Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Filter

Page 1 of 5

Products

Ignition Coils

Shop Ignitions At Speedway Motors

Whether you're racing on the weekend or just cruising the streets, we have the ignition parts to spark your car to life. Speedway Motors carries the best in performance electronic distributors, spark plug wires, ignition boxes, coils, and spark plugs to power whatever you're driving. Ignite your passion with parts from top brands like MSD, Accel and Taylor Cable, all just a call or click away.

Featured Products
  • PerTronix 40001 Flame-Thrower Coil, Chrome
    PerTronix 40001 Flame-Thrower Coil, Chrome
    (Part #44745001)
    x
                

    The hotter the spark, the easier your engine will start, and this 40,000 volt coil is just the ticket to a quick start! Its higher voltage allows larger spark plug gaps for added power, smoother response and better fuel economy. These coils are internally resisted so they are compatible with many inductive ignition systems.  

    • Smooth chrome finish 
    • 40,000 volts
    • For use with 12 volt inductive ignition systems.
    • 1.5 Ohm primary resistance
    • Legal in all 50 states and Canada
  • 1937-41 Ford Flathead Coil Adapter Kit
    1937-41 Ford Flathead Coil Adapter Kit
    (Part #91015242)
    x
                These kits allow you to replace the original distributor mounted coil with a modern coil on your 1937-41 Ford V8. Includes adaptor plate, 6 volt condenser and coil wire.
            
  • J&J Auto Racing 101024C9 MSD Ignition And Coil Mount
    J&J Auto Racing 101024C9 MSD Ignition And Coil Mount
    (Part #940101024)
    x
                
    • Lightweight aluminum construction
    • Holds MSD spark box and Tel Tach
    • Quickly quarter turn fastener on and off dash
  • MSD 2971 Atomic LS Coil Covers - LS2, LS3, LS7 Black
    MSD 2971 Atomic LS Coil Covers - LS2, LS3, LS7 Black
    (Part #5472971)
    x
                

     If you desire a clean and customized look to your engine compartment, our new Atomic LS coil covers are designed to fit over the valve covers and coil assemblies to effectively hide the coil packs and wiring. The cast aluminum covers align with the Atomic Smart Fuel Rail assemblies and provide a completely smooth contoured finish to the edge of the valve cover. The Atomic Coil Covers will work with OEM coils as well as MSD's Multiple Sparking Coils.

    • Fits over valve covers and coil assemblies
    • Smooth Contoured Finish
    • Works with OEM coils and MSD's Multiple Sparking Coils
    • Sold Individually
    • LS2, LS3, LS7

    Installation Instructions (PDF) 

  • MSD 84039 Replacement Coil Wire
    $14.99
    $15.99
    MSD 84039 Replacement Coil Wire
    (Part #54784039)
    x
                

    Coil socket terminal and boot on one side with a HEI distributor cap socket terminal and boot on the other. 18" long.

    MSD Rebate (Link)

  • MSD 29721 Atomic LS Coil Covers - LS1, LS6, Raw
    MSD 29721 Atomic LS Coil Covers - LS1, LS6, Raw
    (Part #54729721)
    x
                

     If you desire a clean and customized look to your engine compartment, our new Atomic LS coil covers are designed to fit over the valve covers and coil assemblies to effectively hide the coil packs and wiring. The cast aluminum covers align with the Atomic Smart Fuel Rail assemblies and provide a completely smooth contoured finish to the edge of the valve cover. The Atomic Coil Covers will work with OEM coils as well as MSD's Multiple Sparking Coils.

    • Fits over valve covers and coil assemblies
    • Smooth Contoured Finish
    • Works with OEM coils and MSD's Multiple Sparking Coils
    • Sold Individually
    • LS1, LS6

    Installation Instructions (PDF) 

  • Chrome Coil Mounting Bracket
    Chrome Coil Mounting Bracket
    (Part #91017490)
    x
                These chrome coil mounting brackets fit over stock coils. Adjustable from 2-1/8" to 2-5/16" with slight modification. 
            
  • MSD 8214 Coil Ballast Resistor 0.8 ohm
    MSD 8214 Coil Ballast Resistor 0.8 ohm
    (Part #5478214)
    x
                For use with an MSD Blaster Coil when connected to a stock points ignition system.
    • Use with older points style ignitions

Filter

"Ignition, Ignition Coils" Page 1 of 5

Page 1 of 5

  • MSD 29711 Atomic LS Coil Covers - LS1, LS6, Black
    MSD 29711 Atomic LS Coil Covers - LS1, LS6, Black
    (Part #54729711)
    x
                

     If you desire a clean and customized look to your engine compartment, our new Atomic LS coil covers are designed to fit over the valve covers and coil assemblies to effectively hide the coil packs and wiring. The cast aluminum covers align with the Atomic Smart Fuel Rail assemblies and provide a completely smooth contoured finish to the edge of the valve cover. The Atomic Coil Covers will work with OEM coils as well as MSD's Multiple Sparking Coils.

    • Fits over valve covers and coil assemblies
    • Smooth Contoured Finish
    • Works with OEM coils and MSD's Multiple Sparking Coils
    • Sold Individually
    • LS1, LS6

    Installation Instructions (PDF) 

  • MSD 8248 Blaster Coil 5.0L Coyote
    MSD 8248 Blaster Coil 5.0L Coyote
    (Part #5478248)
    x
                The all new Ford 5.0L Coyote engine is hot, but MSD now offers a coil that will make it even hotter! MSD developed a replacement coil that incorporates improved windings and material to increase the output of the coil. Also, when other modifications are being added, you can rely on the Blaster Coil to recover quicker through high rpm with a powerful spark to promote combustion.
    • Improved high rpm operation
    • Patented winding design and materials
    • Direct bolt-in to factory connectors
    • 3.33402777777778
    • .51 ohms
    • Intnal Diode
    • 1.9 mH
    • 100 mA
    • 120 us
    • 48 mj
    • 32KV
  • MSD 84049 Coil Wire for Blaster Coil, Socket Cap
    MSD 84049 Coil Wire for Blaster Coil, Socket Cap
    (Part #54784049)
    x
                Coil wire for use with Blaster Coil and Socket style cap.
            
  • MSD 2970  Atomic LS Coil Covers LS2, LS3, LS7, Red
    MSD 2970 Atomic LS Coil Covers LS2, LS3, LS7, Red
    (Part #5472970)
    x
                

     If you desire a clean and customized look to your engine compartment, our new Atomic LS coil covers are designed to fit over the valve covers and coil assemblies to effectively hide the coil packs and wiring. The cast aluminum covers align with the Atomic Smart Fuel Rail assemblies and provide a completely smooth contoured finish to the edge of the valve cover. The Atomic Coil Covers will work with OEM coils as well as MSD's Multiple Sparking Coils.

    • Fits over valve covers and coil assemblies
    • Smooth Contoured Finish
    • Works with OEM coils and MSD's Multiple Sparking Coils
    • Sold Individually
    • LS2, LS3, LS7

    Installation Instructions (PDF) 

  • MSD 82488 Blaster Coil 5.0L Coyote Set of 8
    MSD 82488 Blaster Coil 5.0L Coyote Set of 8
    (Part #54782488)
    x
                

    The all new Ford 5.0L Coyote engine is hot, but MSD now offers a coil that will make it even hotter! MSD developed a replacement coil that incorporates improved windings and material to increase the output of the coil. Also, when other modifications are being added, you can rely on the Blaster Coil to recover quicker through high rpm with a powerful spark to promote combustion.

    MSD Rebate -  October 1, 2014 - October 31, 2014

    • Improved high rpm operation
    • Patented winding design and materials
    • Direct bolt-in to factory connectors
    • 3.33402777777778
    • .51 ohms
    • Intnal Diode
    • 1.9 mH
    • 100 mA
    • 120 us
    • 48 mj
    • 32KV
  • PerTronix 45001 Flame-Thrower II Chrome Coil
    PerTronix 45001 Flame-Thrower II Chrome Coil
    (Part #44745002)
    x
                

    Flame-Thrower II coils feature a super low 0.6 Ohm primary resistance which make them the ideal coil for Ignitor II ignition systems, Flame-Thrower billet distributors, as well as many other high energy ignitions. Low resistance and improved turns ratio help to produce up to 45,000 volts. This higher voltage enables you to run larger spark plug gaps for added power and better fuel economy.

    These coils are also compatible with most capacitive discharge boxes.

  • HRP HRP0088F Coil Mount Bracket
    HRP HRP0088F Coil Mount Bracket
    (Part #91637083)
    x
                Eliminate stress to your dash by welding this bracket to your motor plate upright.  Slotted 3/8" coil mounting holes.
            
  • MSD 8287 Multiple Spark Plug Coil for LS2, LS3, LS7 Engines, Single
    MSD 8287 Multiple Spark Plug Coil for LS2, LS3, LS7 Engines, Single
    (Part #5478287)
    x
                Click here identify your LS coil. MSD Ignitions Multiple Spark Coils (MSC) will fit in place of the stock Gen-III GM coils and connect directly to the factory connec­tors. Once installed, youll have the power and performance of higher energy sparks, crowned with MSDs multiple spark discharge. Increased spark energy and voltage, along with multiple spark capabilities, help improve the combustion process of the fuel mix­ture to create an efficient burn. This results in improved throttle response, smooth idle and quick starts, plus increased high rpm performance!There are two types of housings for the MSD Coils. Check your ap­plication for the visual match.

    Installation Instructions (PDF)

    • Improved spark energy and voltage output
    • Patented winding design and materials
    • Direct bolt-in to factory connectors
    • 2.41736111111111
    • .48 ohms
    • 2.2K ohms
    • 1.9mH
    • 124
    • 833 us
    • 70 mj
    • 40KV
  • MSD 8242 Ford Coil on Plug SOHC 4.6L And 5.4L 2V Single
    MSD 8242 Ford Coil on Plug SOHC 4.6L And 5.4L 2V Single
    (Part #5478242)
    x
                The improved spark energy and voltage of MSDs Blaster 2 Coils, combined with reliability, have made them a favorite for performance enthusiasts. Whether firing a restored BOSS 429 or a Saturday night circle tracker, the Blaster 2 has always gotten the job done. MSD is excited to offer Blaster coils for late model Ford engines with Coil-on-Plug technology! The new Blaster CoPs are designed as a direct bolt-in replacement coil for many SOHC Modular Motors. The housing and installation are the same as the factory, but thats where the similarity ends. Inside the MSD red housing, engineers specd better material to assemble the primary and secondary windings.  The Coil-on-Plug design of the Blaster CoPs puts the spark energy right out of the coil and across the plug gap to improve the combustion and output of the engine. The Blaster 2 CoPs are available individually or as a complete set of eight.
    • 1999-2004 Fits 4.6L and 5.4L SOHC 2V
    • Improved spark energy and voltage output
    • Patented winding design and materials
    • Direct bolt-in to factory connectors
    • Factory replacement coil with improved spark energy and voltage.
    • .51 ohms
    • 5.7K ohms
    • 1.7 mH
    • 100 mA
    • 750 us
    • 38 mj
    • 25KV
  • Pertronix 45011 Flame-Thrower II Ignition Coil, 6 Volt, 0.6 Ohm
    Pertronix 45011 Flame-Thrower II Ignition Coil, 6 Volt, 0.6 Ohm
    (Part #44740011)
    x
                The hotter the spark, the easier your engine will start, and this 45,000 volt coil is just the ticket to a quick start! Has 0.6 ohms of resistance. Black case for a stock look.

    6 volt coils can be used with 6 volt point systems. If used with 12 volt point systems, it should have a 1.00 OHM resistor added.
  • PerTronix 60115 Flame-Thrower HV Coil, 1.5 Ohm
    PerTronix 60115 Flame-Thrower HV Coil, 1.5 Ohm
    (Part #44760115)
    x
                

    These high voltage E-core design coils by PerTronix put out an incredible 60,000 volts and are encased in a 6063 T-5 aluminum heat sink.

    • 1.5 Ohm primary resistance
    • 60,000 volts
    • 50 state legal

     

  • Clayton Machine LSC-02-B GM LS Coil Covers No Oil Fill Cut Out - Black
    New
    Clayton Machine LSC-02-B GM LS Coil Covers No Oil Fill Cut Out - Black
    (Part #231031)
    x
                

     These are designed to fit LS Crate motors and will not clear factory high mount alternators (such as those found on Corvettes) unless a cutout is fabricated or aftermarket alternator and brackets are used. They are best suited for aftermarket serpentine pulley systems.

    • Elegantly hides LS coil packs
    • Sold as a Pair
    • Fits GM LS engines utilizing existing coil bracket mounting points.
    • Machined from 6063-T6 aluminum
    • Black powder coated finish with machined highlights.
    • Can also be used with relocated coil packs for lower profile appearance
    • Dimensions: 19.5” x 5”

     

  • PerTronix 60104 Flame-Thrower HV Coil, 0.45 Ohm
    PerTronix 60104 Flame-Thrower HV Coil, 0.45 Ohm
    (Part #44760104)
    x
                

    These high voltage E-core design coils by PerTronix put out an incredible 60,000 volts and are encased in a 6063 T-5 aluminum heat sink. These coils are 50 state legal and are available with different resistance values for your application. Flame-Thrower HV .046 ohm coils are also compatible with most capacitive discharge boxes.

    • 0.45 Ohm primary resistance
    • 60,000 volts
    • 50 state legal

     

  • Crane Cams 7300040 Fire Ball Performance Ignition Coil, Chrome
    Crane Cams 7300040 Fire Ball Performance Ignition Coil, Chrome
    (Part #2880040)
    x
                

    Great as a high output replacement for OE electronic ignition and points applications on vehicles that require a conventional round coil. For general purpose use in applications when engine RPM does not exceed 6500 RPM. Includes ballast resistor for points applications. Fits most OE brackets.

    • Primary Resistance:  1.4 ohms
    • Secondary Resistance:  5.2 kohms
    • Primary Inductance:  7.5 mH
    • Secondary Inductance:  26H
    • Leakage Inductance:  1.3 mH
    • Turns Ratio:  60:1

    Designed for use with XR-i Points Conversion Kits.

  • 1933-36 Ford Flathead Coil Adapter Kit
    1933-36 Ford Flathead Coil Adapter Kit
    (Part #91015240)
    x
                These kits allow you to replace the original distributor mounted coil with a modern coil on your 1933-36 Ford V8.. Includes adaptor plate, 6 volt condenser and coil wire.
            
  • MSD 8211 Firewall Feed Thru, Red
    $16.99
    $18.99
    MSD 8211 Firewall Feed Thru, Red
    (Part #5478211)
    x
                To prevent voltage leaks in passenger compartment mounted coil installations, MSD designed the Firewall Feed-Thru. Molded from Rynite® and nylon, the Firewall Feed-Thru provides 1/2  of insula­tion to ensure that the coils spark reaches the distributor.

    Installation Instructions (PDF)

    • Absolutely the best way to route spark plug wire through the firewall
  • MSD 82568 Hemi Coil-on-Plug, 2003-05, 8-Pack
    MSD 82568 Hemi Coil-on-Plug, 2003-05, 8-Pack
    (Part #54782568)
    x
                Fire up your late model Hemi with a set of MSDs Blaster Coils. The Coils are a direct bolt-in and are specd with superior materials and winding ratios to improve the output of the coil while retaining the factory fit.

    Installation Instructions (PDF)

    MSD Rebate -  October 1, 2014 - October 31, 2014

    • Improved high rpm operation
    • Patented winding design and materials
    • Direct bolt-in to factory connectors
    • For early model Hemis, '03-'05
    • .6 ohms
    • 7.2K ohms
    • 3.6 mH
    • 72 mA
    • 1150 us
    • 62 mj
    • 35KV
  • PerTronix D3070 Flame-Thrower HEI Igniton Coil, Race Only
    PerTronix D3070 Flame-Thrower HEI Igniton Coil, Race Only
    (Part #4473070)
    x
                

    This ignition coil can be used as a replacement for the PerTronix Flame-Thrower HEI distributor 447-1071 or as a race only coil for your GM HEI distributor with an internal coil. When paired with matching module 447-2070, this coil will produce 42% more energy than a comparable street/strip coil with 46% faster spark breakdown time allowing 48% more peak current to reach the spark plug between 6000 and 8500 RPM.

    • 90:1 turn ratio
    • 0.35 Ohms primary resistance
    • 50,000 max voltage
    • Use with module 447-2070
  • Clayton Machine LSC-01-M GM LS Coil Covers with Oil Fill Cut Out Pass. Side
    New
    Clayton Machine LSC-01-M GM LS Coil Covers with Oil Fill Cut Out Pass. Side
    (Part #231030)
    x
                

    These coil covers are designed to fit LS Crate motors and will not clear factory high mount alternators (such as those found on Corvettes) unless a cutout is fabricated or aftermarket alternator and brackets are used. They are best suited for aftermarket serpentine pulley systems.

    • Elegantly hides LS coil packs
    • Sold as a Pair
    • Fits GM LS engines utilizing existing coil bracket mounting points.
    • Machined from 6063-T6 aluminum
    • Mill finish
    • Can also be used with relocated coil packs for lower profile appearance
    • Dimensions: 19.5” x 5”

     

  • MSD 82448 Ford Blaster COP 99-04 4.6L, 5.4L 4V DOHC, 8-Pack
    MSD 82448 Ford Blaster COP 99-04 4.6L, 5.4L 4V DOHC, 8-Pack
    (Part #54782448)
    x
                The housing and installation of our Ford Blaster Coil-on-Plugs are the same as the factory, but that's where the similarity ends. Inside the MSD red housing, engineers spec'd better material to assemble the primary and secondary windings.  The Coil-on-Plug design puts the spark energy right out of the coil and across the plug gap to improve the combustion and output of the engine.

    Installation Instructions (PDF)

    MSD Rebate -  October 1, 2014 - October 31, 2014

    • Fits 1999-2004 4.6L/5.4L DOHC 4V
    • Factory replacement
    • 3.12569444444444
    • .49 ohms
    • 5.6K ohms
    • 1.2mH
    • 70 mA
    • 600 us
    • 21 mj
    • 25KV
Goto Previous PagePrevious Page
1 2 3 4 5