Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Ignitions At Speedway Motors

Whether you're racing on the weekend or just cruising the streets, we have the ignition parts to spark your car to life. Speedway Motors carries the best in performance electronic distributors, spark plug wires, ignition boxes, coils, and spark plugs to power whatever you're driving. Ignite your passion with parts from top brands like MSD, Accel and Taylor Cable, all just a call or click away.

Featured Products
PerTronix D100701 Chevy Flame-Thrower Distributor
PerTronix D100701 Chevy Flame-Thrower Distributor
(Part #44710070)
x
            

Replace your outdated points, electronic distributor or bulky HEI with this performance proven system. Simply install the distributor in the engine, connect two wires and start it up! Features the reliable and accurate Ignitor II pickup module for maximum performance in a compact package. Compatible with most most CD ignition systems (MSD 6-Series, etc.).

Fits S/B and B/B Chevy V8. For even more performance, consider adding a Flame-Thrower coil for increased spark energy and higher RPM potential. Distributor cannot be used with solid core (wire core) ignition wires.

  • CNC machined 6061-T6 billet aluminum housings offer maximum strength
  • Housing is hand polished and buffed to a high luster
  • Tempered distributor shaft for accurate timing and extended operational life
  • Upper ball bearing and extra long oil impregnated bronze lower bushing provide high RPM stability
  • Ignitor II module with adaptive dwell maintains peak energy throughout the RPM range
  • Cobalt magnets and Hall Effect trigger for stable timing and precise spark distribution
  • Adjustable mechanical advance with proprietary limiting function permits multiple settings
  • Factory set with a performance advance curve
  • Additional springs for custom advance curves are provided
  • High dielectric strength cap and rotor with brass terminals and contact

447-10070 Instructions (PDF)

Chevy Blueprinted HEI Distributor
$69.99
$99.99
Product Rating: 4.94 Stars
Chevy Blueprinted HEI Distributor
(Part #91012342)
x
            

This HEI distributor for S/B and B/B Chevy non-computer controlled engines features a...

  • 4-pin ignition module rated to 7500 rpm
  • Premium cap with brass terminals
  • High output coil (50,000 volt spark through 7,500 rpm) 
  • 4340 chromoly steel bottom gear, for use with cast and steel billet cams 
  • Mechanical advance
  • Adjustable vacuum advance to improve economy while cruising
  • High performance rotor
  • Coil cover
  • Fully CNC machined, polished housing
  • True spark alignment for instant response at high RPM
  • Performance style advance curve built in

910-12342 Instructions (PDF)

MSD 8365 Pro-Billet Chevy HEI Distributor
$369.99
$388.99
Product Rating: 4.00 Stars
MSD 8365 Pro-Billet Chevy HEI Distributor
(Part #5478365)
x
            

The Chevrolet HEI Distributor is a favorite for muscle cars, street rods and even circle track racers. The integrated coil keeps underhood wiring clean, and for race cars, the idea of running one wire to the distributor keeps things simple. However, when it comes to performance, the stock HEI falls short. The MSD Pro-Billet HEI picks up where a stock HEI falls short with a digital module and high output coil, so there is plenty of spark energy combined with improved dwell and timing control. Ready to install in your engine!

  • Easy-to-adjust mechanical advance with supplied springs and stop bushings
  • Vacuum advance canister for improved economy (can be locked out)
  • CNC machined billet aluminum housing and billet aluminum base
  • Polished steel shaft is QPQ coated and guided by a sealed ball bearing
  • Advance plate and weights are fine blanked from chromoly steel and QPQ coated for friction reduction
  • Mechanical advance assembly can easily be locked out
  • Advance weight pins are staked and tig welded to the plate
  • Nylon pads ensure smooth operation of the advance weights
  • Special oil tract improves lubrication to the distributor and cam gear
  • Supplied with a 7.5 amp, single spark, inductive discharge ignition module
  • Epoxy filled 42,000 Volt coil with .31 OHMs resistance
  • Full spark energy output to 9,000 RPM
  • Supplied with brass terminal distributor cap and rotor
  • Iron distributor gear
  • Includes three sets of springs and four stop bushings
  • Dial in up to 24 different timing curves to match your driving needs

547-8365 Instructions (PDF)

MSD Rebate (Link)

 

MSD 35599 8.5mm Spark Plug Wires Set, S/B Chevy HEI, Under Headers
MSD 35599 8.5mm Spark Plug Wires Set, S/B Chevy HEI, Under Headers
(Part #54735599)
x
            

What makes or breaks a plug wire is not only how well the wire is insulated, but how low of resistance the center core has. These assembled wire sets test 40-50 ohms per foot, while most others test 1500 ohms per foot.

These low resistance spark plug wires are designed for Small Block Chevys with HEI and are routed under the headers. 

Learn how to properly attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.

MSD Rebate (Link)

MSD 8728 Soft Touch Rev Limiter Control for HEI
MSD 8728 Soft Touch Rev Limiter Control for HEI
(Part #5478728)
x
            

The Soft Touch Rev Control, PN 8728, is designed to be used on standard points ignition or inductive ignition systems. This means that the PN 8728 can be installed on engines with a GM HEI Ignition, Ford or Chrysler electronic ignition, any standard breaker points systems or even with an MSD 5 or Blaster Ignition (non-CD ignitions). The RPM Limiter is adjusted with plug-in modules and is supplied with 6,000, 7,000 and 8,000 rpm modules. When the engine reaches your set rpm, the Soft Touch circuitry kicks in and drops the spark to certain cylinders. This rpm limiter produces very accurate and smooth, backfire-free rev limits.

  • Can be used on 4, 6 or 8-cylinder engines with inductive ignitions
  • Adjusted with plug-in modules
  • Includes 6,000, 7,000 and 8,000 rpm modules
  • No MSD ignition control box required

547-8728 Instructions (PDF)

MSD Rebate (Link)


1932-48 Ford Flathead 3 Bolt Electronic Distributor
1932-48 Ford Flathead 3 Bolt Electronic Distributor
(Part #9108353)
x
            Speedway Motors offers this billet aluminum electronic distributor for the fabulous '32-'41 Flathead Ford V8 with the 3-bolt mount. This distributor is a "ready-to-run" unit that does not require a control box. 

We suggest a 12v coil 447-45001 (chrome) or 447-45011 (black) to be used with this distributor. We also suggest our spark plug wire set 910-64200.

910-8353 Instructions (PDF)

Performance Distributors S127212 Stealth Race Chevy HEI Distributor
Performance Distributors S127212 Stealth Race Chevy HEI Distributor
(Part #91012001)
x
            

The Stock Appearing "Stealth" version is available for those who want a totally OEM looking distributor. The Stealth version has all of the same features of the regular Racing D.U.I. except  that it is built with a black distributor cap, unpolished housing and no decals for that "bone stock"
HEI look. Has 100% new components.

  • Fits SB & BB Chevrolet
  • Capable of turning 9000 RPM
  • No external spark boxes or coils are needed
  • Easy drop-in installation with a one wire hookup
  • Sends 2-3 times more spark into the combustion chamber than a magneto
MSD 6425 6AL Digital Ignition Control Box
MSD 6425 6AL Digital Ignition Control Box
(Part #5476425)
x
            

The MSD Digital 6AL features a higher output with 530 primary volts and 135mJ of spark energy. Efficient components use less current to produce more power. Set an rpm limit on the MSD 6AL rev limiter with two rotary dials. Has the same bolt pattern as the original 6AL, but with a lower profile housing. Built-in LED for system checks. All wires exit the same side through a locked, sealed connector. Compatible with 4, 6 and 8-cylinder engines.

547-6425 Instructions (PDF) 

MSD Tech Bulletin

Learn more about the benefits and features of the MSD 6AL Digital Ignition Control Box by reading StangTV's tech article.  MSD's Newest 6AL Takes Conventional Ignitions into the Digital Age.

Learn more about determining the proper MSD ignition control box for your application by reading our tech article. The Differences Between 6 Series MSD Ignition Control Units.

MSD Rebate (Link)

"Ignition" Page 1 of 25

  • MSD 29711 Atomic LS Coil Covers - LS1, LS6, Black
    New
    MSD 29711 Atomic LS Coil Covers - LS1, LS6, Black
    (Part #54729711)
    x
                

     If you desire a clean and customized look to your engine compartment, our new Atomic LS coil covers are designed to fit over the valve covers and coil assemblies to effectively hide the coil packs and wiring. The cast aluminum covers align with the Atomic Smart Fuel Rail assemblies and provide a completely smooth contoured finish to the edge of the valve cover. The Atomic Coil Covers will work with OEM coils as well as MSD's Multiple Sparking Coils.

    • Fits over valve covers and coil assemblies
    • Smooth Contoured Finish
    • Works with OEM coils and MSD's Multiple Sparking Coils
    • Sold Individually
    • LS1, LS6

    Installation Instructions (PDF) 

  • Accel 8023 8.8 Spiral Core Spark Plug Wires, HEI, Straight Boot
    Accel 8023 8.8 Spiral Core Spark Plug Wires, HEI, Straight Boot
    (Part #1058023)
    x
                

    Makes power, not static.  With today's mega-watt, ultra-sensitive car stereo systems, that means "hiss-free" high fidelity. Thanks to a special graphite-impregnated fiberglass conductor, ACCEL 8.8 wire has the structural integrity to handle the high performance that can cause other wires to self-destruct.  Yellow only.

    • Rated to 550 degrees F
    • 8.8mm yellow high temp silicone jacket
    • For race and street applications
    • 500 ohm/ft. RFI suppression
    • Red plug boots

    Learn how to properly attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.

  • MSD 31889 Red Super Conductor Ford 4.6L, 5.4L, Universal
    New
    MSD 31889 Red Super Conductor Ford 4.6L, 5.4L, Universal
    (Part #54731889)
    x
                The MSD 8.5mm Super Conductor Wire is "the" performance wire.Engineered from the inside out, the 8.5 offers everything you have everwanted in a wire; incredibly low resistance without electronic interference! In a single 12 inch length of Super Conductor Wire there is only 40 - 50 ohms of resistance! That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it's great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference (EMI) "choke". This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. The MSD 8.5mm Super Conductor Plug Wire is available in Universal Kits and Bulk Lengths.

    Installation Instructions (PDF)

    • 40-50 Ohms per foot of resistance!
  • MSD 8732 2-Step Rev Control for Digital 6AL
    New
    MSD 8732 2-Step Rev Control for Digital 6AL
    (Part #5478732)
    x
                Since the new Digital 6AL Ignition uses rotary dials to adjust the rev limiter, our engineers were tasked with developing a 2-Step Rev Control that could be added to give racers the ability to switch to a low rpm limit to use on the starting line.    The new 2-Step is also digitally controlled and connects to the Digital 6ALs gray tach output wire. There are two easy to read rotary dials that let you set the launch rpm in 100 rpm increments. There is an activation wire that connects to the transbrake, a clutch switch or to the line-lock to activate the low rpm limit. When that switch is released, the low rpm limit is turned off and the car launches hard!

    Installation Instructions (PDF)

    • For use with Digital 6AL PN 6425 only
  • MSD 32939 Super Conductor Plug Wires, 98-01 Ford ZX-2, 2.0L, 4 cyl
    New
    MSD 32939 Super Conductor Plug Wires, 98-01 Ford ZX-2, 2.0L, 4 cyl
    (Part #54732939)
    x
                Please view the product's page for more information
            
  • MSD 8248 Blaster Coil 5.0L Coyote
    New
    MSD 8248 Blaster Coil 5.0L Coyote
    (Part #5478248)
    x
                The all new Ford 5.0L Coyote engine is hot, but MSD now offers a coil that will make it even hotter! MSD developed a replacement coil that incorporates improved windings and material to increase the output of the coil. Also, when other modifications are being added, you can rely on the Blaster Coil to recover quicker through high rpm with a powerful spark to promote combustion.
    • Improved high rpm operation
    • Patented winding design and materials
    • Direct bolt-in to factory connectors
    • 3.33402777777778
    • .51 ohms
    • Intnal Diode
    • 1.9 mH
    • 100 mA
    • 120 us
    • 48 mj
    • 32KV
  • MSD 32709 Super Conductor Plug Wires, Diamante, GT3000 Turbo V6 92-96
    New
    MSD 32709 Super Conductor Plug Wires, Diamante, GT3000 Turbo V6 92-96
    (Part #54732709)
    x
                Please view the product's page for more information
            
  • MSD 5561 Street-Fire Wire Set Chevy 366-454 Socket
    New
    MSD 5561 Street-Fire Wire Set Chevy 366-454 Socket
    (Part #5475561)
    x
                The Street Fire Spark Plug Wires feature a low resistance conductor thats wrapped in a sleek and durable black sleeve. The terminals are covered in black boots that protect the conductor from engine heat to ensure spark delivery.
    • Helically wound conductor suppresses electro and radio noise
    • Kevlar core combination for great strength and durability
    • Heavy duty terminals for secure connection
    • 8mm silicone and synthetic jacket resists heat and abrasion
    • 500 Ohms per foot resistance for improved spark delivery and power
    • Silicone boots protect against high exhaust temps
  • PerTronix D7100801 Chevy Ignitor III Billet Distributor
    PerTronix D7100801 Chevy Ignitor III Billet Distributor
    (Part #44771801)
    x
                

    PerTronix Plug-n-Play Ignitor III Flame-Thrower billet distributors give you CD ignition box performance without the box! Ignitor III systems produce multiple sparks through the entire RPM range, but DO NOT require an external ignition "box." Plus, the Ignitor III module has an adaptive dwell feature which maintains peak energy throughout the entire RPM range.

    1. Does NOT have provisions for a vacuum advance. 
    2. Can be used with most ignition coils 0.6 Ohms or greater.
    3. For 12 volt negative ground systems. Requires 12-14 Volts.
    4. Must use suppression spiral core ignition wires (not solid core wires).
    5. NOT for use with CD or multiple spark systems.
    6. Lobe sensor design triggers off the point cam or reluctor and does not require a magnet sleeve.
    7. Not intended for marine use.

    Does NOT have a vacuum advance and comes with an iron distributor gear. Red, points-style socket cap. For S/B and B/B Chevy. 

    447-71801 Instructions (PDF)

  • MSD 8581 Ford 351C-460 Bronze Distributor Gear
    New
    MSD 8581 Ford 351C-460 Bronze Distributor Gear
    (Part #5478581)
    x
                MSD Bronze Distributor gears are machined from quality AMPCO 45 aluminum bronze containing 5% nickel. This special com­bination creates high-strength gear teeth that are less prone to wear even with high-volume oil pumps.

    Installation Instructions (PDF)

    • Increased outer hardened layer thickness (RC 55-60).
    • Micro polished surface for smooth contact.
    • Proprietary formulated ductile iron.
    • Melonite QPQ coated reduces friction and initial wear.
    • Interstitial carbide concentration improves wear resistance and
  • MSD 31223 Black Super Conductor 8 Cyl, 90 Deg Plug, 90 Deg Plug
    New
    MSD 31223 Black Super Conductor 8 Cyl, 90 Deg Plug, 90 Deg Plug
    (Part #54731223)
    x
                The MSD 8.5mm Super Conductor Wire is "the" performance wire.Engineered from the inside out, the 8.5 offers everything you have everwanted in a wire; incredibly low resistance without electronic interference! In a single 12 inch length of Super Conductor Wire there is only 40 - 50 ohms of resistance! That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it's great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference (EMI) "choke". This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. The MSD 8.5mm Super Conductor Plug Wire is available in Universal Kits and Bulk Lengths.

    Installation Instructions (PDF)

    • Champion 670 V59C 14mm Racing Spark Plug-.46 In Reach, 5/8 In Hex, Hot
      Champion 670 V59C 14mm Racing Spark Plug-.46 In Reach, 5/8 In Hex, Hot
      (Part #271V59C)
      x
                  

      Champion Racing Series plugs include all the features of their conventional plugs, but are built with extreme engine conditions and durability in mind.  For GM & Ford cast iron cylinder heads and some OE design aluminum heads. Will not fit GT40 heads.

      • Nickel Alloy Ground and Center Electrodes
      • Copper Core Center Electrode Allows for Increased Conductivity and Heat Control
      • Peanut Plug
      • 14mm, .460" reach, 5/8" hex
      • Projected Tip
      • Heat Range: Hot (59)

      Champion Spark Plug Guide (GIF)

      Champion Heat Range Guide (GIF)

      Champion Conversion Chart (GIF)

      Spark Plug Gapping Instructions (GIF)

      Autolite, Champion, NGK Cross Reference Chart (PDF)

    • DEi 010502 Protect-A-Boot Spark Plug Boot Heat Shield, Silver, 8 Pack
      DEi 010502 Protect-A-Boot Spark Plug Boot Heat Shield, Silver, 8 Pack
      (Part #35610502)
      x
                  

      Protect-A-Boots are made from a high temperature resistant glass fiber material and treated with a proprietary coating, Protect-A-Boots provide spark plug boot and wire protection from extreme under hood heat.

      • Double-wall construction for added durability
      • Helps prevent burn-through, hardening and cracking of boots
      • Installs in seconds
      • Universal-fits most straight or angled boots
      • Withstands 1200°F direct continuous heat
      • Non-flammable & protects against chemicals & resists water

      Protect-A-Boot Instructions (PDF)

      Exhaust Wrap Frequently Asked Questions (PDF)  

       

    • MSD 32279 Super Conductor Plug Wires Dodge, Chrys, Ply.,Mit. 2.0L DOHC
      New
      MSD 32279 Super Conductor Plug Wires Dodge, Chrys, Ply.,Mit. 2.0L DOHC
      (Part #54732279)
      x
                  The MSD 8.5mm Super Conductor Wire is "the" performance wire.Engineered from the inside out, the 8.5 offers everything you have everwanted in a wire; incredibly low resistance without electronic interference! In a single 12 inch length of Super Conductor Wire there is only 40 - 50 ohms of resistance! That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it's great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference (EMI) "choke". This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. The MSD 8.5mm Super Conductor Plug Wire is available in Universal Kits and Bulk Lengths.
      • MSD 34615 90deg. Spark Plug Terminals, 100 each
        New
        MSD 34615 90deg. Spark Plug Terminals, 100 each
        (Part #54734615)
        x
                    These spark plug terminals are what you need when you custom make your own sets. Available in 100 quanties.
                
      • MSD 8674 RPM Module Rev Limiter Selector Switch, 9000-11,200 RPM
        New
        MSD 8674 RPM Module Rev Limiter Selector Switch, 9000-11,200 RPM
        (Part #5478674)
        x
                    The RPM Module Selector plugs directly into the rpm module socket on all MSD Soft Touch Rev Controls and accessories that use plug-in mod­ules. The user can then select between twelve different rpm limits by simply turning the knob. Six models are available to cover a range from 3,000 rpm to 12,800 rpm in 200 rpm increments.

        Installation Instructions (PDF)

      • MSD 84049 Coil Wire for Blaster Coil, Socket Cap
        New
        MSD 84049 Coil Wire for Blaster Coil, Socket Cap
        (Part #54784049)
        x
                    Coil wire for use with Blaster Coil and Socket style cap.
                
      • MSD 5571 Street-Fire Wire Set Chev Pickup, BB EFI, 90-97
        New
        MSD 5571 Street-Fire Wire Set Chev Pickup, BB EFI, 90-97
        (Part #5475571)
        x
                    The Street Fire Spark Plug Wires feature a low resistance conductor thats wrapped in a sleek and durable black sleeve. The terminals are covered in black boots that protect the conductor from engine heat to ensure spark delivery.
        • Helically wound conductor suppresses electro and radio noise
        • Kevlar core combination for great strength and durability
        • Heavy duty terminals for secure connection
        • 8mm silicone and synthetic jacket resists heat and abrasion
        • 500 Ohms per foot resistance for improved spark delivery and power
        • Silicone boots protect against high exhaust temps
      • MSD 2970  Atomic LS Coil Covers LS2, LS3, LS7, Red
        New
        MSD 2970 Atomic LS Coil Covers LS2, LS3, LS7, Red
        (Part #5472970)
        x
                    

         If you desire a clean and customized look to your engine compartment, our new Atomic LS coil covers are designed to fit over the valve covers and coil assemblies to effectively hide the coil packs and wiring. The cast aluminum covers align with the Atomic Smart Fuel Rail assemblies and provide a completely smooth contoured finish to the edge of the valve cover. The Atomic Coil Covers will work with OEM coils as well as MSD's Multiple Sparking Coils.

        • Fits over valve covers and coil assemblies
        • Smooth Contoured Finish
        • Works with OEM coils and MSD's Multiple Sparking Coils
        • Sold Individually
        • LS2, LS3, LS7

        Installation Instructions (PDF) 

      • MSD 8545 Chrysler 383,400 Pro-Billet Distributor
        New
        MSD 8545 Chrysler 383,400 Pro-Billet Distributor
        (Part #5478545)
        x
                    Since many Chrysler enthusiasts use the B1 head or aftermarket valve cov­ers, these Pro-Billet Chrysler Distributors have been designed with a small diameter housing. This allows the distributors to fit tight block and head combinations.

        Installation Instructions (PDF)

        • Smaller diameter CNC machined billet aluminum housing and billet aluminum base clears aftermarket heads and valve covers
        • Easy-to-adjust mechanical advance with supplied springs and stop bushings
        • Maintenance-free magnetic pickup and precision reluctor create stable trigger signals throughout the rpm range
        • Polished steel shaft is QPQ coated and guided by two sealed ball bearings
        • Advance plate and weights are fine blanked from chrome moly steel and QPQ coated for friction reduction
        • Mechanical advance assembly can be locked out for crank trigger systems
        • Advance weight pins are staked and tig welded to the plate
        • Nylon pads ensure smooth operation of the advance weights
        • Supplied with small diameter cap with HEI style terminals and race rotor (will accept 8441 Cap-A-Dapt)
        • Must be used with an MSD Ignition Control
        • No CARB Exemption Order Number
      • MSD 82488 Blaster Coil 5.0L Coyote Set of 8
        New
        MSD 82488 Blaster Coil 5.0L Coyote Set of 8
        (Part #54782488)
        x
                    

        The all new Ford 5.0L Coyote engine is hot, but MSD now offers a coil that will make it even hotter! MSD developed a replacement coil that incorporates improved windings and material to increase the output of the coil. Also, when other modifications are being added, you can rely on the Blaster Coil to recover quicker through high rpm with a powerful spark to promote combustion.

        MSD Rebate -  October 1, 2014 - October 31, 2014

        • Improved high rpm operation
        • Patented winding design and materials
        • Direct bolt-in to factory connectors
        • 3.33402777777778
        • .51 ohms
        • Intnal Diode
        • 1.9 mH
        • 100 mA
        • 120 us
        • 48 mj
        • 32KV
      • Taylor Cable 76640 8mm Solid Core Wires, Under Headers, HEI, 90  , Blue
        Taylor Cable 76640 8mm Solid Core Wires, Under Headers, HEI, 90 , Blue
        (Part #69876640)
        x
                    

        Taylor Cable’s 8mm Spiro-Pro Series outperforms the competition in both looks and performance at a price you can afford. Spiro-Pro is simply a top of the line high performance 8mm ignition wire and is an excellent choice for race only applications with it's solid wire core.

        • High grade silicone over silicone resists temperatures up to 600°
        • Color coordinated silicone boots add a touch of class
        • HEI boots have "Professional Grips" for easy on/off installation
        • Double spring locking spark plug terminals provide a firm grip
        • Wire core for racing applications
        • Use with magnetos and point style ignition systems (non electronic)
        • Fully assembled
        • Coil wire is 35" long and requires final assembly
      • Moroso Spark Plug Wires, Over Valves, Socket Cap, Ready-To-Install
        Moroso Spark Plug Wires, Over Valves, Socket Cap, Ready-To-Install
        (Part #91064305)
        x
                    If you have ever tried to put plug wires together yourself, you know how fustrating it can be. These pre-assembled Moroso 8mm spiral core wires are fiberglass reinforced with a silicone outer layer. Wires have 90° boots on both ends. Available in red or black for small block Chevy.

        Note: Standard Cap = Socket-style Cap = Points-style Cap

      • Stallard Sprint Ignition Dash Panel
        $29.99
        $34.99
        Stallard Sprint Ignition Dash Panel
        (Part #9652119)
        x
                    

        This is an upper aluminum tray for mounting all engine ignition components and wiring. It has four quarter-turn fasteners that hold the tray above driver compartment in your Sprint racing chassis.

        • Aluminum Material
        • Natural Finish
        • Sold Individually
        • .80 lbs.
        • .05" material thickness

         

      • MSD 34033 Super Conductor Bulk Wire, Black 6Ft
        New
        MSD 34033 Super Conductor Bulk Wire, Black 6Ft
        (Part #54734033)
        x
                    Please view the product's page for more information
                
      • Shim-Dex Spark Plug Shims, 24 Pack, Close Clearance
        Shim-Dex Spark Plug Shims, 24 Pack, Close Clearance
        (Part #94051501)
        x
                    New close clearance shims, features a smaller  outside dimension for minimal seat surface. Perfect for All Pro style  heads due to the tight fit of the plug into the head. 

        These stackable spark plug shims rotate the ground of the spark plug at 30 degree intervals anywhere within 360 degrees so that you get the most out of your spark plugs without causing overheat and pre-ignition due to thread exposure.
        • Shim-Dex shims rotate the ground of the spark plug at 30 degree intervals anywhere within 360 degrees
        • You won't have to buy extra spark plugs to have them perfectly indexed
        • Shim-Dex shims are reusable many times over
        • Minimal or no thread exposure in the cylinder head that can overheat and cause pre-ignition
        • Shim-Dex shims are so thin they will not adjust the gap too far out of the combustion chamber and negatively affect performance
        • Pack includes 12 silver 60 degree shims and 12 black 90 degree shims
        • Works well with any V8 engine application
        Indexing Your Spark Plugs (PDF)
      • MSD ASY11549 RPM Pill Module, 8200 RPM
        MSD ASY11549 RPM Pill Module, 8200 RPM
        (Part #910128200)
        x
                    

        You can easily change the RPM limit on your MSD ignition box by switching RPM modules. These chips are for 8200 RPM limit applications.

        • ASY11549 - Single MSD 8200 RPM Module 
        • Easily change the RPM limit on your MSD ignition box

        MSD Rebate (Link)

         

      • MSD 31369 Super Conductor Plug Wires Chevy 454, 74-76 HEI
        New
        MSD 31369 Super Conductor Plug Wires Chevy 454, 74-76 HEI
        (Part #54731369)
        x
                    The MSD 8.5mm Super Conductor Wire is "the" performance wire.Engineered from the inside out, the 8.5 offers everything you have everwanted in a wire; incredibly low resistance without electronic interference! In a single 12 inch length of Super Conductor Wire there is only 40 - 50 ohms of resistance! That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it's great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference (EMI) "choke". This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. The MSD 8.5mm Super Conductor Plug Wire is available in Universal Kits and Bulk Lengths.

        Installation Instructions (PDF)

        • MSD 8431 Distributor Cap for PN 8570, 8545, 8546
          New
          MSD 8431 Distributor Cap for PN 8570, 8545, 8546
          (Part #5478431)
          x
                      MSD molds our most popular V8 distributor caps in-house. These caps are injection molded from DuPont® Rynite material and feature spark plug-style terminals. These terminals offer improved locking connections and the Rynite material is extremely strong wi
                  
        • Taylor Cable 70650 8mm Spark Plug Wires, 90 Deg Boot, Wire Core, Blue
          Taylor Cable 70650 8mm Spark Plug Wires, 90 Deg Boot, Wire Core, Blue
          (Part #69870650)
          x
                      Taylor 8mm Pro Wires are the ultimate in spark plug wires for serious racing machines. 
          • High grade silicone over silicone resists temperatures up to 600°
          • Color coordinated silicone boots add a touch of class
          • HEI boots have "Professional Grips" for easy on/off installation
          • Double spring locking spark plug terminals provide a firm grip
          • Wire core for racing applications
          • Universal fit for HEI and socket style caps 

          Recommended for use with Vertex Magnetos.

          8mm Pro Wire Application Chart (GIF)

          Learn how to properly attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.

        • MSD 88863 Harness, 6013 to Early Hemi 03-05
          New
          MSD 88863 Harness, 6013 to Early Hemi 03-05
          (Part #54788863)
          x
                      Chrysler used two different coil packs on the late model Hemi engines. For connections on a carbureted engine a Harness will be required. For EFI engines, the Harness and an Adapter will be required.
          • Use this harness to run a carbureted setup on an 03-05 Hemi
        • MSD 8889 Harness, MSD to 90-95 Dodge Ram 5.2, 5.9L
          New
          MSD 8889 Harness, MSD to 90-95 Dodge Ram 5.2, 5.9L
          (Part #5478889)
          x
                      The MSD-to-Dodge Coil Harness is designed to provide a splice-free and simple installation of an MSD Ignition Control to late model Dodge vehicles equipped with a coil

          Installation Instructions (PDF)

          • MSD 8950 RPM Activated Switch
            $92.99
            $119.99
            New
            MSD 8950 RPM Activated Switch
            (Part #5478950)
            x
                        These RPM-Activated Switches will perform a variety of different functions from turning on a bulb or solenoid to activating an MSD Timing Control at a desired rpm.The RPM-Activated Switch, PN 8950, has two activation wires; one to ground a circuit and the other to open a circuit. Simply plug in an rpm module and wire the Switch to the circuit you want to activate. When the engine rpm reaches that amount, the circuit is activated and will remain on until the rpm falls below that amount.The RPM Window Switch, PN 8956, has two rpm adjustments; one to activate a circuit, while the other deactivates the same circuit. This Switch will supply then remove ground to a circuit. This is a great feature to deactivate nitrous before the engines rev limit is reached. Both Switches can be used with stock inductive ignitions or an MSD Ignition and can handle up to 1.5 amps. No rpm modules are supplied so they must be ordered from the selection of Modules shown on page 124. For use on 4, 6, or 8-cylinder engines.

            Installation Instructions (PDF)

          • Taylor Cable 70250 8mm Spark Plug Wires, Wire Core, 90 Degree, Red
            Taylor Cable 70250 8mm Spark Plug Wires, Wire Core, 90 Degree, Red
            (Part #69870250)
            x
                        Taylor 8mm Pro Wires are the ultimate in spark plug wires for serious racing machines. 
            • High grade silicone over silicone resists temperatures up to 600°
            • Color coordinated silicone boots add a touch of class
            • HEI boots have "Professional Grips" for easy on/off installation
            • Double spring locking spark plug terminals provide a firm grip
            • Wire core for racing applications
            • Universal fit for HEI and socket style caps 

            Recommended for use with Vertex Magnetos.

            8mm Pro Wire Application Chart (GIF)

            Learn how to properly attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.

          • MSD 8110 Dist. Hold Down Clamp, Billet, Chevrolet
            MSD 8110 Dist. Hold Down Clamp, Billet, Chevrolet
            (Part #5478110)
            x
                        MSDs Billet Distributor Hold Down Clamps are strong enough to keep the timing locked in place whether you are using an MSD Billet Distributor or Pro Mag. The MSD Hold Down Clamp is CNC machined from steel and fits all MSD Pro-Billet Chevrolet distributors and the Pro Mags. Each clamp includes the mounting stud, lock washer and nut.

            Installation Instructions (PDF)

            • MSD 8456 Ford 5.0L Pro-Billet Distributor
              $269.99
              $390.99
              New
              MSD 8456 Ford 5.0L Pro-Billet Distributor
              (Part #5478456)
              x
                          Please view the product's page for more information
                      
            Goto Previous PagePrevious Page
            1 2 3 4 5 ... 25