Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Mr. Roadster is the world's largest builder and and supplier of superior windshield frames. They offer beautiful chrome plated steel and polished aluminum reproduction windshield frames for many Model T, Model A, and other early Ford applications. Mr. Roadster windshield frames and posts are known internationally by authentic restoration enthusiasts and street rod builders alike.

Featured Products
Square Top T Windshield Frame, 39-5/8 Inches Wide
Square Top T Windshield Frame, 39-5/8 Inches Wide
(Part #55522022)
x
            

Mr. Roadsters square top 'T' windshield frames fit most fiberglass T-buckets. Triple chrome plated steel. Kit includes frame (approximately 20" tall), non-functional hinges and hardware. Designed for short style posts.

No glass or windshield rubber is included with our windshield frames.

Note: Speedway 1923-25 Model T Bodies use a 39-5/8" wide windshield frame when using short posts.

Builder's Tip: If using 1/4" glass or lexan, use urethane or setting tape (available from a glass shop) and do not use brass setting channel.

1915-25 Model T Short Style Windshield Posts, Chrome
1915-25 Model T Short Style Windshield Posts, Chrome
(Part #91656231)
x
            

Short style Model T posts are brass castings with mounting bosses on the back side to permit a smooth, clean installation. Fits 1915-25 Ford Model T roadster bodies.

916-56231 Instructions (PDF)

Stainless Deluxe 12 Volt Electric Wiper
Stainless Deluxe 12 Volt Electric Wiper
(Part #91123502)
x
            

This compact, self-contained wiper motor drives one wiper arm and blade, making it perfect for your early Coupe or Roadster. Has a 90° sweep.

Uses an external switch (not included). Use single control switch 910-64056 if using only 1 kit. Use dual control switch 910-64057 if using 2 kits.

For replacement parts, use blade 911-23506 and arm 911-23505.

  • Motor is 12 volt
  • Returns to park automatically when shut off
  • 90° sweep only
  • 11" wiper blade
  • Arm is adjustable from 7.5" to 11.75"

Deluxe Electric Wiper Motor Installation Instructions (PDF)

1932 Ford Roadster 2 Inch Chopped Windshield Frame, Chrome
1932 Ford Roadster 2 Inch Chopped Windshield Frame, Chrome
(Part #55532022)
x
            

Mr. Roadster 2" chopped 1932 Ford windshield frames are available in plain steel or chrome plated steel. Frame is NOT drilled on the inside for the rear view mirror or for the wiper assembly.

Measures 11-1/2" tall, 42" wide on bottom, and 43-3/4" wide on top.

NOTE: No glass or windshield rubber included with our windshield frames.

"Mr Roadster" Page 1 of 3

  • 1923-25 Model T Windshield Frame, Chrome
    1923-25 Model T Windshield Frame, Chrome
    (Part #55523002)
    x
                

    Mr. Roadster '23-'25 Model T steel windshield frames are reproductions using the stock dimensions: bottom 38-1/2 " wide, 10-1/8" tall, top 37" wide, 10-1/4" tall. Includes slugs and glass caps. Channel kit is sold separately. No glass or windshield rubber is included with our windshield frames.

    Builder's Tip: Speedway '23-'25 T bodies use a 39-5/8" wide windshield frame when using short posts. If using 3/16" glass or lexan, use with brass setting channel.  If using 1/4" glass or lexan, use urethane or setting tape (available from a glass shop) and do not use brass setting channel.

  • 1923-25 Model T Windshield Frame, Plain
    1923-25 Model T Windshield Frame, Plain
    (Part #55523001)
    x
                

    Mr. Roadster '23-'25 Model T steel windshield frames are reproductions using the stock dimensions: bottom 38-1/2 " wide, 10-1/8" tall, top 37" wide, 10-1/4" tall. Includes slugs and glass caps. Channel kit is sold separately. No glass or windshield rubber is included with our windshield frames.

    Builder's Tip: Speedway '23-'25 T bodies use a 39-5/8" wide windshield frame when using short posts. If using 3/16" glass or lexan, use with brass setting channel.  If using 1/4" glass or lexan, use urethane or setting tape (available from a glass shop) and do not use brass setting channel.

  • 1915-22 Model T Roadster Windshield Frame, Plain
    1915-22 Model T Roadster Windshield Frame, Plain
    (Part #55515001)
    x
                

    Mr. Roadster 1915-22 Model T steel round top windshields are exact reproductions using the stock dimensions: 39-1/8 " wide, 10" tall top and 12-1/8" tall bottom.  Channel kit sold separately. No glass or windshield rubber is included with these windshield frames.

    Builder's Tip: If using 3/16" glass or lexan, use with brass setting channel. If using 1/4" glass or lexan, use urethane or setting tape (available from a glass shop) and do not use brass setting channel.

  • 1928-1931 Model A Vicky Windshield Frame, Plain
    1928-1931 Model A Vicky Windshield Frame, Plain
    (Part #55528401)
    x
                

    Mr. Roadster Ford Model A windshields are made of extruded aluminum. Measures 14-5/8" tall, 45-3/8" wide at the top, and 44-1/2" wide at the bottom. These windshields have hinges at the top to allow them to open.

    Fits the following '28-'31 Ford models:

    • Victoria
    • Cabriolet
    • Town and Convertible Sedans
    • Standard and Deluxe 4-door Briggs Body Sedan slant windshield


    Note: No glass or windshield rubber included with our windshield frames.

  • 1932 Ford Stainless Upper Windsheild Posts
    1932 Ford Stainless Upper Windsheild Posts
    (Part #91133204)
    x
                

    These windshield upper posts are stock reproduction and feature side mount mirror holes. They are designed for 1932 Fords and come in a polished stainless steel finish.

    • Upper posts
    • Stock reproduction
    • Side mount mirror holes
    • 1932 Ford passenger cars
    • Polished stainless steel finish
    • Each post includes a tapped 3/8"-24 fine thread hole for mirror mounting
  • 1932 Ford Roadster and Phaeton Windshield Frame, Plain
    1932 Ford Roadster and Phaeton Windshield Frame, Plain
    (Part #55532001)
    x
                Mr. Roadster steel reproduction 1932 Ford open car (Roadster & Phaeton) windshield frames are available in plain steel or chrome plated steel. Includes windshield rubber.  
    • 10-3/4" height @ center
    • 13-1/2" height @ side
    • 41-3/4" width @ bottom
    • 43-3/4" width @ top

    Note: No glass included with our windshield frames.

  • 1928-29 Model A Roadster Windshield Frame, Chrome Steel
    1928-29 Model A Roadster Windshield Frame, Chrome Steel
    (Part #55528002)
    x
                

    Mr. Roadster '28-'29 Model A Roadster windshield frames feature one-piece constructon and have stock Ford dimensions.

    Note: No glass or windshield rubber included with our windshield frames.

  • 1926-27 Model T Roadster Windshield Frame, Bottom Only, Plain
    1926-27 Model T Roadster Windshield Frame, Bottom Only, Plain
    (Part #55526031)
    x
                

    These beautiful replacement '26-'27 Model T windshield frames are available as a complete frame kit or just the bottom section to fit a specific application. These are 7/8" O.D. and the glass channel is 5/16" wide and 1/4" deep. The lower part of the frame next to the body accepts our T seal number 555-92600 and the slot for the seal is 1/8" wide with provision to accept the "T" style seal. 

    No glass or windshield rubber included with our frames. The slugs that are included with this windshield frame must be positioned, drilled and tapped by the installer.

    • 35" wide at bottom of frame
    • 38-1/2" overall width
    • 9-3/4" tall

    NOTE: You will also need (4) studs, wing nuts, and swivels (all sold separately) along with this frame.

  • 1926-1927 Model T Closed Car Windshield Frame, Polished
    1926-1927 Model T Closed Car Windshield Frame, Polished
    (Part #55526303)
    x
                

    Mr. Roadster '26-'27 Model T closed car windshield frame is made of extruded aluminum. Comes with top hinge. Measures 17-1/4" tall, 42-3/4" wide at the bottom, and 43-5/8" wide at the top.

    Note: No glass or windshield rubber included with our windshield frames.

  • 1930-31 Model A Standard Roadster Windshield Frame, 2 Inch Chopped
    1930-31 Model A Standard Roadster Windshield Frame, 2 Inch Chopped
    (Part #55530021)
    x
                

    Mr. Roadster '30-'31 Model A Roadster windshield frames feature one-piece steel constructon and have a 2" chop for a more streamlined appearance. Plain finish steel for Standard bodies.

    Note: No glass or windshield rubber included with our windshield frames.

  • 1930-31 Model A Deluxe Roadster Windshield Frame, Plain
    1930-31 Model A Deluxe Roadster Windshield Frame, Plain
    (Part #55530101)
    x
                

    Mr. Roadster '30-'31 Model A Roadster windshield frames for Deluxe bodies feature one-piece steel constructon and have stock Ford dimensions.

    Note: No glass or windshield rubber included with our windshield frames.

  • 1930-31 Model A Deluxe Roadster Windshield Frame, Chrome
    1930-31 Model A Deluxe Roadster Windshield Frame, Chrome
    (Part #55530102)
    x
                

    Mr. Roadster '30-'31 Model A Roadster windshield frames for Deluxe bodies feature two-piece steel constructon and have stock Ford dimensions.

    Note: No glass or windshield rubber included with our windshield frames.

  • 1928-29 Model A Roadster Windshield Frame, 2 In Chopped, Chrome Steel
    1928-29 Model A Roadster Windshield Frame, 2 In Chopped, Chrome Steel
    (Part #55528022)
    x
                

    Mr. Roadster '28-'29 Model A Roadster Chopped windshield frames feature one-piece constructon and are chopped 2" for a more streamlined appearance.

    Note: No glass or windshield rubber included with our windshield frames.

  • One-Piece Round Top Model T Windshield Frame, 39 Inches Wide
    One-Piece Round Top Model T Windshield Frame, 39 Inches Wide
    (Part #55522312)
    x
                Mr. Roadster is the nation's largest builder and supplier of superior windshield frames. Fits most 'T' bucket bodies. No hinges or rubber divider required. Easy installation. All parts are triple chrome plated. 20" tall. Designed for short style posts (916-56231 or 916-56232). 
    • Glass and windshield rubber not included 
    • If using 3/16" glass or lexan, use with brass setting channel. 
    • If using 1/4" glass or lexan, use urethane or setting tape (available from a glass shop) and do not use brass setting channel.

    Note: Speedway's 1923-25 Model T bodies use a 39-5/8" wide windshield frame when using short posts.

  • 1926-27 Model T Roadster Windshield Frame, Plain
    1926-27 Model T Roadster Windshield Frame, Plain
    (Part #55526001)
    x
                

    These beautiful replacement '26-'27 Model T windshield frames are available as a complete frame kit or just the bottom section to fit a specific application. These are 7/8" O.D. and the glass channel is 5/16" wide and 1/4" deep. The lower part of the frame next to the body accepts our T seal number 555-92600 and the slot for the seal is 1/8" wide with provision to accept the "T" style seal. 

    No glass or windshield rubber included with our frames. The slugs that are included with this windshield frame must be positioned, drilled and tapped by the installer.

    NOTE: You will also need (4) studs, wing nuts, and swivels (all sold separately) along with this frame.

  • 1915-25 Model T Short Style Windshield Posts, Plain
    1915-25 Model T Short Style Windshield Posts, Plain
    (Part #91656232)
    x
                

    Short style Model T posts are brass castings with mounting bosses on the back side to permit a smooth, clean installation. Fits 1915-25 Ford Model T roadster bodies.

    916-56232 Instructions (PDF)

  • 1932 Ford 5-Window Coupe Windshield Frame
    1932 Ford 5-Window Coupe Windshield Frame
    (Part #55532401)
    x
                Mr. Roadster is the nation's largest builder and supplier of superior windshield frames. Speedways stock style replacement frame for 1932 Ford 5 window Coupe, Tudor, Ford or and Victoria (not 3 window). Includes upper hinge brackets and lower brackets for mounting the "slide" bars. Plain steel finish.  
    • 43" wide @ bottom
    • 44" wide @ top
    • 13-3/4" tall @ sides
    • 12-1/4" tall @ center 

    Note: No glass or windshield rubber included with our windshield frames.

  • Square Top T Windshield Frame, 40-1/2 Inches Wide
    Square Top T Windshield Frame, 40-1/2 Inches Wide
    (Part #55522032)
    x
                

    Mr. Roadsters square top 'T' windshield frames fit most fiberglass T-buckets. Triple chrome plated steel. Kit includes frame (approximately 20" tall), non-functional hinges and hardware. Designed for short style posts.

    No glass or windshield rubber is included with our windshield frames.

    Note: Speedway 1923-25 Model T Bodies use a 39-5/8" wide windshield frame when using short posts.

    Builder's Tip: If using 1/4" glass or lexan, use urethane or setting tape (available from a glass shop) and do not use brass setting channel.

  • 1928-29 Ford Model A Windshield Posts, Plain Aluminum
    1928-29 Ford Model A Windshield Posts, Plain Aluminum
    (Part #91656292)
    x
                These 1928-29 Ford Model A roadster windshield posts are a cast aluminum one-piece design. Length from end to windshield pivot stud hole is approximately 16-1/2". Length from end to end is approximately 18-3/4".
            
  • Two-Piece Round Top Model T Roadster Windshield Frame, 39 Inch Wide
    Two-Piece Round Top Model T Roadster Windshield Frame, 39 Inch Wide
    (Part #55522112)
    x
                

    Mr. Roadsters 2-piece round top windshield frames fit most fiberglass T-buckets. Triple chrome plated. Kit includes frame (approximately 20" tall) and hardware. Designed for short style windshield posts.

    No glass or windshield rubber is included with our windshield frames. Note: Speedway's 1923-25 T bodies use a 39-5/8" wide windshield frame when using short posts.

    Builder's Tip: If using 1/4" glass or lexan, use urethane or setting tape (available from a glass shop) and do not use brass setting channel.

  • 1932 Ford Roadster and Phaeton Windshield Frame, Chrome
    1932 Ford Roadster and Phaeton Windshield Frame, Chrome
    (Part #55532002)
    x
                Mr. Roadster steel reproduction 1932 Ford open car (Roadster & Phaeton) windshield frames are available in plain steel or chrome plated steel. Includes windshield rubber.  
    • 10-3/4" height @ center
    • 13-1/2" height @ side
    • 41-3/4" width @ bottom
    • 43-3/4" width @ top

    Note: No glass included with our windshield frames.

  • 1932 Ford Open Car Stainless Windshield Post Kit
    1932 Ford Open Car Stainless Windshield Post Kit
    (Part #91133202)
    x
                

    These two-piece, stock height 1932 Ford Roadster and Phaeton windshield posts come with a left side mount mirror hole. Four standard chrome wingnuts included.

    • Two-piece
    • Stock Height
    • Posts with side mount mirror holes
    • Stainless
    • Four standard chrome wingnuts included
    • Two lower stainless stanchions with gaskets included
  • 1926-27 Model T Roadster Windshield Frame, Chrome
    1926-27 Model T Roadster Windshield Frame, Chrome
    (Part #55526002)
    x
                

    These beautiful replacement '26-'27 Model T windshield frames are available as a complete frame kit or just the bottom section to fit a specific application. These are 7/8" O.D. and the glass channel is 5/16" wide and 1/4" deep. The lower part of the frame next to the body accepts our T seal number 555-92600 and the slot for the seal is 1/8" wide with provision to accept the "T" style seal. 

    No glass or windshield rubber included with our frames. The slugs that are included with this windshield frame must be positioned, drilled and tapped by the installer.

    NOTE: You will also need (4) studs, wing nuts, and swivels (all sold separately) along with this frame.

  • 1928-29 Model A Aluminum Windshield Posts, 2 Inch Chopped
    1928-29 Model A Aluminum Windshield Posts, 2 Inch Chopped
    (Part #91656281)
    x
                These street rod/roadster 1928-29 Ford Model A windshield posts are a cast aluminum  one-piece design. Length from end to windshield pivot stud hole is  approximately 14-1/2". Length from end to end is approximately 16-3/4".                                
    • Cast aluminum.
    • Available in plain only
    • 2 Inch chopped
    • Drilling and fitment fabrication required
    • You polish and save!
  • 1935-36 Ford Closed Car Windshield Frame
    1935-36 Ford Closed Car Windshield Frame
    (Part #55535301)
    x
                

    Mr. Roadster is the nation's largest builder and supplier of superior windshield frames. Steel reproduction windshield for '35-'36 Ford closed cars (not pick-up trucks). Frame has two sets of 3 holes on the top for the hinges and one pair of holes on the bottom for the tip-out latch mechanism. Available in plain steel finish.

    • 44-1/2" wide
    • 14-1/4" tall

    Note: No glass or windshield rubber included with our windshield frames.

  • Square Top T Windshield Frame, 39-5/8 Inches Wide
    Square Top T Windshield Frame, 39-5/8 Inches Wide
    (Part #55522022)
    x
                

    Mr. Roadsters square top 'T' windshield frames fit most fiberglass T-buckets. Triple chrome plated steel. Kit includes frame (approximately 20" tall), non-functional hinges and hardware. Designed for short style posts.

    No glass or windshield rubber is included with our windshield frames.

    Note: Speedway 1923-25 Model T Bodies use a 39-5/8" wide windshield frame when using short posts.

    Builder's Tip: If using 1/4" glass or lexan, use urethane or setting tape (available from a glass shop) and do not use brass setting channel.

  • 1930-31 Model A Deluxe Roadster Windshield Frame, 2 In Chopped, Chrome
    1930-31 Model A Deluxe Roadster Windshield Frame, 2 In Chopped, Chrome
    (Part #55530122)
    x
                

    Mr. Roadster '30-'31 Model A Roadster windshield frames feature one-piece steel constructon and have a 2" chop for a more streamlined appearance. Chrome finish steel for Deluxe bodies.

    Note: No glass or windshield rubber included with our windshield frames.

  • 1909-1912 Model T Roadster Brass Windshield Frame, Torpedo
    1909-1912 Model T Roadster Brass Windshield Frame, Torpedo
    (Part #55509200)
    x
                

    Mr. Roadster '09-'12 Model T windshield frames are constructed from solid brass, then fully polished. Features a brass channel. No glass or windshield rubber is included with these windshield frames. 

    Builder's Tip: If using 3/16" glass or lexan, use with a brass setting channel. If using 1/4" glass or lexan, use urethane or setting tape (available from a glass shop) and do not use a brass setting channel.

  • 1928-29 Model A Roadster Windshield Frame, Plain Steel
    1928-29 Model A Roadster Windshield Frame, Plain Steel
    (Part #55528001)
    x
                

    Mr. Roadster '28-'29 Model A Roadster windshield frames feature one-piece constructon and have stock Ford dimensions.

    Note: No glass or windshield rubber included with our windshield frames.

  • 1909-1912 Model T Roadster Brass Windshield Frame, Speedster
    1909-1912 Model T Roadster Brass Windshield Frame, Speedster
    (Part #55509100)
    x
                

    Mr. Roadster '09-'12 Model T windshield frames are constructed from solid brass, then fully polished. Features a brass channel. No glass or windshield rubber is included with these windshield frames. 

    Builder's Tip: If using 3/16" glass or lexan, use with a brass setting channel. If using 1/4" glass or lexan, use urethane or setting tape (available from a glass shop) and do not use a brass setting channel.

  • 1928-29 Model A Roadster Windshield Frame, 2 Inch Chopped, Plain Steel
    1928-29 Model A Roadster Windshield Frame, 2 Inch Chopped, Plain Steel
    (Part #55528021)
    x
                

    Mr. Roadster '28-'29 Model A Roadster Chopped windshield frames feature one-piece constructon and are chopped 2" for a more streamlined appearance.

    Note: No glass or windshield rubber included with our windshield frames.

  • 1932-34 Ford Pickup Windshield Frame, Polished
    1932-34 Ford Pickup Windshield Frame, Polished
    (Part #55532503)
    x
                

    Mr. Roadster is the nation's largest builder and supplier of superior windshield frames. Made of extruded aluminum. Stock style replacement for '32-'34 Ford 1/2 ton pick-up, closed cab trucks. Includes top hinge only.

    • 16" tall
    • 44-1/2" wide @ bottom
    • 45-3/4" wide @ top

    Note: No glass or windshield rubber included with our windshield frames.

  • 1928-1931 Model A Closed Car Windshield Frame, Plain
    1928-1931 Model A Closed Car Windshield Frame, Plain
    (Part #55528301)
    x
                

    Mr. Roadster 1928-31 Ford Model A windshields are made of extruded aluminum. Measures 16" tall, 44-1/2" wide at the bottom, and 45-3/8" wide at the top. These windshields have hinges at the top to allow them to open.

    • '28-'29
      • 5-window
      • Special Sport & Business Coupes
      • Tudor Sedan
      • Sedan Delivery
      • Taxi
      • Station Wagon
      • 2-door Sedan w/ vacuum wiper
      • Closed Cab 1/2 ton Pickup
    • '30-'31
      • Station Wagon
      • Murray Town Sedan
      • Briggs Standard & Deluxe Sedan slant windshield
      • Murray 4-door vertical windshield
      • 5-window & Sport Coupes
      • Tudor Sedan
      • Closed Cab Pickup
      • Sedan Delivery
    Note: No glass or windshield rubber included with these windshield frames.
  • 1935-36 Ford Cabriolet Windshield Frame
    1935-36 Ford Cabriolet Windshield Frame
    (Part #55535201)
    x
                Mr. Roadster is the nation's largest builder and supplier of superior windshield frames. Steel reproduction windshield frame for '35-'36 Ford Cabriolet. Plain steel finish.  

    Note: This is a frame only - no hinges, hardware, glass, or windshield rubber is included with this windshield frame.

  • 1932 Ford 3-Window Windshield Frame
    1932 Ford 3-Window Windshield Frame
    (Part #55532301)
    x
                

    Mr. Roadster is the nation's largest builder and supplier of superior windshield frames. Mr. Roadsters '32 Ford 3-window coupe closed car windshield frames are guaranteed to fit like factory replacements. This frame has top hinge brackets only. Plain steel finish.

    • 43" wide @ bottom
    • 43-1/2" wide @ top
    • 13" tall @ sides
    • 11-3/4" tall @ center

    Note: No glass or windshield rubber included with our windshield frames.

  • 1932-34 Ford Pickup Windshield Frame, Plain
    1932-34 Ford Pickup Windshield Frame, Plain
    (Part #55532501)
    x
                

    Mr. Roadster is the nation's largest builder and supplier of superior windshield frames. Made of extruded aluminum. Stock style replacement for '32-'34 Ford 1/2 ton pick-up, closed cab trucks. Includes top hinge only.

    • 16" tall
    • 44-1/2" wide @ bottom
    • 45-3/4" wide @ top

    Note: No glass or windshield rubber included with our windshield frames.

  • 1926-1927 Model T 4 Inch Chopped Roadster Windshield Frame, Plain
    1926-1927 Model T 4 Inch Chopped Roadster Windshield Frame, Plain
    (Part #55526041)
    x
                

    Mr. Roadster '26-'27 Model T windshield is a one-piece design like a Model A roadster. "Chopped" to a height of 16" tall.

    These are 7/8" O.D. and the glass channel is 5/16" wide and 1/4" deep. The lower part of the frame next to the body accepts our T seal number 555-92600 and the slot for the seal is 1/8" wide with provision to accept the "T" style seal and are 16" tall.

    Note: No glass or windshield rubber included with our windshield frames.

  • 1926-1927 Model T Closed Car Windshield Frame, Plain
    1926-1927 Model T Closed Car Windshield Frame, Plain
    (Part #55526301)
    x
                

    Mr. Roadster '26-'27 Model T closed car windshield frame is made of extruded aluminum. Comes with top hinge. Measures 17-1/4" tall, 42-3/4" wide at the bottom, and 43-5/8" wide at the top.

    Note: No glass or windshield rubber included with our windshield frames.

  • 1933-34 Ford Roadster and Phaeton Windshield Frame, Chrome
    1933-34 Ford Roadster and Phaeton Windshield Frame, Chrome
    (Part #55533002)
    x
                

    Mr. Roadster is the nation's largest builder and supplier of superior windshield frames. These steel reproduction '33-'34 Ford Roadster & Phaeton windshield frames are guaranteed to fit like factory replacements.

    Note: No glass or windshield rubber included with our windshield frames.

  • 1932 Ford Roadster 2 Inch Chopped Windshield Frame, Plain
    1932 Ford Roadster 2 Inch Chopped Windshield Frame, Plain
    (Part #55532021)
    x
                

    Mr. Roadster 2" chopped 1932 Ford windshield frames are available in plain steel or chrome plated steel. Frame is NOT drilled on the inside for the rear view mirror or for the wiper assembly.

    Measures 11-1/2" tall, 42" wide on bottom, and 43-3/4" wide on top.

    NOTE: No glass or windshield rubber included with our windshield frames.

Goto Previous PagePrevious Page
1 2 3