Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Filter

Page 1 of 20

Intake Manifolds

Browse our wining racing and performance auto parts.

MORE
Intake Manifolds
X

Shop Intake Manifolds At Speedway Motors

Maximize your horsepower with Speedway Motors massive inventory of performance intake manifolds. You will be able to find the intake manifold that matches with your cam and valvetrain perfectly to create some serious power. Whether you you have a set-up that needs a single plane, dual plane, or tunnel ram intake manifold, Speedway Motors has the best selection at the lowest prices around. Also you can find the hard to find triple deuce intake manifolds right here from top brands like Offenhauser, Edelbrock, Weiand, and Dart. Start getting the most out of your engine today with intake manifold from Speedway Motors!

Intake Manifolds

Products
Featured Products
  • Product Rating: 5.00 Stars
    $139.99
    Quick View Details
    x
                

    Designed for 1986 and earlier 262-400 cubic-inch Chevys, the Performer EPS dual-plane manifold is optimized to deliver superior performance over other low-rise dual plane manifolds. This small-block Chevy manifold has a runner design that's "tuned" for peak torque around 3500 rpm on a 350-inch engine and it produces power from off-idle to 5500 rpm.

    Dyno tests showed gains of 5 hp and 9 ft/lbs of torque over the standard Performer manifold on a 350 Chevy. From 3000 to 4500 rpm, the increases averaged 5+ ft/lbs. of torque for more performance where you need it most.

    IMCA racing approved.

    325-2701 Instructions (PDF)

    Go to Product Page
  • Product Rating: 5.00 Stars
    From: $139.99
    Quick View Details
    x
                

    The Power+Plus Cyclone Manifold is a direct replacement for the stock manifold on 1957-’95 Small Block Chevy non-EGR engines. Includes special adapter bushings to fit ’87-’95 engines. Use the stock Quadra-Jet carb or 500-650 cfm vacuum secondary carburetor. Kit includes adapter plate to permit use of certain square bore style carburetors. Power+Plus Manifolds are cast from steel molds, not from sand molds. Permanent molds provide a tighter grain casting thereby reducing the occurrence of porosity which can mar the polished finish. Additionally, each Power+Plus Manifold is 100% pressure tested for leaks to eliminate installation problems. This is our most popular manifold and is showing up on many performance street machines and street rods.

    RPM range is idle to 5500.  Availabe in plain or show polished.

    NOTES: Manifold includes adaptor bushings to also fit 1987-1995 iron or aluminum heads.  Polished intakes have EGR ports with block plates.

     

     

    Go to Product Page
  • Product Rating: 4.50 Stars
    From: $149.99
    Quick View Details
    x
                

    If you are running a little more motor, then this is the intake for you! The Professional Products Typhoon manifold is a high performance dual plane, 180° street manifold designed to be used with Holley, Carter AFB, or Edelbrock square flange carbs. For 1957-86 S/B Chevy and will fit 1987-95 heads with supplied adapters.

    • RPM range is 1500-6500
    • Available plain or show polished
    • Power comparable to single plane manifolds yet retains throttle response/driveability of a dual plane
    • Cast-in nitrous bosses
    • Water outlets at all four corners
    • Dual distributor hold-downs
    • Provisions to add an oil fill tube
    • Accepts late model waterneck, A/C, alternator, and HEI

    910-11265 Dyno Sheet (PDF)

    910-11265 Instructions (PDF) 

    Go to Product Page
  • On Sale
    No Reviews
    $944.95 $639.99
    Quick View Details
    x
                For 4000 to 75000 RPM high-performance engines. For non-emission racing applications. For engines producing 400 to 540+ horsepower. With shorter larger runners for power to 7500 RPM. Base features air gap to cool runners. Accepts stock style fuel rails. Upper plenum cover is powder coated titanium grey. Includes throttle cable bracket.
    • For 4000 to 7500 RPM High-Performance Engines
    • For Non-Emission Racing Applications
    • For Engines Producing 400 to 540+ Horsepower
    • With Shorter Larger Runners For Power To 7500 RPM
    • Base Features Air Gap to Cool Runners
    • Accepts Stock Style Fuel Rails
    • Upper ; Plenum Cover Powdercoated Titanium Grey
    • Includes Throttle Cable Bracket

    Installation Instructions (PDF)

    Go to Product Page
  • No Reviews
    $174.99
    Quick View Details
    x
                

    Edelbrock's famous Performer manifold is designed for street 1955-86 small block Chevys. This manifold is a stock replacement/street legal part for 302/327/350 V8s with OEM 4 bbl. or Edelbrock Performer Series carbs. Will also work on 1966-72 (1973 non-California) cars, 1966-83 trucks and Suburbans; except stock equipped EGR.

    Performers accept late-model choke, waterneck, air-conditioning, alternator and H.E.I. Not for 1987 and later cast iron or Chevy Bowtie heads. Will fit 1987 and later stock aluminum heads. 

    Made in the U.S.A. 

    325-2101 Instructions (PDF)

    NOTE: This intake does not work with kickdown kit 491-2350U.

    Go to Product Page
  • On Sale
    No Reviews
    $683.95 $489.99
    Quick View Details
    x
                These Edelbrock 2x4 and 3x2 intake manifolds feature a balanced 180 degree firing order port runner arrangement and contain exhaust heat riser as well as a front oil filter tube boss.  They are designed for use with Small Block Chevy V8 engines with 1996 and later Vortec L31 cast iron cylinder heads or Edelbrock E-Tec aluminum heads.  They feature a polished finish and are ideal for an idle to 5,500 rpm range.
    • For 1996+ Vortec (L31) or Edelbrock E-Tec Heads
    • Manifold has a Balanced 180+ Firing Order
    • Contains Exhaust Gas Heat Riser
    • Offers Excellent Performance Potential
    • Front Oil Filler Tube Boss Included
    • Carburetor Center-to-Center Dimensions = 5-1/2 in
    • Also Available Polished PN[5419] But Not Fit HEI
    • Use Rochester 2GC (small 1-7/16 in bore)

    Installation Instructions (PDF)

    Go to Product Page
  • Product Rating: 4.80 Stars
    $249.99
    Quick View Details
    x
                

    Said to be its most popular flathead intake, Offenhauser’s 2x2 Regular intake has closely spaced carbs. The Offy regular dual intake accepts two 3-bolt carbs. Great addition to a street oriented engine. Has 4-3/4" carb centers.

    The generator may not fit into the stock location due to the clearance issue with the carburetor.  The generator can be relocated to the passenger side using bracket # 325-1146. If using a GM alternator, use our chrome 916-67909 or plain 916-67910 bracket.

    • Carb Centers:  4-3/4"
    • Carb pads are angled as they were on stock 49-53 intakes
    • Front drivers side accessory hole is for draft tube and measures 1.25"
    • Rear drivers side accessory hole is for oil fill tube and measures 1.375"
    Go to Product Page
  • Product Rating: 4.70 Stars
    $289.99
    Quick View Details
    x
                

    Designed for 1986 and earlier 262-400 cubic-inch Chevys, the Performer EPS dual-plane manifold is optimized to deliver superior performance over other low-rise dual plane manifolds. This small-block Chevy manifold has a runner design that's "tuned" for peak torque around 3500 rpm on a 350-inch engine and it produces power from off-idle to 5500 rpm.

    Dyno tests showed gains of 5 hp and 9 ft/lbs of torque over the standard Performer manifold on a 350 Chevy. From 3000 to 4500 rpm, the increases averaged 5+ ft/lbs. of torque for more performance where you need it most. Match with a dependable Edelbrock square-bore carburetor for maximum street performance gains.

    325-27014 Instructions (PDF)

    Go to Product Page
On Sale
No Reviews
$674.95 $495.99
No Reviews
$231.99
In Stock In Stock
This part is in stock.
In Stock
On Sale
No Reviews
$719.95 $584.99
On Sale
No Reviews
$745.95 $549.99
On Sale
No Reviews
$447.95 $314.99
On Sale
No Reviews
$759.95 $549.99
On Sale
No Reviews
$873.95 $659.99
On Sale
No Reviews
$322.95 $239.99
On Sale
No Reviews
$936.95 $629.99
On Sale
No Reviews
$572.95 $429.99
Garage Sale
No Reviews
From: $199.99
In Stock In Stock
This part is in stock.
In Stock
On Sale
No Reviews
$773.95 $599.99
On Sale
No Reviews
$365.95 $254.99
Product Rating: 5.00 Stars
$149.99
In Stock In Stock
This part is in stock.
In Stock
On Sale
No Reviews
$513.95 $459.99
On Sale
No Reviews
$652.95 $499.99
On Sale
No Reviews
$379.95 $264.99
On Sale
No Reviews
$624.95 $444.99
On Sale
No Reviews
$605.95 $399.99
On Sale
No Reviews
$1,042.95 $846.99
On Sale
No Reviews
$764.95 $575.99
On Sale
No Reviews
$400.95 $284.99
No Reviews
$287.99
In Stock In Stock
This part is in stock.
In Stock
Garage Sale
No Reviews
$289.99 $229.99
In Stock In Stock
This part is in stock.
In Stock
On Sale
No Reviews
$654.95 $509.99
On Sale
No Reviews
$453.95 $369.99
On Sale
No Reviews
$476.95 $397.99
On Sale
No Reviews
$502.95 $409.99
On Sale
No Reviews
$725.95 $569.99
On Sale
No Reviews
$616.95 $419.99
Page 1 of 20