Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Ignitions At Speedway Motors

Whether you're racing on the weekend or just cruising the streets, we have the ignition parts to spark your car to life. Speedway Motors carries the best in performance electronic distributors, spark plug wires, ignition boxes, coils, and spark plugs to power whatever you're driving. Ignite your passion with parts from top brands like MSD, Accel and Taylor Cable, all just a call or click away.

"Ignition, Distributors and Components" Page 1 of 11

  • HEI External Timing Adjustment Knob
    HEI External Timing Adjustment Knob
    SKU-91012344
    x
                

    This little jewel replaces the vacuum advance on an HEI distributor. This allows you to change the timing without having to loosen the distributor - just turn the knob.

    Fits V8 engine HEI distributor only.

  • Mallory Ignition 5072101 32-41 Flathead 3 Bolt Electronic Distributor
    Mallory Ignition 5072101 32-41 Flathead 3 Bolt Electronic Distributor
    SKU-5005071601
    x
                

    Mallory Magnetic Breakerless Electronic Distributor for 1932-1941 Ford Flathead V8 with the 3-bolt mount. Includes Mallory Super-Duty cap (points style) and rotor with brass terminals.

    • Adjustable mechanical advance
    • Self-lubricating bushings provide years of trouble-free service
    • Easy 3-wire hookup
    • Does not require an external control box
    • For 12 volt systems only

    500-5071601 Instructions (PDF)

     

    Note: This distributor requires 1.4 ohms of coil resistance. If you are using a coil with less than 1.4 ohms, you must us a ballast resistor that will achieve the required 1.4 ohm total resistance. If you are using coil # 447-45001, no resistor will be required.

  • PerTronix D7100801 Chevy Ignitor III Billet Distributor
    PerTronix D7100801 Chevy Ignitor III Billet Distributor
    SKU-44771801
    x
                

    PerTronix Plug-n-Play Ignitor III Flame-Thrower billet distributors give you CD ignition box performance without the box! Ignitor III systems produce multiple sparks through the entire RPM range, but DO NOT require an external ignition "box." Plus, the Ignitor III module has an adaptive dwell feature which maintains peak energy throughout the entire RPM range.

    1. Does NOT have provisions for a vacuum advance. 
    2. Can be used with most ignition coils 0.6 Ohms or greater.
    3. For 12 volt negative ground systems. Requires 12-14 Volts.
    4. Must use suppression spiral core ignition wires (not solid core wires).
    5. NOT for use with CD or multiple spark systems.
    6. Lobe sensor design triggers off the point cam or reluctor and does not require a magnet sleeve.
    7. Not intended for marine use.

    Does NOT have a vacuum advance and comes with an iron distributor gear. Red, points-style socket cap. For S/B and B/B Chevy. 

    447-71801 Instructions (PDF)

  • Speedway Points Type Cap for Chevy V8
    Speedway Points Type Cap for Chevy V8
    SKU-91012332
    x
                Speedway points type cap for 1957-1974 Chevy V8. Direct replacement for MSD cap #8437. Cap uses the "L" shaped attaching hardware.
            
  • MSD 8581 Ford 351C-460 Bronze Distributor Gear
    New
    MSD 8581 Ford 351C-460 Bronze Distributor Gear
    SKU-5478581
    x
                MSD Bronze Distributor gears are machined from quality AMPCO 45 aluminum bronze containing 5% nickel. This special com­bination creates high-strength gear teeth that are less prone to wear even with high-volume oil pumps.

    Installation Instructions (PDF)

    • Increased outer hardened layer thickness (RC 55-60).
    • Micro polished surface for smooth contact.
    • Proprietary formulated ductile iron.
    • Melonite QPQ coated reduces friction and initial wear.
    • Interstitial carbide concentration improves wear resistance and
  • Chevy V8 Mag-Look Electronic Distributors
    Chevy V8 Mag-Look Electronic Distributors
    SKU-91012550
    x
                

    If you don't want a magneto, but love the looks, get one of these electronic distributors! These fully self-contained distributors feature full centrifugal advance for ease of starting along with a 3-wire hook-up that anyone can handle. All modern electronics give you a "State-of-the-Art" ignition system.

    • 3-1/2" in diameter
    • 8-3/4" tall (above mount flange)
    • Billet 6061-T6 housing 
    • High output 2.5 amp internal ignition coil
    • Electronic pickup
    • Customizeable advance mechanism
    • Ballast Resistor included - must be utilized per included instructions
    • 2-Red wires for Ballat Resistor W/ 3rd brown wire for Tach provided

    Fits Small Block and Big Block Chevy V8.

  • MSD 8545 Chrysler 383,400 Pro-Billet Distributor
    New
    MSD 8545 Chrysler 383,400 Pro-Billet Distributor
    SKU-5478545
    x
                Since many Chrysler enthusiasts use the B1 head or aftermarket valve cov­ers, these Pro-Billet Chrysler Distributors have been designed with a small diameter housing. This allows the distributors to fit tight block and head combinations.

    Installation Instructions (PDF)

    • Smaller diameter CNC machined billet aluminum housing and billet aluminum base clears aftermarket heads and valve covers
    • Easy-to-adjust mechanical advance with supplied springs and stop bushings
    • Maintenance-free magnetic pickup and precision reluctor create stable trigger signals throughout the rpm range
    • Polished steel shaft is QPQ coated and guided by two sealed ball bearings
    • Advance plate and weights are fine blanked from chrome moly steel and QPQ coated for friction reduction
    • Mechanical advance assembly can be locked out for crank trigger systems
    • Advance weight pins are staked and tig welded to the plate
    • Nylon pads ensure smooth operation of the advance weights
    • Supplied with small diameter cap with HEI style terminals and race rotor (will accept 8441 Cap-A-Dapt)
    • Must be used with an MSD Ignition Control
    • No CARB Exemption Order Number
  • MSD 8489 Chevy Crab Cap Crank Trigger Distributor
    New
    MSD 8489 Chevy Crab Cap Crank Trigger Distributor
    SKU-5478489
    x
                Please view the product's page for more information
            
  • MSD 8573 1949-53 Flathead Ford V8 Electronic Distributor
    MSD 8573 1949-53 Flathead Ford V8 Electronic Distributor
    SKU-5478573
    x
                

    Early Flathead racers and cruisers alike will be excited to see these front mount flathead distributors! MSD Ready-to-Run distributors do not need an external control box, so there's a simple and clean installation with only three wires to connect. Features a maintenance free magnetic pickup for unsurpassed reliability. Has HEI style terminals.  For 12 volt negative ground applications only.

    Designed for 1949-1953 Ford Flathead V8 engines.

    547-8573 Instructions (PDF)

    MSD Rebate (Link)

     

  • MSD 8431 Distributor Cap for PN 8570, 8545, 8546
    New
    MSD 8431 Distributor Cap for PN 8570, 8545, 8546
    SKU-5478431
    x
                MSD molds our most popular V8 distributor caps in-house. These caps are injection molded from DuPont® Rynite material and feature spark plug-style terminals. These terminals offer improved locking connections and the Rynite material is extremely strong wi
            
  • MSD 8110 Dist. Hold Down Clamp, Billet, Chevrolet
    MSD 8110 Dist. Hold Down Clamp, Billet, Chevrolet
    SKU-5478110
    x
                MSDs Billet Distributor Hold Down Clamps are strong enough to keep the timing locked in place whether you are using an MSD Billet Distributor or Pro Mag. The MSD Hold Down Clamp is CNC machined from steel and fits all MSD Pro-Billet Chevrolet distributors and the Pro Mags. Each clamp includes the mounting stud, lock washer and nut.

    Installation Instructions (PDF)

    • MSD 8456 Ford 5.0L Pro-Billet Distributor
      $269.99
      $390.99
      New
      MSD 8456 Ford 5.0L Pro-Billet Distributor
      SKU-5478456
      x
                  Please view the product's page for more information
              
    • MSD 8528 Pontiac V8 Ready to Run Distributor
      New
      MSD 8528 Pontiac V8 Ready to Run Distributor
      SKU-5478528
      x
                  Please view the product's page for more information
              
    • Mallory Ignition 5027501 1949-53 Ford Flathead Electronic Distributor
      Mallory Ignition 5027501 1949-53 Ford Flathead Electronic Distributor
      SKU-5005027501
      x
                  

      Tried and true Mallory electronic distributor for your 1949-1953 Flathead Ford. Features magnetic breakerless ignition technology for greatly improved accuracy versus points-style distributors. For 12 volt systems only.

      • Easy 3-wire hookup
      • Adjustable mechanical advance
      • Self-lubricating bushings provide years of trouble-free service
      • Includes Mallory Super-Duty Cap and Rotor with brass terminals
      • Distributor drive gear not included (sold separately)

      Note: This distributor requires 1.4 ohms of coil resistance. If you are using a coil with less than 1.4 ohms, you must use a ballast resistor that will achieve the required 1.4 ohm total resistance. If you are using coil # 447-45001, no resistor will be required.

      500-5027501 Instructions (PDF)

    • Performance Distributors S127212 Stealth Race Chevy HEI Distributor
      Performance Distributors S127212 Stealth Race Chevy HEI Distributor
      SKU-91012001
      x
                  

      The Stock Appearing "Stealth" version is available for those who want a totally OEM looking distributor. The Stealth version has all of the same features of the regular Racing D.U.I. except  that it is built with a black distributor cap, unpolished housing and no decals for that "bone stock"
      HEI look. Has 100% new components.

      • Fits SB & BB Chevrolet
      • Capable of turning 9000 RPM
      • No external spark boxes or coils are needed
      • Easy drop-in installation with a one wire hookup
      • Sends 2-3 times more spark into the combustion chamber than a magneto
    • 392 Chrysler Hemi Mag-Look Electronic Distributors
      392 Chrysler Hemi Mag-Look Electronic Distributors
      SKU-91015290
      x
                  If you don't want a magneto, but love the looks, get one of these electronic distributors!

      These fully self-contained distributors feature full centrifugal advance for ease of starting along with 2-wire hook-up that anyone can handle. Has an internal coil. All modern electronics give you a "State-of-the-Art" ignition system.
    • MSD 8486 Super Tall Block Crab Cap Distributor, Chevy V8
      New
      MSD 8486 Super Tall Block Crab Cap Distributor, Chevy V8
      SKU-5478486
      x
                  Please view the product's page for more information
              
    • Mallory Ignition 221A 1932-48 Flathead Crab Style Distributor Caps
      Mallory Ignition 221A 1932-48 Flathead Crab Style Distributor Caps
      SKU-500221
      x
                  Replacement caps for Mallory distributors on 1932-48 Ford Flathead V8s.
              
    • MSD 84674 Race Rotor for PN 8488 Distributor
      New
      MSD 84674 Race Rotor for PN 8488 Distributor
      SKU-54784674
      x
                  
      • Flathead Ford Distributor Adaptor, 2-Bolt Distributor to 3-Bolt
        Flathead Ford Distributor Adaptor, 2-Bolt Distributor to 3-Bolt
        SKU-9103241
        x
                    

        Sometimes we want to mix and match parts different than Henry planned. These spacers allow you to swap distributors around on your flathead. This adaptor fits most aftermarket performance cams. In some cases, earlier stock engines may have a "shallow-nose" camshaft. If that is the case, the drive tang on the distributor will not contact the slot in the cam and the distributor will spin freely after installation. Should this occur, you will need to purchase a cam button spacer such as Speedway # 910-12710.

      • Mallory Ignition 339 Distributor Rotor/Shutter Wheel, 6-Cylinder Motor
        Mallory Ignition 339 Distributor Rotor/Shutter Wheel, 6-Cylinder Motor
        SKU-500339
        x
                    

        Mallory distributor rotors are constructed from top quality material and designed to fit your application for long lasting performance.

        • Mallory 339
        • Distributor Rotor
        • Mallory 45, 46 Series
        • Sold each 
      • Stock HEI Replacement Module and Harness
        Stock HEI Replacement Module and Harness
        SKU-91012338
        x
                    This HEI module and attachment harness comes in our distributor part #910-12335. This HEI replacement will work in an operation to 6,500+ RPM. Samples were tested to 7,000 RPM. 

        Contains one blue module and one black connector and harness to attach to cap.
      • MSD 2359 Pro-Billet Cam Sync Distributor, Ford 289, 302, Iron gear
        New
        MSD 2359 Pro-Billet Cam Sync Distributor, Ford 289, 302, Iron gear
        SKU-5472359
        x
                    This new Pro-Billet Distributor features an adjustable cam sync pickup as well as a magnetic pickup inside the distributor to trigger the ignition control. The Hall-effect sync pickup is adjustable up to 60° BTDC to meet the needs of most aftermarket ECUs and even is crimped with a common 2-pin Weathertight connector. A great new feature is the two piece adjustable rotor that is supplied. This assists in setting up the proper rotor phasing for accurate timing and spark control. Each Cam Sync Distributor is topped with MSD's adjustable two piece rotor to provide rotor phasing adjustments. This distributor must be used with an MSD 6, 7, 8 or 10-Series Ignition.

        Installation Instructions (PDF)

        Installation Instructions (PDF)

        • MSD 8517 Buick V8 400-455 Billet Distributor
          New
          MSD 8517 Buick V8 400-455 Billet Distributor
          SKU-5478517
          x
                      Please view the product's page for more information
                  
        • Bronze Chevy/Vertex Distributor Drive Gears
          Bronze Chevy/Vertex Distributor Drive Gears
          SKU-91511990
          x
                      

          Use bronze distributor gears to eliminate gear galling and breaking. Recommended for use with performance steel alloy and billet cams.

          For OEM Chevy distributors and Vertex magnetos with a .490" shaft.

        • Adjustable Vacuum Advance Kit, GM HEI Distributor
          Adjustable Vacuum Advance Kit, GM HEI Distributor
          SKU-28799600
          x
                      

          Adjust your GM HEI distributor for any driving condition. This kit allows you to change the amount of ignition vacuum advance for maximum part-throttle performance while preventing the harmful effects of spark knock (detonation). Dial in as much spark advance as conditions permit — add more advance under light load conditions to improve throttle response and fuel economy, or limit spark advance in high compression engines and high load conditions to eliminate knock.

          • Built-in stop prevents the adjustment screw from "backing out" like other designs
          • Easy to install
          • Includes 3/32" Allen wrench and easy-to-follow instructions

          287-99600 Instructions (PDF)

        • MSD 8504 Chrysler, 318, 340, 360, E-Curve Distributor
          New
          MSD 8504 Chrysler, 318, 340, 360, E-Curve Distributor
          SKU-5478504
          x
                      The Digital E-Curve Distributor will drop right in your engine, easily connect to the coil and fire up! There are no external controls or boxes to mount and connect, and you can set a timing curve with the twist of a rotary dial!

          Installation Instructions (PDF)

          • Digitally controlled, stand-alone distributor.
          • Adjustable electronic advance with vacuum advance.
          • Select up to 100 different curves through two rotary dials.
          • High output ignition module for a powerful spark.
          • Set a rev limit to protect your engin
        • 331-354 Chrysler Hemi Mag-Look Electronic Distributors
          331-354 Chrysler Hemi Mag-Look Electronic Distributors
          SKU-91015280
          x
                      

          If you don't want a magneto, but love the looks, get one of these electronic distributors!

          These fully self-contained distributors feature full centrifugal advance for ease of starting along with 2-wire hook-up that anyone can handle. Has an internal coil. All modern electronics give you a "State-of-the-Art" ignition system.

        • Ford 292-312 Y-Block Mag-Look Electronic Distributors
          Ford 292-312 Y-Block Mag-Look Electronic Distributors
          SKU-91015270
          x
                      If you don't want a magneto, but love the looks, get one of these Ford 292-312 Y-Block electronic distributors!

          These fully self-contained Ford Y-Block distributors feature full centrifugal advance for ease of starting along with 2-wire hook-up that anyone can handle. Has an internal coil. All modern electronics give you a "State-of-the-Art" ignition system.
        • MSD 8452 Ford TFI EFI 351W With Module Pro-Billet Distributor
          New
          MSD 8452 Ford TFI EFI 351W With Module Pro-Billet Distributor
          SKU-5478452
          x
                      Please view the product's page for more information
                  
        • MSD 8520 GM Big Block Front Drive Distributor
          New
          MSD 8520 GM Big Block Front Drive Distributor
          SKU-5478520
          x
                      MSDs Pro-Billet Front Drive distributor is the solution for race engines that dont have room for a standard distributor due to firewall clearance or intake combinations. The MSD Front Drive distributor is belt-driven from a pulley installed on the camshaft. For increased strength and durability a 9mm belt is used which is wider than any other drive assembly. The distributor head is CNC-machined from a billet of aluminum and is secured to a strong precision bracket. This system is an extremely accurate way to distribute the spark energy from your MSD Ignition! We revised the front drive with our standard Ford-style cap and rotor. This creates a downsized package for an easier fit in tight engine compartments. The Front Drive distributor is supplied with mounting bolts, cam pulley and drive belt.

          Installation Instructions (PDF)

          • Billet aluminum construction for strength and precise operation.
          • Standard size Ford style cap features brass terminals and a wire retainer.
          • Wide, 9mm belt for the most secure operation.
          • Provisions for belt tension adjustments.
          • NOTE: Must be used with a Jesel or Comp Cams Camshaft Belt Drive Kit and an MSD Flying Magnet Crank Trigger.
          • (Will not fit raised cam big blocks such as Merlin, Donovan or Dart blocks or Gen V or Gen VI.)
        • MSD 84313 Black Distributor Cap for PN 8570, 8545, 8546
          New
          MSD 84313 Black Distributor Cap for PN 8570, 8545, 8546
          SKU-54784313
          x
                      MSD molds our most popular V8 distributor caps in-house. These caps are injection molded from DuPont® Rynite material and feature spark plug-style terminals. These terminals offer improved locking connections and the Rynite material is extremely strong wi
                  
        • Distributor Gear Shim Kit
          $4.99
          Product Rating: 4.00 Stars
          Distributor Gear Shim Kit
          SKU-54526140
          x
                      

          These shims are used to take up the slop between the distributor gear and the distributor housing. Allows you to set the endplay of your distributor shaft. Designed to work with distributors having a shaft diameter of 1/2". The gear must be removed to install these shims.

          Includes two .010", two .020" and one .053" shim.

        • MSD 7408 Pro Cap, Fits 7445,7455
          $49.99
          $55.99
          New
          MSD 7408 Pro Cap, Fits 7445,7455
          SKU-5477408
          x
                      
                  
        • PerTronix D100701 Chevy Flame-Thrower Distributor
          PerTronix D100701 Chevy Flame-Thrower Distributor
          SKU-44710070
          x
                      Please view the product's page for more information
                  
        • MSD 8457 Rotor, Includes Base, Fits LP CT Distributors, PN 84697
          New
          MSD 8457 Rotor, Includes Base, Fits LP CT Distributors, PN 84697
          SKU-5478457
          x
                      Molded from strong, durable Rynite material these rotors are designed specifically for MSD Crank Trigger Distributors. The rotor tip is secured with a screw for high rpm racing applications.

          Installation Instructions (PDF)

        Goto Previous PagePrevious Page
        1 2 3 4 5 ... 11