Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Muscle Car Headers & Exhaust At Speedway Motors

Speedway Motors has the muscle car headers and mufflers you need, at a price you can afford. Check out our huge inventory of chassis headers, LS1 swap headers and tight-fit block hugger headers, all available with durable ceramic AHC coating, polished, or stainless steel. Don't forget about our cast iron exhaust manifolds and dual exhaust kits as well. With an awesome selection of high performance Flowmaster mufflers, exhaust wrap, glasspacks, and exhaust tips, Speedway can help you get the roar you want from your muscle car without the roar from your wife for spending too much money!

"Muscle Car, 1958-96 Impala" Page 1 of 1

New (0)

On Sale (0)

Garage Sale (0)

  • 1964-1974 Big Block Chevy Long Tube Headers, AHC Coated
    1964-1974 Big Block Chevy Long Tube Headers, AHC Coated
    x
                

    These headers are just the ticket for you B/B Chevy guys. They feature 2" primary tubes, 3-1/2" collectors, and must be used with original big block motor mounts to fit properly. Built with surface machined thick steel flanges for a great seal and mandrel bent mild steel tubing.

    Available with metallic ceramic coating. Unlike paint or chrome, metallic ceramic coating is easy to keep clean, resists rust and corrosion and will not discolor. Metallic ceramic coating also reduces underhood temperatures.

    Headers come with installation hardware, collector reducers, gaskets and instructions.

  • 1967-1987 Small Block Chevy Shorty Headers, Manual Trans, Plain
    1967-1987 Small Block Chevy Shorty Headers, Manual Trans, Plain
    x
                

    These S/B Chevy headers are a shorty design that give maximum ground clearance and work with floor-shift manual transmissions only. Features 1-5/8" primary tubes and 3" collectors. Built with surface machined thick steel flanges for a great seal and mandrel bent mild steel tubing.

    Headers come with installation hardware, collector reducers, gaskets and instructions.  

    • 1968-87 Camaro, Chevelle, Malibu and El Camino
    • Must use non-shell style motor mounts
    • Manual Transmissions Only

    Header Dimensions Chart (JPEG)

  • 1967-1987 Small Block Chevy Shorty Headers, Manual Trans, AHC Coated
    1967-1987 Small Block Chevy Shorty Headers, Manual Trans, AHC Coated
    x
                

    These S/B Chevy headers are a shorty design that give maximum ground clearance and work with floor-shift manual transmissions only. Features 1-5/8" primary tubes and 3" collectors. Built with surface machined thick steel flanges for a great seal and mandrel bent mild steel tubing.

    Available with metallic ceramic coating. Unlike paint or chrome, metallic ceramic coating is easy to keep clean, resists rust and corrosion and will not discolor. Metallic ceramic coating also reduces underhood temperatures.

    Headers come with installation hardware, collector reducers, gaskets and instructions.  

    • 1968-87 Camaro, Chevelle, Malibu and El Camino
    • Must use non-shell style motor mounts
    • Manual Transmissions Only

    Header Dimensions Chart (JPEG)

  • Corvette-Style 2-1/2 Inch Ram Horn Exhaust Manifolds, Pair
    Corvette-Style 2-1/2 Inch Ram Horn Exhaust Manifolds, Pair
    x
                

    These "rams horn" cast iron manifolds were patterned off the 1962-63 327 Corvette but are not OEM remanufactured manifolds. They feature the big 2-1/2" diameter outlets and have provisions to accept original alternator type brackets.

    These headers are copies of the original headers on the 62-63 Corvettes and can be used on almost any small block application. The cast in brackets are for the water tank on the drivers side and generator bracket on the passenger side. These can be cut off and smoothed per customers preference. These are a square port configuration with 1-5/16” top to bottom and also side to side. Compare to your head port size for compatibility.

    • 1962-63 327 Corvette
    • 2-1/2" diameter outlets
    • 1-5/16" square ports
    • Use on almost any small block application up until the advent of the LS series engines in 1999
    • Use with 3 bolt header reducer/collector
    • Includes (1) left and (1) right side manifold
    • Gaskets and bolts/hardware are included
  • 1965-1989 Small Block Chevy Long Tube Headers, AHC Coated
    1965-1989 Small Block Chevy Long Tube Headers, AHC Coated
    x
                

    These long tube headers work with both automatic or manual transmissions in 1964-1989 Chevrolet chassis. Features 1-5/8" primary tubes, 3" collectors, and fits angled or straight plug S/B Chevy oval exhaust port heads. Built with surface machined thick steel flanges for a great seal and mandrel bent mild steel tubing. These headers are a chassis header and are meant to go inside of the frame rails on the 1965-1989 Chevrolet chassis.

    Available with metallic ceramic coating. Unlike paint or chrome, metallic ceramic coating is easy to keep clean, resists rust and corrosion and will not discolor. Metallic ceramic coating also reduces underhood temperatures.

    Headers come with installation hardware, collector reducers, gaskets and instructions. 

    Header Dimensions Chart (JPEG)

  • Corvette Style 2-1/2 Inch Ram Horn Exhaust Manifold
    Corvette Style 2-1/2 Inch Ram Horn Exhaust Manifold
    x
                

    These "rams horn" cast iron manifolds were patterned off the 1962-63 327 Corvette but are not OEM remanufactured manifolds. They feature the big 2-1/2" diameter outlets and have provisions to accept original alternator type brackets.

    These headers are copies of the original headers on the 62-63 Corvettes and can be used on almost any small block application. The cast in brackets are for the water tank on the drivers side and generator bracket on the passenger side. These can be cut off and smoothed per customers preference. These are a square port configuration with 1-5/8” top to bottom and also side to side. Compare to your head port size for compatibility.

    • 1962-63 327 Corvette
    • 2-1/2" diameter outlets
    • Use on almost any small block application up until the advent of the LS series engines in 1999
    • Use with 3 bolt header reducer/collector
    • Sold each, specify right or left.
    • Gaskets and bolts/hardware are not included
  • 1964-1974 Big Block Chevy Long Tube Headers, Plain
    1964-1974 Big Block Chevy Long Tube Headers, Plain
    x
                

    These headers are just the ticket for you B/B Chevy guys. They feature 2" primary tubes, 3-1/2" collectors, and must be used with original big block motor mounts to fit properly. Built with surface machined thick steel flanges for a great seal and mandrel bent mild steel tubing.

    Headers come with installation hardware, collector reducers, gaskets and instructions.

  • 1965-1989 Small Block Chevy Long Tube Headers, Plain
    1965-1989 Small Block Chevy Long Tube Headers, Plain
    x
                

    These long tube headers work with both automatic or manual transmissions in 1964-1989 Chevrolet chassis. Features 1-5/8" primary tubes, 3" collectors, and fits angled or straight plug S/B Chevy oval exhaust port heads. Built with surface machined thick steel flanges for a great seal and mandrel bent mild steel tubing. These headers are a chassis header and are meant to go inside of the frame rails on the 1965-1989 Chevrolet chassis.

    Headers come with installation hardware, collector reducers, gaskets and instructions. 

    Header Dimensions Chart (JPEG)