Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop 1958-96 Impala At Speedway Motors

Introduced in 1958, the Impala was Chevrolets premeire model through 1965. It was the best selling automobile in the country during that stretch. Speedway recognizes this classics beautify and prestige, that's why we offer a huge line of Impala parts and award winning technical serivce to help with any issues. From direct fit radiators to complete suspension kits, we've got the parts you want at prices you'll love.

"Muscle Car, 1958-96 Impala" Page 1 of 6

Garage Sale (0)

  • AFCO 6845F Reactor Front Drag Shocks - Chevrolet/GM/Dodge
    AFCO 6845F Reactor Front Drag Shocks - Chevrolet/GM/Dodge
    x
                

    AFCO Single Adjustable Monotube FRONT shocks are an economical alternative to the fully double adjustable design. The single adjustable gives you the ability to adjust rebound dampening control without affecting the compression dampening characteristics of the shock. Plus, with AFCO's exclusive "BNC" valving, these shocks eliminate bounce caused by the impact after a wheel stand.

    • Quicker R.T.'s
    • Gas Mono-tube design for superior tuning and performance
    • Rebound adjustable only - will not bleed over to compression
    • BNC Valving eliminates front end bounce
    • Can be upgraded to a coil-over shock
    • 100% co-Tested and Serial Numbered

    Fits most '55-'96 GM chassis

    Fits 1979-1992 Dodge Ram half-ton 2WD pickup trucks.

    See Applications tab for fittment.

  • 1968 Belair/Biscayne LED Tail/Stop Lights
    1968 Belair/Biscayne LED Tail/Stop Lights
    x
                

    Face it, it's hard to see those tail lights on older cars. Now is the time to change out those broken or faded tail lights for new LED versions. 

    • 40 Super Bright LEDS
    • Polycarbonate Lens
    • Epoxy Coated, Fully Sealed Electronics, 1157 Plug
    • Solid State Circuit Boards Designed for 7.7 - 14.0 VDC

     

  • Hawk HB119A.594 Performance 1978-Up HPS Brake Pads, DTC-15
    Hawk HB119A.594 Performance 1978-Up HPS Brake Pads, DTC-15
    x
                

    Get superior stopping power with Hawk Performance! Hawk Performance brake pads have been successful in virtually all forms of motorsports for over 16 years. This success helps Hawk Performance enjoy the benefits of the “Win on Sunday, Sell on Monday,” philosophy. Hawk is one of few brake pad manufacturers that can deliver on the promise, “Race Proven – Street Legal.”

    • Increased stopping power
    • High friction/torque hot or cold
    • Gentle on rotors
    • Extended pad life
    • Low dust
    • Virtually noise-free

    Tech Tip:  Only use full metallic pads on coated rotors.

    Sold as a set of 4, 1 set will be needed to outfit 2 calipers.

    Brake Pad Brand Guide (Link) 

    Learn how to properly Bed-In your brake pads by reading our tech article.  Bedding-In Brake Pad Procedure.

     

  • Howe Racing 22430 Repl Ball Joint Stud for 917-22413 K6141 Style
    Howe Racing 22430 Repl Ball Joint Stud for 917-22413 K6141 Style
    x
                

    The alloy steel ball studs are process coated for low friction and long wear.  You can feel the difference in smooth travel and easy steering effort.

    The rugged steel housing will withstand impacts that would destroy a standard automotive ball joint; typically only the ball stud will need replacement. Our standard ball studs are dimensionally the same as OEM and different length ball studs are available to allow easy geometry changes.

    • 1971-1976 Chevy Impala 

    For Howe Precision Ball Joints ONLY.

  • 1958-64 Chevy Full-size Car Brake Booster Combo, Disc/Drum
    1958-64 Chevy Full-size Car Brake Booster Combo, Disc/Drum
    x
                

    When you put modern disc brakes on the front of your 1958-1964 Chevy full-size car (Bel-Air, Biscayne, Impala), you should update the master cylinder as well. Stock 4-wheel drum master cylinders do not have the capacity to supply the proper amount of pressure for front disc brakes. For best results, we recommend using this simple, bolt-on master cylinder booster kit on all front disc brake conversions.

    • 8" dual diaphragm booster
    • 1" bore master cylinder
    • GM style proportioning/metering combination valve
    • Master cylinder has outlets on both sides for ease of plumbing
    • Includes plugs for unused outlets on opposite side of master cylinder

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.

  • Aluminum Fan Shroud Kit for 22 Inch Radiator, Engine Driven Fan
    Aluminum Fan Shroud Kit for 22 Inch Radiator, Engine Driven Fan
    x
                

    These universal fit aluminum fan shroud kits can be built to fit many applications with a belt-driven fan. The adjustable collar will accommodate 15"-20" fan diameters.

    Measures 19" tall x 16-3/4" wide x 2-5/8" deep. Works well with Speedway & Afco 24" wide radiators and will work with the Speedway & Afco 22" wide radiators with slight trimming of the width of the shroud.

    • Made for exact fit of many Muscle Car and Hotrod radiators
    • Allows the installer the choice of off center, side-to-side and above the radiator fan positioning
    • For crossflow or downflow radiator mounting
    • Includes fully-formed shroud of .063" lightweight aircraft aluminum
    • 3" trimmable collar
    • Adjustable collar; adjusts for 15-20" fan diameters
    • Includes all the necessary hardware and mounting instructions
    • Measures 19" tall x 16-3/4" wide x 2-5/8" deep

    Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance.

    Fan Shroud Installation Instructions (PDF)

     

  • Heater Core for 1969-70 GM Full Size Passenger Car
    Heater Core for 1969-70 GM Full Size Passenger Car
    x
                For your 1969-70 GM full size passenger car, use a 100% new  heater core, not a marginal recore like others sell. All heater cores  are a direct fit factory replacement for applications not originally  equipped with A/C.
    • All new construction
    • Direct fit factory replacement for 1969-70 GM FULL SIZE
    Note: These heater cores may be shipped either aluminum or copper/brass, depending on application & inventory/stock.
  • Heater Core for 1963-64 GM Mid Size Passenger Car w/ Factory Air
    Heater Core for 1963-64 GM Mid Size Passenger Car w/ Factory Air
    x
                For your 1963-64 GM Full Size passenger car, use a 100% new heater core,   not a marginal   recore like others sell. All heater cores are a   direct fit  factory replacement for applications with A/C. 
    • All new construction
    • Direct fit factory replacement for 1963-64 GM Full Size passenger car with factory air
    • Please note: factory air applications

    Note: These heater cores may be shipped either aluminum or copper/brass, depending on application & inventory/stock. 

  • AFCO 20038 Standard 1971-76 GM B-Body Lower Ball Joint
    AFCO 20038 Standard 1971-76 GM B-Body Lower Ball Joint
    x
                

    Not all ball joint are created equal.  That's why AFCO uses the best components from the top manufacturers.  There are many different design characteristics and manufacturing processes that account for the quality and performance of ball joints.  These joints will give you the AFCO advantage!

    See Application tab for corresponding vehicle models. 

  • Basic Disc Brake Kit, 1955-64 Chevy Fullsize Car, Stock Spindle
    Basic Disc Brake Kit, 1955-64 Chevy Fullsize Car, Stock Spindle
    x
                

    This kit allows you to put front disc brakes on your 1955-64 fullsize Chevy passenger car (Bel-Air, Biscayne, Impala, 150 Series, 210 Series) OEM spindles (will NOT work with dropped spindles). It will work with 14" wheels intended for disc brakes, as well as most 15" (or larger) wheels. Works with 5 on 4-3/4 inch bolt patterns.

    Use with our 11" rotor 910-65390 and metric caliper 910-31045 (see Notes). This kit will increase track width 3/8" per side or or 3/4" total when installed.

    Kit Includes:

    • Brake brackets
    • Hardware
    916-31931 Instructions (PDF)
  • O-Ring to Inverted Flare Power Steering Adapter
    O-Ring to Inverted Flare Power Steering Adapter
    x
                

    If you have a power steering pump using late model style O-ring sealed hoses that you need to adapt to traditional inverted flare hoses, this inverted flare adapter is a simple fix. Simply insert the adapter into the flow control fitting and then install your inverted flare hose.

    Use to convert from 16mm o-ring to 5/8" inverted flare style.

  • Speedway 1970-02 GM K6145 Style Lower Ball Joint
    Speedway 1970-02 GM K6145 Style Lower Ball Joint
    x
                

    Factory replacement lower ball joints.

    See Application tab for corresponding vehicle models.

  • Howe Racing 22460 Repl Ball Joint Stud for 917-22419 K6117 Style
    Howe Racing 22460 Repl Ball Joint Stud for 917-22419 K6117 Style
    x
                

    The alloy steel ball studs are process coated for low friction and long wear.  You can feel the difference in smooth travel and easy steering effort.

    The rugged steel housing will withstand impacts that would destroy a standard automotive ball joint; typically only the ball stud will need replacement. Our standard ball studs are dimensionally the same as OEM and different length ball studs are available to allow easy geometry changes.

    • 1971-1995 Chevy & GMC Trucks 

    For Howe Precision Ball Joints ONLY.

  • Heater Core for 1971-90 GM Full Size Passenger Car
    Heater Core for 1971-90 GM Full Size Passenger Car
    x
                For your 1971-90 GM Full Size passenger car, use a 100% new heater core, not a marginal   recore like others sell. All heater cores listed are a direct fit  factory replacement for applications without A/C. 
    • All new construction
    • Direct fit factory replacement
    • Please note: non air applications

    Note: These heater cores may be shipped either aluminum or copper/brass, depending on application & inventory/stock. 

  • GM Disc/Drum Proportioning Valve for 1/2-20, 9/16-18 Outlets
    GM Disc/Drum Proportioning Valve for 1/2-20, 9/16-18 Outlets
    x
                

    These proportioning valves are similar to what GM used on many cars in the 70's. They are non-adjustable and may require an adjustable valve in the rear brakes (if needed). Block incorporates metering (for front brakes) and proportioning (for rear brakes) into one unit. For use with front disc, rear drum brake systems.

    Includes hard lines to connect to a master cylinder with 1/2"-20 and 9/16"-18 outlets.

    GM Proportioning Valve Plumbing Instructions (PDF)

  • QA1 1210-502 Adjustable Ball Joint Housing
    QA1 1210-502 Adjustable Ball Joint Housing
    x
                Housing only for ball joint #721-10102 
            
  • 1955-70 Chevy Replacement Upper Ball Joint, Fullsize Car
    1955-70 Chevy Replacement Upper Ball Joint, Fullsize Car
    x
                

    If your car still has ball joints that are riveted in, they are now over 50 years old. These new OEM ball joints feature a metal gusher bearing design that enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability. Greaseable socket design allows new lubricant to flush contaminants from the assembly, reducing corrosion and wear.

    These new replacement upper ball joints fit the following chassis:

    • '55-'57 Chevy car upper
    • '58-'64 Chevy car upper
    • '65-'70 Chevy fullsize car upper
    • '53-'82 Corvette upper

    Ball Joint Tech Tips - Grease Zerks (PDF)

    Ball Joint Tech Tips - Boot Installation (PDF)

    Ball Joint Tech Tips - Bearing Failure (PDF)

  • 1964-88 GM Power Steering Box, 3/4 Inch 30-Spline Input
    1964-88 GM Power Steering Box, 3/4 Inch 30-Spline Input
    x
                

    Remanufactured GM 800 Series power steering boxes have a 16:1 ratio and were used in midsize GM cars from 1964-1988. Painted black and include -6 AN fittings to make it easier to fabricate hoses if needed. Pitman arm not included. No core return is required.

    Note: Not compatible with OEM 45° flare fittings.

  • 1965-1991 GM 525 Manual Steering Box w/ 3/4-30 Input Spline
    1965-1991 GM 525 Manual Steering Box w/ 3/4-30 Input Spline
    x
                

    This Saginaw manual steering box fits many GM applications from 1965-1991 and probably many more. It accepts either our universal pitman arm (702-2940) or your stock GM arm (small style, like our 910-32552). Box has a 25:1 ratio (6.25 turns lock-to-lock) with a 3-13/16" long input shaft with 3/4" 30-splines.

    • Input shaft is 3/4"-30 spline
    • 6.25 turns lock to lock
    • 25:1 ratio
    • If you turn the input clockwise, the output also turns clockwise.
    • Stock specifications on this gear refer to it as 6 rounds lock to lock for a 24:1 ratio.
    • 36 Spline
    • 1.058 Diameter Top of Splines
    • 1.100 Diameter Middle of Splines
    • 1.124 Diameter Bottom of Splines

    Note: Steering box is not adjusted at the facotry and therefore, it is necessary that the steering box be adjusted upon installation per the instructions as provided on the PDF instruction sheet.

    1965-1991 GM Manual Steering Box Installation Instructions (PDF)

  • AFCO 20128DC Low Profile Aluminum Threaded Spring Seat Only
    AFCO 20128DC Low Profile Aluminum Threaded Spring Seat Only
    x
                Low Profile Coil-over kit & replacement parts for AFCO Hot Rod & Pro Touring Series shocks. Clear coated billet aluminum.
            
  • 1969-1972 GM Midsize 11 Inch Brake Rotor, 5 on 4 3/4 Inch
    1969-1972 GM Midsize 11 Inch Brake Rotor, 5 on 4 3/4 Inch
    x
                

    We stock those hard-to-find replacement brake rotors for your 1969-1972 GM midsize car. These rotors are specifically designed for the rigors of dirt track racing.  Drilled with a 5-on-4.75" bolt circle. Includes 7/16" fine quick-start wheel studs (installed).

    • 1969-1972 GM Midsize
    • 11 Inch Brake Rotor
    • 5 on 4-3/4 Inch
    • 7/16" fine studs installed
    • 11" diameter x 1"
    • IMCA Approved

    This rotor is designed for dirt track applications and should NOT be used for asphalt racing.

     

     

  • GM Disc/Disc Proportioning Valve for 3/8-24 Outlets
    GM Disc/Disc Proportioning Valve for 3/8-24 Outlets
    x
                

    These proportioning valves are similar to what GM used on many cars in the 70's. They are non-adjustable and may require an adjustable valve in the rear brakes (if needed). Block incorporates metering (for front brakes) and proportioning (for rear brakes) into one unit. For use with four-wheel disc brake systems.

    Includes hard lines to connect to a master cylinder with 3/8"-24 outlets.

    910-31366 Instructions (PDF)

  • Elgin Industries ES378R 1969-70 Fullsize Chevy Inner Tie Rod End
    Elgin Industries ES378R 1969-70 Fullsize Chevy Inner Tie Rod End
    x
                

    We stock these hard to find replacement tie rods that are a must when rebuilding your classic vehicle.  They will give your 1969-70 Fullsize Chevy overall better handling and a positive feel while cruising the strip.  These inner tie rod ends feature right hand threads.  Our outer tie rod ends are left hand thread and the adjuster sleeve makes the adjustment for toe in by rotating clockwise or counter clockwise.

    • Meets or exceeds factory OEM specifications
    • Overall better handling and a positive feel
    • Right Hand Threads
    • 1969-70 Chevy passenger cars

     

  • 1965-67 Chevelle Heater Core
    $74.99
    1965-67 Chevelle Heater Core
    x
                For a 1965-1967 Chevelle. These are 100% new heater cores. Not marginal recores like others sell. All heater cores listed are for cars without factory air conditioning. 
            
  • AFCO 3870F/BNC Eliminator BNC Front Shock, 1993-02 Camaro/Firebird
    AFCO 3870F/BNC Eliminator BNC Front Shock, 1993-02 Camaro/Firebird
    x
                

    See Application tab for specific fittment information.

    AFCO's Eliminator BNC Valving Twin Tube Double Adjustable Shocks eliminate bounce. The BNC shocks are designed to better absorb the impact of the car after a wheel stand launch. Works great in Stock, Super Stock, Outlaw 10.5, True Street, and other drag racing classes.

    • 106-3870FBNC
      • Body Mount: Tie Bar Mount w/ 2.625" bolt centers
      • Shaft Mount: 1/2" I.D. Bearing (1.06" wide)
    • Lightweight aluminum construction also helps dissipate heat
    • Rebound settings are adjusted via a shaft-mounted knob with 32 clicks
    • Compression settings are adjusted via a body-mounted know with 32 clicks
    • Smooth, Ultra Low Friction rod guide
    • Low resistance allows internals to function to their fullest potential
    • Almost no "stiction" to interfere with putting the power down
    • Coil-over Ready w/ purchase of kit 106-20135D

    Can be converted to a coil-over with kit 106-20135D (sold separately, except 106-3870FBNC).

  • Howe Racing 22470 Repl Ball Joint Stud for 917-22420 K6145 Style
    Howe Racing 22470 Repl Ball Joint Stud for 917-22420 K6145 Style
    x
                

    The alloy steel ball studs are process coated for low friction and long wear.  You can feel the difference in smooth travel and easy steering effort.

    The rugged steel housing will withstand impacts that would destroy a standard automotive ball joint; typically only the ball stud will need replacement. Our standard ball studs are dimensionally the same as OEM and different length ball studs are available to allow easy geometry changes.

    • 1977-1989 Impala
    • 1970-1981 Camaro
    • 1973-1988 Chevelle & Malibu

    For Howe Precision Ball Joints ONLY.

  • AFCO 20038LF Low Friction 1971-76 Impala/Caprice Lower Ball Joint
    AFCO 20038LF Low Friction 1971-76 Impala/Caprice Lower Ball Joint
    x
                

    AFCO Low Friction Ball Joints are designed with 2 ft. lbs. of resistance, the force required to move the stud of the ball joint.  Compare this with standard replacement joints, with as high as 50 ft. lbs. of resistance.  A difference you can feel!

    It is critical to handling that suspension components be as free as possible to move.  Low friction ball joints allow the suspension to give rather than allowing the tire to bounce over rough surfaces.  Low tire pressures magnify the need to minimize friction in the suspension.

    1971-1976 GM B-Body

    • Chevrolet Impala
    • Chevrolet Caprice
    • Chevrolet Bel Air
    • Buick LeSabre
    • Buick Centurion
    • Oldsmobile Delta 88
    • Oldsmobile Delta 98
    • Oldsmobile Custom Cruiser
    • Pontiac Bonneville

    Checking Ball Joint Wear (PDF)

  • 1964-1974 Big Block Chevy Long Tube Headers, AHC Coated
    1964-1974 Big Block Chevy Long Tube Headers, AHC Coated
    x
                

    These headers are just the ticket for you B/B Chevy guys. They feature 2" primary tubes, 3-1/2" collectors, and must be used with original big block motor mounts to fit properly. Built with surface machined thick steel flanges for a great seal and mandrel bent mild steel tubing.

    Available with metallic ceramic coating. Unlike paint or chrome, metallic ceramic coating is easy to keep clean, resists rust and corrosion and will not discolor. Metallic ceramic coating also reduces underhood temperatures.

    Headers come with installation hardware, collector reducers, gaskets and instructions.

  • Dual 10 Inch Fan Shroud Combo, 22 W x 17 H
    Dual 10 Inch Fan Shroud Combo, 22 W x 17 H
    x
                

    These universal fit dual fan/aluminum shroud assemblies fit many applications. Features heavy duty SPAL fans.

    Radiator/Shroud Style Guide

    917-4007 Diagram (PDF) 

    Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance.

  • Elgin Industries ES312RL 1958-62 Chevy Outer Tie Rod
    Elgin Industries ES312RL 1958-62 Chevy Outer Tie Rod
    x
                

    We stock these hard to find replacement tie rods that are a must when rebuilding your classic vehicle.  They will give your Chevy passenger car overall better handling and a positive feel while cruising the strip.  These outer tie rod ends feature left hand threads. The inner tie rod ends are right hand thread and the adjuster sleeve makes the adjustment for toe in by rotating clockwise or counter clockwise.

    • Meets or exceeds factory OEM specifications
    • Overall better handling and a positive feel
    • Left Hand Threads
    • 1958-62 Chevy passenger car

     

  • 1958-64 Chevy Power Steering Conversion Kit
    1958-64 Chevy Power Steering Conversion Kit
    x
                

    You get a new 500 series power steering box, new centerlink, new pitman and idler arm. This is a straight bolt-in conversion, although '58-'60 cars need to order the 910-32582 idler arm adapter. Steering box uses inverted flare fittings, 11/16" fine on the pressure side and 5/8" fine thread on the return side. Has a 3/4" 30-spline input shaft.

    Note:  Some applications require slight modification to the radiator tank to clear the steering box.

    1958-1964 Chevy Power Steering Conversion Installation Instructions 

  • AFCO 3840F Eliminator Front Shocks, Double Adj - Chevrolet/GM, Dodge
    AFCO 3840F Eliminator Front Shocks, Double Adj - Chevrolet/GM, Dodge
    x
                

    AFCO Eliminator Twin Tube Adjustable FRONT shocks are built specifically for drag racing. Using advanced onboard diagnostics, AFCO developed the Eliminator Series to precisely control your race car at every point on the track. With the easy-to-use, repeatable "click" settings, this shock will give you unsurpassed traction.

    By allowing full control over both compression and rebound forces, Double Adjustable shocks give the tuner the ability to fine tune every aspect of the chassis movement to provide the ultimate in acceleration control and overall driveability.

    • Lightweight aluminum construction also helps dissipate heat
    • Rebound settings are adjusted via a shaft-mounted knob with 32 clicks
    • Compression settings are adjusted via a body-mounted know with 32 clicks
    • Smooth, Ultra Low Friction rod guide
    • Low resistance allows internals to function to their fullest potential
    • Almost no "stiction" to interfere with putting the power down
    • Coil-over Ready w/ purchase of kit 106-20135D
    Fits 1979-1992 Dodge Ram half-ton pickup trucks

    Fits most '55-'96 GM chassis

    See Application tab for fittment.

  • 1964-88 GM 800 Power Steering Box, 13/16 Inch 36-Spline Input
    1964-88 GM 800 Power Steering Box, 13/16 Inch 36-Spline Input
    x
                

    Remanufactured GM 800 Series power steering boxes have a 16:1 ratio and were used in midsize GM cars from 1964-1988. Painted black and include -6 AN fittings to make it easier to fabricate hoses if needed. Pitman arm not included. No core return is required.

    Note: Not compatible with OEM 45° flare fittings.

  • Wilwood Gator 1969-77 GM Mid-Size Brake Pads
    Wilwood Gator 1969-77 GM Mid-Size Brake Pads
    x
                

    Speedway Motors is your one-stop shop for GM 1969-77 Midsize caliper brake pads.

    Brake Pad Brochure (PDF)

    Tech Tip:  Only use full metallic pads on coated rotors.

    Sold as a pair of 2. One pair will outfit 1 caliper.

    Brake Pad Brand Guide (Link) 

    Learn how to properly Bed-In your brake pads by reading our tech article.  Bedding-In Brake Pad Procedure.

  • 1968 Caprice/Impala LED Tail/Stop Lights
    1968 Caprice/Impala LED Tail/Stop Lights
    x
                

    Face it, it's hard to see those tail lights on older cars. Now is the time to change out those broken or faded tail lights for new LED versions. 

    • 40 Super Bright LEDS
    • Polycarbonate Lens
    • Epoxy Coated, Fully Sealed Electronics, 1157 Plug
    • Solid State Circuit Boards Designed for 7.7 - 14.0 VDC

     

  • Speedway 156 1969-77 GM Mid-Size Brake Pads
    Speedway 156 1969-77 GM Mid-Size Brake Pads
    x
                

    Speedway Motors is your one-stop shop for GM 1969-77 Midsize caliper brake pads.

    Tech Tip:  Only use full metallic pads on coated rotors.

    Sold as a pair of 2. One pair will outfit 1 caliper.

    Brake Pad Brand Guide (Link) 

    Learn how to properly Bed-In your brake pads by reading our tech article.  Bedding-In Brake Pad Procedure.

     

  • Elgin Industries 4K5196 Upper Inner Control Arm Bushings, Pair
    Elgin Industries 4K5196 Upper Inner Control Arm Bushings, Pair
    x
                

    If you have a good set of control arms and inner shafts you really should change out those 50+ year old bushings.  These are high quality rubber replacements, just like the originals.

    910-32358 Upper sold in pairs.  

    • 1965-70 BelAir, Biscayne, Caprice & Impala
    • 1955-57 Chevy
    • Enough for one control arm
  • Elgin Industries 4K6134 Inner Control Arm Bushings, Lower
    Elgin Industries 4K6134 Inner Control Arm Bushings, Lower
    x
                

    If you have a good set of control arms and inner shafts you really should change out those 50+ year old bushings.  These are high quality rubber replacements, just like the originals. 

    • 1965-70 BelAir, Biscayne, Caprice & Impala
    • 1955-57 Chevy
  • Wilwood 15E-6102K Poly-E 1969-77 GM Mid-Size Brake Pads
    Wilwood 15E-6102K Poly-E 1969-77 GM Mid-Size Brake Pads
    x
                

    Speedway Motors is your one-stop shop for GM 1969-77 Midsize caliper brake pads.

    Brake Pad Brochure (PDF)

    Tech Tip:  Only use full metallic pads on coated rotors.

    Sold as a set of 4, 1 set will be needed to outfit 2 calipers.

    Brake Pad Brand Guide (Link) 

    Learn how to properly Bed-In your brake pads by reading our tech article.  Bedding-In Brake Pad Procedure.

  • Gates 361970 1972-76 Impala Power Steering Pressure Return Hose
    Gates 361970 1972-76 Impala Power Steering Pressure Return Hose
    x
                

    These are Gates brand power steering hose assemblies made to OEM specifications. 

    Fits:

    • 1972-76 B-Body (Impala, Caprice)
Goto Previous PagePrevious Page
1 2 3 4 5 6