Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop 1964-72 Chevelle At Speedway Motors

There are few cars as synomous with power as the Chevelle. One of GM's best A-Body cars, the Chevelle has been a favorite of muscle car lovers for decades. Speedway has expanded it's muscle car product line and now offers more Chevelle parts than ever before. From control arms to direct fit radiators, we stock it all and at the best prices around.

"Muscle Car, 1964-72 Chevelle" Page 1 of 2

Garage Sale (0)

  • O-Ring to Inverted Flare Power Steering Adapter
    O-Ring to Inverted Flare Power Steering Adapter
    x
                

    If you have a power steering pump using late model style O-ring sealed hoses that you need to adapt to traditional inverted flare hoses, this inverted flare adapter is a simple fix. Simply insert the adapter into the flow control fitting and then install your inverted flare hose.

    Use to convert from 16mm o-ring to 5/8" inverted flare style.

  • Tie Rod Sleeve - 4.75 x 11/16"
    Tie Rod Sleeve - 4.75 x 11/16"
    x
                Tie rod adjustment sleeve for 1970-81 Camaro/Firebird, 1968-72 GM A-Body (Chevelle), 1973-77 GM A-Body (Chevelle), and Dirtworks Chassis. 
            
  • Ididit 1955-1968 Horn Adapter Kit
    Ididit 1955-1968 Horn Adapter Kit
    x
                
    • Horn adapter kit for 1955-68 stock/original equipment steering wheel to a '69-up GM/IDIDIT column

    Instructions (PDF)

  • 1968-1988 GM A/G Body Center Drag Links
    1968-1988 GM A/G Body Center Drag Links
    x
                We stock these hard to find replacement center drag links that are a must when    rebuilding your classic vehicle.  They will give your 1968-1988 GM A/G Body vehicle  overall   better handling and a positive feel while cruising the strip or on the race track.  
    • Meets or exceeds factory OEM specifications
    • Overall better handling and a positive feel

    We stock these hard-to-find stock-style center drag links for:

    • 1968-72 A-Body
    • 1973-77 A-Body
    • 1978-88 A and G-Body
  • Single Groove Power Steering Pump Pulley, Billet Aluminum, Short Pump
    Single Groove Power Steering Pump Pulley, Billet Aluminum, Short Pump
    x
                

    Power steering pump pulley for use with short-style (1955-1968) water pumps. Available in plain billet only.

    • For use with our 91032908 power steering pump 
    • Use with 2-groove lower crank pulley when using P/S bracket 91667920
    • Pulley runs off outer groove of lower crank pulley
    • 5/8" shaft hole w/ key way
    • Chamfered on the back side to allow clearance on pumps
  • Tuff Stuff GM Saginaw Power Steering Pump with Reservoir
    Tuff Stuff GM Saginaw Power Steering Pump with Reservoir
    x
                These Saginaw power steering pumps from Tuff Stuff come with a new reservoir, billet cap, chrome hardware and new dipstick. Desirable early style 1965-79 pump with threaded and keyed shaft for easy pulley installation. Available in powder coated black or chrome finish. Hoses are available from most local parts stores. 

    Pump has a 3/8" hose barb for return line and a female 5/8"-18 inverted flare fitting for the high pressure outlet. Pulley not included.

    • Saginaw power steering pump with a new reservoir, billet cap, chrome hardware and new dipstick
    • Powder coated black or chrome
    • Keyed shaft for easy pulley intallation
    • Pulleys available in plain, polished, and chrome
    • 6" diameter pulleys not included

    Works well with small block Chevy engine brackets 916-67920 or 913-32902.

  • Standard GM 5-Position Tilt Steering Column, 32 Inch Long, Chrome
    Standard GM 5-Position Tilt Steering Column, 32 Inch Long, Chrome
    x
                These 5-position tilt columns are for those who want great  performance   at affordable pricing. Made from steel 2" tube. Standard 1"  DD output   shaft. Column accepts any 1969-94 GM car steering wheel or  aftermarket   adapter.
    • Chrome plated finish
    • 32" length
    • Floor shift applications
    • 1" DD output shaft
    • Standard GM wiring and plug
    • Includes tilt, turn and hazard levers/knob

    Be sure to include Painless Wiring's GM steering column pigtail kit (91064039) with your order for an easier installation.

  • GM Power Steering Pump With Chrome Reservoir
    GM Power Steering Pump With Chrome Reservoir
    x
                

    We offer this Saginaw power steering pump with a new reservoir, billet cap, chrome hardware and new dipstick. Desirable early style 1965-79 pump with threaded and keyed shaft for easy pulley installation. Available in chrome. Hoses available from local parts stores.

    Pump has a 3/8" hose barb for return line and a female 5/8"-18 inverted flare fitting for the high pressure outlet. Pulley not included. Use bracket available below.

    Pulleys available separately. AN6 fittings shown for racing applications. 

  • 1965-1991 GM 525 Manual Steering Box
    1965-1991 GM 525 Manual Steering Box
    x
                

    This Saginaw manual steering box fits many GM applications from 1965-1991 and probably many more. It accepts either our universal pitman arm (702-2940) or your stock GM arm (small style, like our 910-32552). Box has a 25:1 ratio (6.25 turns lock-to-lock) with a 3-13/16" long input shaft with 3/4" 30-splines.

    • Input shaft is 3/4"-30 spline
    • 6.25 turns lock to lock
    • 25:1 ratio
    • If you turn the input clockwise, the output also turns clockwise.
    • Stock specifications on this gear refer to it as 6 rounds lock to lock for a 24:1 ratio.
    • 36 Spline
    • 1.058 Diameter Top of Splines
    • 1.100 Diameter Middle of Splines
    • 1.124 Diameter Bottom of Splines

    Note: Steering box is not adjusted at the facotry and therefore, it is necessary that the steering box be adjusted upon installation per the instructions as provided on the PDF instruction sheet.

    1965-1991 GM Manual Steering Box Installation Instructions (PDF)

  • Standard GM 5-Position Tilt Steering Column, 33 Inch Long, Chrome
    Standard GM 5-Position Tilt Steering Column, 33 Inch Long, Chrome
    x
                These 5-position tilt columns are for those who want great  performance    at affordable pricing. Made from steel 2" tube. Standard 1"  DD output    shaft. Column accepts any 1969-94 GM car steering wheel or   aftermarket   adapter.
    • Chrome plated finish
    • 33" length
    • Floor shift applications
    • 1" DD output shaft
    • Standard GM wiring and plug
    • Includes tilt, turn and hazard levers/knob

    Be sure to include Painless Wiring's GM steering column pigtail kit (91064039) with your order for an easier installation.

  • Standard GM 5-Position Tilt Steering Column, 30 Inch Long, Plain
    Standard GM 5-Position Tilt Steering Column, 30 Inch Long, Plain
    x
                These 5-position tilt columns are for those who want great  performance  at affordable pricing. Made from steel 2" tube. Standard 1"  DD output  shaft. Column accepts any 1969-94 GM car steering wheel or  aftermarket  adapter.
    • Plain steel finish
    • 30" length
    • Floor shift applications
    • 1" DD output shaft
    • Standard GM wiring and plug
    • Includes tilt, turn and hazard levers/knob

    Be sure to include Painless Wiring's GM steering column pigtail kit (91064039) with your order for an easier installation.

  • Sweet Mfg. 208-08210 1964-88 GM Power Steering Box, 8:1, .210 Valve
    Sweet Mfg. 208-08210 1964-88 GM Power Steering Box, 8:1, .210 Valve
    x
                

    These Sweet 700 Series Sportsman power steering boxes have new quick ratio gear sets in them which significantly speeds up the steering. This steering box features new inner working components with a re-manufactured housing. Fits most 1964-1988 GM passenger cars.

    -6 AN hose fittings. 13/16" 36-spline input.

    When using a steering quickener, we recommend using a .185 valve steering box. Anything higher will be extremely hard to steer!

    IMCA Approved 

  • Standard GM 5-Position Tilt Steering Column, 30 Inch, Column Shift, Chrome
    Standard GM 5-Position Tilt Steering Column, 30 Inch, Column Shift, Chrome
    x
                These 5-position tilt columns are for those who want great  performance     at affordable pricing. Made from steel 2" tube. Standard 1"  DD  output    shaft. Column accepts any 1969-94 GM car steering wheel or    aftermarket   adapter.
    • Chrome plated finish
    • 30" length
    • Column shift applications
    • 1" DD output shaft
    • Standard GM wiring and plug
    • Includes tilt, turn and hazard levers/knob

    Be sure to include Painless Wiring's GM steering column pigtail kit (91064039) with your order for an easier installation.

  • 1964-88 GM Power Steering Box, 3/4 Inch 30-Spline Input
    1964-88 GM Power Steering Box, 3/4 Inch 30-Spline Input
    x
                

    Remanufactured GM 800 Series power steering boxes have a 16:1 ratio and were used in midsize GM cars from 1964-1988. Painted black and include -6 AN fittings to make it easier to fabricate hoses if needed. Pitman arm not included. No core return is required.

    Note: Not compatible with OEM 45° flare fittings.

  • Standard GM 5-Position Tilt Steering Column, 33 Inch, Column Shift, Chrome
    Standard GM 5-Position Tilt Steering Column, 33 Inch, Column Shift, Chrome
    x
                These 5-position tilt columns are for those who want great  performance     at affordable pricing. Made from steel 2" tube. Standard 1"  DD  output    shaft. Column accepts any 1969-94 GM car steering wheel or    aftermarket   adapter.
    • Chrome plated finish
    • 33" length
    • Column shift applications
    • 1" DD output shaft
    • Standard GM wiring and plug
    • Includes tilt, turn and hazard levers/knob

    Be sure to include Painless Wiring's GM steering column pigtail kit (91064039) with your order for an easier installation.

  • Standard GM 5-Position Tilt Steering Column, 30 Inch, Column Shift, Plain
    Standard GM 5-Position Tilt Steering Column, 30 Inch, Column Shift, Plain
    x
                These 5-position tilt columns are for those who want great  performance    at affordable pricing. Made from steel 2" tube. Standard 1"  DD output    shaft. Column accepts any 1969-94 GM car steering wheel or   aftermarket   adapter.
    • Plain steel finish
    • 30" length
    • Column shift applications
    • 1" DD output shaft
    • Standard GM wiring and plug
    • Includes tilt, turn and hazard levers/knob

    Be sure to include Painless Wiring's GM steering column pigtail kit (91064039) with your order for an easier installation.

  • 1968-72 Chevelle A-Body Idler Arm
    1968-72 Chevelle A-Body Idler Arm
    x
                We stock these hard-to-find idler arms for GM A-Bodies.
            
  • Single Groove Power Steering Pump Pulley, Machined Aluminum
    Single Groove Power Steering Pump Pulley, Machined Aluminum
    x
                

    These power steering pump pulleys for a long water pump are available in plain(Pln), polished(Pol), or chrome(Chr).  Pulley listed is 5-3/4" in diameter.

    • Works only with the long pump and matching long pump pulleys
    • Works with our Saginaw pump (91032908)
    • Bolt-on pulley
    • 5-3/4" in diameter
    • Measures .852" from the front of the pulley to the center of the V-belt groove just as it would be mounted on the pump
    • Choose from plain, polished, or chome finish.
  • Ididit 1520690051 Plain Black Tilt Steering Column, 1969-72 Chevelle
    Ididit 1520690051 Plain Black Tilt Steering Column, 1969-72 Chevelle
    x
                The hot rod experts at Ididit put a lot of time and  research into these retrofit steering columns, ensuring a perfect fit  for your specific vehicle. These Ididit retrofit floor shift steering  columns are designed to fit in the factory location and, in many cases,  will put the steering wheel back in its original location. They include  self-canceling turn signals, 4-way flashers and knobs and handles. The  columns are designed for use with aftermarket steering wheels. 
    • For '69-'72 Chevelle
    • Bolt-In
    • Black powdercoated
    • 8 position tilt
    • With key
    • Self canceling turn signals
    • 4 way flasher
    • Knob & Levers
    • 3-7/8 wiring plug
    • 1" - 48 lower shaft
    • Uses original under dash mount and floor mount along with the factory wiring and plug
    • Made in the USA
  • 1964-67 Chevelle 7/8 Idler Arm
    1964-67 Chevelle 7/8 Idler Arm
    x
                
    • '64-'67 Chevelle idler arm
    • For use with 7/8" diameter center link stub
    • Check your application before ordering
  • Unisteer 8010740-01 1968-72 Chevelle Power Rack & Pinion Kit w/ Pump
    Unisteer 8010740-01 1968-72 Chevelle Power Rack & Pinion Kit w/ Pump
    x
                

    This rack & pinion conversion kit from Unisteer will give your 1968-1972 Chevelle the ease of steering and road feel modern cars have. Precisely engineered to bolt in without sacrificing steering geometry or safety.

    Kit includes the power rack, mounting bracket, power steering pump kit with a clip-on resevoir for a long water pump, and steering shaft kit designed for a factory steering column as well as all the necessary hardware to complete the installation. The kit features a black powder coated heavy-duty bracket that eliminates any twisting or flexing present in other kits.

    910-32309 Instructions (PDF)

  • Elgin Industries ES333RL 1964-67 Chevelle A-Body Outer Tie Rod
    Elgin Industries ES333RL 1964-67 Chevelle A-Body Outer Tie Rod
    x
                

    We stock these hard-to-find tie rods and adjustment sleeves for GM A-Bodies. 

    Fits:

    • 1964-67 Buick A-Body (Skylark, Special, Gran Sport & Sport Wagon)
    • 1964-67 Chevy A-Body (Chevelle, Malibu, Monte Carlo, El Camino)
    • 1964-67 Olds A-Body (F85, 442, Cutlass, Hurst Olds)
    • 1964-67 Pontiac A-Body (LeMans, GTO)

     

  • 1964-88 GM 800 Power Steering Box, 13/16 Inch 36-Spline Input
    1964-88 GM 800 Power Steering Box, 13/16 Inch 36-Spline Input
    x
                

    Remanufactured GM 800 Series power steering boxes have a 16:1 ratio and were used in midsize GM cars from 1964-1988. Painted black and include -6 AN fittings to make it easier to fabricate hoses if needed. Pitman arm not included. No core return is required.

    Note: Not compatible with OEM 45° flare fittings.

  • 1971-72 Chevelle A-Body Tie Rod & Ball Joint Kit
    1971-72 Chevelle A-Body Tie Rod & Ball Joint Kit
    x
                

    We make it easy to order replacement parts for your 1971-1972 GM A-Body. This one part number includes:

    • outer tie rods
    • tie rod sleeves
    • center link
    • idler arm
    • upper ball joints
    • lower ball joints
  • Standard GM 5-Position Tilt Steering Column, 32 Inch, Column Shift, Chrome
    Standard GM 5-Position Tilt Steering Column, 32 Inch, Column Shift, Chrome
    x
                These 5-position tilt columns are for those who want great  performance     at affordable pricing. Made from steel 2" tube. Standard 1"  DD  output    shaft. Column accepts any 1969-94 GM car steering wheel or    aftermarket   adapter.
    • Chrome plated finish
    • 32" length
    • Column shift applications
    • 1" DD output shaft
    • Standard GM wiring and plug
    • Includes tilt, turn and hazard levers/knob

    Be sure to include Painless Wiring's GM steering column pigtail kit (91064039) with your order for an easier installation.

  • Ididit 1120640010 Plain Tilt Steering Column, 1964-65 Chevelle
    Ididit 1120640010 Plain Tilt Steering Column, 1964-65 Chevelle
    x
                The hot rod experts at Ididit put a lot of time and  research into these retrofit steering columns, ensuring a perfect fit  for your specific vehicle. These Ididit retrofit floor shift steering  columns are designed to fit in the factory location and, in many cases,  will put the steering wheel back in its original location. They include  self-canceling turn signals, 4-way flashers and knobs and handles. The  columns are designed for use with aftermarket steering wheels. 
    • Fits 64-65 Chevelle/ El Camino & GTO
    • 8 position tilt
    • Self canceling turn signals
    • 4 way flashers
    • Knobs & Levers
    • 3-7/8 wiring plug
    • 3/4 -36 lower shaft
    • Paintable steel finish
  • 1964 Fullsize, 1968-72 Midsize GM Pitman Arm
    1964 Fullsize, 1968-72 Midsize GM Pitman Arm
    x
                

    OEM stock replacement pitman arm fits steering box on 1964 Chevy Fullsize and 1968-72 GM Midsize.

    For manual steering box only.

  • Gates 352300 1964-1968 Chevelle Power Steering Hose
    Gates 352300 1964-1968 Chevelle Power Steering Hose
    x
                

    These are Gates brand power steering hose assemblies made to OEM specifications are authentic reproductions of the originals. They work on 1964-68 Chevelle applications and include fittings already assembled.

    • End (1) type: Male inverted flare
    • End (2) type: Male inverted flare
    • End (1) Diameter: .375"
    • End (2) Diameter: .4375"
    • Length: 27.375"
    • 45° IFM threads
    • 1964-68 Chevelle
      • 283 and 327 c.i. engines 

     

  • GM Aluminum Carbon Fiber Steering Wheel Adapter, 9 Bolt
    New
    GM Aluminum Carbon Fiber Steering Wheel Adapter, 9 Bolt
    x
                

    These billet aluminum horn buttons are designed for use with 1967-1994 GM car and pickup factory steering columns.  They simply press into the steering wheel adapter.

    • Smooth carbon fiber hydrographic billet aluminum steering wheel adapter
    • Fits 1967-1994 Chevy/GM cars and trucks
    • Mounting pattern: 9 hole
    • Diameter: 3-1/4"
  • 1964-67 Chevelle A-Body Tie Rod & Ball Joint Kit
    1964-67 Chevelle A-Body Tie Rod & Ball Joint Kit
    x
                

    We make it easy to order replacement parts for your 1964-1967 GM A-Body. This one part number includes:

    • outer tie rods
    • inner tie rods
    • tie rod sleeves
    • center link
    • idler arm
    • upper ball joints
    • lower ball joints
  • 1964-67 Chevelle A-Body Idler Arm
    1964-67 Chevelle A-Body Idler Arm
    x
                We stock these hard-to-find idler arms for GM A-Bodies.
            
  • Elgin Industries ES406L 1968-72 Chevelle A-Body Inner Tie Rod
    Elgin Industries ES406L 1968-72 Chevelle A-Body Inner Tie Rod
    x
                

    We stock these hard-to-find tie rods for GM A-Bodies.

    Fits:

    • 1968-72 Buick A-Body (Skylark, Special, Gran Sport & Sport Wagon)
    • 1968-72 Chevy A-Body (Chevelle, Malibu, Monte Carlo, El Camino)
    • 1968-72 Olds A-Body (442, Cutlass, Hurst Olds)
    • 1968-72 Pontiac A-Body (LeMans, GTO)

     

     

  • GM Aluminum Woodgrain Steering Wheel Adapter, 9 Bolt
    New
    GM Aluminum Woodgrain Steering Wheel Adapter, 9 Bolt
    x
                These billet aluminum steering wheel adapters are designed for use with 1967-1994 GM car and pickup factory steering columns and common 9 bolt steering wheel setups.
    • Wood grain hydrographic billet aluminum steering wheel adapter
    • Fits our billet 9 bolt steering wheel setups
    • Mounting pattern: 9 hole
    • Diameter: 3-1/4"
  • Gates 355260 1972-1974 Chevelle Power Steering Hose
    Gates 355260 1972-1974 Chevelle Power Steering Hose
    x
                Quality Gates brand direct replacements for original '70-'74 Chevrolet Chevelle power steering hoses.
            
  • Standard GM 5-Position Tilt Steering Column, 33 Inch, Column Shift, Plain
    Standard GM 5-Position Tilt Steering Column, 33 Inch, Column Shift, Plain
    x
                These 5-position tilt columns are for those who want great  performance     at affordable pricing. Made from steel 2" tube. Standard 1"  DD  output    shaft. Column accepts any 1969-94 GM car steering wheel or    aftermarket   adapter.
    • Plain steel finish
    • 33" length
    • Column shift applications
    • 1" DD output shaft
    • Standard GM wiring and plug
    • Includes tilt, turn and hazard levers/knob

    Be sure to include Painless Wiring's GM steering column pigtail kit (91064039) with your order for an easier installation.

  • 1965-1967 Chevrolet A-Body Center Link
    1965-1967 Chevrolet A-Body Center Link
    x
                

    We stock these hard-to-find 1965-1967 Chevrolet A-Body center link includes (2) castle nuts, (2) gease fittings, and (2) cotter pins.

    • Fits 1965-1967 Chevelle (Will work with '64 with use of 65'-67 pitman and idler arms)
    • 14.5” eye-to-eye (uses 7/8" idler arm)
    • 23.5" pin-to-pin
    • 1/2"-20 Threads
    • 1/2" Tapered Holes
    • Uses 7/8" Idler arm
    • O.D. is .922 or 15/16” - this is slightly bigger than the normally offered 13/16” or 7/8”
  • Gotta Show 131151 1965-79 Braided GM Power Steering Hoses
    Gotta Show 131151 1965-79 Braided GM Power Steering Hoses
    x
                

    These stainless steel braided power steering hose kits allow you to fit them to most 1965-1979 GM car & truck boxes with flare fittings.

    • 11/16" inverted flare pressure line fitting
    • 5/8" inverted flare return line fitting
    • 30" line lengths (can be shortened)

    Power Steering Line Installation Instructions (PDF)  

  • Sweet 1964-88 GM Power Steering Box, 12:1, .185 Valve, 3/4 Inch 30-Spline
    Sweet 1964-88 GM Power Steering Box, 12:1, .185 Valve, 3/4 Inch 30-Spline
    x
                

    These Sweet 700 Series Sportsman power steering boxes have new quick ratio gear sets in them which significantly speeds up the steering. This steering box features new inner working components with a re-manufactured housing. Fits most 1964-1988 GM passenger cars.

    -6 AN hose fittings.

    When using a steering quickener, we recommend using a .185 valve steering box. Anything higher will be extremely hard to steer!

    IMCA Approved 

  • Sweet Mfg. 208-12185 1964-88 GM Power Steering Box, 12:1, .185 Valve
    Sweet Mfg. 208-12185 1964-88 GM Power Steering Box, 12:1, .185 Valve
    x
                

    These Sweet 700 Series Sportsman power steering boxes have new quick ratio gear sets in them which significantly speeds up the steering. This steering box features new inner working components with a re-manufactured housing. Fits most 1964-1988 GM passenger cars.

    -6 AN hose fittings. 13/16" 36-spline input.

    When using a steering quickener, we recommend using a .185 valve steering box. Anything higher will be extremely hard to steer!

    IMCA Approved 

  • Gates 352870 1970-74 Chevelle Power Steering Pressure Return Hose
    Gates 352870 1970-74 Chevelle Power Steering Pressure Return Hose
    x
                These are Gates brand power steering hose assemblies made to OEM specifications.
            
Goto Previous PagePrevious Page
1 2