plain
    Ididit 1300646010 1969 Mustang Tilt Steering Column, Plain
    x
                The hot rod experts at Ididit put a lot of time and  research into these  retrofit steering columns, ensuring a perfect fit  for your specific  vehicle. These Ididit retrofit floor shift steering  columns are  designed to fit in the factory location and, in many cases,  will put  the steering wheel back in its original location. They include   self-canceling turn signals, 4-way flashers and knobs and handles. The   columns are designed for use with aftermarket steering wheels. 
    • plain steel tilt column
    • 8 position tilt
    • Ford turn signal switch
    • 4 way flasher
    • Ford style knobs & levers
    • 3/4" 36 lower shaft
    • works on stock steering box
  • Ididit 1300645010 1968 Mustang Tilt Steering Column for Rack & Pinion
    Ididit 1300645010 1968 Mustang Tilt Steering Column for Rack & Pinion
    x
                The hot rod experts at Ididit put a lot of time and  research into these retrofit steering columns, ensuring a perfect fit  for your specific vehicle. These Ididit retrofit floor shift steering  columns are designed to fit in the factory location and, in many cases,  will put the steering wheel back in its original location. They include  self-canceling turn signals, 4-way flashers and knobs and handles. The  columns are designed for use with aftermarket steering wheels. 
    • For '68 Mustang using aftermarket rack & pinion ONLY
    • Bolt-In
    • Raw paintable steel finish
    • 8 position tilt
    • Ford top shaft
    • Ford self canceling turn signals
    • 4 way flasher
    • Ford style knob & Levers
    • 3/4" - 36 spline lower shaft
    • Uses original under dash mount and floor mount along with the factory wiring and plug
    • Made in the USA
  • Ididit 1120642010 1964-66 Mustang Tilt Steering Column, Plain
    Ididit 1120642010 1964-66 Mustang Tilt Steering Column, Plain
    x
                

    Wouldn't it be nice to have a tilt column in your Mustang and still be able to use your original steering wheel? These columns bolt to the original dash mount and include a new lower column mount. The wiring is also easy to hook-up. Requires you to modify the original input shaft on the steering box and you will need coupler 446-3449 that is sold separately.

    • Plain unpainted steel finish 
    • Accepts stock steering wheels 
    • Self-Canceling Turn Signals
    • 8-Position Tilt
    • 4-Way Flashers
    • Knobs and Handles
    • Ford Turn Signal Switch
    • Ford Top Shaft
    • Floor Mount included
    • 3/4"-36 Lower Shaft

    446-6466 Instructions (PDF)

    Note: Steering wheel not included.

  • Ididit 1300647010 1969 Mustang Tilt Steering Column for Rack & Pinion
    Ididit 1300647010 1969 Mustang Tilt Steering Column for Rack & Pinion
    x
                The hot rod experts at Ididit put a lot of time and  research into these   retrofit steering columns, ensuring a perfect fit  for your specific   vehicle. These Ididit retrofit floor shift steering  columns are   designed to fit in the factory location and, in many cases,  will put   the steering wheel back in its original location. They include    self-canceling turn signals, 4-way flashers and knobs and handles. The    columns are designed for use with aftermarket steering wheels. 
    • Plain steel
    • 8 POSITION TILT
    • FORD TURN SIGNAL SWITCH
    • 4 way flasher
    • Ford style knobs & levers
    • 3/4" 36 lower shaft
    • Works with rack steering
  • Ididit 3000053434 Rag Joint for 1968-69 Mustang Column
    Ididit 3000053434 Rag Joint for 1968-69 Mustang Column
    x
                

    Column is a straight bolt-in when used with this 3/4" 36-spline x 3/4" 36-spline rag joint.

  • Unisteer 8001120-01 1967 Mustang Manual Rack & Pinion Conversion Kit
    Unisteer 8001120-01 1967 Mustang Manual Rack & Pinion Conversion Kit
    x
                

    This rack & pinion conversion kit will finally give your classic 1967 Mustang the ease of steering and road feel modern cars have. Each kit is engineered to bolt in without sacrificing steering geometry or safety. The custom steering gear is engineered to match the stock suspension, and has NO BUMP STEER. Installation is extremely simple, since the unit is a true bolt-on.

    Each kit includes everything needed to do a complete installation on a Mustang with the original column.

     

  • Elgin Industries ES364RL 1967-69 Mustang Inner Tie Rod End
    Elgin Industries ES364RL 1967-69 Mustang Inner Tie Rod End
    x
                

    We stock these hard to find replacement tie rods that are a must when rebuilding your classic vehicle.  They will give your Ford Mustang overall better handling and a positive feel while cruising the strip.  These inner tie rod ends feature right hand threads.  Our outer tie rod ends are left hand thread and the adjuster sleeve makes the adjustment for toe in by rotating clockwise or counter clockwise.

    • 1967-69 Mustang (except Boss)
    • Meets or exceeds factory OEM specifications
    • Overall better handling and a positive feel
    • Length from Center of Stud to End of Threads: 10.60"
    • Threads: 11/16"-18 RH
    • Top of Taper: .560"
    • Bottom of Taper: .506"

     

  • Elgin Industries ES317L 1964-66 Mustang 6 Cyl. Outer Tie Rod End
    Elgin Industries ES317L 1964-66 Mustang 6 Cyl. Outer Tie Rod End
    x
                

    High quality 1964-66 Mustang steering outer tie rod for 6 cyl. cars only.

  • Elgin Industries ES387L 1969 Boss, 1970 Mustang Inner Tie Rod
    Elgin Industries ES387L 1969 Boss, 1970 Mustang Inner Tie Rod
    x
                

    We stock these hard to find replacement tie rods that are a must when rebuilding your classic vehicle.  They will give your Ford Mustang overall better handling and a positive feel while cruising the strip.  These inner tie rod ends feature right hand threads.  Our outer tie rod ends are left hand thread and the adjuster sleeve makes the adjustment for toe in by rotating clockwise or counter clockwise.

    • 1969 Boss and all 1970 Mustang
    • Meets or exceeds factory OEM specifications
    • Overall better handling and a positive feel
    • Length from Center of Stud to End of Threads: 10.60"
    • Threads: 11/16"-18 LH
    • Top of Taper: .600"
    • Bottom of Taper: .535"

     

  • Gates 350120 1964-1966 Mustang Power Steering Return Hose Fitting
    Gates 350120 1964-1966 Mustang Power Steering Return Hose Fitting
    x
                

    These power steering return hose fittings from Gates are furnished separately and work on 1964-66 Mustang applications.  They feature inverted flare threads and a zinc-dichromate plated finish to resist corrosion.

    • Male inverted flare end
    • End (1) Diameter: 3/8"
    • Works with standard 3/8" hose
    • Zinc-dichromate plated finish to resist corrosion

    *Double check "Application" tab to make sure this item will work with your correct engine.

    1964-70 Mustang Power Steering Hose Application Guide (GIF)

  • Flaming River FR1497Q 1964-66 Mustang Manual Steering Box
    Flaming River FR1497Q 1964-66 Mustang Manual Steering Box
    x
                

    Let's face it, that steering box is now 40+ years old and not as tight as it used to be. These direct replacement boxes with all new castings, sector gear shaft, needle bearings, and internals will make your car handle like new again.

    Has a 16:1 ratio.

  • Ididit 1300644010 1968 Mustang Tilt Steering Column, Plain Steel
    Ididit 1300644010 1968 Mustang Tilt Steering Column, Plain Steel
    x
                

    Wouldn't it be nice to have a tilt column in your Mustang and still be able to use your original steering wheel? These columns bolt to the original dash mount and include a new lower column mount. The wiring is also easy to hook-up. Column is a straight bolt-in when used with the new rag joint (also sold separately). 

    • Accepts stock steering wheels 
    • Self-Canceling Turn Signals
    • 8-Position Tilt
    • 4-Way Flashers
    • Knobs and Handles
    • Ford Turn Signal Switch
    • Ford Top Shaft
    • Floor Mount included
    • 3/4" 36 Lower Shaft
    • Collapsible
    • Plain unpainted steel finish

    446-6869 Instructions (PDF)

    Note: Steering wheel not included.

  • Elgin Industries ES387R 1970-73 Mustang Outer Tie Rod End
    Elgin Industries ES387R 1970-73 Mustang Outer Tie Rod End
    x
                High quality 1970-73 Mustang outer tie rod end.
            
  • Elgin Industries ES317R 1964-66 Mustang 6 Cyl. Inner Tie Rod End
    Elgin Industries ES317R 1964-66 Mustang 6 Cyl. Inner Tie Rod End
    x
                

    High quality 1964-66 Mustang steering inner tie rod for 6 cyl. cars only.

  • Elgin ES336L 1964-66 Mustang 8 Cyl. Outer Tie Rod End, Driver Side
    Elgin ES336L 1964-66 Mustang 8 Cyl. Outer Tie Rod End, Driver Side
    x
                

    We stock these hard to find components.  These replacement stock steering outer tie rod for 1964-66 Mustang Ford cars are just like the originals.  They will improve overall vehicle handling and increase the life of other steering and suspension components. These tie rods are manufactured to meet or exceed OEM.

    • Replacement stock OEM
    • 1964-66 Ford Mustang
    • Driver side 8 cylinder power steering cars only
    • Improve overall vehicle handling
    • Increase life of other components

     

  • Elgin Industries 3K8161 1967-70 Mustang Manual Steering Idler Arm
    Elgin Industries 3K8161 1967-70 Mustang Manual Steering Idler Arm
    x
                

    We stock these hard to find components.  These replacement stock idler arms for 1967-70 Ford Mustang manual steering cars are just like the originals.  They will improve overall vehicle handling and increase the life of other steering and suspension components. These idler arms are manufactured to meet or exceed OEM.

    • Replacement stock OEM
    • 1967-70 Ford Mustang
    • Manual steering cars
    • Improve overall vehicle handling
    • Increase life of other components

     

     

  • Gates 361380 1964-1965 Mustang Power Steering Pressure Hose
    Gates 361380 1964-1965 Mustang Power Steering Pressure Hose
    x
                

    These power steering pressure hoses from Gates are authentic reproductions of the originals. They work on 1964-65 Mustang applications and include fittings already assembled.

    • Male inverted flare ends
    • End (1) Diameter: .25"
    • End (2) Diameter: .375"
    • Length: 41.5"

    Note: These pressure hoses work with Eaton style pumps.

    *Double check "Application" tab to make sure this item will work with your correct engine.

    1964-70 Mustang Power Steering Hose Application Guide (GIF)

  • Elgin Industries ES336R 1964-66 Mustang 8 Cyl. Outer Tie Rod End
    Elgin Industries ES336R 1964-66 Mustang 8 Cyl. Outer Tie Rod End
    x
                

    High quality 1964-66 Mustang outer tie rod for 8 cyl. manual steering (both side) or power steering (passenger side only) cars.

  • Flaming River FR1498 1967-70 Mustang Manual Steering Box
    Flaming River FR1498 1967-70 Mustang Manual Steering Box
    x
                

    Let's face it, that steering box is now 40+ years old and not as tight as it used to be. These direct replacement boxes with all new castings, sector gear shaft, needle bearings, and internals will make your car handle like new again. 

    Has a 16:1 ratio. 3/4"-36 spline input.

    910-32344 Instructions (PDF)

  • Elgin 1964-66 Mustang 8 Cylinder Idler Arm
    Elgin 1964-66 Mustang 8 Cylinder Idler Arm
    x
                

    We stock these hard to find components.  These replacement stock idler arms for 1964-66 Mustang Ford cars are just like the originals.  They will improve overall vehicle handling and increase the life of other steering and suspension components. These idler arms are manufactured to meet or exceed OEM.

    • Replacement stock OEM
    • 1964-66 Ford Mustang
    • 8 cylinder passenger cars (except GT350)
    • Improve overall vehicle handling
    • Increase life of other components

     

  • Gates 354470 1967-1970 Mustang Power Steering Pressure Hose
    Gates 354470 1967-1970 Mustang Power Steering Pressure Hose
    x
                

    These power steering pressure hoses from Gates are authentic reproductions of the originals. They work on 1967-70 Mustang applications and include fittings already assembled.

    1967-70 Mustang power steering hose kit has a pressure line for inverted flare fittings.  Large female inverted flare is 5/8 x 18 IFF and the smaller end is ½ x 20 inverted flare male.  There is also an adapter to reduce the smaller end from ½ x 20 to 3/8 x 24 IFM. 

    • End (1) type: Male inverted flare
    • End (2) type: Female SAE
    • End (1) Diameter: .3125"
    • End (2) Diameter: .375"
    • Length: 20.125"

    Note: These pressure hoses work with Eaton style pumps.

    *Double check "Application" tab to make sure this item will work with your correct engine.

    1964-70 Mustang Power Steering Hose Application Guide (GIF)

  • Global West Suspension TBF-5 1964-66 Mustang Lower Control Arms
    Global West Suspension TBF-5 1964-66 Mustang Lower Control Arms
    x
                

    Global West Negative Roll tubular lower control arms improve the geometry of the stock Mustang suspension while adding increased strength.

    • Stock length, non-adjustable design
    • Spherical bearing eliminates suspension bind
    • Uses screw-in style ball joints
    • Accepts stock strut rods or Global West adjustable strut rods
Goto Previous PagePrevious Page
1 2