Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products

Speedway Motors is your one stop shop for muscle wiring and lighting. Make wiring your hot rod simple with easy-to-use wiring harnesses and step by step instructions. Finish off your muscle car with specialty headlights, LED dome lights, and LED tail lights. Find anything from various switches and relays to hidden radio antennas and let Speedway Motors eliminate any and all of your American muscle car electrical system problems!

"Muscle Car, 1955-57 Chevy" Page 1 of 1

New (0)

On Sale (0)

Garage Sale (0)

  • 1955 Chevy L.E.D. Back-Up Lights
    1955 Chevy L.E.D. Back-Up Lights
    x
                The 1955 Chevy cars were not known to have very bright or visible back-up lights. The cure is the addition of L.E.D. conversion kits. 

    These replace old 1157 style bulbs with 14 L.E.D. bulbs that are much brighter, don't put out much heat and last up to 100,000 hours. Stainless steel hardware and easy 30 minute installation.

    911-31032 Instructions (pdf)

  • 1957 Chevy Car Replacement Parking Light/Tail Light Lenses
    1957 Chevy Car Replacement Parking Light/Tail Light Lenses
    x
                

    Replace those old, damaged, or missing parking light and tail light lenses with these OEM reproduction lenses.  They come in the original clear, amber, or red color for your 1957 Chevy passenger car. 

    • OEM reproduction
    • 1957 Chevrolet Passenger Car
    • Plastic Parking Light or Tail light Lens
    • Choose among an amber or clear park lens or red rear lens

     

  • American Autowire 35785 1957 Chevy O/E Wiring Harness
    American Autowire 35785 1957 Chevy O/E Wiring Harness
    x
                

    This wiring harness adapts the OEM 1957 harness to the aftermarket Ididit column. The Ididit column uses the flat ribbon plug common to the later GM columns and should be adaptable to work with the later GM columns and other aftermarket columns using the GM ribbon style flat plug in. As always, wiring layout and sequence will need to be verified for each circuit.

    • Stock o/e harness to an Ididit steering column
    • Chevrolet Passenger 1957
    • For 1969-74 GM column to stock dash

    Note: Adapts horn, directionals, hazard flasher to stock dash

     

  • American Autowire 37788 1955 Chevy OEM Style Turn Signal Switch
    American Autowire 37788 1955 Chevy OEM Style Turn Signal Switch
    x
                

    If you're still running the stock column in your 1955 Chevy car, you'll probably need one of these OEM style turn signal switches.  They come complete with the male connector body.

    • 1955 Chevrolet passenger car
    • OEM style replacement
    • Complete with male connector body

     

  • 1957 Chevy LED Tail Light Conversion Kit
    1957 Chevy LED Tail Light Conversion Kit
    x
                The 1957 Chevy cars were not known to have very bright or visible tail lights. The cure is the addition of LED conversion kits. 

    These replace old 1157 style bulbs with 14 LED bulbs that are much brighter, don't put out much heat and last up to 100,000 hours. Stainless steel hardware and easy 30 minute installation.

    1957 Chevy LED Tail Light Conversion Instructions (pdf)

  • 1955 Chevy LED Tail Light Conversion Kit
    1955 Chevy LED Tail Light Conversion Kit
    x
                The 1955 Chevy cars were not known to have very bright or visible tail lights. The cure is the addition of LED tail light conversion kits. 

    These replace old 1157 style bulbs with 14 LED bulbs that are much brighter, don't put out much heat and last up to 100,000 hours. Stainless steel hardware and easy 30 minute installation.

    1955 Chevy LED Tail Light Conversion Instructions (pdf)

  • Technostalgia 6503 1957 Chevy LED Combo Lamp
    Technostalgia 6503 1957 Chevy LED Combo Lamp
    x
                                

    Improve safety and visibility in your 1957 Chevy with this bolt-in LED combination light. This single amber LED fists in the original signal lamp location on the grille bar and provides three lighting functions: a high-intensity daytime running light and turn signal, and a reduced intensity park light. 

    This LED works with all available 1957 Chevy park light lenses and has a custom-designed inner lens to properly focus the intense light.  

  • 1956 Chevy Car Replacement Parking Light Lens, Amber
    1956 Chevy Car Replacement Parking Light Lens, Amber
    x
                

    Replace those old, damaged, or missing lenses with these OEM reproduction park lenses.  They come in the original amber color for your 1956 Chevy passenger car. 

    • OEM reproduction
    • 1956 Chevrolet Passenger Car
    • Amber Plastic Parking Light Lens

     

  • 1955 Chevy Tail Light Lens, Passenger Car
    1955 Chevy Tail Light Lens, Passenger Car
    x
                

    These reproduction 1955 Chevy car incandescent tail light lenses are an OEM direct fit with the original "Guide" script.  Choose from a standard lens or classic Lynx-Eye blue dot.  Dot gives a bright lavender appearance when brake light comes on.

    • Original replacements
    • 1955 Chevy car
    • Red Plastic Lens with "Guide"
    • GM Restoration Licensed Product
    • Choose standard or blue dot
    • Sold each

     

  • 1956 Chevy LED Tail Light Conversion Kit
    1956 Chevy LED Tail Light Conversion Kit
    x
                The 1956 Chevy cars were not known to have very bright or visible tail lights. The cure is the addition of LED conversion kits. 

    These replace old 1157 style bulbs with 14 LED bulbs that are much brighter, don't put out much heat and last up to 100,000 hours. Stainless steel hardware and easy 30 minute installation.

    1956 Chevy LED Tail Light Conversion Instructions (pdf)

  • American Autowire 37797 1956 Chevy OEM Style Turn Signal Assembly
    American Autowire 37797 1956 Chevy OEM Style Turn Signal Assembly
    x
                

    If you're still running the stock column in your 1956 Chevy car, you'll probably need one of these OEM style turn signal switches.  They come complete with the male connector body.

    • 1956 Chevrolet passenger car
    • OEM style replacement
    • Complete with male connector body

     

  • American Autowire 35775 Chevy Steering Column Wiring Harness Adapter
    American Autowire 35775 Chevy Steering Column Wiring Harness Adapter
    x
                

    These wiring adapters for the stock o/e harness are designed to adapt to an Ididit steering column.  They work with 1955 Chevrolet passenger cars and 1969-74 GM steering columns to stock dash.

    • 1955 Chevrolet Passenger
    • For 1969-74 GM column to stock dash
    • Adapt to an Ididit steering column

    Note: Adapts horn, directionals, hazard flasher to stock dash

     

  • American Autowire 35780 1956 Chevy Steering Wiring Harness Adapter
    American Autowire 35780 1956 Chevy Steering Wiring Harness Adapter
    x
                

    This wiring adapter is designed for the stock o/e harness to adapt to an Ididit steering column.  These adapters work with 1956 Chevrolet passenger cars.

    • Stock o/e harness to an Ididit steering column
    • Chevrolet Passenger 1956
    • For 1969-74 GM column to stock dash

    Note: Adapts horn, directionals, hazard flasher to stock dash

     

  • American Autowire 37789 1957 Chevy OEM Style Turn Signal Switch
    American Autowire 37789 1957 Chevy OEM Style Turn Signal Switch
    x
                

    If you're still running the stock column in your 1957 Chevy car, you'll probably need one of these OEM style turn signal switches.  They come complete with the male connector body.

    • 1957 Chevrolet passenger car
    • OEM style replacement
    • Complete with male connector body