Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Filter

Page 1 of 36

Products

Shop MSD At Speedway Motors

MSD Ignition is your source for the best ignition system components on the market today. Whether you need basic replacements to keep your daily driver on the road or the most powerful ignition to fire a top fuel dragster, Speedway Motors has what it takes to keep you fired up. MSD Ignition strives to serve the performance industry with the best products out there such as MSD Distributors, MSD Wires and other MSD products.

Featured Products
  • MSD 89631 Programmable Shift Light
    $167.99
    $197.99
    MSD 89631 Programmable Shift Light
    (Part #54789631)
    x
                The most universal and easy to use shift light available! Our new compact Digital Shift Light can be installed on every­thing from 1-cylinder points-triggered engines to Modular Ford engines with coil-on-plug technology.The tiny digital controller inside the compact housing gives you the ability to program the rpm activation points through the easy-to-view LED panel and two programming buttons. When the engine reaches the activation rpm, the six red LEDs illuminate brightly to alert your senses into throwing the shifter at the exact rpm. The DSL can be installed on single cylinder engines up through 12-cylinders on stock ignitions or high-powered aftermarket systems.

    Installation Instructions (PDF)

    • Installs with distributors, coil packs or coil-on-plug systems ranging from single to 12-cylinders
    • Programmable from 100 - 15,900 rpm down to 10 rpm increments
    • Six bright LEDs are easy to view in daylight and can be dimmed at night
    • Supplied with an easy to install GMR pickup!
  • MSD 5095 DynaForce Chevy Starter
    $275.99
    $289.99
    Product Rating: 5.00 Stars
    MSD 5095 DynaForce Chevy Starter
    (Part #5475095)
    x
                

    The new DynaForce Starter is designed to crank over the highest compression engines on a hot day in Death Valley. Not that too many race cars are sitting in Death Valley, but it’s good to know that you have the oomph to make it happen. The DynaForce Starter features all new components beginning with a three horsepower motor. This power is used to crank over the reduced 4.4:1 gear set to deliver great torque to the engine’s ring gear to get the engine turning. The armature is balanced during assembly and is guided by two ball bearings for smooth engagement and thousands of starts. The downsized housing clears most headers and oil pans, but just in case, we made the billet mount so it can be clocked in different positions to help in tight applications. The assembly is powder coated MSD red and will stay looking good, even though it’s underneath your car.

    • Fits Chevy V8, 153 and 168 tooth flywheels
    • Mount is for straight bolt pattern
    • Gear reduction of 4.4:1 improves torque for great cranking
    • Three horsepower motor provides power for high compression engines
    • Ball bearing supported armature and pinion gear
    • Downsized design helps clearance issues with oil pans and exhaust
    • Mount can be clocked to assist in mounting

     

    547-5095 Instructions (PDF)

    MSD Rebate (Link)

  • MSD 8985 Timing Tapes
    $4.99
    $5.99
    Product Rating: 4.60 Stars
    MSD 8985 Timing Tapes
    (Part #5478985)
    x
                

    MSD's timing tape set comes with eight different tapes to fit balancers from 5-1/4" to 8" diameters.

    MSD Rebate (Link)

  • MSD 2225 In-Line Hi-Pressure Fuel Pump
    $115.99
    $119.99
    Product Rating: 4.00 Stars
    MSD 2225 In-Line Hi-Pressure Fuel Pump
    (Part #5472225)
    x
                

    Most modern engines have a hi-pressure fuel pump located in the gas tank. If you are transplanting one of these engines into your hot rod, what are you going to do for a fuel pump? This MSD pump can be mounted on the frame and can put out up to 43 gph at 40 psi or 39 gph at 80 psi.

    • Flows 43 gph (282 lb/hr) gasoline @ 40 psi and 12 volts/5.4 amps 
    • Supports most multiport EFI systems up to 500 horsepower
    • Mounts in-line (out of the fuel tank)
    • Roller vane pump mechanism is extremely resistant to clogging and jamming
    • Has 3/8” hose barb inlet and 5/16" hose barb outlet
    • Made in the USA

    MSD Rebate (Link)

  • MSD 2362 Pro-Billet Cam Sync Distributor, Ford 351With Steel gear
    MSD 2362 Pro-Billet Cam Sync Distributor, Ford 351With Steel gear
    (Part #5472362)
    x
                This new Pro-Billet Distributor features an adjustable cam sync pickup as well as a magnetic pickup inside the distributor to trigger the ignition control. The Hall-effect sync pickup is adjustable up to 60° BTDC to meet the needs of most aftermarket ECUs and even is crimped with a common 2-pin Weathertight connector. A great new feature is the two piece adjustable rotor that is supplied. This assists in setting up the proper rotor phasing for accurate timing and spark. This distributor must be used with an MSD 6, 7, 8 or 10-Series Ignition.

    Installation Instructions (PDF)

    • MSD 8213 Coil Bracket
      $7.99
      MSD 8213 Coil Bracket
      (Part #5478213)
      x
                  

      The MSD Coil Bracket offers easy, univer­sal mounting for standard size ignition coils up to 2-1/4" in diameter. The Bracket uses a bolt and nut combination instead of the easily stripped self-tapping screw common on other brand brackets.  Perfect for cannister type coils

      Adustable from 1-3/4" to 2-3/8" with slight bending of mounting tabs.

      MSD Rebate (Link)

    • MSD 35051 Pro Crimp Tool
      $80.99
      MSD 35051 Pro Crimp Tool
      (Part #54735051)
      x
                  

      If you make numbers of plug wires or do a lot of custom wiring, the Pro-Crimp Tool is a must for your toolbox. The Pro-Crimp features interchangeable jaws allowing for a variety of different style crimps with one heavy-duty tool. The Pro-Crimp features a hardened steel frame with comfortable molded hand grips. The slick ratchet action provides secure, factory quality crimps every time. The Tool is supplied with precision crimping/stripping jaws for MSD’s spark plug wire terminals. Recommended to be used with MSD 8.5mm Super Conductors!

      Pro Crimp Tool can also be used to crimp Weatherpak terminals with the Weatherpak Jaw Attachment 547-3509. 

      Learn how to properly use this tool to attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.

      MSD Rebate (Link)

    • MSD 2760 Atomic Transmission Controller, Stand Alone
      MSD 2760 Atomic Transmission Controller, Stand Alone
      (Part #5472760)
      x
                  

      The all-new MSD Transmission Controller was developed completely in-house “ evolving from the engineering expertise and proven performance of our Atomic EFI technology. In fact, the Atomic TCM is designed to integrate directly with the Atomic EFI when using Brainwave so you can modify transmission operation parameters from the same handheld monitor! Doing away with the need for sensor duplication, and an extra programmer, means less wiring for easy installation and a clean appearance. Dont worry if you havent stepped up to an Atomic EFI system yet; the Trans Controller is also offered as a stand-alone system to work with most OEM or aftermarket fuel injection systems, as well as carbureted applications equipped with a stand-alone Throttle Position Sensor (TPS). This allows you to take advantage of modern 4-speed overdrive transmissions and the inherent flexibility associated with electronic controls. Available as a stand alone controller or Brainwave ready Adjust the operating parameters of later model electronically controlled 4-speed overdrive transmissions Simple to configure with the supplied Handheld Monitor “ no PC required* OEM style connectors allow direct plugin to popular GM and Ford transmissions Adjust shift points, shift firmness, torque converter clutch behavior, and more Monitor the operation of your transmission in real-time The Brainwave ready TCM allows for seamless integration with the Atomic EFI controller to reduce wiring and simplify setup Easily modify the operating parameters of your GM or Ford 4-speed automatic transmission: Adjust shift points Adjust torque converter clutch behavior Select different levels of shift firmness Select between auto-shift mode and manual-shift mode Activate Dyno Mode to deliver repeatable chassis dyno results Parameter Adjustment Parameters The Atomic TCM allows simple parameter adjustment using the supplied Handheld Monitor. Thats right - no need to worry about a PC and complicated software. The Handheld connects to the Atomic TCM and can be left in place as a dash board to monitor the transmission in real-time, or disconnected once the configuration is complete*. Once installed and connected, you need only specify a few basic parameters that are listed in the Initial Setup menu. First and foremost, select the type of transmission you are using (such as a GM 4L60E or Ford 4R70W). All supported transmission types are listed in the menu to make this step easier. Other required fields under Initial Setup include the number of engine cylinders, rear end gear ratio (and transfer case ratio, if applicable), and tire height. Once the Initial Setup has been completed, you can start and drive the vehicle while taking advantage of the Advanced Setup menu items to dial-in the transmission to your liking. From the Advanced Setup menu, you can control shift points and characteristics like shift feel and torque converter clutch operation. There are also options allowing adjustment of the desired Wide Open Throttle (WOT) shifting, Vehicle Speed Sensor configuration, and more. You can feel the results in real-time as a passenger manipulates the parameters and monitors real-time operational data on the Handheld Monitor! Data available for viewing include engine speed, vehicle speed, throttle position, transmission fluid temperature, shifter position, commanded gear, and more! *Handheld not supplied with Brainwave ready TMC.

      MSD Rebate -  October 1, 2014 - October 31, 2014

      Installation Instructions (PDF)

      • Adjust shift points
      • Adjust torque converter clutch behavior
      • Select different levels of shift firmness
      • Select between auto-shift mode and manual-shift mode
      • Activate Dyno Mode to deliver repeatable chassis dyno results
      • Stand-Alone system.
      • Get more information on the Atomic Transmission Controller here.

    Filter

    "MSD" Page 1 of 36

    Page 1 of 36

    • MSD 29711 Atomic LS Coil Covers - LS1, LS6, Black
      New
      MSD 29711 Atomic LS Coil Covers - LS1, LS6, Black
      (Part #54729711)
      x
                  

       If you desire a clean and customized look to your engine compartment, our new Atomic LS coil covers are designed to fit over the valve covers and coil assemblies to effectively hide the coil packs and wiring. The cast aluminum covers align with the Atomic Smart Fuel Rail assemblies and provide a completely smooth contoured finish to the edge of the valve cover. The Atomic Coil Covers will work with OEM coils as well as MSD's Multiple Sparking Coils.

      • Fits over valve covers and coil assemblies
      • Smooth Contoured Finish
      • Works with OEM coils and MSD's Multiple Sparking Coils
      • Sold Individually
      • LS1, LS6

      Installation Instructions (PDF) 

    • MSD 31889 Red Super Conductor Ford 4.6L, 5.4L, Universal
      MSD 31889 Red Super Conductor Ford 4.6L, 5.4L, Universal
      (Part #54731889)
      x
                  The MSD 8.5mm Super Conductor Wire is "the" performance wire.Engineered from the inside out, the 8.5 offers everything you have everwanted in a wire; incredibly low resistance without electronic interference! In a single 12 inch length of Super Conductor Wire there is only 40 - 50 ohms of resistance! That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it's great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference (EMI) "choke". This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. The MSD 8.5mm Super Conductor Plug Wire is available in Universal Kits and Bulk Lengths.

      Installation Instructions (PDF)

      • 40-50 Ohms per foot of resistance!
    • MSD 8732 2-Step Rev Control for Digital 6AL
      MSD 8732 2-Step Rev Control for Digital 6AL
      (Part #5478732)
      x
                  Since the new Digital 6AL Ignition uses rotary dials to adjust the rev limiter, our engineers were tasked with developing a 2-Step Rev Control that could be added to give racers the ability to switch to a low rpm limit to use on the starting line.    The new 2-Step is also digitally controlled and connects to the Digital 6ALs gray tach output wire. There are two easy to read rotary dials that let you set the launch rpm in 100 rpm increments. There is an activation wire that connects to the transbrake, a clutch switch or to the line-lock to activate the low rpm limit. When that switch is released, the low rpm limit is turned off and the car launches hard!

      Installation Instructions (PDF)

      • For use with Digital 6AL PN 6425 only
    • MSD 32939 Super Conductor Plug Wires, 98-01 Ford ZX-2, 2.0L, 4 cyl
      MSD 32939 Super Conductor Plug Wires, 98-01 Ford ZX-2, 2.0L, 4 cyl
      (Part #54732939)
      x
                  Please view the product's page for more information
              
    • MSD 8248 Blaster Coil 5.0L Coyote
      MSD 8248 Blaster Coil 5.0L Coyote
      (Part #5478248)
      x
                  The all new Ford 5.0L Coyote engine is hot, but MSD now offers a coil that will make it even hotter! MSD developed a replacement coil that incorporates improved windings and material to increase the output of the coil. Also, when other modifications are being added, you can rely on the Blaster Coil to recover quicker through high rpm with a powerful spark to promote combustion.
      • Improved high rpm operation
      • Patented winding design and materials
      • Direct bolt-in to factory connectors
      • 3.33402777777778
      • .51 ohms
      • Intnal Diode
      • 1.9 mH
      • 100 mA
      • 120 us
      • 48 mj
      • 32KV
    • MSD 32709 Super Conductor Plug Wires, Diamante, GT3000 Turbo V6 92-96
      MSD 32709 Super Conductor Plug Wires, Diamante, GT3000 Turbo V6 92-96
      (Part #54732709)
      x
                  Please view the product's page for more information
              
    • MSD 5561 Street-Fire Wire Set Chevy 366-454 Socket
      MSD 5561 Street-Fire Wire Set Chevy 366-454 Socket
      (Part #5475561)
      x
                  The Street Fire Spark Plug Wires feature a low resistance conductor thats wrapped in a sleek and durable black sleeve. The terminals are covered in black boots that protect the conductor from engine heat to ensure spark delivery.
      • Helically wound conductor suppresses electro and radio noise
      • Kevlar core combination for great strength and durability
      • Heavy duty terminals for secure connection
      • 8mm silicone and synthetic jacket resists heat and abrasion
      • 500 Ohms per foot resistance for improved spark delivery and power
      • Silicone boots protect against high exhaust temps
    • MSD 8111 Pro-Mag Kill Switch
      $59.99
      MSD 8111 Pro-Mag Kill Switch
      (Part #5478111)
      x
                  

      This heavy duty MSD Pro Mag kill switch comes complete with the harness that plugs directly into the Pro-Mag box.

      MSD Rebate (Link)

    • MSD 8581 Ford 351C-460 Bronze Distributor Gear
      MSD 8581 Ford 351C-460 Bronze Distributor Gear
      (Part #5478581)
      x
                  MSD Bronze Distributor gears are machined from quality AMPCO 45 aluminum bronze containing 5% nickel. This special com­bination creates high-strength gear teeth that are less prone to wear even with high-volume oil pumps.

      Installation Instructions (PDF)

      • Increased outer hardened layer thickness (RC 55-60).
      • Micro polished surface for smooth contact.
      • Proprietary formulated ductile iron.
      • Melonite QPQ coated reduces friction and initial wear.
      • Interstitial carbide concentration improves wear resistance and
    • MSD 31223 Black Super Conductor 8 Cyl, 90 Deg Plug, 90 Deg Plug
      MSD 31223 Black Super Conductor 8 Cyl, 90 Deg Plug, 90 Deg Plug
      (Part #54731223)
      x
                  The MSD 8.5mm Super Conductor Wire is "the" performance wire.Engineered from the inside out, the 8.5 offers everything you have everwanted in a wire; incredibly low resistance without electronic interference! In a single 12 inch length of Super Conductor Wire there is only 40 - 50 ohms of resistance! That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it's great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference (EMI) "choke". This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. The MSD 8.5mm Super Conductor Plug Wire is available in Universal Kits and Bulk Lengths.

      Installation Instructions (PDF)

      • MSD 8183 2-Pin Deutsch Connector, 16 gauge
        MSD 8183 2-Pin Deutsch Connector, 16 gauge
        (Part #5478183)
        x
                    There is absolutely no excuse for losing a race due to a poor wiring connection. MSDs Deutsch Connectors are sealed and lock together making them perfect for harsh racing applications. The compact housing of the connectors are molded from a durable plastic material that will not harden or crack. Each housing is indexed to prevent any chance of mismatching the ends plus they have a molded channel to secure another connector for a tidy appearance.The terminals grip to the wire with strong crimp tabs then lock into position inside the housing. The connections are protected with thick seals that will keep water, mud and debris away from the contacts. These terminals can handle more current than conventional connectors and do not require special tools. Supplied with terminals, seals and housings.

        Installation Instructions (PDF)

      • MSD 32279 Super Conductor Plug Wires Dodge, Chrys, Ply.,Mit. 2.0L DOHC
        MSD 32279 Super Conductor Plug Wires Dodge, Chrys, Ply.,Mit. 2.0L DOHC
        (Part #54732279)
        x
                    The MSD 8.5mm Super Conductor Wire is "the" performance wire.Engineered from the inside out, the 8.5 offers everything you have everwanted in a wire; incredibly low resistance without electronic interference! In a single 12 inch length of Super Conductor Wire there is only 40 - 50 ohms of resistance! That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it's great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference (EMI) "choke". This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. The MSD 8.5mm Super Conductor Plug Wire is available in Universal Kits and Bulk Lengths.
        • MSD 34615 90deg. Spark Plug Terminals, 100 each
          MSD 34615 90deg. Spark Plug Terminals, 100 each
          (Part #54734615)
          x
                      These spark plug terminals are what you need when you custom make your own sets. Available in 100 quanties.
                  
        • MSD 8674 RPM Module Rev Limiter Selector Switch, 9000-11,200 RPM
          MSD 8674 RPM Module Rev Limiter Selector Switch, 9000-11,200 RPM
          (Part #5478674)
          x
                      The RPM Module Selector plugs directly into the rpm module socket on all MSD Soft Touch Rev Controls and accessories that use plug-in mod­ules. The user can then select between twelve different rpm limits by simply turning the knob. Six models are available to cover a range from 3,000 rpm to 12,800 rpm in 200 rpm increments.

          Installation Instructions (PDF)

        • MSD 84049 Coil Wire for Blaster Coil, Socket Cap
          MSD 84049 Coil Wire for Blaster Coil, Socket Cap
          (Part #54784049)
          x
                      Coil wire for use with Blaster Coil and Socket style cap.
                  
        • MSD 5571 Street-Fire Wire Set Chev Pickup, BB EFI, 90-97
          MSD 5571 Street-Fire Wire Set Chev Pickup, BB EFI, 90-97
          (Part #5475571)
          x
                      The Street Fire Spark Plug Wires feature a low resistance conductor thats wrapped in a sleek and durable black sleeve. The terminals are covered in black boots that protect the conductor from engine heat to ensure spark delivery.
          • Helically wound conductor suppresses electro and radio noise
          • Kevlar core combination for great strength and durability
          • Heavy duty terminals for secure connection
          • 8mm silicone and synthetic jacket resists heat and abrasion
          • 500 Ohms per foot resistance for improved spark delivery and power
          • Silicone boots protect against high exhaust temps
        • MSD 2970  Atomic LS Coil Covers LS2, LS3, LS7, Red
          New
          MSD 2970 Atomic LS Coil Covers LS2, LS3, LS7, Red
          (Part #5472970)
          x
                      

           If you desire a clean and customized look to your engine compartment, our new Atomic LS coil covers are designed to fit over the valve covers and coil assemblies to effectively hide the coil packs and wiring. The cast aluminum covers align with the Atomic Smart Fuel Rail assemblies and provide a completely smooth contoured finish to the edge of the valve cover. The Atomic Coil Covers will work with OEM coils as well as MSD's Multiple Sparking Coils.

          • Fits over valve covers and coil assemblies
          • Smooth Contoured Finish
          • Works with OEM coils and MSD's Multiple Sparking Coils
          • Sold Individually
          • LS2, LS3, LS7

          Installation Instructions (PDF) 

        • MSD 8545 Chrysler 383,400 Pro-Billet Distributor
          MSD 8545 Chrysler 383,400 Pro-Billet Distributor
          (Part #5478545)
          x
                      Since many Chrysler enthusiasts use the B1 head or aftermarket valve cov­ers, these Pro-Billet Chrysler Distributors have been designed with a small diameter housing. This allows the distributors to fit tight block and head combinations.

          Installation Instructions (PDF)

          • Smaller diameter CNC machined billet aluminum housing and billet aluminum base clears aftermarket heads and valve covers
          • Easy-to-adjust mechanical advance with supplied springs and stop bushings
          • Maintenance-free magnetic pickup and precision reluctor create stable trigger signals throughout the rpm range
          • Polished steel shaft is QPQ coated and guided by two sealed ball bearings
          • Advance plate and weights are fine blanked from chrome moly steel and QPQ coated for friction reduction
          • Mechanical advance assembly can be locked out for crank trigger systems
          • Advance weight pins are staked and tig welded to the plate
          • Nylon pads ensure smooth operation of the advance weights
          • Supplied with small diameter cap with HEI style terminals and race rotor (will accept 8441 Cap-A-Dapt)
          • Must be used with an MSD Ignition Control
          • No CARB Exemption Order Number
        • MSD 82488 Blaster Coil 5.0L Coyote Set of 8
          MSD 82488 Blaster Coil 5.0L Coyote Set of 8
          (Part #54782488)
          x
                      

          The all new Ford 5.0L Coyote engine is hot, but MSD now offers a coil that will make it even hotter! MSD developed a replacement coil that incorporates improved windings and material to increase the output of the coil. Also, when other modifications are being added, you can rely on the Blaster Coil to recover quicker through high rpm with a powerful spark to promote combustion.

          MSD Rebate -  October 1, 2014 - October 31, 2014

          • Improved high rpm operation
          • Patented winding design and materials
          • Direct bolt-in to factory connectors
          • 3.33402777777778
          • .51 ohms
          • Intnal Diode
          • 1.9 mH
          • 100 mA
          • 120 us
          • 48 mj
          • 32KV
        • MSD 34033 Super Conductor Bulk Wire, Black 6Ft
          MSD 34033 Super Conductor Bulk Wire, Black 6Ft
          (Part #54734033)
          x
                      Please view the product's page for more information
                  
        Goto Previous PagePrevious Page
        1 2 3 4 5 ... 36