Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Ignitions At Speedway Motors

Whether you're racing on the weekend or just cruising the streets, we have the ignition parts to spark your car to life. Speedway Motors carries the best in performance electronic distributors, spark plug wires, ignition boxes, coils, and spark plugs to power whatever you're driving. Ignite your passion with parts from top brands like MSD, Accel and Taylor Cable, all just a call or click away.

"Ignition, Ignition Coils" Page 1 of 2

  • PerTronix 45001 Flame-Thrower II Chrome Coil
    PerTronix 45001 Flame-Thrower II Chrome Coil
    x
                

    Flame-Thrower II coils feature a super low 0.6 Ohm primary resistance which make them the ideal coil for Ignitor II ignition systems, Flame-Thrower billet distributors, as well as many other high energy ignitions. Low resistance and improved turns ratio help to produce up to 45,000 volts. This higher voltage enables you to run larger spark plug gaps for added power and better fuel economy.

    These coils are also compatible with most capacitive discharge boxes.

  • HRP HRP0088F Coil Mount Bracket
    HRP HRP0088F Coil Mount Bracket
    x
                Eliminate stress to your dash by welding this bracket to your motor plate upright.  Slotted 3/8" coil mounting holes.
            
  • Pertronix 45011 Flame-Thrower II Ignition Coil, 6 Volt, 0.6 Ohm
    Pertronix 45011 Flame-Thrower II Ignition Coil, 6 Volt, 0.6 Ohm
    x
                The hotter the spark, the easier your engine will start, and this 45,000 volt coil is just the ticket to a quick start! Has 0.6 ohms of resistance. Black case for a stock look.

    6 volt coils can be used with 6 volt point systems. If used with 12 volt point systems, it should have a 1.00 OHM resistor added.
  • PerTronix 60115 Flame-Thrower HV Coil, 1.5 Ohm
    PerTronix 60115 Flame-Thrower HV Coil, 1.5 Ohm
    x
                

    These high voltage E-core design coils by PerTronix put out an incredible 60,000 volts and are encased in a 6063 T-5 aluminum heat sink.

    • 1.5 Ohm primary resistance
    • 60,000 volts
    • 50 state legal

     

  • PerTronix 60104 Flame-Thrower HV Coil, 0.45 Ohm
    PerTronix 60104 Flame-Thrower HV Coil, 0.45 Ohm
    x
                

    These high voltage E-core design coils by PerTronix put out an incredible 60,000 volts and are encased in a 6063 T-5 aluminum heat sink. These coils are 50 state legal and are available with different resistance values for your application. Flame-Thrower HV .046 ohm coils are also compatible with most capacitive discharge boxes.

    • 0.45 Ohm primary resistance
    • 60,000 volts
    • 50 state legal

     

  • Crane Cams 7300040 Fire Ball Performance Ignition Coil, Chrome
    Crane Cams 7300040 Fire Ball Performance Ignition Coil, Chrome
    x
                

    Great as a high output replacement for OE electronic ignition and points applications on vehicles that require a conventional round coil. For general purpose use in applications when engine RPM does not exceed 6500 RPM. Includes ballast resistor for points applications. Fits most OE brackets.

    • Primary Resistance:  1.4 ohms
    • Secondary Resistance:  5.2 kohms
    • Primary Inductance:  7.5 mH
    • Secondary Inductance:  26H
    • Leakage Inductance:  1.3 mH
    • Turns Ratio:  60:1

    Designed for use with XR-i Points Conversion Kits.

  • 1933-36 Ford Flathead Coil Adapter Kit
    1933-36 Ford Flathead Coil Adapter Kit
    x
                These kits allow you to replace the original distributor mounted coil with a modern coil on your 1933-36 Ford V8.. Includes adaptor plate, 6 volt condenser and coil wire.
            
  • PerTronix D3070 Flame-Thrower HEI Igniton Coil, Race Only
    PerTronix D3070 Flame-Thrower HEI Igniton Coil, Race Only
    x
                

    This ignition coil can be used as a replacement for the PerTronix Flame-Thrower HEI distributor 447-1071 or as a race only coil for your GM HEI distributor with an internal coil. When paired with matching module 447-2070, this coil will produce 42% more energy than a comparable street/strip coil with 46% faster spark breakdown time allowing 48% more peak current to reach the spark plug between 6000 and 8500 RPM.

    • 90:1 turn ratio
    • 0.35 Ohms primary resistance
    • 50,000 max voltage
    • Use with module 447-2070
  • J&J Auto Racing 101024C9 MSD Ignition And Coil Mount
    J&J Auto Racing 101024C9 MSD Ignition And Coil Mount
    x
                
    • Lightweight aluminum construction
    • Holds MSD spark box and Tel Tach
    • Quickly quarter turn fastener on and off dash
  • Chrome Coil Bracket and Cover
    Chrome Coil Bracket and Cover
    x
                These ignition coil brackets and covers fit over stock coils. Chrome.
            
  • Crane Cams 7300020 Fire Ball Performance Ignition Coil, Black
    Crane Cams 7300020 Fire Ball Performance Ignition Coil, Black
    x
                

    Great as a high output replacement for OE electronic ignition and points applications on vehicles that require a conventional round coil. For general purpose use in applications when engine RPM does not exceed 6500 RPM. Includes ballast resistor for points applications. Fits most OE brackets.

    • Primary Resistance:  1.4 ohms
    • Secondary Resistance:  5.2 kohms
    • Primary Inductance:  7.5 mH
    • Secondary Inductance:  26H
    • Leakage Inductance:  1.3 mH
    • Turns Ratio:  60:1

    Designed for use with XR-i Points Conversion Kits.

  • EMPI 16-7015 Billet Coil Clamp Mount
    EMPI 16-7015 Billet Coil Clamp Mount
    x
                

    Combine function and beauty with these custom machined and fully polished aluminum billet coil clamp bracket mounts.  These universal mounts include 1/4"-20" mounting bolts, clamps onto a coil with a 2-1/8" diameter and features a mount bolt center spacing of 3-1/2".

    • Polished billet aluminum
    • Secures and mounts coil to firewall or inner fender well
    • Clamps onto a 2-1/8" coil body diameter
    • 3-1/2" mount bolt center spacing
  • MSD 8250 Power-Core HVC Ignition Coil
    MSD 8250 Power-Core HVC Ignition Coil
    x
                

    The MSD HVC coil is designed exclusively for the HVC Professional Racing Ignition Control (#547-6600). The E-Core design of the HVC Coil is more efficient in producing more output with less loss.

    547-8250 Instructions (PDF)

    MSD Rebate (Link)

  • Crane Cams 730-0192 PS92N Fireball Race Coil
    Crane Cams 730-0192 PS92N Fireball Race Coil
    x
                

    Coil for use with CD systems only. Recommended for race applications and extended high RPM use. Includes lightweight black anodized aluminum bracket.

  • OTB Gear 6831 Finned Aluminum Coil Mount, Polished
    OTB Gear 6831 Finned Aluminum Coil Mount, Polished
    x
                

    Not only is this finned aluminum coil mount good looking, it actually has some worthwhile features too. Features a standoff mounting rib that allows you to easily clean the backside and the surface behind it. No inaccessible areas to drive you crazy. Mounted with 1/4"-20 drive studs (removable) that can't be mistakenly driven into the side wall of the coil. Cast in aircraft grade A356 aluminum and polished to a very high sheen.

    Made in USA.

  • MSD 8202 Blaster 2 Ignition Coil
    MSD 8202 Blaster 2 Ignition Coil
    x
                Please view the product's page for more information
            
  • MSD 8203 Blaster 2 Ignition Coil w/ Resistor
    MSD 8203 Blaster 2 Ignition Coil w/ Resistor
    x
                

    If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD ignition, the Blaster Coil line is the right choice. Special 100:1 windings, kept cool in an oil filled metal canister, are used to provide maximum build-up of voltage.  The tower assembly is molded of durable alkyd material due to its high dielectric characteristics while wide spaced brass primary terminals prevent the possibility of spark. Can be used with a stock ignition, Blaster Ignition, or MSD 5, 6 or 7 Ignition Control.

    The 0.8 ohm ballast resistor must be used with stock points ignition and Mallory Unilite applications. Includes MSD Power Tower top.

    • Improved output coil for stock points or electronic ignitions, Blaster Ignition, or MSD 5, 6, and 7 Series
    • Supplied with two plug wire boots, terminals, and jumper wire
    • 100:1 turns ratio and lower primary resistance produce high voltage output
    • MSD Red metal canister is filled with a premium grade oil for cooling

    MSD Blaster 2 Ignition Installation Instructions (PDF)

    MSD Rebate (Link)

     

  • MSD 84022 Extreme HEI Coil Cover
    MSD 84022 Extreme HEI Coil Cover
    x
                

    Replacement coil dust cover for MSD Extreme Output HEI Kit # 547-8502. Made from DuPont Rynite.

    MSD Rebate (Link)

     

  • OTB Gear 6832 Finned Aluminum Coil Mount, Plain
    OTB Gear 6832 Finned Aluminum Coil Mount, Plain
    x
                

    Not only is this finned aluminum coil mount good looking, it actually has some worthwhile features too. Features a standoff mounting rib that allows you to easily clean the backside and the surface behind it. No inaccessible areas to drive you crazy. Mounted with 1/4"-20 drive studs (removable) that can't be mistakenly driven into the side wall of the coil. Cast in aircraft grade A356 aluminum and polished to a very high sheen.

    Made in USA.

  • Speedway High Performance HEI Coil
    Speedway High Performance HEI Coil
    x
                Direct replacement for OE coil on your HEI distributor. Special low inductance, high temperature windings which charge the coil faster to give increased spark energy at high RPM.
            
  • MSD 8223 Blaster 3 Coils
    $49.99
    MSD 8223 Blaster 3 Coils
    x
                

    The Blaster 3 Coil features an extra tall tower design to improve the coil wire attachment and spark isolation. Supplied with a 90° terminal and boot.

    • Extra tall secondary tower for secure coil wire connection
    • Improved output coil for electronic ignitions, and MSD Ignitions (ballast resistor required for points)•  100:1 turns ratio and lower primary resistance produce high voltage output
    • MSD Red metal canister is filled with a premium grade oil for cooling
    • Supplied with a 90° spark plug style terminal and boot
    • CARB E.O. Approved

    547-3223 Instruction Sheet (pdf)

    MSD Rebate (Link)

  • MSD PRD10987 HEI Type Coil Cover
    MSD PRD10987 HEI Type Coil Cover
    x
                

    HEI Type Coil Cover.

    MSD Rebate (Link)

     

  • PerTronix 60130 Flame-Thrower HV Coil, 3.0 Ohm
    PerTronix 60130 Flame-Thrower HV Coil, 3.0 Ohm
    x
                

    These high voltage E-core design coils by Pertronix put out an incredible 60,000 volts and are encased in a 6063 T-5 aluminum heat sink. These coils are 50 state legal and are available with different resistance values for your application.

    • 3.0 Ohm primary resistance
    • 60,000 volts
    • 50 state legal

     

  • PerTronix 40001 Flame-Thrower Coil, Chrome
    PerTronix 40001 Flame-Thrower Coil, Chrome
    x
                

    The hotter the spark, the easier your engine will start, and this 40,000 volt coil is just the ticket to a quick start! Its higher voltage allows larger spark plug gaps for added power, smoother response and better fuel economy. These coils are internally resisted so they are compatible with many inductive ignition systems.  

    • Smooth chrome finish 
    • 40,000 volts
    • For use with 12 volt inductive ignition systems.
    • 1.5 Ohm primary resistance
    • Legal in all 50 states and Canada
  • MSD 8213 Coil Bracket
    $6.99
    MSD 8213 Coil Bracket
    x
                

    The MSD Coil Bracket offers easy, univer­sal mounting for standard size ignition coils up to 2-1/4" in diameter. The Bracket uses a bolt and nut combination instead of the easily stripped self-tapping screw common on other brand brackets.  Perfect for cannister type coils

    Adustable from 1-3/4" to 2-3/8" with slight bending of mounting tabs.

    MSD Rebate (Link)

  • MSD 8227 Blaster Coil - Ford
    $49.99
    MSD 8227 Blaster Coil - Ford
    x
                

    Top off your Ford or GM Ignition system with these great new replacement coils. The Blaster TFI and GM Coils have MSD performance in factory style housings!MSD designed these Coils by combining our Blaster Coil experience with E-core coil efficiency. Each coil has a unique turns ratio plus there is lower primary resistance than the stock coil. This all amounts to a bolt-in replacement coil that produces more output voltage. The Coils will work with stock ignition systems as well as MSD equipped cars and trucks.

    • Direct performance replacement for Ford TFI coil
    • 85:1 turns ratio and lower primary resistance produce high voltage output
    • Works with stock ignition as well as MSD Ignitions
    • CARB E.O. Approved

    547-8227 Instruction Sheet (pdf)

    MSD Rebate (Link)

     

  • MSD 8240 Midget Coil Pack
    $124.99
    MSD 8240 Midget Coil Pack
    x
                

    Four tower high output coil designed exclusively for the MSD Programmable Midget Ignition.

    • Designed to be used with the MSD Midget Ignition
    • 83:1 turns ratio and lower primary resistance produce high voltage output
    • Secondary towers designed for snap on spark plug terminals
    • Primary terminals require Ford style connector provided with Midget Ignition

    MSD Rebate (Link)

     

  • MSD 8261 HVC II Coil for 7 Series Ignitions
    MSD 8261 HVC II Coil for 7 Series Ignitions
    x
                

    The Pro Power HVC II Coil is completely built in-house at MSD so engineers have exclusive control over the performance and qual­ity. The coil utilizes an iron U-Core design with a segmented bobbin for improved voltage distribution. The bobbin is molded from Dupont Rynite FR946 material which has incredible dielectric capabilities at high temperatures. MSD also incorporated a cutting edge winding material that has an improved insulation and is also capable of enduring extreme volt­ages. Together, these materials create a durable coil with incredible voltage capabilities, lightning quick rise time and lengthy spark duration. The housing, also molded from Rynite material, features far spaced brass primary terminals and a well protected secondary tower for increased spark isolation. The housing is completely potted with an epoxy compound for vibration resistance and installs with sturdy vibration mounts.

    For use with MSD 7 and 8 Series Ignitions.

    Instruction Sheet for 547-8261 (PDF)

    MSD Rebate (Link)

  • MSD 8253 HVC II Coil for 6 Series Ignitions
    MSD 8253 HVC II Coil for 6 Series Ignitions
    x
                

    The latest coil to be built entirely in-house at MSD is designed to be used with MSD 6 Series Ignition Controls. This coil utilizes an iron U-Core design with a segmented bobbin for improved voltage distribution. The bobbin is molded from a special Dupont Rynite material and wound specifically to produce the most current possible with incredible voltage and lightning quick rise time. The blue housing is also molded from high dielectric Rynite material. The brass primary terminals are spaced far apart and the secondary tower is well protected for increased spark isolation. The housing is completely potted with an epoxy compound for vibration resistance and installs with sturdy vibration mounts.

    • Designed for high rpm, long duration applications using MSD 6 Series Ignitions
    • New U-core winding design produces more voltage and current
    • 100:1 turns ratio and lower primary resistance produce high voltage output
    • Windings are encased in fracture resistant compound for vibration resistance
    • Dupont Rynite housing with isolated tower and brass primary terminals
    • Supplied with rubber shock mounts

    547-8253 Instructions (PDF)

    MSD Rebate (Link)

  • Chrome Coil Mounting Bracket
    Chrome Coil Mounting Bracket
    x
                These chrome coil mounting brackets fit over stock coils. Adjustable from 2-1/8" to 2-5/16" with slight modification. 
            
  • PerTronix 40011 Flame-Thrower Coil, Black
    PerTronix 40011 Flame-Thrower Coil, Black
    x
                

    The hotter the spark, the easier your engine will start, and this 40,000 volt coil is just the ticket to a quick start! Its higher voltage allows larger spark plug gaps for added power, smoother response and better fuel economy. These coils are internally resisted so they are compatible with many inductive ignition systems.

    • 40,000 volts
    • Black finish for that "stock look"
    • For use with 12 volt inductive ignition systems
    • 1.5 Ohm primary resistance.
    • Legal in all 50 states and Canada

     

  • 1937-41 Ford Flathead Coil Adapter Kit
    1937-41 Ford Flathead Coil Adapter Kit
    x
                These kits allow you to replace the original distributor mounted coil with a modern coil on your 1937-41 Ford V8. Includes adaptor plate, 6 volt condenser and coil wire.
            
  • MSD 8226 Blaster Coil - GM
    $49.99
    MSD 8226 Blaster Coil - GM
    x
                

    Top off your GM Ignition system with these great new replacement coils. The GM Coils have MSD performance in factory style housings! MSD designed these Coils by combining our Blaster Coil experience with E-core coil efficiency. Each coil has a unique turns ratio plus there is lower primary resistance than the stock coil. This all amounts to a bolt-in replacement coil that produces more output voltage. The Coils will work with stock ignition systems as well as MSD equipped cars and trucks.

    • Direct performance replacement for GM dual connector coil
    • 85:1 turns ratio and lower primary resistance produce high voltage output
    • Works with stock ignition as well as MSD Ignitions
    • CARB E.O. Approved

    547-8226 Instruction Sheet (pdf)

    MSD Rebate (Link)

     

  • Accel 140003 GM High Energy HEI Super Coil, Red/Yellow
    Accel 140003 GM High Energy HEI Super Coil, Red/Yellow
    x
                Delivers more voltage for faster starting and more efficient combustion. Fits GM HEI '73-'91 vehicles. Features ultra-fine magnet wire, high strength case with cooling ribs, cap head through bolts and carbon brush spring and coil gasket. Street legal. 0.50 OHM. 
            
  • MSD 84039 Replacement Coil Wire
    MSD 84039 Replacement Coil Wire
    x
                

    Coil socket terminal and boot on one side with a HEI distributor cap socket terminal and boot on the other. 18" long.

    MSD Rebate (Link)

  • MSD 8200 Blaster 2 Coil - Chrome
    MSD 8200 Blaster 2 Coil - Chrome
    x
                

    If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD Blaster Ignition, MSD 5, 6 or 7, the Blaster Coil line is the right choice. All of the Blaster Coils are designed for improved spark output! Special 100:1 windings are used to provide maximum build-up of voltage! These windings are held secure and kept cool in an oil filled metal canister. The tower assembly is molded of durable alkyd material due to its high dielectric characteristics while wide spaced brass primary terminals prevent the possibility of spark. There are several versions of the Blaster Coil available. All of them have the same internal specifications, but have different housings or components. Each Blaster Coil can be used with a stock ignition, Blaster Ignition, MSD 5, 6 or 7 Ignition Control. Most late model vehicles with electronic ignitions do not require a ballast resistor, check your ignition and manufacturers specifications to determine if a ballast is required in your application.

    547-8200 Instruction Sheet (pdf)

    MSD Rebate (Link)

  • MSD 8225 HEI High Performance Direct Replacement Coil
    MSD 8225 HEI High Performance Direct Replacement Coil
    x
                

    HEI owners now have a choice to replace their stock coil with the MSD High Energy Unitized Coil for GM HEI Distributors. This coil is a direct re­placement of the stock coil. The coil features special low induc­tance, high temperature windings which charge faster to give you increased spark energy at higher rpm. The premium epoxy filled construction is designed to withstand harsh race applications as well as the wear and tear that daily usage dishes out, and still deliver more spark energy to the spark plugs.

    • Direct performance replacement for GM HEI coil-in-cap distributors
    • 70:1 turns ratio and lower primary resistance produce high voltage output
    • Full power sparks to 9,000 RPM when used with 8364 MSD HEI Module
    • Recommended for use with MSD HEI Module PN 8364

    MSD Rebate (Link)

  • MSD 8401 HEI Coil Conversion
    $32.99
    MSD 8401 HEI Coil Conversion
    x
                

    The modified HEI Dust Cover allows you to remove the stock HEI coil in your distributor cap, and replace it with an externally mounted coil such as the Blaster 2. Designed to be installed on stock HEI distributor caps with no modification.

    Instruction Sheet for 547-8401 (pdf)

    MSD Rebate (Link)

  • MSD 8222 Blaster 2 Coil - Black
    $46.99
    $47.99
    MSD 8222 Blaster 2 Coil - Black
    x
                

    In applications such as off-road, marine or other harsh conditions, the MSD Blaster High Vibration Coil is the best choice. The sturdy metal housing of the High Vibration Coil is completely pot­ted with a premium grade epoxy to completely encase the coil’s primary and secondary windings. This protects the coil’s internal components from high and low frequency vibrations that are commonly experienced in racing.

    • Metal canister is encased with epoxy to protect the windings from high vibration applications
    • Improved output coil for electronic ignitions, and MSD Ignitions (ballast resistor required for points)
    • 100:1 turns ratio and lower primary resistance produce high voltage output
    • CARB E.O. Approved

    547-8222 Instruction Sheet (pdf)

    MSD Rebate (Link)

  • Trans-Dapt 9366 Stand-Up Coil Brackets
    Trans-Dapt 9366 Stand-Up Coil Brackets
    x
                These stand-up coil brackets fit over stock coils. Chrome.
            
Goto Previous PagePrevious Page
1 2