Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products

Banner

For over two decades Lokar has manufactured products of the highest quality, exceeding industry standards, raising the bar for quality products and leading the way for a better automotive aftermarket. Lokar is dedicated to providing all customers with with the best in transmission shifters, kickdown kits, throttle linkage, and emergency brakes.  This dedication has translated into an unwavering reputation that is known throughout the industry, which customers recognize. When one builds a company on Honesty, Integrity and Class, everything else falls into place. Lokar is that company.

"Lokar" Page 1 of 9

  • Lokar EHB-7000F Floor Mount Emergency Hand Brake, Chrome Finish
    Lokar EHB-7000F Floor Mount Emergency Hand Brake, Chrome Finish
    x
                

    This Lokar Floor Mount Emergency Hand Brake features a chrome plated steel e brake handle and is designed after the automotive industry standards. The ratchet cut gear plate and lock are heat treated for strength and safety. Special feature includes 4-point mounting capabilities for floor mount or side mounting for custom applications.

    Comes complete with clevis for installation with Lokar Emergency Brake Cables, Lokar # EC-80FU, Speedway Motors # 491-80FU suggested below. Cables are sold separately.

    Lokar Install Tip:  Every think about mounting the floor mount hand brake sideways in front of your seat?  You can!

  • Lokar EFB-9000 Under Dash Emergency Brake Foot Pedal, Brushed Aluminum
    Lokar EFB-9000 Under Dash Emergency Brake Foot Pedal, Brushed Aluminum
    x
                

    Lokar's under-dash emergency brake pedal offers easy operation in a clean, out of the way assembly. Mounted bracket can be adjusted to fit firewall-to-dash distances of 9 to 13 inches.  Pedal arm measures 10 inches and is available with a brushed aluminum or chrome plated finish.

    Under-dash brake pedal works with Connector Cable kit 491-8001HT (which is available in stainless or black) and Universal Cables 491-80FU.

    Under-Dash E-Brake Installation Instructions (PDF)

  • Lokar S-68148 12 Inch Replacement Shifter Lever
    Lokar S-68148 12 Inch Replacement Shifter Lever
    x
                These Lokar Replacement ATS shifter sticks are  direct replacements for your Lokar ATS automatic shifters. They are  manufactured from steel and are chrome plated for show-quality looks.  Available in different lengths, Lokar replacement ATS shifter sticks are  the perfect choice for your Lokar shifter.
    • 12 in. long
    • Replacement shifter stick only
    • Sold individually
  • Lokar KD-2350U TH350 Kickdown Kit
    Lokar KD-2350U TH350 Kickdown Kit
    x
                

    These Turbo 350 transmission kickdown kits have a stainless bracket that mounts on rear manifold bolts. Designed for 4 barrel carburetors on S/B Chevy engines. Kit includes extender for more versatility in adjusting cable length where needed. For TH350 transmission application.

    Note: Cable housing cannot be cut to fit.

  • Lokar SRK-4000 Carburetor Bracket and Return Spring
    Lokar SRK-4000 Carburetor Bracket and Return Spring
    x
                

    Stainless bracket mounts to rear of Holley, Edelbrock, AFB, Quadrajet, Demon, and In-Line Dual Quads. Stainless bracket and dual stainless springs are used to mount Lokar’s Throttle Cable and Kickdown kits. Design provides improved clearance on Edelbrock carbs. Includes tension screw to prevent bracket from movement under extreme pressure on a kickdown cable, such as with a 700-R4 transmission.

    Mounts Lokar Throttle Cables and Kickdowns for a nice clean setup. Includes allen wrench to adjust the set screw.

  • Lokar ATA-1000 Ford AOD Selector Shaft and Arm, 1/4 Slot And Hole
    Lokar ATA-1000 Ford AOD Selector Shaft and Arm, 1/4 Slot And Hole
    x
                

    Lokar's Ford AOD Selector Shaft and Arm is the solution to hunting for the right part. By standardizing the shift linkage for aftermarket applications, Lokar has eliminated the guess work and saves you time and money.

    This fully adjustable shaft and arm finally allows for installation on numerous applications.

    Features

    • Replaces factory selector shaft and arm
    • Adjustable arm simplifies finding the proper ratio between the shifter and the transmission
    • Arm designed to be installed in any 360 degree position for versatility
    • Kickdown seal installed in selector shaft
    • Zinc plated with stainless steel hardware
    • Can be used with many aftermarket shifters
    • Detailed instructions
  • Lokar BAG-6099 1967-69 Camaro/Firebird E-Brake Pedal Pad
    Lokar BAG-6099 1967-69 Camaro/Firebird E-Brake Pedal Pad
    x
                These billet aluminum pads are the perfect finishing touch for your dream car. The pedal pads attach to your existing brake pedals. 
            
  • Lokar DLR2100 Universal Door Latch Cable
    Lokar DLR2100 Universal Door Latch Cable
    x
                

    These Lokar door release cable kits include the necessary mounting brackets and cable to complete the installation. They are designed to replace your factory-style door release cables. The universal cable is 4 ft. long and should fit most applications.

    • For use with OEM latch configurations or aftermarket bear claw latches and handles
    • Companion part to 491-2000 & 491-2001 Handles

    Kit includes:

    • 2 Cables
    • Cable ends & clevises
    • Pulleys/shields
  • Lokar DBW-6070 Chrome Drive-By-Wire Spoon Pedal Arm for DBW Throttle
    Lokar DBW-6070 Chrome Drive-By-Wire Spoon Pedal Arm for DBW Throttle
    x
                Chrome plated steel pedals for use with Lokar drive-by-wire throttle control modules. Pedals feature a splined adjustable mount and spring-loaded return.
            
  • Lokar KD-2400HT TH400 Hi-Tech Electric Kickdown Kit
    Lokar KD-2400HT TH400 Hi-Tech Electric Kickdown Kit
    x
                

    Lokar's Hi-Tech TH400 Electric Kickdown is cable-operated. Electric switch is housed in a billet aluminum box that mounts with transmission pan bolts.* Kit includes "U-Cut-to-Fit" outer housing in stainless steel. This Turbo 400 kickdown is designed with a specially extruded liner for extended life of the cable, aluminum fittings and stainless steel inner wire and stainless mounting bracket. This design eliminates mounting unsightly electrical switches on carburetor, manifold, or near throttle pedal. Complete installation instructions included in kit.

    Can be mounted in a variety of locations within 48" of carburetor.

  • Lokar S-3026 Transmission Dipstick Tube Funnel Adapter
    Lokar S-3026 Transmission Dipstick Tube Funnel Adapter
    x
                These funnel adapters from Lokar adapt your  standard funnels to Lokar transmission dipstick tubes. They're easy to  use, too--simply insert the aluminum piece into the transmission  dipstick opening. Then push your regular automotive funnel into the top  of the plastic tube, and fill.
            
  • Lokar 70-BHBF Billet Hand Brake Boot Ring With Floor Mount Boot
    Lokar 70-BHBF Billet Hand Brake Boot Ring With Floor Mount Boot
    x
                

    Lokar Hand Brake Boots include a black Naugahyde boot, billet aluminum ring with ball milled edge, and stainless screws.

    It also includes a foam rubber seal to eliminate air flow from the floor through the boot.

    All boots hug the shifter lever and there are no unsightly pull ties or laces.

  • Lokar EHB-7001 Emergency Brake Warning Light Switch
    Lokar EHB-7001 Emergency Brake Warning Light Switch
    x
                

    This emergency brake warning switch kit triggers your dash light or buzzer to alert you when your emergency brake is engaged.

    Kit includes a switch, stainless trigger, 2 electrical terminals, e-clip and pin and 2 mounting bolts.

    Works with floormount hand brake levers only (491-7000 & 491-07000).

  • Lokar 70EHBF Floor Mount E-Brake Boots
    Lokar 70EHBF Floor Mount E-Brake Boots
    x
                Each Lokar floor mount emergency brake boot kit includes a black naugahyde boot, polished stainless base ring and stainless screws.

    The trim ring for this boot measures 2-1/2" x 6-1/4" on the outside and 1-1/2" x 5-1/4" on the inside.
  • Lokar SP-1500U GM Speedometer Drive Cable Kit, Black
    Lokar SP-1500U GM Speedometer Drive Cable Kit, Black
    x
                

    The finishing touch to your mechanical (cable-drive) speedometer installation in your GM or Mopar. Includes a 7 ft. long glossy black vinyl housing and inner cable (you trim to length) with billet aluminum ends, and instructions.

    Works with all cable-drive aftermarket and original equipment speedometers that have a male 5/8"-18 thread connection. Has a 7/8"-18 end for the transmission.

  • Lokar ATS6350AN GM TH350 Nostalgia Shifter w/ Free boot
    Lokar ATS6350AN GM TH350 Nostalgia Shifter w/ Free boot
    x
                

    Lokar's Nostalgia Turbo 350 Shifter is designed with 2 bends in the lever and a black mushroom knob for a nostalgic hot rod look. It has 23" lever, Teflon-lined Safety-Lock-Out button, main plate, and side brackets.

    For GM Turbo Hydramatic 350 or TH350 automatic transmissions.

    TH350 Shifter Installation Instructions 

    Free boot with purchase of Nostalgia Shifter!

  • Lokar 70-FMB Rectangular Floor Mount Shifter Boot, Stainless Ring
    Lokar 70-FMB Rectangular Floor Mount Shifter Boot, Stainless Ring
    x
                This black naugahyde shifter boot iincludes a boot, stainless base ring, and stainless screws.  It has a rectangular stainless steel ring which measures 6-3/4" x 5-1/4" on the outside and 5-1/2" x 4" on the inside.
            
  • Lokar SK-6862 Skull 3-Speed Automatic Shift Knob
    Lokar SK-6862 Skull 3-Speed Automatic Shift Knob
    x
                

    The finishing touch for your hot rod! Polished, high luster aluminum Skull auto shift knob is designed with a safety lock-out button and functions with the same smooth operation as Lokar's original factory installed knobs (only works with Lokar shifters). The Teflon lining guarantees smooth operation. Knob button engraved with specific transmission shift pattern.

    All shift patterns meet NSRA safety requirements. Knobs operate with Lokar 3-speed automatic shifters ONLY.

  • Lokar HL-1900 Anchor-Tight Stainless Steel Headlight Braid
    Lokar HL-1900 Anchor-Tight Stainless Steel Headlight Braid
    x
                

    No, this is not just another headlight conduit! This is Lokar's design technology for "U-Cut-to-Fit", non-kinking stainless steel headlight braid. Designed with threaded steel studs to insure that you won't experience any of the typical separation between braid and fitting that shows unsightly wires out in the open. Pull, tug or bump your headlight braid and it will stay in place, leaving you with protected wires and a clean set up. Kit comes complete with two 14" flexible braided stainless steel Teflon-lined housings, threaded STEEL studs, billet aluminum fittings, aluminum grill shell washers and four 26" headlight wires.

    • Non-kinking stainless steel
    • Threaded steel studs to insure no separation between braid and fitting
    • Comes complete with:
      • (2)Two 14" flexible braided stainless steel Teflon-lined housings
      • Threaded STEEL studs
      • Billet aluminum fittings
      • Aluminum grill shell washers
      • (4)Four 26" headlight wires
  • Lokar XTCB-40DQ Throttle Cable Bracket For Edelbrock Performer Carbs
    Lokar XTCB-40DQ Throttle Cable Bracket For Edelbrock Performer Carbs
    x
                Throttle Cable Bracket, Manifold Mounting. For Edelbrock Performer or Performer AVS Carbs.
    • Black anodized
    • Billet aluminum
    • Bracket Mounts to intake manifold
    • Accepts Transmission Kickdown Cable
    • Accepts Throttle Return Spring
    • Return Spring NOT Included
    • Hardware NOT Included
  • Lokar XTD-3350400FM TH350-TH400 Midnight Series Transmission Dipstick
    Lokar XTD-3350400FM TH350-TH400 Midnight Series Transmission Dipstick
    x
                You have flexibility with our Teflon-lined Flexible Braided Stainless Turbo 350 or Turbo 400 Transmission Dipstick.  Kit comes complete with braided   stainless outer housing and heat resistant E-Z to read flexible inner   dipstick measuring cable.  Inner cable is molded with appropriate trans   fluid levels.  Billet aluminum handle and billet aluminum fittings   complement Lokar's Flexible Engine Dipsticks. This Turbo 350 or Turbo 400 transmission dipstick kit includes dipstick   funnel adapter to assist in filling.            Designed for "push in"  style transmissions.  Dipstick seals  with double            O-rings.   Kit comes complete with installation instructions. For TH350 or TH400 transmission application.
            
  • Lokar EC-81FC E-Brake Clevis for Ford Explorer & Wilwood
    Lokar EC-81FC E-Brake Clevis for Ford Explorer & Wilwood
    x
                

    Lokar Clevis Kits adapt Lokar Emergency Brake Cable kits to Ford Explorer and Wilwood Explorer-style rear disc brakes with internal drum hubs (like our 910-31938). Also works with late Corvette rear disc brakes with internal shoe-type parking brake (requires some file-fitting).

    Note: Clevis is included in kit 491-81FU. Ford Explorer rear disc brakes will need a pair of 916-41021 nuts to secure the cable ends to the thick cast iron OEM brackets.

  • Lokar GPS-6016 1/2 Inch Billet Alum Floor Mount Throttle Pedal Spacer
    Lokar GPS-6016 1/2 Inch Billet Alum Floor Mount Throttle Pedal Spacer
    x
                

    Lokar's throttle pedal spacer is designed for use if the throttle pedal and mounting base need to be mounted further away from the firewall.  They are made specially for Lokar's billet aluminum floor mount Eliminator throttle pedals.

    • 1/2" Thick
    • Designed for extra clearance
    • Quality steel construction
    • For billet aluminum floor mount Eliminator throttle pedals

    Instructions (PDF)

  • Lokar Hi-Tech Stainless Throttle Cable Kit
    Lokar Hi-Tech Stainless Throttle Cable Kit
    x
                

    Lokar Hi-Tech Braided Stainless Steel Throttle Cables are designed with a specially extruded Teflon liner for unparalleled smoothness and long life. Cables are equipped with aluminum fittings and aluminum ferrules to eliminate fraying. “U-Cut-to-Fit” outer housing is available in 24" or 36" lengths with a “U-Cut-to-Fit” stainless inner wire. Clevis is designed without cotter pins or set screws. Adapts to factory and aftermarket pedals.

    Cables can be cut to fit nearly any installation. Kits come complete with installation instructions. 

  • Lokar BL-1400U Neutral Safety Switch or Back-Up Light Switch Kit
    Lokar BL-1400U Neutral Safety Switch or Back-Up Light Switch Kit
    x
                

    This switch kit is designed to be used with a Lokar shifter and can be set up as either a neutral safety switch or a back-up light switch with a little creativity.  It can be adapted to most any application.

    Neutral Safety Switch Installation Instructions (PDF)  

  • Lokar EC-80FU Floor/Dash Mount Emergency Brake Cables
    Lokar EC-80FU Floor/Dash Mount Emergency Brake Cables
    x
                

    Cables are designed for use with Lokar Floor Mount & Under Dash Mount Emergency Hand Brakes. Kit comes equipped with quality one-piece aluminum adjusters and aluminum ferrule to eliminate fraying of stainless housing. Outer housing is designed with specially extruded liner for extended life of the cable. Stainless inner cable resists moisture.

    Design allows rear end backing plate fittings to be removed without removing brake cables. Lokar cables also feature adjustable cable lock and clevis. Kit is complete with cable bracket and spacers. Kit includes two 8 foot black outer housings that “U-Cut-to-Fit".

    See Application tab for model-specific information.

    EC80FU E-Brake Cable Instructions (PDF) 

    Connector Cable Installation Instructions (PDF) 

  • Lokar TD-3350400FM TH350-TH400 Firewall Mount Transmission Dipstick
    Lokar TD-3350400FM TH350-TH400 Firewall Mount Transmission Dipstick
    x
                

    This Turbo 350 or Turbo 400 transmission dipstick features braided stainless covered tubing with billet look handle and stainless hardware. Flexible design gives added mounting versatility for your TH350 or TH400 transmission.

     

  • Lokar KD-2727HT Chrysler 727 Hi-Tech Kickdown Kit
    Lokar KD-2727HT Chrysler 727 Hi-Tech Kickdown Kit
    x
                

    Lokar's "U-Cut-to-Fit" Hi-Tech Kickdown Cables are designed with a specially extruded liner for extended life of the cable – not to be confused with ordinary brake hose. Kickdown features aluminum fittings with ferrule to eliminate frayed cable ends. Kickdowns are adaptable for all types of manifolds including tunnel ram, blower manifolds and Weber induction systems.  Complete instructions included in kit.

    Throttle Body and Carb End Fittings Guide (Link)

    4912727 Installation Instructions (PDF) 

     

  • Lokar 70-EHBT Trans Mount E-Brake Boot
    Lokar 70-EHBT Trans Mount E-Brake Boot
    x
                Each Lokar transmission mount emergency brake boot kit includes a black naugahyde boot, polished stainless base  ring and stainless screws.

    The dimensions for this boot ring are 2-1/2" x 6-1/4" outside diameter, and 1-1/2" x 5-1/4" inside diameter.
  • Lokar 0401024 6-Position Adjustable Hood Prop, Polished
    Lokar 0401024 6-Position Adjustable Hood Prop, Polished
    x
                

    Constructed of high quality billet aluminum and stainless steel, this 6 position Adjustable-Level Hood and Trunk Prop will offer great looks as well as functionality to your ride.  When the hood or trunk is raised, the Hood and Trunk Prop will automatically lock itself into position.  This eliminates the need for two hands when opening your hood or trunk.  A quick release allows the hood to be opened to its max for easy engine access.  Each level of the six-level prop increases the opening of the hood or trunk by approximately 6 inches.

    Collapsed:  14"

    Extended:  19-3/4"

    Level Spacing:  1-1/8"

    491-40102 Instructions (PDF)

  • Lokar HR-1100U Hood Release Cable Kit, Black Housing
    Lokar HR-1100U Hood Release Cable Kit, Black Housing
    x
                

    This kit comes complete with billet aluminum handle assembly and cables. The cables are "U-Cut-to-Fit", designed with specially extruded liner for extended life of the cable, with billet aluminum fittings and stainless steel inner wire. Hood release kit includes aluminum firewall fittings and cable stop. The outer housing is 18 inches inside the vehicle and 6 feet under the hood. The inner wire is 9 feet long. Requires cable-operated latches.

    • Comes complete with billet aluminum handle assembly and cables
    • Specially extruded liner for extended life of the cable
    • Billet aluminum fittings and stainless steel inner wire
    • Includes aluminum firewall fittings and cable stop
    • Outer housing is 18 inches inside the vehicle and 6 feet under the hood
    • Inner wire is 9 feet long
    • Requires cable-operated latches
  • Lokar ATS6350BM TH350 Hi-Tech Shifter, 16 Inch
    Lokar ATS6350BM TH350 Hi-Tech Shifter, 16 Inch
    x
                

    Designed for Chevy Turbo 350 automatic transmissions. This unique shifter features reverse and neutral safety lockout button and safety switch. 12 point installation positioning, shifter rotation for precise comfort. Brushed hi-tech aluminum knob.

    • For TH350 transmission application
    • Neutral Safety Switch
    • Positive Lock-Out in Park and Neutral
    • 360-degree lever rotation for extra leg room
    • Out-from-under-the-dash and away-from-the-seat lever adjustments
    • Brushed aluminum shifter knob
    • Easy-to-remove shifter knobs for simple boot installation
    • Teflon lined button in shifter knobs for smooth operation
    • Chrome-plated lever
    • Gold iridited bracketry
    • All hardware included for installation
  • Lokar EHB-9200 Under-Dash Emergency Brake Arm, Brushed Aluminum
    Lokar EHB-9200 Under-Dash Emergency Brake Arm, Brushed Aluminum
    x
                This hand operated emergency brake arm is the perfect solution when space is at a premium. It fits in a firewall-to-dash space as small as 11 inches and does not require the cable to enter through the firewall. The sturdy, easy grip e brake handle has a brushed aluminum finish. Hand operated brake arm works with Connector Cable kit 491-8001HT, which is available in stainless and black, and Universal Cables 491-80FU.
            
  • Lokar ACA-1800 Billet Adjustable Column Arm Kit, GM Transmissions
    Lokar ACA-1800 Billet Adjustable Column Arm Kit, GM Transmissions
    x
                

    Simplify connecting your column shift to your transmission with a Lokar machined billet aluminum Adjustable Column Shift Linkage Kit. Works with all aftermarket GM style columns and most GM factory columns. Our rigid, clean line design allows the proper ratio adjustment between the transmission and the indicator on the column.

    • Billet aluminum offers rigidity
    • 3/4-48 spline designed for 3600 rotation allowing proper ratio
    • Both 3/8-16NC and metric 10-1.50mm threaded nuts for mounting electrical accessories
    • Kit includes all hardware, including column bushing and rod ends
    • "U-Cut-to-Fit" Stainless Connecting Rod
    • No threading necessary
    • Fits GM TH-350, TH-400, 700-R4, TH-200, 200-4R, 4L60, 4L60E and 4L80E transmissions

    Ordering Idea:  You can use the Backup Light or Neutral Safety Switch Kit # 491-1400 with GM Column Shift Linkage, except for 4L60E and 4L80E transmissions.

    Tech Tip:  If you don't have a direct line of sight between the column shift arm and the transmission shift arm, consider using column cable shift linkage # 491-1804 or # 491-1805

     

     

  • Lokar KD-2700HT 700R4 Hi-Tech Kickdown Kit
    Lokar KD-2700HT 700R4 Hi-Tech Kickdown Kit
    x
                

    These Hi-Tech 700-R4 transmission kickdown kits have a braided stainless, Teflon lined cable, which will adapt to virtually any 700R4 carburetor manifold (including tinnel ram, blower manifolds, and Weber induction systems). 36" long, you-cut-to-fit cable attaches to the stainless bracket # 491-4350 or # 491-SRK4000.

    491-2700HT Instructions (PDF)

  • Lokar ATS6700AN Nostalgia GM 700R4 Shifter w/ Free Boot
    Lokar ATS6700AN Nostalgia GM 700R4 Shifter w/ Free Boot
    x
                

    Lokar's Nostalgia 700R4 Shifter is designed with 2 bends in the lever and a black mushroom knob for a nostalgic hot rod look. It has 23" lever, Teflon-lined Safety-Lock-Out button, main plate, and side brackets.

    Tech note:  Shifter lever lengths start 3-1/2" above the top of the transmission.

    For GM 700R-4 automatic overdrive transmissions.

    Free boot with purchase of Nostalgia Shifter!

  • Lokar Universal Black Throttle Cable Kit
    Lokar Universal Black Throttle Cable Kit
    x
                

    Lokar universal black throttle cables are designed with a specially extruded Teflon liner for unparalleled smoothness and long life. Cables are equipped with aluminum fittings and aluminum ferrules to eliminate fraying. “U-Cut-to-Fit” outer housing is available in 24" or 36" lengths with a “U-Cut-to-Fit” stainless inner wire. Clevis is designed without cotter pins or set screws. Adapts to factory and aftermarket pedals.

    Cables can be cut to fit nearly any installation. Kits come complete with installation instructions. 

    491-1000U Instructions (PDF)

  • Lokar ATS60C4AN Nostalgia Ford C4 and C5 Shifter w/ Free Boot
    Lokar ATS60C4AN Nostalgia Ford C4 and C5 Shifter w/ Free Boot
    x
                

    Lokar's Nostalgia Ford C4 and C5 Shifter is designed with 2 bends in the lever and a black mushroom knob for a nostalgic hot rod look. It has 23" lever, Teflon-lined Safety-Lock-Out button, main plate, and side brackets.

    For Ford C4 and C5 SelectShift Cruise-O-Matic automatic transmissions.

    Free boot with purchase of Nostalgia Shifter!

  • Lokar MSL6B2 Double Bend Shift Lever, 16 Inch
    Lokar MSL6B2 Double Bend Shift Lever, 16 Inch
    x
                If you went to the junk yard to get that modern manual transmission, you probably didn't get the shifter lever.  We have just what you need for that T5, T45, or T56 transmission. 

    Lever consists of a shift handle and mount bolts only, it does not include a boot, linkage or knob.

    Lever is for 7/8" center to center mounting holes and has 3/8"-24 threads for the knobs.
  • Lokar SK-6878 Shift Knob Adapter, 3/8-16 Thread
    Lokar SK-6878 Shift Knob Adapter, 3/8-16 Thread
    x
                This adapter allows you to use a shifter knob that has a 3/8"-16 thread. By pushing straight down on the knob, you can shift gears but retain the original safety features. 
            
Goto Previous PagePrevious Page
1 2 3 4 5 ... 9