Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Intake Manifolds At Speedway Motors

Maximize your horsepower with Speedway Motors massive inventory of performance intake manifolds. You will be able to find the intake manifold that matches with your cam and valvetrain perfectly to create some serious power. Whether you you have a set-up that needs a single plane, dual plane, or tunnel ram intake manifold, Speedway Motors has the best selection at the lowest prices around. Also you can find the hard to find triple deuce intake manifolds right here from top brands like Offenhauser, Edelbrock, Weiand, and Dart. Start getting the most out of your engine today with intake manifold from Speedway Motors!

"Intake Manifold, Intake Manifolds" Page 1 of 4

  • Weiand 7530 Team G Chevy Small Block Manifold
    Weiand 7530 Team G Chevy Small Block Manifold
    SKU-8057530
    x
                

    The Weiand Team G is a 360° single-plane, open plenum manifold developed for competition S/B Chevy V8s. Features an isolated plenum and isolated water cross-over to keep the incoming air/fuel charge cooler for improved power. Effective power range is 2800-7200 RPM.

    Square carburetor mounting flange.

    Chevy Small Block Team G Manifold Installation Instructions (PDF)

     

  • Power+Plus Typhoon Small Block 351W Ford Manifold
    Garage Sale
    Power+Plus Typhoon Small Block 351W Ford Manifold
    SKU-91011235
    x
                

    The Professional Products Typhoon manifold for 351W Fords is the ultimate performance dual plane manifold. Its long runner 180° design provides the best of both worlds - good top end power without sacrificing bottom end torque. Accepts square flange carbs.

    RPM range is 1500-6500. Available plain, show polished or chrome.

    This manifold has features not found in manifolds:

    • Includes a rear water crossover passage
      • Provides balanced cylinder head temperatures
      • Overall cooler running engine
    • Cast-in bosses for possible addition of direct port nitrous injection 

    910-11235 Instructions (PDF) 

    910-11235 Special Installation Notes (PDF) 

     

    Chrome intakes are clearance priced.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS    

     

  • Edelbrock 5001 Small Block Chevy Torker II Intake Manifold
    Edelbrock 5001 Small Block Chevy Torker II Intake Manifold
    SKU-3255001
    x
                

    Designed for 1955-86 high-performance 262-400 c.i.d. small-block Chevy V8s operating in the 2500-6500 RPM range. The Torker II is an updated version of original Torker offering better performance. Manifold accepts late-model waterneck, air-conditioning, alternator and H.E.I. distributor.

    Will fit Corvette and 1987 and later stock aluminum heads. Will NOT fit 1987 and later cast iron heads and will NOT cover port openings of Chevrolet Bowtie or LT1 heads.

    NOT intended for use on heavy vehicles (trucks, vans etc.).

    Torker II Intake Manifold Installation Instructions (PDF)

  • Edelbrock 2921 Victor Jr. Ford 302 Intake Manifold
    Edelbrock 2921 Victor Jr. Ford 302 Intake Manifold
    SKU-3252921
    x
                

    The Edelbrock Victor Series intake manifolds have set the standard for quality and performance in the racing industry. The Victor Jr. 302 is designed for Ford 260-289-302 competition engines using modified stock cast iron or aftermarket Windsor-style cylinder heads.

    The Victor Jr. 302 has no rear water crossover. Port exit size at cylinder head is 1.90" x 1.08" with enough extra material to open it up to 2.10" x 1.18".

    325-2921 Instructions (PDF)

  • Garage Sale - SB Chevy Dual Q-Set Top
    $229.99
    $289.99
    Garage Sale
    Garage Sale - SB Chevy Dual Q-Set Top
    SKU-5605988
    x
                
    Offenhauser dual turbo-thrust intake for small block chevy.
     
    This part is Garage Sale priced because it has been discontinued from our product line.
     
     NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS
  • Edelbrock 5408 348/409 Dual Quad Intake Manifold, Small Port
    Edelbrock 5408 348/409 Dual Quad Intake Manifold, Small Port
    SKU-3255408
    x
                

    Performer RPM Dual-Quad intake manifolds are designed to fit 1958-1965 Chevrolet 348/409 "W" Series engines. These manifolds deliver performance improvements in the 1500-6500 rpm range with Edelbrock Performer Series dual-quad carburetors, and they accept Edelbrock dual-quad accessories including fuel lines, throttle linkage, and air cleaners.

    Includes oil fill tube (not installed) and matching push-in breather cap. Use with dual quad linkage and fuel line at right. Carb center-to-center measurement is 6-7/16".

    325-5408 Instructions (PDF)

  • Edelbrock 75014 RPM Air-Gap S/B Chevy Intake Manifold, Endurashine
    Edelbrock 75014 RPM Air-Gap S/B Chevy Intake Manifold, Endurashine
    SKU-32575014
    x
                

    Designed for 1955-86 262-400 c.i.d. Chevrolet V8s, the award-winning RPM Air-Gap incorporates the same race-winning technology that's used on the Victor Series competition intakes. The air-gap design features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power.

    Manifold features rear water outlets, two distributor clamp locations and nitrous bosses. Accepts all 1976 and later alternator and A/C brackets for the street. The heater outlet boss is angled for proper fit over the valve cover. The temp sensor boss clears all waternecks.

    • For square-bore carburetors only
    • No provision for exhaust-heated chokes and no exhaust crossover
    • Not for 1987 and later cast iron heads
    • Will not fit under stock Corvette hood

    325-75014 Instructions (PDF)

    Edelbrock Rebate May-June (PDF)

  • Edelbrock 5412 289-302 Ford Three Deuce Tri Power Intake Manifold
    Edelbrock 5412 289-302 Ford Three Deuce Tri Power Intake Manifold
    SKU-3255412
    x
                
    This intake for 3 deuces on a small block Ford does NOT have clearance for the Powerfire, Flamethrower, OEM, or any HEI style distributor. It requires the smaller cap as available on distributor 547-8352
    • 289-302 Small Block Ford 3 deuce aluminum intake
    • Designed to use 3 bolt carburetors such as the Speedway 9 Super 7's
    • For Stock/OEM standard deck
    • RPM range, Idle-5,500
    • Low Rise, Dual-plane design
    • Improved throttle response
    • Made of aluminum
    • Natural finish
  • Edelbrock 7159 Performer RPM Chevy 348/409 Intake Manifold, Large Port
    Edelbrock 7159 Performer RPM Chevy 348/409 Intake Manifold, Large Port
    SKU-3257159
    x
                

    The Performer RPM W-Series intake manifolds are designed to fit 1958-1965 Chevrolet 348/409 "W-Series" big-block engines. Two versions are available; one for small-port cast iron heads and the other for factory large port heads. They both deliver improved performance in the mid to high rpm range (1500-6500 rpm) when combined with an Edelbrock Performer carburetor. Also features a front mounted oil fill tube for those who want the nostalgic look of Edelbrock's Classic series valve covers with no breathers.

    2.39" x 1.15" Port Exit 

    Includes chrome oil fill tube (not installed) and matching push-in breather cap. For square-bore carburetors only.

  • Eddie Meyer 1932-1948 Flathead Intake Manifold
    Eddie Meyer 1932-1948 Flathead Intake Manifold
    SKU-91015960
    x
                

    Performance never goes out of style! Eddie Meyer was a Flathead Ford genius, and you can take advantage of his knowledge and experience with this dual-carb intake reproduced from the original tooling. This short-runner, non-heated manifold fits 1932-1948 Flathead Ford and Mercury V8s.

    • Short, high-flow runners
    • Non-heated design
    • Requires offset generator mounting
    • 8-1/4" carb centers
  • Offenhauser 1035 1950-1959 Chevy 6-Cylinder Dual Carb Intake Manifold
    Offenhauser 1035 1950-1959 Chevy 6-Cylinder Dual Carb Intake Manifold
    SKU-5601035
    x
                

    Offenhauser Dual Carb intake manifolds provide a nostalgic appearance while equalizing fuel distribution to all cylinders, improving both performance and economy. With this lightweight cast aluminum manifold, your old "Stovebolt" will be more responsive across the RPM range. Use with two "big base" carburetors (2-15/16" bolt centers) typical of 1954-62 Chevys.

    • Fits 216-235-261 Chevy 6-cylinders
    • 1950-1959 engines w/ PowerGlide
    • 1953-1959 engines w/ Manual Transmission

     

    Included linkage kit is "non-progressive," meaning both carbs operate at the same time.

  • Garage Sale - Edelbrock 5425 Small Block Chevy Dual Quad Intake Manifold
    Garage Sale
    Garage Sale - Edelbrock 5425 Small Block Chevy Dual Quad Intake Manifold
    SKU-UP34273
    x
                

    Edelbrock's C-26 manifold is designed for 1955-1986 262-400 c.i.d. S/B Chevys with a power band of 1500-5000 rpm. This dual-quad is low profile for hood clearance on most vehicles. Air-conditioning bosses and front oil filler tube boss included. Stock alternator brackets DO NOT fit.

    H.E.I. distributor will fit. Use with 500 cfm Edelbrock carbs.

    Dual Quad Intake Manifold Installation Instructions (PDF)

     

    This intake is garage sale priced because it has been bolted on and returned.  This one also has some scratches.  Manifold only.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS   

  • Professional Products 53031 Chevy Rect. Port Hurricane Intake Manifold
    Professional Products 53031 Chevy Rect. Port Hurricane Intake Manifold
    SKU-91011272
    x
                

    These manifolds for Big Block Chevys with rectangler port cylinder heads. Designed for serious performance big block applications, they feature nitrous bosses, dual distributor holddowns, and four corner water ports. Rectangular port size at the gasket flange is 1.69-inches wide by 2.31-inches tall, which can be opened up to match the gasket and/or larger port cylinder heads. Runner size is effective for 468 to 540 cid engines. This manifold is in a satin finish.  Use an 800 cfm or larger 4150 square bore carburetor.

    Spec Sheet (PDF)

  • Weiand 7136P 1955-1986 S/B Chevy Blower Intake Manifold, Polished
    Weiand 7136P 1955-1986 S/B Chevy Blower Intake Manifold, Polished
    SKU-8057136P
    x
                If you already have a blower and drive, we offer just the intake. Adapt 6-71 superchargers to Small Block Chevy. Cast aluminum, they feature an integral pop-off valve and utilize stock-type thermostats and housings.
            
  • Professional Products Crosswind Oldsmobile 400/425-455 Intake Manifold
    Professional Products Crosswind Oldsmobile 400/425-455 Intake Manifold
    SKU-91011259
    x
                Finally a killer street intake for you Olds guys. This aluminum dual plane intake features an air gap under the plenum to help keep the air cooler, which makes more power. It has a square-bore carb pad which allows you to run the popular 4-bbl carbs. Can be drilled and tapped for nitrous. 1500-6500 rpm.

    910-11259 Instructions (PDF) 

    910-11270 Dyno (PDF) 

  • Garage Sale - Offenhauser Big Block Chrysler Dominator Intake Top Only
    Garage Sale
    Garage Sale - Offenhauser Big Block Chrysler Dominator Intake Top Only
    SKU-5605956
    x
                

    It's possible to mount the big Holley 4500 on a number of Offenhauser manifolds with a special adapter. However, 360 Degree Equa-Flow Single Quad 4500 High-Rise intake manifolds are designed from the beginning specifically to fit the Dominator. The single plane design, split plenum, and tuned intake runners combine to produce a broad power band that runs from 3,400 rpm up to 8,900 rpm.

     

    This intake is garage sale priced because it is new old stock, these are still packed in early 1970's newspaper.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

     

  • Edelbrock 2703 Performer EPS Chevy Intake Manifold with Oil Fill
    Edelbrock 2703 Performer EPS Chevy Intake Manifold with Oil Fill
    SKU-3252703
    x
                

    Designed for 1986 and earlier 262-400 cubic-inch Chevys, the Performer EPS dual-plane manifold is optimized to deliver superior performance over other low-rise dual plane manifolds. This small-block Chevy manifold has a runner design that's "tuned" for peak torque around 3500 rpm on a 350-inch engine and it produces power from off-idle to 5500 rpm.

    Dyno tests showed gains of 5 hp and 9 ft/lbs of torque over the standard Performer manifold on a 350 Chevy. From 3000 to 4500 rpm, the increases averaged 5+ ft/lbs. of torque for more performance where you need it most.

    325-2703 Instructions (PDF)

  • Offenhauser 1090 1932-1948 Ford Flathead Regular Dual Intake Manifold
    Offenhauser 1090 1932-1948 Ford Flathead Regular Dual Intake Manifold
    SKU-5601090
    x
                

    Said to be its most popular flathead intake, Offenhauser’s 2x2 Regular intake has closely spaced carbs that will clear the stock generator. The Offy regular dual intake accepts two 3-bolt carbs. Great addition to a street oriented engine. Has 4-3/4" carb centers.

    Has room for generator in stock location, but generally requires an offset bracket. If using a GM alternator, use our chrome 916-67909 or plain 916-67910 bracket.

    • Carb Centers:  4-3/4"
    • For 1932-48 Ford Flatheads
    • Front drivers side accessory hole is for draft tube and measures 1.25"
    • Rear drivers side accessory hole is for oil fill tube and measures 1.375"

     

  • Garage Sale - Offenhauser Mopar 440 Single Quad Intake Manifold
    Garage Sale
    Garage Sale - Offenhauser Mopar 440 Single Quad Intake Manifold
    SKU-5605763
    x
                

    This intake is garage sale priced because it is new old stock.  This one is still packed with early 1970s newspaper.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

     

  • Offenhauser 5415 1963-75 Chevy 6-Cylinder Dual Carb Intake Manifold
    Offenhauser 5415 1963-75 Chevy 6-Cylinder Dual Carb Intake Manifold
    SKU-5605415
    x
                

    Offenhauser Dual Carburetor Chevy 194, 230, 250 and 292 intake allow you to run a Big 6 without the hassles and cost of the GMC. Manifold provides a nostalgic appearance while equalizing fuel distribution to all cylinders, improving both performance and economy. With this lightweight cast aluminum manifold, your inline six will be more responsive across the RPM range.

    Accepts two OEM (Rochester B or BC) 1-barrel carbs like the original on your 1963-1975 straight 6. Manifold comes with a non-progressive linkage kit.

  • Edelbrock 2913 Super Victor Intake Small Block Chevy Vortec
    Edelbrock 2913 Super Victor Intake Small Block Chevy Vortec
    SKU-3252913
    x
                

    Designed for small-block Chevys with 4150 Series carburetors and Vortec cylinder heads. They have a large runner cross-sectional area (3.2 square inches) and highly efficient cloverleaf plenum design. In dyno tests on a 358-inch small-block, it made 10 horsepower more than the best competitor's manifold!

    Recommended Intake Gasket:  GM #89017465

  • Edelbrock 7110 S/B Chevy Street Tunnel Ram Intake Manifold
    Edelbrock 7110 S/B Chevy Street Tunnel Ram Intake Manifold
    SKU-3257110
    x
                

    Edelbrock's Street Tunnel Ram is designed for 302-327-350-400 c.i.d. small-block Chevy V8s operating below 7500 rpm where low-end torque is not a prime factor. Great for engines with slightly modified or aftermarket cylinder heads. Applicable to street machines, street rods, pro street and marine. Optimum power range of 3500-7500 rpm.

    Will NOT work with 1987-up cast iron heads or HEI distributors. See Notes tab for important install notes.

    325-7110 Instructions (PDF)

  • Edelbrock 2601 Performer Air-Gap Intake Manifold, 1955-86 S/B Chevy
    Edelbrock 2601 Performer Air-Gap Intake Manifold, 1955-86 S/B Chevy
    SKU-3252601
    x
                

    This award-winning design incorporates the same race-winning technology that's been used on our Victor Series competition intakes for years. Designed for 1955-86 262-400 c.i.d. small-block Chevys, the Performer Air-Gap features the air-gap design for the ultimate street performance.  These new Performer Air-Gap manifolds are ideal for street performance from idle-to-5500 rpm.

    The open air-gap separates the runners from the hot lifter-valley cover, resulting in a cooler, denser charge, meaning more power and better throttle response throughout the power band.

    • Chevrolet 262-400 Small-Block V8
    • Dual plane design
    • Idle - 5500 RPM
    • Ideal choice for street rods and street machines
    • No provision for exhaust heated chokes or exhaust crossover
    • Fits spread-bore or square-bore carburetors
    • Will not fit under stock Corvette hood
    • Available with standard finish

    325-2601 Instructions (PDF)

  • Edelbrock 71014 Performer RPM Endurashine Intake Manifold, S/B Chevy
    Edelbrock 71014 Performer RPM Endurashine Intake Manifold, S/B Chevy
    SKU-32571014
    x
                Please view the product's page for more information
            
  • Garage Sale - Power+Plus Typhoon Small Block Chevy 1957-95 Intake Manifold, Black Chrome
    Garage Sale
    Garage Sale - Power+Plus Typhoon Small Block Chevy 1957-95 Intake Manifold, Black Chrome
    SKU-91011265.GS
    x
                Please view the product's page for more information
            
  • Edelbrock 2121 Small Block Ford 289 Intake Manifold w/o EGR
    Edelbrock 2121 Small Block Ford 289 Intake Manifold w/o EGR
    SKU-3252121
    x
                
    • Popular choice for many applications
    • Great for street and off road
    • provides overall performance improvements in idle to 5500 rpm
    • Non-EGR
  • Professional Products Cyclone Big Block Chevy 396-454 Intake Manifold
    Professional Products Cyclone Big Block Chevy 396-454 Intake Manifold
    SKU-91011270
    x
                The Power+Plus Cyclone Manifold is a direct replacement manifold for the stock manifold on Chevy big block engines with general duty oval port heads. This dual plane intake will accept either a Quadra-Jet or square flange carb (with supplied adapter plate). Also features nitrous bosses cast in for use with direct port systems. RPM range is idle to 6000.  Available plain, polished or chrome. This product comes with the adapter/cover plate for the OEM choke assembly to bolt to.  It also has the adapter/cover plate gasket and two allen head chrome cap screws for attachment.

    910-11270 Instructions (PDF) 

  • Garage Sale - Power Plus B/B Chevy Intake Manifold
    Garage Sale
    Garage Sale - Power Plus B/B Chevy Intake Manifold
    SKU-UP26477
    x
                The Power+Plus Cyclone Manifold is a direct replacement manifold for the stock manifold on Chevy big block engines with general duty oval port heads. This dual plane intake will accept either a Quadra-Jet or square flange carb (with supplied adapter plate). Also features nitrous bosses cast in for use with direct port systems. RPM range is idle to 6000.  Available plain.

    Instructions (PDF) 

     

    This is garage sale priced because it is missing the gaskets and spacers.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

  • Offenhauser 1079 1932-1948 Ford Flathead 4-Barrel Intake Manifold
    Offenhauser 1079 1932-1948 Ford Flathead 4-Barrel Intake Manifold
    SKU-5601079
    x
                

    This Offy single 4-barrel intake fits the 1932-48 Ford V-8 and features a Carter WCFB bolt pattern. For best results, our techs recommend the Holley 390 CFM 4-BBL which requires the Holley Flathead adapter 135-1935B.

    You may also need to purchase 560-6091, 4" tall carb spacer (in addition to 135-1935B) to use a Holley carb on this intake. The spacer gets the carb high enough so that the base will clear the water hoses.

    • For 1932-48 Ford Flathead, 4-barrel carbs 
    • Requires Holley carb, adaptor, and spacer for best results
  • Professional 326-455 Pontiac V8 Plain Intake Manifold 2200-6500 RPM
    Professional 326-455 Pontiac V8 Plain Intake Manifold 2200-6500 RPM
    SKU-91011258
    x
                This single plane intake fits 326-455 Pontiac V8's and was designed to fit under the hood of stock applications. Accepts either Quadrejet or Holley carbs. No heat crossover but can be drilled for nitrous. Plain or polished.  RPM range is 2200-6500.

    910-11258 Instructions (PDF) 

    General Intake Manifold Instructions (PDF) 

  • Power+Plus Typhoon Small Block Chevy 1957-95 Intake Manifold
    Power+Plus Typhoon Small Block Chevy 1957-95 Intake Manifold
    SKU-91011265
    x
                

    If you are running a little more motor, then this is the intake for you! The Professional Products Typhoon manifold is a high performance dual plane, 180° street manifold designed to be used with Holley, Carter AFB, or Edelbrock square flange carbs. For 1957-86 S/B Chevy and will fit 1987-95 heads with supplied adapters.

    • RPM range is 1500-6500
    • Available plain or show polished
    • Power comparable to single plane manifolds yet retains throttle response/driveability of a dual plane
    • Cast-in nitrous bosses
    • Water outlets at all four corners
    • Dual distributor hold-downs
    • Provisions to add an oil fill tube
    • Accepts late model waterneck, A/C, alternator, and HEI

    910-11265 Dyno Sheet (PDF)

    910-11265 Instructions (PDF) 

  • Edelbrock 75214 S/B Ford 289-302 Performer RPM Air-Gap Intake Manifold
    Edelbrock 75214 S/B Ford 289-302 Performer RPM Air-Gap Intake Manifold
    SKU-32575214
    x
                

    Designed for street 289-302 c.i.d. Ford V8s, the RPM Air-Gap incorporates the same race-winning technology that's been used on Victor Series competition intakes for years. The air-gap design features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power.

    • 1500-6500 RPM power band 
    • Includes nitrous bosses
    • No provision for exhaust heated chokes and no exhaust crossover
    • Aftermarket 4-bbl carbs are not compatible with AOD trans unless used with Lokar bracket SRK-4000

    325-75214 Instructions (PDF)

    Edelbrock Rebate May-June (PDF)

  • Kinsler Fuel Injection TP000130 Tough Pump 3-Port Fuel Manifold
    Kinsler Fuel Injection TP000130 Tough Pump 3-Port Fuel Manifold
    SKU-473130
    x
                

    This 3-port fuel manifold has one -8 AN port in the center, two -6 AN ports on each side, and a -3 AN pressure port. For use with Kinsler Tough Pump fuel pump.

    Manifold only, fittings not included. 

  • Edelbrock 5420 396-454 Chevy Dual Quad Intake Manifold, Oval Port
    Edelbrock 5420 396-454 Chevy Dual Quad Intake Manifold, Oval Port
    SKU-3255420
    x
                

    Designed for 1975 & earlier 396-454 c.i.d. big block Chevy with oval port heads. Has an optimum power range of 1500-6000 rpm. Edelbrock testing has confirmed smooth, consistent part-throttle operation with a 25 hp gain over single 4BBL low-rise single plane intakes and a torque gain of 30 ft/lbs. over single 4BBL low-rise dual plane intakes.

    • Carb center to carb center is 6-7/16"
    • Will NOT fit tall-deck truck blocks
    • Carburetor Recommendation: Performer Series, 600 cfm

    325-5420 Instructions (PDF)

  • Offenhauser 5414 1963-75 Chevy 6-Cylinder Triple Carb Intake Manifold
    Offenhauser 5414 1963-75 Chevy 6-Cylinder Triple Carb Intake Manifold
    SKU-5605414
    x
                

    Offenhauser Triple Carburetor Chevy 194, 230, 250 and 292 intakes allow you to run a Big 6 without the hassles and cost of the GMC. Manifold provides a nostalgic appearance while equalizing fuel distribution to all cylinders, improving both performance and economy. With this lightweight cast aluminum manifold, your inline six will be more responsive across the RPM range.

    Accepts three OEM (Rochester B or BC) 1-barrel carbs like the original on your 1963-1975 straight 6. Includes a "progressive" linkage kit and various tubing & fittings for plumbing fuel lines.

  • Professional Products PowerPlus Crosswind Ford 289-302 Intake Manifold
    Professional Products PowerPlus Crosswind Ford 289-302 Intake Manifold
    SKU-91011240
    x
                

    If you are running a maximum effort 260-289-302 S/B Ford V8, then this is the intake for you! Professional Products' Cross Wind design incorporates an open area under the plenum to allow a full flow of cool air to pass through. This is similar to features found on single plane racing manifolds and this design can provide more power and torque due to a cooler, more dense intake charge. This dual plane, 180° performance manifold is designed to be used with Holley, Carter AFB, or Edelbrock square flange carbs.

    • RPM range is 1500-6500 
    • Power comparable to single plane manifolds yet retains throttle response/driveability of a dual plane
    • Cast-in nitrous bosses
    • 1/2" NPT water outlets at all four corners
    • Dual distributor hold-downs 
    • Available plain or show polished

    910-11240 Instructions (PDF) 

  • Garage Sale - Edlebrock Performer RPM Chevy 348-409 Intake Manifolds
    Garage Sale
    Garage Sale - Edlebrock Performer RPM Chevy 348-409 Intake Manifolds
    SKU-UP19730
    x
                

    The Performer RPM W-Series intake manifolds are designed to fit 1958-1965 Chevrolet 348/409 "W-Series" big-block engines. They both deliver improved performance in the mid to high rpm range (1500-6500 rpm) when combined with an Edelbrock Performer carburetor. Also feature a front mounted oil fill tube for those who want the nostalgic look of Edelbrock's Classic series valve covers with no breathers.

     

    This item is garage sale priced because it is missing the oil fill tube and cap.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

  • Garage Sale - Edelbrock 27014 Performer EPS Chevy Intake Manifold-Endurashine Finish
    Garage Sale
    Garage Sale - Edelbrock 27014 Performer EPS Chevy Intake Manifold-Endurashine Finish
    SKU-UP48572
    x
                Please view the product's page for more information
            
  • Offenhauser 1177 1937-52 Chevy 6-Cylinder Triple Carb Intake Manifold
    Offenhauser 1177 1937-52 Chevy 6-Cylinder Triple Carb Intake Manifold
    SKU-5601177
    x
                

    Offenhauser Triple Carb intake manifolds provide a nostalgic appearance while equalizing fuel distribution to all cylinders, improving both performance and economy. With this lightweight cast aluminum manifold, your old "Stovebolt" will be more responsive across the RPM range. Use with two carburetors (2-5/8" bolt centers) typical of 1937-52 Chevys.

    • Fits 235 Chevy 6-cylinders
    • 1937-52 engines w/ Manual Transmission

     

    Included linkage kit is "non-progressive," meaning all three carbs operate at the same time.

  • Weiand 7136WIN 1955-1986 Small Block Chevy Blower Intake Manifolds
    Weiand 7136WIN 1955-1986 Small Block Chevy Blower Intake Manifolds
    SKU-8057136
    x
                

    If you already have a blower and drive, we offer just the intake. Adapt 6-71 superchargers to Small Block Chevy. Cast aluminum, they feature an integral pop-off valve and utilize stock-type thermostats and housings.

Goto Previous PagePrevious Page
1 2 3 4