Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Muscle Car Headers & Exhaust At Speedway Motors

Speedway Motors has the muscle car headers and mufflers you need, at a price you can afford. Check out our huge inventory of chassis headers, LS1 swap headers and tight-fit block hugger headers, all available with durable ceramic AHC coating, polished, or stainless steel. Don't forget about our cast iron exhaust manifolds and dual exhaust kits as well. With an awesome selection of high performance Flowmaster mufflers, exhaust wrap, glasspacks, and exhaust tips, Speedway can help you get the roar you want from your muscle car without the roar from your wife for spending too much money!

"Muscle Car, 1964-73 Mustang" Page 1 of 1

New (0)

On Sale (0)

Garage Sale (0)

  • Small Block Ford Block Hugger Tight-Fit Headers, Plain
    Small Block Ford Block Hugger Tight-Fit Headers, Plain
    x
                

    For years it seemed like installing a 289-302-351W Ford in your street rod was a far bigger challenge than using a small-block Chevy. One significant problem was finding compact shorty headers. Well, problem solved! These tight-fit headers are designed to hug tight against your small block Ford V8 and can make seemingly impossible installations much easier to tackle. 

    For factory style oval port heads. Will work with GT40P heads. Includes 2.5" collector reducers to 2.25" pipe, gaskets and bolts.

    • Must be used with 910-67210 (auto trans) or 910-9504 (3/8" throw manual trans) style mini starter or equivalent compact starter
    • We recommend motor mounts 270-2221 (Left) and 270-2220 (Right)
    • Left mount may need to be ground 1/4” to provide clearance for collector
    • Fits engines with forward sump oil pans

    Tight-Fit Header Instructions (PDF)

    Header Dimension Chart

     

  • Small Block Ford, Block Hugger, Tight-Fit Headers, AHC Coated
    Small Block Ford, Block Hugger, Tight-Fit Headers, AHC Coated
    x
                

    For years it seemed like installing a 289-302-351W Ford in your street rod was a far bigger challenge than using a small-block Chevy. One significant problem was finding compact shorty headers. Well, problem solved! These tight-fit headers are designed to hug tight against your small block Ford V8 and can make seemingly impossible block hugger headers installations much easier to tackle. These block hugger headers are ceramic coated headers.

    For factory style oval port heads. Will work with GT40P heads. Includes 2.5" collector reducers to 2.25" pipe, gaskets and bolts.

    • Must be used with 910-67210 (Fuel Injected Engines) style mini starter or equivalent compact starter
    • We recommend motor mounts 270-2221 (Left) and 270-2220 (Right)
    • Left mount may need to be ground 1/4” to provide clearance for collector
    • Fits engines with forward sump oil pans

    930-0201 Instructions (PDF)

    S/B Ford Header Dimension Chart (GIF) 

  • 1964-70 Mustang Tri-Y Headers, AHC Coated
    1964-70 Mustang Tri-Y Headers, AHC Coated
    x
                

    These headers are a replica of the Shelby TRI-Y header made famous in the 60's. They fit 260-302 V8s in 1964-70 Ford Mustangs* with automatic or manual transmissions (10.5" max clutch diameter). You will need bracket listed if car has power steering. These ceramic coated headers provide superior performance and durability.

    • 1-1/2" - 1-3/4" stepped primaries
    • 2-1/2" collectors
    *See Notes tab for important install info.
  • Small Block Ford, Block Hugger Tight-Fit Headers, Chrome
    Small Block Ford, Block Hugger Tight-Fit Headers, Chrome
    x
                

    For years it seemed like installing a 289-302-351W Ford in your street rod was a far bigger challenge than using a small-block Chevy. One significant problem was finding compact shorty headers. Well, problem solved! These tight-fit headers are designed to hug tight against your small block Ford V8 and can make seemingly impossible block hugger headers installations much easier to tackle. 

    For factory style oval port heads. Will work with GT40P heads. Includes 2.5" collector reducers to 2.25" pipe, gaskets and bolts.

    • Must be used with 910-67210 (Fuel Injected Engines) or 910-67462 (Carbureted Engines) style mini starter or equivalent compact starter
    • We recommend motor mounts 270-2221 (Left) and 270-2220 (Right)
    • Left mount may need to be ground 1/4” to provide clearance for collector
    • Chrome headers are polished before and after plating for show quality appearance
    • Fits engines with forward sump oil pans

    930-0201 Instructions (PDF)

    S/B Ford Header Dimension Chart (GIF) 

    Chrome Warning: Due to a revised chroming process brought on by recent EPA regulations and high labor costs, today's chrome is not the

  • 1964-70 Mustang Tri-Y Headers, Plain
    1964-70 Mustang Tri-Y Headers, Plain
    x
                

    These headers are a replica of the Shelby TRI-Y header made famous in the 60's. They fit 260-302 V8s in 1964-70 Ford Mustangs* with automatic or manual transmissions (10.5" max clutch diameter). You will need bracket listed if car has power steering.

    • 1-1/2" - 1-3/4" stepped primaries
    • 2-1/2" collectors
    *See Notes tab for important install info.
  • 1964-73 Mustang Long Tube Headers, AHC Coated
    1964-73 Mustang Long Tube Headers, AHC Coated
    x
                These high velocity long tube headers fit 260-289-302 V8s in 1964-73 Ford Mustangs with floor shift automatic or manual transmissions. Works with C-6 Automatic, but does NOT work with '71-'73 manual transmission. NOT for use with Dart/Windsor heads or Boss heads. These ceramic coated headers provide superior peformance and durability.
    • 1-5/8" primaries
    • 3" collectors

     

  • 1964-73 Mustang Long Tube Headers, Plain Steel
    1964-73 Mustang Long Tube Headers, Plain Steel
    x
                These high velocity long tube headers fit 260-289-302 V8s in 1964-73 Ford Mustangs with floor shift automatic or manual transmissions. Works with C-6 Automatic, but does NOT work with '71-'73 manual transmission. NOT for use with Dart/Windsor heads or Boss heads.  
    • 1-5/8" primaries
    • 3" collectors